Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Base Composition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
NASA NTRS2013

Prediction of Composite Laminate Strength Properties Using a Refined Zigzag Plate Element

This study presents an approach that uses the refined zigzag element, RZE(exp2,2) in conjunction with progressive failure criteria to predict the ultimate strength of composite laminates based on only ply-level strength properties. The methodology involves four major steps: (1) Determination of accurate stress and strain fields under complex loading conditions using RZE(exp2,2)-based finite element analysis, (2) Determination of failure locations and failure modes using the commonly accepted Hashin's failure criteria, (3) Recursive degradation of the material stiffness, and (4) Non-linear incremental finite element analysis to obtain stress redistribution until global failure. The validity of this approach is established by considering the published test data and predictions for (1) strength of laminates under various off-axis loading, (2) strength of laminates with a hole under compression, and (3) strength of laminates with a hole under tension.

Barut, Atila↗
NASA NTRS2013

Dust in the Solar System - Properties and Origins

Interplanetary dust pervades the inner Solar System, giving rise to a prominent glow above the horizon at sunrise and sunset known as the zodiacal light. This dust derives from the disintegration of comets as they approach the Sun and from collisions among main-belt asteroids. The Earth accretes roughly 4x10(exp 6) kg/year of 1 - 1,000 micron dust particles as they spiral into the Sun under the influence of Poynting-Robertson drag and solar wind drag. Samples of these grains have been collected from deep sea sediments, Antarctic ice and by high-altitude aircraft and balloon flights. Interplanetary dust particles (IDPs) collected in the stratosphere have been classified by their IR spectra into olivine, pyroxene, and hydrated silicate-dominated classes. Most IDPs have bulk major and minor element abundances that are similar to carbonaceous chondrite meteorites. Hydrated silicate-rich IDPs are thought to derive from asteroids based on their mineralogy and low atmospheric entry velocities estimated from peak temperatures reached during atmospheric entry. Anhydrous IDPs are typically aggregates of 0.1 - approx. 1 micron Mg-rich olivine and pyroxene, amorphous silicates (GEMS), Fe, Nisulfides and rare spinel and oxides bound together by carbonaceous material. These IDPs are often argued to derive from comets based on compositional similarities and high atmospheric entry velocities that imply high eccentricity orbits. Infrared spectra obtained from anhydrous IDPs closely match remote IR spectra obtained from comets. The most primitive (anhydrous) IDPs appear to have escaped the parent-body thermal and aqueous alteration that has affected meteorites. These samples thus consist entirely of grains that formed in the ancient solar nebula and pre-solar interstellar and circumstellar environments. Isotopic studies of IDPs have identified silicate stardust grains that formed in the outflows of red giant and asymptotic giant branch stars and supernovae]. These stardust grains include both amorphous and crystalline silicates. The organic matter in these samples also exhibits highly anomalous H, C, and N isotopic compositions that are consistent with formation in low temperature environments at the outermost regions of the solar nebula or presolar cold molecular cloud. The scientific frontiers for these samples include working toward a better understanding of the origins of the solar system amorphous and crystalline grains in IDPs and the very challenging task of determining the chemical composition of sub-micron organic grains. Laboratory studies of ancient and present-day dust in the Solar System thus reveal in exquisite detail the chemistry, mineralogy and isotopic properties of materials that derive from a range of astrophysical environments. These studies are an important complement to astronomical observations that help to place the laboratory observations into broader context.

Messenger, Scott↗
NASA NTRS2014

The Inclusion of Arbitrary Load Histories in the Strength Decay Model for Stress Rupture

Stress rupture is a failure mechanism where failures can occur after a period of time, even though the material has seen no increase in load. Carbon/epoxy composite materials have demonstrated the stress rupture failure mechanism. In a previous work, a model was proposed for stress rupture of composite overwrap pressure vessels (COPVs) and similar composite structures based on strength degradation. However, the original model was limited to constant load periods (holds) at constant load. The model was expanded in this paper to address arbitrary loading histories and specifically the inclusions of ramp loadings up to holds and back down. The broadening of the model allows for failures on loading to be treated as any other failure that may occur during testing instead of having to be treated as a special case. The inclusion of ramps can also influence the length of the "safe period" following proof loading that was previously predicted by the model. No stress rupture failures are predicted in a safe period because time is required for strength to decay from above the proof level to the lower level of loading. Although the model can predict failures during the ramp periods, no closed-form solution for the failure times could be derived. Therefore, two suggested solution techniques were proposed. Finally, the model was used to design an experiment that could detect the difference between the strength decay model and a commonly used model for stress rupture. Although these types of models are necessary to help guide experiments for stress rupture, only experimental evidence will determine how well the model may predict actual material response. If the model can be shown to be accurate, current proof loading requirements may result in predicted safe periods as long as 10(13) years. COPVs design requirements for stress rupture may then be relaxed, allowing more efficient designs, while still maintaining an acceptable level of safety.

Reeder, James R.↗
NASA NTRS2014

Evaluation of a Metallic Repair on a Rod-Stiffened Composite Panel

A design and analysis of a repair concept applicable to a stiffened composite panel based on the pultruded rod stitched efficient unitized structure was recently completed.The damage scenario considered was a midbay-to-midbay saw-cut with a severed stiffener, flange, and skin. Advanced modeling techniques such as mesh-independent definition of compliant fasteners and elastic-plastic material properties for metal parts were used in the finite-element analysis supporting the design effort. A bolted metallic repair was selected so that it could be easily applied in the operational environment. The present work describes results obtained from a tension panel test conducted to validate both the repair concept and finite element analysis techniques used in the design effort. The test proved that the proposed repair concept is capable of sustaining load levels that are higher than those resulting from the current working stress allowables. This conclusion enables upward revision of the stress allowables that had been kept at an overly conservative level due to concerns associated with repairability of the panels. Correlation of test data with finite-element analysis results is also presented and assessed.

Przekop, Adam↗
NASA NTRS2014

Vibro-Acoustic Modulation Based Damage Identification in a Composite Skin-Stiffener Structure

The vibro-acoustic modulation method is applied to a composite skin-stiffener structure to investigate the possibilities to utilize this method for damage identification in terms of detection, localisation and damage quantification. The research comprises a theoretical part and an experimental part. An impact load is applied to the skin-stiffener structure, resulting in a delamination underneath the stiffener. The structure is interrogated with a low frequency pump excitation and a high frequency carrier excitation. The analysis of the response in a frequency band around the carrier frequency is employed to assess the damage identification capabilities and to gain a better understanding of the modulations occurring and the underlying physical phenomena. Though vibro-acoustic is shown to be a sensitive method for damage identification, the complexity of the damage, combined with a high modal density, complicate the understanding of the relation between the physical phenomena and the modulations occurring. more research is recommended to reveal the physics behind the observations.

Ooijevaar, T. H.↗
NASA NTRS2015

Additive Manufacturing of SiC Based Ceramics and Ceramic Matrix Composites

Silicon carbide (SiC) ceramics and SiC fiber reinforcedSiC ceramic matrix composites (SiCSiC CMCs) offer high payoff as replacements for metals in turbine engine applications due to their lighter weight, higher temperature capability, and lower cooling requirements. Additive manufacturing approaches can offer game changing technologies for the quick and low cost fabrication of parts with much greater design freedom and geometric complexity. Four approaches for developing these materials are presented. The first two utilize low cost 3D printers. The first uses pre-ceramic pastes developed as feed materials which are converted to SiC after firing. The second uses wood containing filament to print a carbonaceous preform which is infiltrated with a pre-ceramic polymer and converted to SiC. The other two approaches pursue the AM of CMCs. The first is binder jet SiC powder processing in collaboration with rp+m (Rapid Prototyping+Manufacturing). Processing optimization was pursued through SiC powder blending, infiltration with and without SiC nano powder loading, and integration of nanofibers into the powder bed. The second approach was laminated object manufacturing (LOM) in which fiber prepregs and laminates are cut to shape by a laser and stacked to form the desired part. Scanning electron microscopy was conducted on materials from all approaches with select approaches also characterized with XRD, TGA, and bend testing.

3-D printing↗
NASA NTRS2018

Scaling Methodology for Buckling of Sandwich Composite Cylindrical Structures

The study of the buckling behavior of large shell structures through full-size tests can be complex and expensive. Therefore, scaled structures are often preferred to investigate the buckling behavior efficiently. However, it can be difficult to design scaled structures that are representative of the full-scale structures. Herein, an analytical scaling methodology for compression-loaded sandwich composite cylinders based on the nondimensionalization of the buckling equations is presented. The methodology is used to develop scaled configurations that show a similar buckling response. Both the baseline and the scaled configurations are verified by finite-element analysis. Limitations of the methodology are discussed and are a result of neglecting the flexural anisotropy and the transverse shear compliance.

Balbin, Ines Uriol↗
NASA NTRSDate not supplied

Isolating the Surface Type Influence on Arctic Cloud Properties

In response to anthropogenic climate change, substantial declines in sea ice have been observed. An urgent question is whether and how clouds respond to the changing Arctic surface. Due to the important radiative influence of clouds, the response of clouds to sea ice cover change constitutes a potentially important climate feedback within the Arctic. The sign of this feedback is strongly influenced by the seasonality of the cloud response to sea ice loss. Given the importance of this phenomenon, previous research focused on using observations of inter-annual variability to quantify the cloud-sea ice relationship. However, the reliance on inter-annual variability to assess the covariance between clouds and sea ice make it challenging to control for the influence of large-scale meteorology on the clouds. We have devised an approach that applies an in situ, airborne observational strategy to quantify the influence of surface type on Arctic clouds to satellite data. Our event-based method composites cloud property differences for ocean, marginal ice zone, and sea ice surface types for >5000 MIZ crossing events. We find that cloud properties in non-summer months below ~1.5 km are influenced by surface type such that greater cloud fraction and water content are found over ocean relative to sea ice regions. Results are statistically significantly at the 95% confidence level. During summer, the surface type does not influence the cloud properties. The primary cause of the surface type dependent cloud property differences is the thermodynamic profiles differences that occur between the two surface types: namely, ocean footprints are warmer, moister, have more positive surface turbulent fluxes and are less stable than their sea ice counterparts. We find that the differences in thermodynamic profiles by surface type that correspond to the cloud property differences also explains a significant portion of the variability across events. Our analysis provides evidence that the influence of surface type on cloud properties fundamentally occurs due to the inherent surface temperature differences between the surface types. Significant surface type influences on cloud properties are only found in the presence of surface temperature differences between the surface types and only non-summer months meet this criterion. A conceptual model of this process is as follows, fundamental properties of the ocean and sea ice surface types (e.g., surface albedo, heat capacity/thermal inertia, surface roughness, and thermal conductance) lead to systematic differences in the surface temperature by surface type. In response to this surface temperature difference, atmosphere boundary layer processes (including turbulent mixing and radiation) communicate the surface temperature differences to the lower atmosphere driving the greater stability over sea ice than ocean. These differences in the background thermodynamic state profiles between the surface types yield atmospheric conditions that are more conducive to cloud development over ocean than sea ice. The details of these boundary layer processes are sensitive to the surface type but may not be fundamental to the resulting thermodynamic structure and cloud differences. Thus, our results indicate that to accurately model that cloud response to sea ice loss in climate models the surface type properties that yield the systematic differences in ocean and sea ice temperature (e.g., surface albedo, surface turbulent fluxes parameters, and thermal conductance) must be accurately represented.

Arctic radiation budget↗
NASA NTRSDate not supplied

Varying Processing Parameters in the Development of Slurry-Based Oxide Bond Coat for Environmental Barrier Coatings

Silicon carbide (SiC)-based ceramic matrix composites (CMCs) are replacing nickel-base superalloys in some hot-section aircraft engine materials due to their lower density and higher working temperature. CMCs require an environmental barrier coating (EBC) for protection from corrosive combustion species. Current-generation EBCs consist of a rare earth silicate topcoat and a silicon bond coat; however, the relatively low melting point of silicon (1414°C) limits the upper use temperature of these coatings. To extend the capability of next-generation EBCs, an oxide-based bond coat capable of withstanding temperatures of up to 1480°C has been developed at NASA Glenn Research Center. In this study, the oxide-based bond coat was applied to monolithic SiC via a slurry coating process. Parameters including slurry particle size and viscosity were varied, and coating performance was evaluated after steam cycling at 1480°C. The effect of including different rare earth constituents in the bond coat was also explored.

R. I. Webster↗
NASA NTRS2024

Modeling Atmospheric Brown Carbon in the GISS ModelE Earth System Model

Brown carbon (BrC) is an absorbing organic aerosol (OA), primarily emitted through biomass burning (BB), which exhibits light absorption unique to both black carbon (BC) and other organic aerosols. Despite many field and laboratory studies seeking to constrain BrC properties, the radiative forcing (RF) of BrC is still highly uncertain. To better understand its climate impact, we introduced BrC to the One-Moment Aerosol (OMA) module of the GISS ModelE Earth system model (ESM). We assessed ModelE sensitivity to primary BrC processed through a novel chemical aging scheme and to secondary BrC formed from biogenic volatile organic compounds (BVOCs). Initial results show that BrC typically contributes a top-of-the-atmosphere (TOA) radiative effect of 0.04 W m −2 . Sensitivity tests indicate that explicitly simulating BrC (separating it from other OAs), including secondary BrC, and simulating chemical bleaching of BrC contribute distinguishable radiative effects and should be accounted for in BrC schemes. This addition of prognostic BrC to ModelE allows greater physical and chemical complexity in OA representation with no apparent trade-off in model performance, as the evaluation of ModelE aerosol optical depth against Aerosol Robotic Network (AERONET) and Moderate Resolution Imaging Spectroradiometer (MODIS) retrieval data, with and without the BrC scheme, reveals similar skill in both cases. Thus, BrC should be explicitly simulated to allow more physically based chemical composition, which is crucial for more detailed OA studies like comparisons to in situ measurement campaigns. We include a summary of best practices for BrC representation within ModelE at the end of this paper.

brown carbon aerosols↗
DOE OSTI2022

Modified La—Fe—Si magnetocaloric alloys

A magnetocaloric material comprising a La—Fe—Si based alloy composition that is compositionally modified to include a small but effective amount of at least one of Al, Ga, and In to improve mechanical stability of the alloy (substantially reduce alloy brittleness), improve thermal conductivity, and preserve comparable or provide improved magnetocaloric effects. The alloy composition may be further modified by inclusion of at least one of Co, Mn, Cr, and V as well as interstitial hydrogen.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Fiber and bundle orientations, matrix rich regions, and mechanical properties of fiber reinforced composites using thermal digital image correlation

Methods for assessing fiber and bundle orientations and mechanical properties of fiber reinforced composite materials using Thermal Digital Image Correlation (TDIC) are disclosed. In some examples, the method comprises exposing the composite material to a temperature change; imaging the composite material at a plurality of time points before, during and/or after the temperature change; and assessing the characteristic of the composite material based on the imaging. In others, temperature changes naturally occur during the cooling process after manufacturing can be employed for this method such as compression molding process, injection molding process, resin transfer molding processes and its variants.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Nickel-incorporated Oxide Composites for Fiber-Optic Based Gas Sensing

Numerous high-value applications within the energy sector involve environmental conditions that are incompatible with traditional sensor technology due to degradation of electrical interconnects, packaging, or the sensors themselves. These can include chemically harsh conditions, high temperature operation, or the presence of electromagnetic interference due to high voltage. The fiber optic platform, constructed of robust, electrically insulating glass or single crystal oxides, offers a versatile and often low cost per node solution to this problem, especially with the integration of distributed sensing techniques such as optical time-domain and frequency-domain reflectometry (OTDR, OFDR). A major challenge of gas and chemical sensing on the optical fiber platform is the fabrication of robust and stable sensing materials that interact quickly and reversibly to the presence of the target analytes. In this work, we discuss the utilization of nickel-incorporated oxides on evanescent-field optical fiber sensors for gas sensing under harsh conditions relevant to multiple energy infrastructure applications. This paper will discuss a Ni/GDC (Ni / Gd-doped ceria) based sensing layer targeting conditions relevant for high-temperature (up to at least 800oC) hydrogen sensing applications (e.g., for operation within a solid oxide fuel cell or electrolyzer). The impact of hydrogen at elevated temperatures on the optical properties of Ni/GDC will be shown and the material mechanisms for the optical response will be discussed.

gas sensors↗
DOE OSTI2024

Composite interlayer for lithium metal based solid state batteries and the method of making the same

A solid-state electrochemical cell that cycles lithium ions includes a solid-state electrolyte that defines a first major surface and an electrode that defines a second major surface. The solid-state electrochemical cell also includes an interfacial layer disposed between the first major surface of the solid-state electrolyte and the second major surface of the electrode. The interfacial layer may include an ion-conductor disposed in an organic matrix.

Chen, Mengyuan↗
NASA NTRS2010

Modification of a Macromechanical Finite-Element Based Model for Impact Analysis of Triaxially-Braided Composites

A macro level finite element-based model has been developed to simulate the mechanical and impact response of triaxially-braided polymer matrix composites. In the analytical model, the triaxial braid architecture is simulated by using four parallel shell elements, each of which is modeled as a laminated composite. For the current analytical approach, each shell element is considered to be a smeared homogeneous material. The commercial transient dynamic finite element code LS-DYNA is used to conduct the simulations, and a continuum damage mechanics model internal to LS-DYNA is used as the material constitutive model. The constitutive model requires stiffness and strength properties of an equivalent unidirectional composite. Simplified micromechanics methods are used to determine the equivalent stiffness properties, and results from coupon level tests on the braided composite are utilized to back out the required strength properties. Simulations of quasi-static coupon tests of several representative braided composites are conducted to demonstrate the correlation of the model. Impact simulations of a represented braided composites are conducted to demonstrate the capability of the model to predict the penetration velocity and damage patterns obtained experimentally.

Goldberg, Robert K.↗
NASA NTRS1990

Certification of damage tolerant composite structure

A reliability based certification testing methodology for impact damage tolerant composite structure was developed. Cocured, adhesively bonded, and impact damaged composite static strength and fatigue life data were statistically analyzed to determine the influence of test parameters on the data scatter. The impact damage resistance and damage tolerance of various structural configurations were characterized through the analysis of an industry wide database of impact test results. Realistic impact damage certification requirements were proposed based on actual fleet aircraft data. The capabilities of available impact damage analysis methods were determined through correlation with experimental data. Probabilistic methods were developed to estimate the reliability of impact damaged composite structures.

Rapoff, Andrew J.↗