Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BYPASSES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Biocompatible Co–P Metallic Glasses with Superior Degradation Tolerance in Physiological Environments

Metallic glasses represent a class of metallic alloys with a fully amorphous structure and attractive properties, making them promising in bioimplant applications. Here, the degradation tolerance of biocompatible cobalt–phosphorus (Co–P) metallic glasses was studied in a simulated physiological environment. The metallic glasses were synthesized in the form of coatings through a facile electrodeposition approach. This method utilizes their outstanding surface characteristics and bypasses the size limitations usually associated with their bulk counterparts. Further, the Co–P alloys showed exceptional tribological response with ~14% lower coefficient of friction and 2 orders of magnitude lesser wear rate compared to SS316 stainless steel. In addition, the Co–P alloys showed a 3 times higher hardness and 4 times higher hardness/modulus ratio compared to SS316, indicating better elastic recovery under dynamic shear stresses that are common in load-bearing bioimplants. The Co–P metallic glasses exhibited excellent hemocompatibility and cytocompatibility in terms of lower platelet adhesion, spreading, and aggregation, a hemolysis ratio lower than 1%, and enhanced surface wettability, suggesting a superlative performance in bioimplant applications.

36 MATERIALS SCIENCE↗

Construction of Inverse Metal–Zeolite Interfaces via Area-Selective Atomic Layer Deposition

The spatial confinement at metal–zeolite interfaces offers a powerful knob to steer the selectivity of chemical reactions on metal catalysts. However, encapsulating metal catalysts into small-pore zeolites remains a challenging task. Here, we demonstrate an inverse design of metal–zeolite interfaces, “metal-on-zeolite,” constructed by area-selective atomic layer deposition. This inverse design bypasses the intrinsic synthetic issues associated with metal encapsulation, offering a potential solution for the fabrication of task-specific metal–zeolite interfaces for desired catalytic applications. Infrared spectroscopy and several probe reactions confirmed the spatial confinement effects at the inverse metal–zeolite interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In-Situ Atomic-Scale Revelation of Amorphous Metallic Iron Formation during Hydrogen-Driven Reduction of Iron Oxides

The transition to hydrogen as a green reductant in metal production is critical for decarbonizing the metallurgical industry, yet atomic-scale mechanisms governing reduction pathways and phase evolution remain unresolved. Using in-situ environmental transmission electron microscopy, we identify a hidden pathway that reveals dynamic formation of amorphous metallic iron (Fe) during the hydrogen-driven reduction of ferrous oxides of Fe 3 O 4 and FeO. Real-time imaging uncovers three coexisting transformation routes: (i) Fe 3 O 4 → FeO, (ii) Fe 3 O 4 → amorphous Fe, and (iii) FeO → amorphous Fe. The resulting amorphous Fe exhibits fluid-like mobility, enabling its rapid aggregation and crystallization into core-shell nanostructures, with a crystalline core enveloped by an amorphous shell. Complementary ab initio molecular dynamics simulations trace the amorphous Fe formation to interfacial strain at the metal/oxide interfaces, where large lattice mismatches destabilize the metal lattice during initial metallization. This interplay between thermodynamics and kinetics governs phase evolution: thermodynamics favors a self-limiting amorphous Fe overlayer, while rapid oxide reduction kinetics drives amorphous overgrowth. Our findings demonstrate that amorphous intermediates bypass rate-limiting crystalline steps, providing mechanistic insights to optimize H 2 -based processes for sustainable steelmaking. In conclusion, these insights bridge the gap between macroscopic process engineering and atomic-scale dynamics, with broader implications for catalysis and nanostructured material synthesis, where oxide reduction pathways critically shape functional phases and microstructures.

36 MATERIALS SCIENCE↗

In Situ Transmission Electron Microscopy Explores a New Nanoscale Pathway for Direct Gypsum Formation in Aqueous Solution

In the modern construction industry, large gypsum (CaSO 4 ·2H 2 O) boards are manufactured through a two-step procedure, which features the heating of fine gypsum powders to form the intermediate plaster of Paris (bassanite, CaSO 4 ·0.5H 2 O) followed by hydration of the intermediate phase to form the final formed product. Here, we explore a novel pathway toward the fabrication of gypsum microneedles that bypasses formation of the intermediate bassanite phase. Using in situ liquid transmission electron microscopy, the dynamic behavior of fine gypsum powders in a calcium sulfate solution is investigated at the nanoscale and in real time. An oriented-attachment mechanism is found to dominate the direct transformation of gypsum nanoparticles to gypsum microneedles, where no intermediate phases are involved. Our experimental results advance the fundamental understanding of the dynamic interactions between gypsum and water. The proposed nanoscale pathway for gypsum evolution could potentially revolutionize the construction industry rooted in gypsum board manufacturing by promising a time- and energy-efficient mass production procedure. Finally, in addition, this work can inspire research efforts associated with geology, archeology, and biology, where historical significance is frequently deduced from gypsum-related discoveries.

36 MATERIALS SCIENCE↗

Depolymerization as a Design Strategy: Depolymerization Etching of Polymerization-Induced Microphase Separations

Thermally triggered depolymerization has traditionally been viewed through the lens of sustainability and recycling, not as a constructive tool for materials design. Herein, we show that selective, thermally triggered depolymerization to gaseous monomer serves as a solvent-free strategy for generating porosity in nanostructured polymer materials, offering a means to bypass the mass transport limitations inherent in conventional solution-based etching. As a demonstration platform, we employed polymerization-induced microphase separation (PIMS) to generate disordered bicontinuous block copolymer structures with embedded depolymerizable domains. By incorporating a methacrylate block susceptible to thermal depolymerization within a cross-linked, depolymerization-resistant styrenic matrix, we developed a process we term depolymerization etching of polymerization-induced microphase separations (DEPIMS). This approach enables highly selective and efficient domain removal via reversion to monomer to produce mesoporous materials with high surface areas (>200 m 2 /g). Subsequent surface functionalization yielded mesoporous adsorbents with tunable uptake kinetics and among the highest dye adsorption capacities reported for PIMS-derived materials, demonstrating the adaptability of the DEPIMS platform for chemical separations. DEPIMS can also be extended to a gram-scale, one-pot approach to yield mesoporous materials with recoverable monomer in under 12 h. These findings reposition thermal depolymerization from a sustainability tool to a broadly enabling strategy for scalable, on-demand fabrication of functional nanostructured materials.

Depolymerization↗

Inhibition of Amyloid β-Induced Lipid Membrane Permeation and Amyloid β Aggregation by K162

Alzheimer's disease (AD) is characterized by progressive neurodegeneration associated with amyloid β (Aβ) peptide aggregation. The aggregation of Aβ monomers (AβMs) leads to the formation of Aβ oligomers (AβOs), the neurotoxic Aβ form, capable of permeating the cell membrane. Here, we investigated the effect of a fluorene-based active drug candidate, named K162, on both Aβ aggregation and AβO toxicity toward the bilayer lipid membrane (BLM). Electrochemical impedance spectroscopy (EIS), atomic force microscopy (AFM), and molecular dynamics (MD) were employed to show that K162 inhibits AβOs-induced BLM permeation, thus preserving BLM integrity. In the presence of K162, only shallow defects on the BLM surface were formed. Apparently, K162 modifies Aβ aggregation by bypassing the formation of toxic AβOs, and only nontoxic AβMs, dimers (AβDs), and fibrils (AβFs) are produced. Unlike other Aβ toxicity inhibitors, K162 preserves neurologically beneficial AβMs. This unique K162 inhibition mechanism provides an alternative AD therapeutic strategy that could be explored in the future.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrocatalysis in CO 2 -Binding Organic Liquids with an Iron Porphyrin

Direct electrochemical upgrading of CO 2 in capture media is an attractive approach to carbon capture that can bypass the energy requirement for the thermal release of pure CO 2 . Here we investigate the electrocatalytic activity of iron(tetraphenylporphyrin) in the presence of organic solvents that convert into ionic liquids upon exposure to CO 2 . Four different solvent systems were tested, all of which capture CO 2 in the form of an alkyl carbonate (or carbamate) anion and an acidic ammonium cation. The electrocatalytic selectivity exhibited a strong dependence on the acidity of the capture medium, with the most basic solvent affording a high selectivity for production of CO instead of H 2 . Experimental and computational studies support a canonical mechanism in which the catalyst reacts with free CO 2 in solution, as opposed to a reaction with the alkyl carbonate that is present in high concentration. Kinetic analysis indicates that the rate-limiting step is changed from C–O protonolysis in traditional solvents to the binding of CO 2 in the capture media. Quantitative 13 C– 13 C EXSY revealed that the dissociation of the alkyl carbonate into free, solvated CO 2 is very rapid (~15 s –1 ) compared to the interconversion of HCO 3 – /CO 2 in aqueous solution. These results underscore the need to understand the mechanism and kinetics for both the release of captured CO 2 and its electrocatalytic conversion.

Carbon Dioxide↗

Pulsed Electrolysis Promotes Catalyst Activity in Dilute CO 2 Streams

Industrial CO 2 streams vary widely in composition, from pure to as low as 3%, posing challenges for purification or direct conversion. Electrochemical reduction offers a route for converting dilute CO 2 streams but faces severe mass transport limitations. This study demonstrates that pulsed electrolysis effectively overcomes these limitations, enhancing CO 2 electroreduction across variable feed compositions and current densities, particularly at low CO 2 concentrations and high current densities. At 25% CO 2 and 400 mA cm −2 , pulsing improved selectivity from 25.6 to 78.6%, production rate from 13.7 to 21.0 mol m −2 h −1 , and energy productivity from 0.77 to 2.59 mol kWh −1 . A dynamic, multiphysics continuum model confirms a 64% increase in CO 2 concentration within the catalyst layer during pulsing, resolving the transient chemical microenvironment. These findings establish pulsed electrolysis as a viable strategy for converting dilute industrial CO 2 streams into valuable feedstocks, bypassing costly pre-separation.

Orfali, Dania Muhieddine [New York University (NYU↗

Thermally Stable Perovskite Solar Cells by Systematic Molecular Design of the Hole-Transport Layer

With the burgeoning performance of metal halide perovskite solar cells (PSC), one of the biggest challenges to date is addressing device stability. Within the PSC device stack, charge-selective contact selection has been shown to considerably impact PSC stability. Recently, a triarylamine-based hole-transport layer (HTL) doped with its oxidized organic salt analogue (EH44/EH44-ox) has been shown to bypass the need for hygroscopic lithium salt dopants, enabling high PSC stability in ambient conditions. Despite these promising results, the improved stability came with a power conversion efficiency (PCE) penalty and poor performance above 30 degrees C. Broadening the applicability and understanding of this under-utilized dopant system, we report design criteria for stable, synthetically simple triarylamine-based organic hole transport materials (HTM) and their corresponding oxidized salts as HTL dopants for improved PSC efficiency and stability at elevated temperature. The triarylamine-based dopants must contain at least two para-electron donating groups for radical cation stabilization to prevent impurity formation (e.g., dopant reduction) which significantly reduces PSC fill factors (FF) and PCE. To further improve PSC FF and PCE, these dopants can be interchanged with respect to the HTL matrix. The stability of unencapsulated devices prepared with these three new HTLs, under constant load and illumination, considerably outperform both EH44/EH44-ox and Li+-doped spiro-OMeTAD controls at 50 degrees C. The ability to mix and match a stable dopant with a non-identical small-molecule-based HTL matrix for improved charge-transport properties broadens design scope for highly stable and cost-effective PSC without sacrificing performance.

14 SOLAR ENERGY↗

Reversing the Irreversible: Thermodynamic Stabilization of LiAlH 4 Nanoconfined Within a Nitrogen-Doped Carbon Host

A general problem when designing functional nanomaterials for energy storage is the lack of control over the stability and reactivity of metastable phases. Using the high-capacity hydrogen storage candidate LiAlH4 as an exemplar, we demonstrate an alternative approach to the thermodynamic stabilization of metastable metal hydrides by coordination to nitrogen binding sites within the nanopores of N-doped CMK-3 carbon (NCMK-3). The resulting LiAlH 4 @NCMK-3 material releases H 2 at temperatures as low as 126 °C with full decomposition below 240 °C, bypassing the usual Li 3 AlH 6 intermediate observed in bulk. Moreover, >80% of LiAlH 4 can be regenerated under 100 MPa H 2 , a feat previously thought to be impossible. Nitrogen sites are critical to these improvements, as no reversibility is observed with undoped CMK-3. Density functional theory predicts a drastically reduced Al–H bond dissociation energy and supports the observed change in the reaction pathway. Finally, the calculations also provide a rationale for the solid-state reversibility, which derives from the combined effects of nanoconfinement, Li adatom formation, and charge redistribution between the metal hydride and the host.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Negative Schottky Barriers and Spin-Polarized Fermi Crossings at WSe 2 /NbSe 2 Interfaces

Discovering and engineering spin-polarized surface states in the electronic structures of condensed matter systems is a crucial first step in the development of spintronic devices, wherein spin-polarized bands crossing the Fermi level can facilitate information transfer. Here, through nanofocused angle-resolved photoemission spectroscopy (nano-ARPES) and density functional theory-based calculations, we show that the interface between monolayer WSe 2 and metallic NbSe 2 exhibits a negative Schottky barrier height of ∼ −30 meV: the K-point valleys of the semiconducting layer are shifted by ∼800 meV to produce a surface-localized Fermi surface populated only by spin-polarized charge carriers. By increasing the WSe 2 thickness, the Fermi pockets can be moved from K to Γ, demonstrating tunability of novel semimetallic phases that exist atop a substrate additionally possessing charge density wave and superconducting phases. Together, this study provides a spectroscopic understanding into p-type, Schottky barrier-free interfaces, which are of urgent interest for bypassing the limitations of current-generation vertical field effect transistors, in addition to longer-term spintronics development.

2D material heterostructures↗

Purification of Single Photons by Temporal Heralding of Quantum Dot Sources

Efficient, high rate photon sources with high single-photon purity are essential ingredients for quantum technologies. Single-photon sources based on solid state emitters such as quantum dots are very advantageous for integrated photonic circuits, but they can suffer from a high two-photon emission probability, which in cases of noncryogenic environment cannot be spectrally filtered. Here we propose two temporal purification-by-heralding methods for using a two-photon emission process to yield highly pure and efficient single-photon emission, bypassing the inherent problem of spectrally overlapping biphoton emission at elevated temperatures. We experimentally emulate their feasibility on the emission from a single nanocrystal quantum dot at room temperature, exhibiting single-photon purities exceeding 99.5%, without a significant loss of single-photon efficiency. By utilizing these methods with commercially available components, nanocrystal quantum dots can be made realistic high-quality room-temperature sources for single photons. In conclusion, these approaches can also be applied for any indeterministic source of spectrally broadband photon pairs.

36 MATERIALS SCIENCE↗

Improving the Transformation Efficiency of Synechococcus sp. PCC 7002 via Methylome-Guided Premethylation of DNA

Cyanobacteria are promising microbial platforms for a diverse set of biotechnology applications, from living materials to photosynthetic chemical production, but are less well characterized than commonly engineered microbes such as Escherichia coli. This study facilitates genetic engineering in Synechococcus sp. PCC 7002, a fast-growing, halotolerant, and naturally competent strain, by identifying ten native methylation motifs and designing shuttle strains that mimic the native methylation state by expressing a subset of heterologous methyltransferases. DNA methylation in E. coli with as few as two active methyltransferases increased transformation efficiency up to 30-fold across four distinct integration sites in PCC 7002. This work provides an experimental framework to bypass native restriction-modification systems for efficient genome editing and metabolic engineering in nonmodel bacteria.

59 BASIC BIOLOGICAL SCIENCES↗

Contribution of Partial Charge Interactions and Base Stacking to the Efficiency of Primer Extension at and beyond Abasic Sites in DNA

During DNA synthesis, base stacking and Watson-Crick (WC) hydrogen bonding increase the stability of nascent base pairs when they are in a ternary complex. To evaluate the contribution of base stacking to the incorporation efficiency of dNTPs when a DNA polymerase encounters an abasic site, we varied the penultimate base pairs (PBs) adjacent to the abasic site using all 16 possible combinations. We then determined pre-steady-state kinetic parameters with an RB69 DNA polymerase variant and solved nine structures of the corresponding ternary complexes. The efficiency of incorporation for incoming dNTPs opposite an abasic site varied between 2- and 210-fold depending on the identity of the PB. We propose that the A rule can be extended to encompass the fact that DNA polymerase can bypass dA/abasic sites more efficiently than other dN/abasic sites. Crystal structures of the ternary complexes show that the surface of the incoming base was stacked against the PB's interface and that the kinetic parameters for dNMP incorporation were consistent with specific features of base stacking, such as surface area and partial charge-charge interactions between the incoming base and the PB. Without a templating nucleotide residue, an incoming dNTP has no base with which it can hydrogen bond and cannot be desolvated, so that these surrounding water molecules become ordered and remain on the PB's surface in the ternary complex. When these water molecules are on top of a hydrophobic patch on the PB, they destabilize the ternary complex, and the incorporation efficiency of incoming dNTPs is reduced.

08 HYDROGEN↗

Crystallographic and Catalytic Studies of the Peroxide-Shunt Reaction in a Diiron Hydroxylase

A diiron hydroxylase reaction typically begins by combination of O{sub 2} with a diferrous center to form reactive intermediates capable of hydrocarbon hydroxylation. In this natural cycle, reducing equivalents are provided by specific interactions with electron transfer proteins. The biological process can be bypassed by combining H{sub 2}O{sub 2} with a diferric center, i.e., peroxide-shunt catalysis. Here we show that toluene 4-monooxygenase has a peroxide-shunt reaction that is {approx}600-fold slower than catalysis driven by biological electron transfer. However, the toluene 4-monooxygenase hydroxylase-effector protein complex was stable in the presence of 300 mM H{sub 2}O{sub 2}, suggesting overall benign effects of the exogenous oxidant on active site structure and function. The X-ray structure of the toluene 4-monooxygenase hydroxylase-effector protein complex determined from crystals soaked in H{sub 2}O{sub 2} revealed a bound diatomic molecule, assigned to a cis-{mu}-1,2-peroxo bridge. This peroxo species resides in an active site position adjacent to the hydrogen-bonding substructure established by effector protein binding and faces into the distal cavity where substrate must bind during regiospecific aromatic ring hydroxylation catalysis. These results provide a new structural benchmark for how activated intermediates may be formed and dispatched during diiron hydroxylase catalysis.

59 BASIC BIOLOGICAL SCIENCES↗

Oxygen Vacancies Alter Methanol Oxidation Pathways on NiOOH

A thorough comprehension of the mechanism underlying the methanol oxidation reaction (MOR) on Ni-based catalysts is critical for future electrocatalytic design and development. However, the mechanism of MOR on these materials remains a matter of controversy. Herein, we combine in situ surface-enhanced infrared absorption spectroscopy (SEIRAS) and density functional theory (DFT) calculations to identify the active sites and determine the mechanism of MOR on monometallic Ni-based catalysts in alkaline media. The SEIRAS results show that formate and (bi)carbonate are formed after the commencement of the MOR with potential-dependent relative distributions. These spectroscopic results are in good agreement with the DFT-computed reaction profiles over an oxygen vacancy, suggesting that the MOR mainly proceeds through the formate-involving pathway, in which the early consumption of methanol yields formate as the major product, while increasing potential drives further oxidation of formate to (bi)carbonate. We also find a parallel pathway for the generation of (bi)carbonate at high potentials that bypasses the formation of formate. The two main pathways are thermodynamically more feasible than the one predominantly reported in the literature for MOR on NiOOH that involves CHO and/or CO as key intermediates. These DFT results are supported by spectroscopic evidence showing that no band associated with CHO or CO can be detected by SEIRAS, which is attributed to the nature of the oxygen vacancies as the active sites, suppressing deep dehydrogenation of CH 2 O to CHO. Furthermore, this work thus shows the promising role of defect engineering in promoting the electrocatalytic MOR activity and selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cooperative Atomically Dispersed Fe–N 4 and Sn–N x Moieties for Durable and More Active Oxygen Electroreduction in Fuel Cells

One grand challenge for deploying porous carbons with embedded metal–nitrogen–carbon (M–N–C) moieties as platinum group metal (PGM)-free electrocatalysts in proton-exchange membrane fuel cells is their fast degradation and inferior activity. Here, we report the modulation of the local environment at Fe–N 4 sites via the application of atomic Sn–N x sites for simultaneously improved durability and activity. We discovered that Sn–N x sites not only promote the formation of the more stable D2 FeN 4 C 10 sites but also invoke a unique D3 SnN x –Fe II N 4 site that is characterized by having atomically dispersed bridged Sn–N x and Fe–N 4 . This new D3 site exhibits significantly improved stability against demetalation and several times higher turnover frequency for the oxygen reduction reaction (ORR) due to the shift of the reaction pathway from a single-site associative mechanism to a dual-site dissociative mechanism with the adjacent Sn site facilitating a lower overpotential cleavage of the O–O bond. This mechanism bypasses the formation of the otherwise inevitable intermediate that is responsible for demetalation, where two hydroxyl intermediates bind to one Fe site. Lastly, a mesoporous Fe/Sn-PNC catalyst exhibits a positively shifted ORR half-wave potential and more than 50% lower peroxide formation. This, in combination with the stable D3 site and enriched D2 Fe sites, significantly enhanced the catalyst’s durability as demonstrated in membrane electrode assemblies using complementary accelerated durability testing protocols.

36 MATERIALS SCIENCE↗

From Nonclassical to Classical: Crystallization Seeds Reshape Nucleation Mechanisms

Crystalline seeds are widely employed in crystallization to accelerate nucleation and control product polymorphs; yet, their impact on nucleation mechanisms remains poorly understood. While homogeneous nucleation of crystals from solution often proceeds through nonclassical pathways involving amorphous intermediates, it is unclear how seeds that promote heterogeneous nucleation reshape these mechanisms and govern polymorph selection. Here, in this study, we provide the first direct evidence that crystalline seeds can bypass the need for amorphous intermediates as nucleation sites, converting nonclassical nucleation mechanisms into classical, monomer-by-monomer crystallization pathways. Using molecular dynamics simulations of zeolite synthesis, we uncover a complex reaction network of competing nucleation processes mediated by intermediate interfacial polymorphs. The interplay between thermodynamic stability and kinetic favorability of these interfacial polymorphs dictates nucleation outcomes, creating a dynamic balance between the interfacial polymorph stability and crystallization rates. Furthermore, we show that the synthesis environment-whether monomers or aggregates serve as reactants-profoundly impacts these pathways. At moderate supersaturation, seeds eliminate amorphous intermediates and promote classical nucleation, whereas high supersaturation or aggregate-based reactants favor nonclassical pathways, even in the presence of seeds. These findings establish a general framework for understanding how seeds govern crystallization mechanisms, with broad implications for controlling nucleation kinetics, polymorph selection, and material properties. While focused on zeolites, this work reveals insights that may be applicable to biominerals, pharmaceuticals, functional materials, and catalysts, providing a basis for engineering crystallization pathways in diverse applications.

Chu-Jon, Carlos [Univ. of Utah, Salt Lake City, UT↗