Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Attributes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Multi-axial and multi-energy channeling study of disorder evolution in ion-irradiated nickel

In this study, to better understand defect structure and the evolution of irradiation-induced damage in single crystal Ni, in situ Rutherford backscattering spectroscopy in channeling geometry (RBS/C) is performed along the <100>, <110>, and <211> axes with different probing beam energies. The RBS/C data reveal that damage evolution occurs in three steps. The first step at low doses (up to 0.2 dpa), characterized by a linear increase with dose, is related to the formation of point defects and small clusters. The second step in the intermediate dose range (0.2–1.0 dpa) shows a sublinear increase in disorder to saturation. This sublinear increase is due to the growth of defect clusters resulting from the interaction of irradiation-induced defects with already existing damage from previous ion impacts. The third step at high doses (1.0–32.4 dpa) exhibits a surprising decrease in the disorder level, which may be attributed to defect evolution from black spot defects to large dislocation loops that leads to strain relaxation. In addition, the damage extends much deeper than the predicted depths and is attributed to long-range defect migration effects confirmed by transmission electron microscopy (TEM) observations. Although similar damage evolution trends have been observed along all channeling directions, the disorder accumulation is largest along the <100> and <211> axes than observed along <110> axis. This “preferential” disordering process along <100> and <211> suggests that more defects are shielded by the <110> atomic rows than the two other axes. Finally, the co-existence of both uncorrelated displaced lattice atoms and dislocation loops in Ni irradiated at 1 ion/nm 2 is revealed by the energy-dependent RBS/C studies along all three axes. In contrast, dislocation loops and stacking fault tetrahedral are simultaneously present in the crystal structure of Ni irradiated at 100 ions/nm 2 that is consistent with previous molecular dynamics simulations and TEM observations.

36 MATERIALS SCIENCE↗

Raman signatures from age-dating PuO 2 since last calcination

The self-irradiation of PuO 2 has been shown to affect the attributes of fifteen vibrational bands in the Raman spectrum. The vibrational bands correspond to the Raman allowed vibrational mode T 2g , overtones, defects, and bands from electronic origin. Defects in the crystal lattice from low-calcination temperature and alpha decay origins are responsible for the changes in the band attributes (band position, full-width half maximum (FWHM), intensity). Crystal lattice defects are also responsible for the growth of the defect bands. The temporal behavior of the vibrational bands can be used to estimate the age of the material since last calcination. Laser annealing was used to reset the material to full crystallinity prior to the aging study. 240 PuO 2 , with an alpha decay rate of 3.67 greater than the decay rate of 239 PuO 2 , was primarily used to assess the alpha decay-induced damage within 3 years. The aging study focused on the time-dependent properties of the T 2g band and the growth of defect bands. The FWHM of the T 2g band and the ratio of the areas of the defect bands/T 2g band were measured through a time period in excess of 3 years. The data from this study were found very close to the data describing the temporal evolution of the lattice constant measured with the X-ray diffraction (XRD) technique. The local physical properties of the material measured with Raman spectroscopy and the lattice parameter constant measured with XRD indicates a strong correlation between the two techniques. Although both techniques provide similar age-dating information, in contrast to the few milligram quantities required for XRD, Raman spectroscopy requires a 10 µm diameter PuO 2 particle to provide an estimate of the material age since last calcination.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Understanding radiation effects in friction stir welded MA956 using ion irradiation and a rate theory model

We report an outstanding challenge in the manufacturing and joining of oxide dispersion strengthened steels is retaining the nanofeatures in the alloy throughout the fabrication and welding process. MA956 was friction stir welded with two different sets of welding parameters, resulting in a medium and high heat input. After welding, 5 MeV Fe ++ ion irradiations were performed at doses ranging from 50 to 200 dpa in the temperature range of 400 to 500°C. Post-irradiation characterization was performed with scanning transmission electron microscopy and energy-dispersive x-ray spectroscopy to investigate the Y-Al-O dispersoids, voids, and dislocations. After welding, the dispersoid microstructure coarsened, resulting in fewer and larger dispersoids regardless of heat input. After irradiation, the dispersoid behavior in the welded material was sensitive to temperature, exhibiting growth behavior attributed to Ostwald coarsening at 500 °C but a mixture of nucleation and more muted growth at 400 and 450 °C, attributed to competing mechanisms of radiation-enhanced diffusion and Ostwald coarsening. Void swelling correlated to heat input; being more prevalent in the welded conditions occurring at lower doses and in higher values relative to the base material. The low values of swelling despite microstructure coarsening caused by welding demonstrate the excellent swelling resistance of MA956, even after welding with the highest swelling values of 0.5% noted in the stir zone high heat input condition at 450 °C, 200 dpa. The dislocation behavior was inconsistent: the strongest trend was that network density was higher for welded versus base material, and an increase in loop diameter with temperature was observed. A rate theory model based on the observed microstructure suggests at high temperature interstitial loss to sinks was more likely to be dominant compared to mutual annihilation via point defect recombination, because of an increase of the radiation diffusion coefficient with temperature regardless of initial welded microstructure.

36 MATERIALS SCIENCE↗

Investigating microstructural evolution in SolidStir™ extruded oxide dispersion strengthened 14YWT alloy fuel cladding tube

Structural components for extreme environments require advanced materials and manufacturing processes. One such advanced material is oxide dispersion strengthened (ODS) Fe–14 wt.%Cr–3W–0.4Ti–0.3Y 2 O 3 (14YWT), which is developed for components to be used in Gen IV and fusion nuclear reactors. However, the conventional manufacturing processes to produce components, such as fuel cladding tubes, either do not retain the desired microstructural attributes or are costly and less efficient. As a result, a more attractive option is a novel manufacturing process developed on the principle of friction stir welding or processing (FSW/P) and commercially referred to as SolidStir™ Extrusion (SSE). Here this study used the SSE technique to study the manufacturing and microstructural evolution of a fuel cladding tube made of ODS 14YWT alloy. The cladding extrusion by the SSE technique involved the use of ball-milled 14YWT powders with Y, Ti, and O in the solid solution and the use of a specially designed W-25Re-Hf tool for consolidation and extrusion of the powders. A scanning electron microscope (SEM), electron backscattered diffraction (EBSD), and transmission electron microscope (TEM) were utilized for microstructural characterization. A Keyence microscope captured macrostructural photographs of the extruded tube. EBSD examination of the extruded tube on both transverse and longitudinal cross-sections showed the presence of dynamically recrystallized grains and revealed that the average grain size of the transverse cross-section was smaller than that of the longitudinal cross-section. The texture was weak and consisted of some amount of shear texture. The presence of nano-oxide clusters or precipitates of Y, Ti, and O (pyrochlores) in the extruded tube was determined by TEM. Aging heat treatment caused the average precipitate size to decrease and the density to increase compared to the as-processed condition. The results indicated that SSE is a viable tool for manufacturing fuel cladding tubes with the desired microstructural attributes.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Highly durable graphene nanoplatelets supported Pt nanocatalysts for oxygen reduction

We report graphene nanoplatelets (GNP), which exhibit the advantages of both single-layer graphene and highly graphitic carbon, as a durable alternative support material for Pt nanoparticles for oxygen reduction in fuel cells. Pt nanoparticles are deposited on poly(diallyldimethylammonium chloride)(PDDA)-coated GNP, and characterized with transmission electron microscopy, X-ray diffraction, Raman spectra, and electrochemical tests. Pt/GNP exhibits greatly enhanced electrochemical durability (2-3 times that of Pt/CNT and commercial Etek Pt/C). These are attributed to the intrinsic high graphitization degree of GNP and the enhanced Pt-carbon interaction in Pt/GNP. If considering that GNP can be easily mass produced from graphite, GNP is a promising, low-cost, and durable electrocatalyst support for oxygen reduction in fuel cells.

carbon nanotubes↗

Performance of solid oxide fuel cells operated with coal syngas provided directly from a gasification process

Solid oxide fuel cells (SOFCs) are presently being developed for gasification integrated power plants that generate electricity from coal at 50+% efficiency. The interaction of trace metals in coal syngas with the Ni-based SOFC anodes is being investigated through thermodynamic analyses and in laboratory experiments, but direct test data from coal syngas exposure are sparsely available. This research effort evaluates the significance of SOFC performance losses associated with exposure of a SOFC anode to direct coal syngas. SOFC specimen of industrially relevant composition are operated in a unique mobile test skid that was deployed to the research gasifier at the National Carbon Capture Center (NCCC) in Wilsonville, AL. The mobile test skid interfaces with a gasifier slipstream to deliver hot syngas (up to 300°C) directly to a parallel array of 12 button cell specimen, each of which possesses an active area of approximately 2 cm2. During the 500 hour test period, all twelve cells were monitored for performance at four discrete operating current densities, and all cells maintained contact with a data acquisition system. Of these twelve, nine demonstrated good performance throughout the test, while three of the cells were partially compromised. Degradation associated with the properly functioning cells was attributed to syngas exposure and trace material attack on the anode structure that was accelerated at increasing current densities. Cells that were operated at 0 and 125 mA/cm² degraded at 9.1 and 10.7% per 1000 hours, respectively, while cells operated at 250 and 375 mA/cm² degraded at 18.9 and 16.2% per 1000 hours, respectively. Post-trial spectroscopic analysis of the anodes showed carbon, sulfur, and phosphorus deposits; no secondary Ni-metal phases were found.

Environmental Molecular Sciences Laboratory↗

A combined theoretical-experimental study of interactions between vanadium ions and Nafion membrane in all-vanadium redox flow batteries

Vanadium redox flow batteries (VRFBs) are a promising solution for large-scale energy storage, but a number of problems still impede the deployment of long-lifetime VRFBs. One important aspect of efficient operation of VRFBs is understanding interactions between vanadium species and the membrane. Herein, we investigate the interactions between all four vanadium cations and Nafion membrane by a combination of infrared (IR) spectroscopy and density-functional-theory (DFT)-based static and molecular dynamics simulations. It is observed that vanadium species primarily lead to changes in the IR spectrum of Nafion in the SO 3 - spectral region which is attributed to the interaction between vanadium species and the SO 3 - exchange sites. DFT calculations of vanadium - Nafion complexes in the gas phase show that it is thermodynamically favorable for all vanadium cations to bind to SO 3 - via a contact pair mechanism. Car-Parrinello molecular dynamics-based metadynamics simulations of cation-Nafion systems in aqueous solution suggest that and species coordinate spontaneously to SO 3 - , which is not the case for VO 2+ and VO 2 + . The interaction behavior of the uncycled membrane determined in this study is used to explain the experimentally observed changes in the vibrational spectra, and is discussed in light of previous results on device-cycled membranes.

00-01↗

Electrochemical and Interfacial Behavior of All Solid State Batteries Using Li10SnP2S12 Solid Electrolyte

Thio-Lithium Superionic Conductor (Thio-LISICON) Li10GeP2S12 equivalent Li10SnP2S12 (LSPS) is comparable in ionic conductivity yet with a lower cost as an electrolyte for all solid-state batteries (ASSBs). ASSBs with LSPS solid electrolyte (SE), lithium-indium alloy anode, and LiCoO2 (LCO) cathode were successfully fabricated and their electrochemical performance at 60 °C was examined. Atomic layer deposition of Li3NbO4 on LCO was conducted to improve the interfacial stability. The Li3NbO4 coating significantly improves the cycle stability of the ASSB, which retains about 85% of the initial capacity after 70 cycles at a current density of 0.13 mA/cm2, while the ASSB with uncoated LCO retains ~ 60% of the initial capacity after 70 cycles. Electrochemical impedance spectroscopy tests indicate a rapid growth of charge transfer resistance upon cycling for the cell with the uncoated LCO, primarily due to the surface instability and build-up of a space charge layer between LSPS and LCO. However, the ASSBs with Li3NbO4 coated LCO show a more stable interface with a negligible impedance increase upon cycling, attributable to the buffering and passivating roles of the Li3NbO4 coating. The interfacial microstructure was analyzed to elucidate at the underlying reasons for the impedance increase and the pivotal role of the Li3NbO4 coating. Our study indicates that the surface coating significantly improves the cycle stability of the ASSBs with LSPS as the electrolyte, mostly due to an improvement of the charge transfer mechanism. The coating reduced the interphase thickness and the interfacial resistance to about a third of the uncoated one after 10 cycles.

Vinado, Carolina↗

Calorimetry can detect the early onset of hydrolysis in hybrid supercapacitors with aqueous electrolytes

This study investigates the effect of cation species on the onset of electrolyte hydrolysis in hybrid supercapacitors with aqueous electrolytes using isothermal operando calorimetry. The cells consisted of a positive α-MnO 2 cryptomelane electrode and a negative activated carbon (AC) electrode with either 0.5 M K 2 SO 4 or 0.5 M Cs 2 SO 4 aqueous electrolytes. They were characterized using cyclic voltammetry and galvanostatic cycling. In addition, the instantaneous heat generation rate at each electrode was measured using a custom isothermal operando calorimeter. Heat generation associated with resistive losses (Joule heating) and reversible ion adsorption/desorption was clearly identified. For larger potential windows, an endothermic dip, attributed to the onset of hydrolysis, was observed at the positive α-MnO 2 electrode where K + and Cs + ions engaged in fast surface redox reactions. Interestingly, this endothermic dip appeared at 1.8 V and 2.0 V for K 2 SO 4 and Cs 2 SO 4 aqueous electrolytes, respectively. The difference in the stable operating potential window was attributed to thinner solvation shell around Cs + cation than for K + thus reducing the amount of water present near the electrodes as ions partially shed their solvation shells during adsorption. The early onset of hydrolysis could be observed by isothermal operando calorimetry before it could be observed with conventional electrochemical methods.

42 ENGINEERING↗

Shape controlled synthesis of CaMoO{sub 4} thin films and their photoluminescence property

CaMoO{sub 4} (CMO) disordered and ordered thin films were prepared by the complex polymerization method (CPM). The films were annealed at different temperatures and time in a conventional resistive furnace (RF) and in a microwave (MW) oven. The microstructure and surface morphology of the structure were monitored by atomic force microscopy (AFM) and high-resolution scanning electron microscopy (HRSEM). Order and disorder were characterized by X-ray diffraction (XRD) and optical reflectance. A strong photoluminescence (PL) emission was observed in the disordered thin films and was attributed to complex cluster vacancies. The experimental results were compared with density functional and Hartree-Fock calculations. - Graphical abstract: CaMoO{sub 4} thin films were prepared by the complex polymerization method (CPM). The films were annealed at different temperatures and time in a conventional resistive furnace and in a microwave oven. A strong photoluminescence emission was observed in the disordered thin films and was attributed to complex cluster vacancies. The experimental results were confirmed by high level first principle calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The higher excited electronic states and spin-orbit splitting of the valence band in three-dimensional assemblies of close-packed ZnSe and CdSe quantum dots in thin film form

Optical properties of as-deposited and annealed thin films composed of three-dimensional arrays of sphalerite-type ZnSe and CdSe quantum dots (QDs), synthesized by chemical deposition, were investigated. Neglecting the S-D mixing of hole states, the lowest 'band to band' transitions in very small nanoclusters and in bulk-like clusters may be assigned as 1S{yields}1S and 1S{sub {delta}}{yields}1S, and are split by spin-orbit (SO) splitting energy of the bulk material-{delta}. The splitting energy between these transitions was found to be insensitive to QD size variations, which could be explained assuming that 1S hole states arising from valence band {gamma}{sub 7} and {gamma}{sub 8} components do not mix with higher angular momentum states and shift together to higher energies coupled via the isotropic hole mass. This implies significant difference between the SO splitting energies in the two semiconductors. Accounting for S-D mixing of hole states, the observed transitions may be attributed to the fundamental ground state-(1S{sub 3/2}, 1S{sub e}) and the ground state-(1S{sub 1/2}, 1S{sub e}) ones. The observed 'splittings' thus do not correspond exactly to SO splitting energy in both semiconductors, but are complex functions of it, as exact position of each hole energy level depends, besides on {delta}, also on other material-characteristic parameters. - Graphical abstract: Accounting for S-D mixing of hole states, the observed optical transitions in very small sphalerite-type ZnSe and CdSe nanoclusters are attributed to the ground state-(1S{sub 3/2}, 1S{sub e}) and the ground state-(1S{sub 1/2}, 1S{sub e}). The 'splittings' do not correspond to SO splitting energy, but are complex functions of it.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Al{sub 2}O{sub 3} - TiO{sub 2}-A simple sol-gel strategy to the synthesis of low temperature sintered alumina-aluminium titanate composites through a core-shell approach

A simple sol-gel based core-shell approach for the synthesis of alumina-aluminium titanate composite is reported. Alumina is the core and titania is the shell. The coating of titania has been performed in aqueous medium on alumina particle by means of heterocoagulation of titanyl chloride. Further heat treatment results in low temperature formation of aluminium titanate as well as low temperature sintering of alumina-aluminium titanate composites. The lowering of the reaction temperature can be attributed to the maximisation of the contact surface between the reactants due to the core-shell approach involving nanoparticles. The mechanism of formation of aluminium titanate and the observations on densification features in the present process are compared with that of mixture of oxides under identical conditions. The sintered alumina-aluminium titanate composite has an average grain size of 2 {mu}m. - Graphical abstract: The article presents a simple sol-gel process through core-shell approach to the synthesis of low temperature sintered alumina-aluminium titanate. The lowering of the reaction temperature can be attributed to the maximisation of the contact surface between the reactant due to the core-shell approach. This material showed the better microstructure control compared to the standard solid-state mixing route.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation and photocatalytic activity of high-efficiency visible-light-responsive photocatalyst SnS{sub x}/TiO{sub 2}

Visible-light-responsive composite photocatalysts SnS{sub 2}/TiO{sub 2} and SnS/TiO{sub 2} with different mass ratios were prepared by in-situ synthesis technology in solution with commercial TiO{sub 2}. The junction-based materials SnS{sub x} (x=1, 2)/TiO{sub 2} were found to have high visible-light photocatalytic performance and possess much better activity than the single-phase SnS{sub x} or TiO{sub 2}. The greatly enhanced photocatalytic activity of the SnS{sub x}/TiO{sub 2} composites was mainly attributed to the matching band potentials and efficient charge transfer and separation at the tight-bonding interface between SnS{sub x} and TiO{sub 2}. The fact was confirmed by the comparison of photocatalytic activities of the SnS{sub 2}/TiO{sub 2} samples prepared by physical mixing method and in-situ synthesis technique. - Graphical Abstract: Visible-light-responsive composite photocatalysts SnS{sub 2}/TiO{sub 2} and SnS/TiO{sub 2} with different mass ratios were prepared by in-situ synthesis technology in solution with commercial TiO{sub 2}. The photocatalysts SnS{sub x} (x=1, 2) and SnS{sub x}/TiO{sub 2} possess excellent photocatalytic activities. The greatly enhanced photocatalytic activity of the SnS{sub x}/TiO{sub 2} composites was mainly attributed to the matching band potentials and efficient charge transfer and separation at the tight-bonding interface between SnS{sub x} and TiO{sub 2}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Epitaxial growth of high purity cubic InN films on MgO substrates using HfN buffer layers by pulsed laser deposition

Cubic InN films have been grown on MgO substrates with HfN buffer layers by pulsed laser deposition (PLD). It has been found that the use of HfN (100) buffer layers allows us to grow cubic InN (100) films with an in-plane epitaxial relationship of [001]{sub InN}//[001]{sub HfN}//[001]{sub MgO}. X-ray diffraction and electron back-scattered diffraction measurements have revealed that the phase purity of the cubic InN films was as high as 99%, which can be attributed to the use of HfN buffer layers and the enhanced surface migration of the film precursors by the use of PLD. - Graphical abstract: Cubic InN films have been grown on MgO substrates with HfN buffer layers by pulsed laser deposition (PLD). It has been revealed that the phase purity of the cubic InN films was as high as 99 %, which can be attributed to the use of HfN buffer layers and the enhanced surface migration of the film precursors by the use of PLD.

36 MATERIALS SCIENCE↗

Luminescent lanthanide complexes with 4-acetamidobenzoate: Synthesis, supramolecular assembly via hydrogen bonds, crystal structures and photoluminescence

Four new luminescent complexes, namely, [Eu(aba){sub 2}(NO{sub 3})(C{sub 2}H{sub 5}OH){sub 2}] (1), [Eu(aba){sub 3}(H{sub 2}O){sub 2}].0.5 (4, 4'-bpy).2H{sub 2}O (2), [Eu{sub 2}(aba){sub 4}(2, 2'-bpy){sub 2}(NO{sub 3}){sub 2}].4H{sub 2}O (3) and [Tb{sub 2}(aba){sub 4}(phen){sub 2}(NO{sub 3}){sub 2}].2C{sub 2}H{sub 5}OH (4) were obtained by treating Ln(NO{sub 3}){sub 3}.6H{sub 2}O and 4-acetamidobenzoic acid (Haba) with different coligands (4, 4'-bpy=4, 4'-bipyridine, 2, 2'-bpy=2, 2'-bipyridine, and phen=1, 10-phenanthroline). They exhibit 1D chains (1-2) and dimeric structures (3-4), respectively. This structural variation is mainly attributed to the change of coligands and various coordination modes of aba molecules. Moreover, the coordination units are further connected via hydrogen bonds to form 2D even 3D supramolecular networks. These complexes show characteristic emissions in the visible region at room temperature. In addition, thermal behaviors of four complexes have been investigated under air atmosphere. The relationship between the structures and physical properties has been discussed. - Graphical abstract: Structure variation of four complexes is attributed to the change of coligands and various coordination modes of aba molecules. Moreover, they show characteristic emissions in the visible region. Highlights: > Auxiliary ligands have played the crucial roles on the structures of the resulting complexes. > Isolated structure units are further assembled via H-bonds to form supramolecular networks. > These solid-state complexes exhibit strong, characteristic emissions in the visible region.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The system Ce-Zn-B at 800 deg. C

The isothermal section for the system Ce-Zn-B has been established at 800 deg. C using electron microprobe analysis and X-ray powder diffraction. No ternary compounds exist and mutual solid solubilities of binary phases are negligible. In the concentration range of 10.0-10.5 at% Ce two structural modifications have been confirmed: high temperature {beta}Ce{sub 2}Zn{sub 17} above {approx}750 deg. C with the Th{sub 2}Zn{sub 17} type (R3-bar m, a=0.90916(4) nm, c=1.3286(1) nm) and low temperature {alpha}CeZn{sub 7} (Ce{sub 1-x}Zn{sub 5+2x}; x{approx}0.33) up to 750 deg. C for which we attributed the TbCu{sub 7} type (P6/mmm, a=0.52424(2), c=0.44274(1) nm). The crystal structure of CeZn{sub 7} was derived from the Rietveld refinement of X-ray powder intensities. Precise data on atom site distribution and positional parameters have been furthermore provided from X-ray single crystal refinements for two compounds, for which crystal structures hitherto have only been derived from X-ray diffraction photographs: Ce{sub 3}Zn{sub 11} (Immm, a=0.45242(2) nm, b=0.88942(3) nm, c=1.34754(4) nm) and Ce{sub 3}Zn{sub 22} (I4{sub 1}/amd; a=0.89363(2) nm, c=2.1804(5) nm). - Graphical abstract: Existence of low temperature modification {alpha}CeZn{sub 7} (Ce{sub 1-x}Zn{sub 5+2x}; x{approx}0.33) of Ce{sub 2}Zn{sub 17} has been verified up to 750 deg. C that is attributed with the TbCu{sub 7} type. Highlights: > Isothermal section of system Ce-Zn-B at 800 deg. C. > In System Ce-Zn, X-ray single crystal intensity data refinement of Ce{sub 3}Zn{sub 11} and Ce{sub 3}Zn{sub 22} and Rietveld refinement of Ce{sub 13}Zn{sub 58}. > Two temperature modifications of Ce{sub 2}Zn{sub 17}, rhombohedral {beta}Ce{sub 2}Zn{sub 17} (hT) and of hexagonal {alpha}CeZn{sub 7} (lT). > No ternary compound in the System Ce-Zn-B (<50 at% Ce) at 800 deg. C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Centrosymmetric [N(CH{sub 3}){sub 4}]{sub 2}TiF{sub 6} vs. noncentrosymmetric polar [C(NH{sub 2}){sub 3}]{sub 2}TiF{sub 6}: A hydrogen-bonding effect on the out-of-center distortion of TiF{sub 6} octahedra

The syntheses, structures, and characterization of organically templated zero-dimensional titanium fluoride materials, A{sub 2}TiF{sub 6} (A=[N(CH{sub 3}){sub 4}] or [C(NH{sub 2}){sub 3}]), are reported. Phase pure samples of A{sub 2}TiF{sub 6} were synthesized by either solvothermal reaction method or a simple mixing method. While [N(CH{sub 3}){sub 4}]{sub 2}TiF{sub 6} crystallizes in a centrosymmetric space group, R-3, [C(NH{sub 2}){sub 3}]{sub 2}TiF{sub 6} crystallizes in a noncentrosymmetric polar space group, Cm. The asymmetric out-of-center distortion of TiF{sub 6} octahedra in polar [C(NH{sub 2}){sub 3}]{sub 2}TiF{sub 6} are attributable to the hydrogen-bonding interactions between the fluorine atoms in TiF{sub 6} octahedra and the nitrogen atoms in the [C(NH{sub 2}){sub 3}]{sup +} cation. Powder second-harmonic generation (SHG) measurements on the [C(NH{sub 2}){sub 3}]{sub 2}TiF{sub 6}, using 1064 nm radiation, indicate the material has SHG efficiency of 25 Multiplication-Sign that of {alpha}-SiO{sub 2}, which indicates an average nonlinear optical susceptibility, Left-Pointing-Angle-Bracket d{sub eff} Right-Pointing-Angle-Bracket {sub exp} of 2.8 pm/V. Additional SHG measurements reveal that the material is not phase-matchable (Type 1). The magnitudes of out-of-center distortions and dipole moment calculations for TiF{sub 6} octahedra will be also reported. - Graphical abstract: The out-of-center distortion of TiF{sub 6} octahedron in the polar noncentrosymmetric [C(NH{sub 2}){sub 3}]{sub 2}TiF{sub 6} is attributable to the hydrogen-bonding interactions between the F in TiF{sub 6} octahedron and the H-N in the [C(NH{sub 2}){sub 3}]{sup +}. Highlights: Black-Right-Pointing-Pointer Two titanium fluorides materials have been synthesized in high yields. Black-Right-Pointing-Pointer Hydrogen-bonds are crucial for the out-of-center distortion of TiF{sub 6} octahedra. Black-Right-Pointing-Pointer [C(NH{sub 2}){sub 3}]{sub 2}TiF{sub 6} has a SHG efficiency of 25 Multiplication-Sign that of {alpha}-SiO{sub 2}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mo{sub x}Cu{sub 1-x}Sr{sub 2}YCu{sub 2}O{sub y} (0.3{<=}x{<=}1) revisited: Superconductivity, magnetism and the molybdenum oxidation state

A systematic study is reported on the range of stability of molybdenum substituted Sr-based 123 compounds with Mo-Sr-Y-Cu system, synthesized under ambient pressure. All materials crystallize in the space group: P4/mmm and the observed solubility limit of Mo is rather low in this structure because secondary phases start to form as soon as x>0.3 in nominal composition is reached. The antiferromagnetic property in all superconducting multiphase samples can be attributed to the secondary phase Y{sub 2}Cu{sub 2}O{sub 5}. The influence of oxygen annealing on the changes in electronic structure for the pure Mo{sub 0.3}Cu{sub 0.7}Sr{sub 2}YCu{sub 2}O{sub y} system associated with a non-superconductor to superconductor transition has been investigated by means of X-ray photoelectron spectroscopy, powder X-ray diffraction, magnetic susceptibility and specific-heat measurements. We unambiguously show the predominance of the Mo{sup 5+} state over the Mo{sup 6+} one on both as-synthesized and annealed phases; annealing under an oxygen atmosphere enhances both the Mo{sup 6+} and Cu{sup 2+} amounts. We suggest that the enhancement of Mo{sup 6+} under oxygen annealing is in close relation with the decrease in the O 2p{yields}Cu 3d charge-transfer energy resulting in superconducting properties. - Graphical abstract: A study on the ambient-pressure synthesis and the range of stability of complex perovskites in the system Y-Sr-Cu-Mo shows that the solubility limit of Mo is rather low in this structure ({approx}30%). Secondary phases (detected by XRD) start to form for x>0.3 in nominal composition. All materials crystallize in the space group: P4/mmm. Antiferromagnetism in all superconducting multiphase samples is attributed to the secondary phase Y{sub 2}Cu{sub 2}O{sub 5}. Pure Mo{sub 0.3}Cu{sub 0.7}Sr{sub 2}YCu{sub 2}O{sub y} studied by means of powder X-ray diffraction, magnetic susceptibility and specific-heat measurements. Changes in electronic structure for the pure Mo{sub 0.3}Cu{sub 0.7}Sr{sub 2}YCu{sub 2}O{sub y} system associated with a non-superconductor to superconductor transition have been investigated by means of X-ray photoelectron spectroscopy (XPS). Highlights: Black-Right-Pointing-Pointer Solubility limit of Mo is rather low in Mo{sub x}Cu{sub 1-x}Sr{sub 2}YCu{sub 2}O{sub y} (x{approx}0.3). Black-Right-Pointing-Pointer Antiferromagnetism and superconductivity do not coexist. Black-Right-Pointing-Pointer Pure Mo{sub 0.3}Cu{sub 0.7}Sr{sub 2}YCu{sub 2}O{sub y} (T{sub c} Almost-Equal-To 30 K) prepared and characterized. Black-Right-Pointing-Pointer XPS shows that Mo{sup 5+} predominates over Mo{sup 6+}. Black-Right-Pointing-Pointer Annealing under O{sub 2} enhances Mo{sup 6+} and Cu{sup 2+} states.

36 MATERIALS SCIENCE↗