SEARCH · Engineering Papers

Results for “Antennas”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

All sources NASA NTRS DOE OSTI

NASA NTRS1977

An analysis of the Wheeler method for measuring the radiating efficiency of antennas

A model problem is formulated to evaluate the limitations imposed by the assumptions in the Wheeler or cap method for measuring the radiating efficiency of antennas. The antenna in the model is a circular loop and the radiation shield is a spherical metal shell. Calculated values of the actual efficiency of the antenna and the efficiency that would be measured using the Wheeler method are compared to determine the accuracy of the method and set guidelines for its application.

Smith, G. S.↗

NASA NTRS1977

Shuttle Experimental Radar for Geological Exploration (SERGE); antenna and integration concept definition study

The baseline configuration defined has the SERGE antenna panel array mounted on the OFT-2 pallet sufficiently high in the bay that negligible amounts of radiation from the beam are reflected from orbiter surfaces into the shuttle payload bay. The array is symmetrically mounted to the pallet along the array long dimension with the pallet at the center. It utilizes a graphite epoxy trusswork support structure. The antenna panels are of SEASAT engineering model design and construction. The antenna array has 7 panels and a 7-way naturally tapered coax corporate feed system. The performance of the system is predicted to exceed 33 db gain, have -15 db sidelobes in the E-plane and even lower in the H-plane, and have and E-plane beamwidth less than 2.2 deg, all within performance specification. The primary support structure is predicted to exceed the specified greater than 25 hertz fundamental frequency, although individual panels will have hertz fundamental frequency.

Kierein, J. W.↗

NASA NTRS1977

Ku-band antenna acquisition and tracking performance study, volume 4

The results pertaining to the tradeoff analysis and performance of the Ku-band shuttle antenna pointing and signal acquisition system are presented. The square, hexagonal and spiral antenna trajectories were investigated assuming the TDRS postulated uncertainty region and a flexible statistical model for the location of the TDRS within the uncertainty volume. The scanning trajectories, shuttle/TDRS signal parameters and dynamics, and three signal acquisition algorithms were integrated into a hardware simulation. The hardware simulation is quite flexible in that it allows for the evaluation of signal acquisition performance for an arbitrary (programmable) antenna pattern, a large range of C/N sub O's, various TDRS/shuttle a priori uncertainty distributions, and three distinct signal search algorithms.

Huang, T. C.↗

NASA NTRS1977

DSS 13 automated antenna pointing subsystem phase 1 hardware

An automated antenna pointing subsystem (APS) is being installed at DSS 13 as part of the unattended station project. The function of the APS is to track an instructed position with the 26 meter antenna and to monitor the antenna servo system and meteorological conditions to ensure a proper operational environment. This article discusses the now-completed first phase of the digital hardware portion of the APS development.

Sievers, M. W.↗

NASA NTRS1978

Thin conformal antenna array for microwave power conversions

A structure of a circularly polarized, thin conformal, antenna array which may be mounted integrally with the skin of an aircraft employs microstrip elliptical elements and interconnecting feed lines spaced from a circuit ground plane by a thin dielectric layer. The feed lines are impedance matched to the elliptical antenna elements by selecting a proper feedpoint inside the periphery of the elliptical antenna elements. Diodes connected between the feed lines and the ground plane rectify the microwave power, and microstrip filters (low pass) connected in series with the feed lines provide dc current to a microstrip bus. Low impedance matching strips are included between the elliptical elements and the rectifying and filtering elements.

Dickinson, R. M.↗

NASA NTRS1978

SAR antenna calibration techniques

Calibration of SAR antennas requires a measurement of gain, elevation and azimuth pattern shape, boresight error, cross-polarization levels, and phase vs. angle and frequency. For spaceborne SAR antennas of SEASAT size operating at C-band or higher, some of these measurements can become extremely difficult using conventional far-field antenna test ranges. Near-field scanning techniques offer an alternative approach and for C-band or X-band SARs, give much improved accuracy and precision as compared to that obtainable with a far-field approach.

Carver, K. R.↗

NASA NTRS1978

Mathematical modeling and simulation of the space shuttle imaging radar antennas

Simulations of space shuttle synthetic aperture radar antennas under the influence of space environmental conditions were carried out at L, C, and X-band. Mathematical difficulties in modeling large, non-planar array antennas are discussed, and an approximate modeling technique is presented. Results for several antenna error conditions are illustrated in far-field profile patterns, earth surface footprint contours, and summary graphs.

Campbell, R. W.↗

NASA NTRS1977

An analysis technique for microstrip antennas

The paper presents a combined numerical and empirical approach to the analysis of microstrip antennas over a wide range of frequencies. The method involves representing the antenna by a fine wire grid immersed in a dielectric medium and then using Richmond's reaction formulation (1974) to evaluate the piecewise sinusoidal currents on the grid segments. The calculated results are then modified to account for the finite dielectric discontinuity. The method is applied to round and square microstrip antennas.

Agrawal, P. K.↗

NASA NTRS1978

A hybrid technique for wire antennas in a cavity

An evaluation is conducted of two numerical techniques developed by Richmond (1961, 1966) for wire antennas and scattering bodies. It is concluded that a more efficient and accurate scheme can be devised by suitably combining the two techniques. This scheme, which is called the 'hybrid method', is well suited for a wire antenna mounted in a cavity. Reaction matching is employed in the case of the antenna, while point matching is used for the support structure. The described approach makes it possible to consider voltage generators without the use of any equivalent magnetic frill current sources. The number of unknown currents to be determined is essentially optimized by this combination of reaction matching and point matching. The resulting current distribution is a quantized distribution on the support structure and is continuous on the main radiator.

Agrawal, P. K.↗

NASA NTRS1978

The beamed power microwave transmitting antenna

Beamed power refers to radiation techniques employing directional antennas for purposes of transferring energy in microwave form from one place to another. The peaceful uses of beamed power as applied to electric utilities functions and transportation concepts are considered. An investigation is conducted regarding the design approaches and techniques which can be used by the microwave component engineer to render beamed power systems potentially safe for humans and other biota. High-power microwave transmission antennas are proposed for beaming power from earth-orbiting satellites to receiving antennas (rectennas) on earth. Other applications include beaming power to run helicopters, aircraft, and aerostats equipped with rectennas. System designs must provide for techniques to yield microwave radiation levels that do not exceed allowable limits. Attention is given to beam surveillance techniques and the effects of an implementation of these techniques on the beamed power systems.

Dickinson, R. M.↗

NASA NTRS1978

Strip antennas in a dielectric slab

A method is proposed to analyze electrically thin strip antennas in an electrically thin dielectric slab. The method combines a moment method solution and a modification of the piecewise sinusoidal reaction formulation for thin wire radiators in a homogeneous medium. Strip antennas in both homogeneous and inhomogeneous media are considered. The analysis has the advantages that it is applicable to a wide variety of antenna geometries, that the slab may be of finite or infinite extent, and that the presence of the slab introduces no new unknowns in the moment method solution. Numerical calculations and verification by measurements are presented for the impedance of a strip dipole in a dielectric slab.

Newman, E. H.↗

NASA NTRS1980

Low-profile communications antenna

Low profile antenna constructed using microstrip techniques are used for elliptical or circularly polarized signals. Operating range is determined by thickness of dielectric layer and size of antenna element. Compact size and shape along with other desirable features may make antenna useful for communication on trains and other road vehicles.

Yu, I. P.↗

NASA NTRS1978

Phased array antenna control

Several new and useful improvements in steering and control of phased array antennas having a small number of elements, typically on the order of 5 to 17 elements are provided. Among the improvements are increasing the number of beam steering positions, reducing the possibility of phase transients in signals received or transmitted with the antennas, and increasing control and testing capacity with respect to the antennas.

Doland, G. D.↗

NASA NTRS1979

An 11-meter deployable truss for the SEASAT radar antenna

A folding three dimensional truss and tripod assembly which deploys the SEASAT Synthetic Aperture Radar Antenna is described. The folding structure with the antenna panels and rf components stows in an 8.5-inch-thick package. Upon deployment, the structure produced is a flat and rigid support for the antenna.

Campbell, B. E.↗

NASA NTRS1979

Reliability breakthrough: An antenna deployment/positioning mechanism with electrical and mechanical redundancy

An Antenna Positioner Mechanism (APM) was developed for deployment of an antenna reflector and for fine granularity closed loop tracking of the antenna in response to RF beacon error signals. By utilizing permanent magnet stepper motors, spur gearheads, irreversible single threat worm/wheel assemblies and a miter gear differential, full electrical and mechanical redundancy was realized. Two versions of this design were generated: one is a weight-optimized design with a clutch for overload protection and one is a more rugged unit without a clutch.

Olson, M. C.↗

NASA NTRS1978

Microwave delay characteristics of Cassegrainian antennas

A technique is presented in which the time an RF signal is delayed in propagating through a Cassegrain antenna is determined. The technique utilizes the group delay time and the envelope delay time as found from the antenna transfer function. The calculations show that a focused antenna is basically a nondispersive device whose delay time may be found from an optics formula. Small subreflector displacements result in significant delay changes requiring calibrations for many applications.

Cha, A. G.↗

NASA NTRS1980

Multiband microstrip antenna

Compact antenna transmits and receives elliptically and circularly polarized radiation. Antenna consists of layers of elliptical disks separated by dielectric substrates. Each disk operates at frequency determined by its size and dielectric constant of substrate. Individual frequency bands can be made to overlap, to yield single broadband antenna. Standard microstrip techniques are used to build it.

Yu, I.↗

NASA NTRS1979

Experimental loop antennas for 60 KHz to 200 KHz

The design and design data for broadband loop antenna systems are presented. An investigation of some simple systems for possible Loran C receivers which require a bandwidth of greater than 20 KHz is discussed. Designs are presented for a 60 KHz WWVB antenna, several Loran C variations, and some 1750 meter band antennas. Signals received on all these, including one airborne experiment where a Loran C receiver gave the correct time difference reading within 1 microsecond while flying on a straightline course are examined. The phase reversal in the Loran C when the direction of travel changes 180 degrees is discussed and possible corrections are studied.

Burhans, R. W.↗