Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Analytical Method Development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

A convergence study for SPDEs using combined Polynomial Chaos and Dynamically-Orthogonal schemes

We study the convergence properties of the recently developed Dynamically Orthogonal (DO) field equations [1] in comparison with the Polynomial Chaos (PC) method. To this end, we consider a series of one-dimensional prototype SPDEs, whose solution can be expressed analytically, and which are associated with both linear (advection equation) and nonlinear (Burgers equation) problems with excitations that lead to unimodal and strongly bi-modal distributions. We also propose a hybrid approach to tackle the singular limit of the DO equations for the case of deterministic initial conditions. The results reveal that the DO method converges exponentially fast with respect to the number of modes (for the problems considered) giving same levels of computational accuracy comparable with the PC method but (in many cases) with substantially smaller computational cost compared to stochastic collocation, especially when the involved parametric space is high-dimensional.

97 MATHEMATICS AND COMPUTING↗

Norms, Standards, and Legislation for Fast Pyrolysis Bio-oils from Lignocellulosic Biomass

Fast pyrolysis of woody biomass is close to full maturity, with first-of-its-kind commercial size installations for fuel production being commissioned in Finland (Fortum) and in The Netherlands (Empyro), and in the design phase in Brazil (Ensyn). In the industrial-scale combustion tests, the use of fast pyrolysis bio-oil (FPBO) has been demonstrated to be a viable option to replace heavy fuel oil in district heating applications. Commercially usable district heating boilers and burners suitable for FPBO are available. There is research on diesel-engine and gas-turbine applications but, so far, no proven demonstrations. FPBO is completely different from mineral oils; hence, standards are needed. Analytical methods have been systematically validated and modifications to the standards as well as completely new methods have been made. Two ASTM burner fuel standards already exist and European boiler fuel grades are being developed under CEN. The focus on CEN standardization is on boiler use, because of its commercial readiness.

bio-oil↗

General, Rigorous Approach for the Treatment of Interfragment Covalent Bonds

Here, a generalized, projection-based transformation of the method-agnostic Fock operator in various ab initio fragment-based quantum chemistry methods has been developed for the treatment of interfragment covalent bonds. This transformation freezes the relevant localized molecular orbital associated with each interfragment bond, thereby restricting the variational subspace of the fragment wave functions, in order to maintain the proper physical characteristics of the involved covalent bonds. In addition, sets of orbitals that would lead to multiple occupancy of certain orbitals are explicitly removed from the variational space. The transformation is developed for the specific case of mutually orthonormal frozen and unfrozen orbitals within each fragment. The newly developed approach is then used to study model systems with two popular ab initio fragment-based methods, and the results of these calculations are compared to those obtained by existing methodologies. Analysis is focused on both quantitative and qualitative accuracy as well as computational scalability and stability. Other methods for which the developed formalisms are appropriate are outlined, and future extensions of the methods are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formation mechanism of guided resonances and bound states in the continuum in photonic crystal slabs

We develop a formalism, based on the mode expansion method, to describe the guided resonances and bound states in the continuum (BICs) in photonic crystal slabs with one-dimensional periodicity. This approach provides analytic insights to the formation mechanisms of these states: the guided resonances arise from the transverse Fabry–Pérot condition, and the divergence of the resonance lifetimes at the BICs is explained by a destructive interference of radiation from different propagating components inside the slab. As a result, we show BICs at the center and on the edge of the Brillouin zone protected by symmetry, BICs at generic wave vectors not protected by symmetry, and the annihilation of BICs at low-symmetry wave vectors.

36 MATERIALS SCIENCE↗

Accurate ab initio potential energy surface, thermochemistry, and dynamics of the F{sup −} + CH{sub 3}F S{sub N}2 and proton-abstraction reactions

We develop a full-dimensional global analytical potential energy surface (PES) for the F{sup −} + CH{sub 3}F reaction by fitting about 50 000 energy points obtained by an explicitly correlated composite method based on the second-order Møller–Plesset perturbation-F12 and coupled-cluster singles, doubles, and perturbative triples-F12a methods and the cc-pVnZ-F12 [n = D, T] basis sets. The PES accurately describes the (a) back-side attack Walden inversion mechanism involving the pre- and post-reaction (b) ion-dipole and (c) hydrogen-bonded complexes, the configuration-retaining (d) front-side attack and (e) double-inversion substitution pathways, as well as (f) the proton-abstraction channel. The benchmark quality relative energies of all the important stationary points are computed using the focal-point analysis (FPA) approach considering electron correlation up to coupled-cluster singles, doubles, triples, and perturbative quadruples method, extrapolation to the complete basis set limit, core-valence correlation, and scalar relativistic effects. The FPA classical(adiabatic) barrier heights of (a), (d), and (e) are −0.45(−0.61), 46.07(45.16), and 29.18(26.07) kcal mol{sup −1}, respectively, the dissociation energies of (b) and (c) are 13.81(13.56) and 13.73(13.52) kcal mol{sup −1}, respectively, and the endothermicity of (f) is 42.54(38.11) kcal mol{sup −1}. Quasiclassical trajectory computations of cross sections, scattering (θ) and initial attack (α) angle distributions, as well as translational and internal energy distributions are performed for the F{sup −} + CH{sub 3}F(v = 0) reaction using the new PES. Apart from low collision energies (E{sub coll}), the S{sub N}2 excitation function is nearly constant, the abstraction cross sections rapidly increase with E{sub coll} from a threshold of ∼40 kcal mol{sup −1}, and retention trajectories via double inversion are found above E{sub coll} = ∼ 30 kcal mol{sup −1}, and at E{sub coll} = ∼ 50 kcal mol{sup −1}, the front-side attack cross sections start to increase very rapidly. At low E{sub coll}, the indirect mechanism dominates (mainly isotropic backward-forward symmetric θ distribution and translationally cold products) and significant long-range orientation effects (isotropic α distribution) and barrier recrossings are found. At higher E{sub coll}, the S{sub N}2 reaction mainly proceeds with direct rebound mechanism (backward scattering and hot product translation)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Improved motional Stark effect signal processing using fast Fourier transform spectral analysis

A Fast Fourier Transform (FFT) based method has been developed, which improves the frequency response of the Motional Stark Effect (MSE) system by about a factor of 10 over the conventional analog lock-in method. The method uses fits to rigorously derived analytic expressions for the FFT spectral components of the MSE signal to accurately obtain the amplitudes and phases of the 2f1 and 2f2 photo-elastic modulator (PEM) frequencies that encode the polarization angle. Since no frequency filtering is used in the FFT method, the frequency response is limited by fundamental measurement properties: the frequency response of the detector, photon statistics, sample rate, and the ability to resolve the spectral components. In contrast, the frequency response of the analog lock-in is limited by a low pass filter with a cutoff of around 500 Hz. In the case of the DIII-D MSE system, the output of the photo-multiplier tube detector was sampled at 500 kHz and FFTs with as few as 100 points were used to obtain the amplitudes of the 2f1 and 2f2 PEM frequency components. This corresponds to a frequency response of 5 kHz, about ten times faster than the analog lock-in amplifier system. Details of the FFT method will be presented and compared to those of the analog lock-in system.

Makowski, M. A.↗

An enrichment wall modeling framework for spectral element methods

In the present work, a first-of-its-kind enrichment wall-model is developed within the spectral element method (SEM) framework for large-eddy simulations (LES) of wall-bounded turbulent flows. The method augments the polynomial solution in the wall-adjacent elements with an analytical law-of-the-wall enrichment function representing the mean velocity near the wall. In the solution representation, this enrichment function captures the large gradients in the boundary layer, which allows the polynomial modes to represent the turbulent fluctuations. The enriched solution is able to resolve the shear stress at the wall without any modification to the no-slip wall boundary conditions, which allows for greater accuracy in the near-wall region compared to traditional methods. The enrichment wall modeling approach is implemented in a high-order SEM computational fluid dynamics solver, Nek5000, and its performance is assessed in turbulent channel flow wall-modeled LES for a range of Reynolds numbers. It is demonstrated that the enrichment wall-model improves solution accuracy on under-resolved near-wall grids as compared to traditional shear stress wall-models.

42 ENGINEERING↗

A simple, flexible technique for RF cavity wake-field calculations

It is typical in the accelerator field to model machine components, especially RF cavities, as parallel RLC resonators. In the interest of simulating and diagnosing beam instabilities, knowledge of the time-domain voltage waveform over an equivalent resonator by a bunch current often proves useful. This waveform may be found by convolving the bunch current with the RLC resonator impulse response. While analytical and quasi-analytical expressions are available in this regime for common distributions such as the Gaussian, analogous results for less standard distributions are difficult to obtain using direct methods, which opens the door for the development of a more generalized technique. In this paper, a formulation is created that allows for the simple computation of the time-domain voltage waveform of and RLC resonator. The formulation uses the Cauchy Residue Theorem to extract the convolution result from the Fourier Domain, and it only requires that the current distribution Fourier Transform be holomorphic and known at one specific evaluation point. This greatly simplifies the computation of the time domain voltage for a large amount of bunch distributions both common and uncommon.

43 PARTICLE ACCELERATORS↗

Classical optimization with imaginary-time block encoding on quantum computers: The MaxCut problem

Optimization problems in finance, physics, and computer science are typically very hard to tackle in classical computing; quantum computing could help speed up computations and provide efficient methods for tackling large problems. Typically, to treat a problem with a quantum computer, the optimal solution is cast as the ground state of a diagonal Hamiltonian. Here, we develop a method, called imaginary-time evolution block encoding (ITE-BE), based on a recent imaginary-time algorithm, which requires no variational parameter optimization, as all parameters can be derived analytically from the target Hamiltonian. We also demonstrate that our method can be successfully combined with other quantum algorithms such as the quantum approximate optimization algorithm (QAOA). For illustration, here we study the MaxCut problem. We find that the QAOA ansatz increases the postselection success of ITE-BE, and shallow QAOA circuits, when boosted with ITE-BE, achieve better performance than deeper QAOA circuits. For the special case of the transverse initial state, we adapt our block-encoding scheme to allow for a deterministic application of the first layer of the circuit.

Zhong, Dawei [University of Southern California, L↗

Exact transient photon correlation with arbitrary laser pulses

We present a full quantum theory to study the transient evolution of photon pairs. We introduce a method which gives exact time-dependent solutions of the coupled quantum Langevin equations for a multilevel quantum particle driven by arbitrary time-dependent laser fields. The analytical solutions are used to develop a numerical code for computing exact time evolution of the two-photon correlation function. We analyze the effects of laser pulses sequence, pulse duration, chirping, and initial internal quantum states on the nonclassicality of the photon correlation through the violation of the Cauchy-Schwarz inequality. The results provide a promising possibility of controlling the generation of highly correlated photon pairs using tailored short laser pulses.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An improved physics-based approach for unfolding megavoltage bremsstrahlung spectra using transmission analysis

Purpose: To develop a physics-based approach to improve the accuracy and robustness of the ill-conditioned problem of unfolding megavoltage bremsstrahlung spectra from transmission data. Methods: Spectra are specified using a rigorously-benchmarked functional form. Since ion chambers are the typical detector used in transmission measurements, the energy response of a Farmer chamber is calculated using the EGSnrc Monte Carlo code, and the effect of approximating the energy response on the accuracy of the unfolded spectra is studied. A proposal is introduced to enhance spectral sensitivity by combining transmission data measured with multiple detectors of different energy response and by combining data from multiple attenuating materials. Monte Carlo methods are developed to correct for nonideal exponential attenuation (e.g., scatter effects and secondary attenuation). The performance of the proposed methods is evaluated for a diverse set of validated clinical spectra (3.5-25 MV) using analytical transmission data with simulated experimental noise. Results: The approximations commonly used in previous studies for the ion-chamber energy response lead to significant errors in the unfolded spectra. Of the configurations studied, the one with best spectral sensitivity is to measure four full transmission curves using separate low-Z and high-Z attenuators in conjunction with two detectors of different energy response (the authors propose a Farmer-type ion chamber, once with a low-Z, and once with a high-Z buildup cap material), then to feed the data simultaneously to the unfolding algorithm. Deviations from ideal exponential attenuation are as much as 1.5% for the smallest transmission signals, and the proposed methods properly correct for those deviations. The transmission data with enhanced spectral sensitivity, combined with the accurate and flexible spectral functional form, lead to robust unfolding without requiring a priori knowledge of the spectrum. Compared with the commonly-used methods, the accuracy is improved for the unfolded spectra and for the unfolded mean incident electron kinetic energy by at least factors of three and four, respectively. With simulated experimental noise and a lowest transmission of 1%, the unfolded energy fluence spectra agree with the original spectra with a normalized root-mean-square deviation, %{Delta}({psi}), of 2.3%. The unfolded mean incident electron kinetic energies agree, on average, with the original values within 1.4%. A lowest transmission of only 10% still allows unfolding with %{Delta}({psi}) of 3.3%. Conclusions: In the presence of realistic experimental noise, the proposed approach significantly improves the accuracy and robustness of the spectral unfolding problem for all therapy and MV imaging beams of clinical interest.

61 RADIATION PROTECTION AND DOSIMETRY↗

SU-C-BRC-04: Efficient Dose Calculation Algorithm for FFF IMRT with a Simplified Bivariate Gaussian Source Model

Purpose: To develop an efficient and accurate independent dose calculation algorithm with a simplified analytical source model for the quality assurance and safe delivery of Flattening Filter Free (FFF)-IMRT on an Elekta Versa HD. Methods: The source model consisted of a point source and a 2D bivariate Gaussian source, respectively modeling the primary photons and the combined effect of head scatter, monitor chamber backscatter and collimator exchange effect. The in-air fluence was firstly calculated by back-projecting the edges of beam defining devices onto the source plane and integrating the visible source distribution. The effect of the rounded MLC leaf end, tongue-and-groove and interleaf transmission was taken into account in the back-projection. The in-air fluence was then modified with a fourth degree polynomial modeling the cone-shaped dose distribution of FFF beams. Planar dose distribution was obtained by convolving the in-air fluence with a dose deposition kernel (DDK) consisting of the sum of three 2D Gaussian functions. The parameters of the source model and the DDK were commissioned using measured in-air output factors (Sc) and cross beam profiles, respectively. A novel method was used to eliminate the volume averaging effect of ion chambers in determining the DDK. Planar dose distributions of five head-and-neck FFF-IMRT plans were calculated and compared against measurements performed with a 2D diode array (MapCHECK™) to validate the accuracy of the algorithm. Results: The proposed source model predicted Sc for both 6MV and 10MV with an accuracy better than 0.1%. With a stringent gamma criterion (2%/2mm/local difference), the passing rate of the FFF-IMRT dose calculation was 97.2±2.6%. Conclusion: The removal of the flattening filter represents a simplification of the head structure which allows the use of a simpler source model for very accurate dose calculation. The proposed algorithm offers an effective way to ensure the safe delivery of FFF-IMRT.

60 APPLIED LIFE SCIENCES↗

Distributed heterogeneous compute infrastructure for the study of additive manufacturing systems

We present the current status of a large-scale computing framework to address the need of the multidisciplinary effort to study chemical dynamics. Specifically, we are enabling scientists to process and store experimental data, run large-scale computationally expensive high-fidelity physical simulation, and analyze these results using the state-of-the-art data analytics tools, machine learning, and uncertainty quantification methods using heterogeneous computing resources, such as CPU and GPU cluster. The framework can integrate or abstract out multiple domains based on roles. In order to develop this framework, we have leveraged an existing framework coupled with in-house heterogeneous computing resources. We present the results of using this framework on a single metadata triggered workflow to accelerate an additive manufacturing use case.

heterogeneous computing, hpc, workflows, reproduci↗

Fabrication of metal matrix composite by semi-solid powder processing

Various metal matrix composites (MMCs) are widely used in the automotive, aerospace and electrical industries due to their capability and flexibility in improving the mechanical, thermal and electrical properties of a component. However, current manufacturing technologies may suffer from insufficient process stability and reliability and inadequate economic efficiency and may not be able to satisfy the increasing demands placed on MMCs. Semi-solid powder processing (SPP), a technology that combines traditional powder metallurgy and semi-solid forming methods, has potential to produce MMCs with low cost and high efficiency. In this work, the analytical study and experimental investigation of SPP on the fabrication of MMCs were explored. An analytical model was developed to understand the deformation mechanism of the powder compact in the semi-solid state. The densification behavior of the Al6061 and SiC powder mixtures was investigated with different liquid fractions and SiC volume fractions. The limits of SPP were analyzed in terms of reinforcement phase loading and its impact on the composite microstructure. To explore adoption of new materials, carbon nanotube (CNT) was investigated as a reinforcing material in aluminum matrix using SPP. The process was successfully modeled for the mono-phase powder (Al6061) compaction and the density and density distribution were predicted. The deformation mechanism at low and high liquid fractions was discussed. In addition, the compaction behavior of the ceramic-metal powder mixture was understood, and the SiC loading limit was identified by parametric study. For the fabrication of CNT reinforced Al6061 composite, the mechanical alloying of Al6061-CNT powders was first investigated. A mathematical model was developed to predict the CNT length change during the mechanical alloying process. The effects of mechanical alloying time and processing temperature during SPP were studied on the mechanical, microstructural and compositional properties of the Al6061-CNT composites. A shear lag model was applied to predict the mechanical property (hardness) of the composite. This work demonstrated the promising potential of SPP in the fabrication of particle/fiber (nanotube) reinforced MMCs.

36 MATERIALS SCIENCE↗

Benchmark Solutions for Radiation Transport in Stochastic Media with Inhomogeneous Material Statistics

Accurately solving implicit Monte Carlo (IMC) thermal photon transport problems with mixed material cells is important in realistic applications. The production IMC package at LLNL treats mixed material cells arising from ALE remap and hydrodynamics using the same approximate model. The new Imp IMC thermal photon transport package currently under development has both a material interface reconstruction (MIR) algorithm and a Levermore-Pomraning (LP) stochastic medium algorithm for treating mixed material cells. Existing stochastic medium algorithms for treating mixed material cells in IMC lack a complete theoretical basis. The IMC LP algorithm implementation has been demonstrated to reproduce published deterministic LP solutions for the particular case of spatially homogeneous material statistics. Realistic simulations will include spatially inhomogeneous material statistics (material mean chord lengths). In a previous investigation, the LP-model for transport in binary stochastic media in rod geometry was generalized to accommodate spatially varying material chord lengths, i.e., the mixing statistics were allowed to be nonhomogeneous. Analytical solutions were obtained and used to produce a verifi cation suite for the Imp IMC Levermore-Pomraning implementation for different spatial variations of the chord lengths. However, the accuracy of the LP model when the mixing statistics are nonhomogeneous has not been assessed and leaves open the question of whether local accuracy is improved or further degraded when chord lengths are not uniform. This shortcoming is rectifi ed here by developing benchmark analytic solutions for transport in binary Markovian stochastic mixtures in rod geometry with nonhomogeneous mixing statistics, using spatially varying chord lengths considered in the previous investigation based on the LP model. Methods for sampling a nonhomogeneous Poisson process (NHPP) are first described and used to construct individual realizations of the binary mixtures in rod geometry. Analytic solutions are then obtained for the forward and backward directed fluxes on a given realization, now viewed as a deterministic medium with alternating layers of the two materials with known interface locations. Finally, material averaged scalar fluxes are obtained using these sampling schemes with spatially linear and quadratic chord lengths and used to assess the accuracy of the previously obtained LP-model results.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Analysis and Testing of Parsons NGS Solvent Formulation

Three drums containing solvent used during the Next Generation Solvent Test (NGST) conducted by Parsons in 2014-2015 were received at SRNL. After homogenization, samples from each drum were removed, and a composite sample prepared. This composite was analyzed to determine current SRNL characterization method efficacy, and to determine if the 1,3-dicyclohexyl-2- (isotridecyl) guanidine (DCiTG) suppressor could be selectively removed. The results of this work indicate that the titration analytical method currently employed at SRNL is effective at quantitating the DCiTG. The nuclear magnetic resonance (NMR) method at SRNL can detect the DCiTG, as well its amine and urea decomposition products. However, further development work will be required to allow the 1 H NMR method to quantitate these species. A series of three washing tests were performed on composite samples of the solvent. The results show that up to 67% of the DCiTG was removed from the solvent by simple washing, at multiple ratios of solvent: aqueous phase. This may indicate that a simple pathway exists to wash out the DCiTG and reclaim the solvent (~150 gallons) for future use at the Salt Waste Processing Facility (SWPF).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Variance Preserving Spectral Subsampling

Generating statistically faithful short-duration gamma-ray spectra from a single long measurement is essential in nuclear safeguards, supporting tasks such as algorithm development and machine-learning applications, especially when list-mode data are unavailable. Existing subsampling methods often distort the statistical characteristics of genuine short-duration measurements, leading to biased or unreliable analytical outcomes and thereby undermining downstream tasks. In this work, we compare five subsampling approaches using a benchmark set of 156 genuine replicate spectra collected with a high-purity germanium detector. We evaluate each method with respect to run-to-run variance, channel-to-channel variance, and preservation of total counts (losslessness). Across a wide range of subsampling ratios, only binomial subsampling without replacement consistently reproduces the statistical properties of genuine short-duration spectra, maintaining proper dispersion even in sparse spectral regions and perfectly preserving total counts. These results provide a mathematically principled and practically validated framework for generating synthetically shortened spectra when true short-duration measurements are unavailable.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Wishart AGU 2013

Shales are a component of the terrestrial subsurface biosphere and may be colonized by microorganisms when temperature and fluid flow are permitting. Assessing microbial community activity will be aided by the use of in situ sampling devices such as the osmosampler, an osmotically driven sampling device. Community analysis of shale samples remains a challenge and requires further methods development. The objectives of the work reported are: 1. to review geochemical and microbiological evidence for the possible microbial inhabitation of shale 2. to compare conditions among U.S. shale formations 3. to develop analytical techniques to evaluate microbial communities present in hydraulic fracturing fluid.

03 NATURAL GAS↗