Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ADHESIVES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

The Novel X-Ray Visible Zein-Based Non-adhesive Precipitating Liquid Embolic HEI{sub E1-2017}: An Exploratory Study

Purpose: To investigate the novel zein-based non-adhesive precipitating liquid embolic HEI{sub E1-2017}. Materials and Methods: Zein-based liquid embolics are an own class of embolization material. In this study, HEI{sub E1-2017}, a novel zein-based liquid embolic, was investigated. Visibility was assessed in vitro in CT and MRI phantoms, embolization characteristics were assessed in vivo in the kidneys of 12 pigs. Components of HEI{sub E1-2017} were zein as occlusion material, ethanol as solvent, and iodized oil as radiopaque material. HEI{sub E1-2017} was used in pure (HEI-PURE) and manually modified (HEI-MOD) form and compared with 6% ethylene vinyl alcohol copolymer (EVOH). Different radiological methods (CT, MRI, DSA, cone-beam CT, and micro-CT) and histopathologic analyses were applied to compare visibility and vascular occlusion patterns. Results: In CT phantoms, all embolics were definitely visible as hyperdense materials. In MRI phantoms, signal-to-noise ratio was highest for HEI-PURE, followed by HEI-MOD and EVOH. In all kidneys, embolization procedures were technically successful and without complications. In DSA, all embolics were definitely visible during and after embolization. Only EVOH caused substantial artifacts in cone-beam CT and CT. In micro-CT and histopathology, HEI-PURE showed a homogeneous occlusion from segmental arteries to glomerular capillaries. HEI-MOD demonstrated the deepest vascular penetration (up to the level of peritubular capillaries), but with an inhomogeneous distribution. For EVOH, there was inhomogeneous vascular occlusion from segmental arteries to glomerular capillaries. Conclusion: HEI{sub E1-2017} is a promising novel zein-based liquid embolic. Further preclinical and clinical studies with higher case numbers and long-term follow-up are needed to further assess the value of this embolic material.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2021

Single pot catalyst strategy to branched products via adhesive isomerization and hydrocracking of polyethylene over platinum tungstated zirconia

Hydrocracking is an insufficiently explored route for chemical recycling of plastics waste. Platinum tungstated zirconia (Pt-WZr) was used in a batch reactor at low temperatures of 250 °C and 30 bar H 2 pressure for 1-24 h reaction times using low-density polyethylene (LDPE, M w ~76 kDa). We find Pt-WZr is a bifunctional catalyst for LDPE hydrocracking leading to higher value branched fuel- and lubricant-ranged alkanes. Here we demonstrate that the catalyst metal-to-acid site molar ratio (MAB) shifts the product distribution to larger cracked products and increases the isomerization degree in the residual polymer. We propose a new adhesive isomerization mechanism between the metal and Brønsted acid sites in parallel with slow polymer chain cracking, caused by competitive adsorption of the polymer over the liquid products and stereochemical hindrance of methines. This study provides a blueprint on how to engineer effective catalysts for hydrocracking polyolefin plastic wastes using the MAB as a catalyst descriptor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Collagen VI suppresses fibronectin-induced enteric neural crest cell migration by downregulation of focal adhesion proteins

Highlights: • We identified 1355 differentially expressed genes in intestine during development. • The identified differentially expressed genes were enriched extracellular proteins. • Collagen VI reduced fibronectin-induced enteric neural crest cell migration. • Collagen VI promoted the down regulation of fibronectin-induced p130{sup Cas} proteins. The enteric nervous system (ENS) is a network of neurons and glia that are derived from enteric neural crest cells (ENCCs) and essential for regulating peristaltic activity of the colon. ENCCs migrate along the gastrointestinal tract to form the ENS, and disruption of ENCC motility leads to ENS disorders, such as Hirschsprung's disease. Previous ENCC-transplant experiments show that ENCCs can invade into isolated mouse intestines by age E13.5, but not after E15.5. We hypothesized that altered age-specific micro-environments in the intestine are responsible for ENCC invasion/migration. Here, we compared gene expression in the intestine between at E11.5 and E15.5 and identified 1355 differentially expressed transcripts. Among these, we found that genes encoding extracellular matrix (ECM) proteins were enriched. Notably, collagen VI (ColVI) family members were upregulated in the E15.5 mouse intestine at the mRNA and protein levels, whereas fibronectin (FN) was downregulated; however, both proteins showed colocalization at E15.5. To understand the mechanisms of ColVI and FN in ENCC migration, we examined neurosphere or individual ENCC-adherence capabilities toward the ECM. ColVI suppressed FN-induced ENCC spreading/migration, whereas ColVI induced morphologically narrow ENCC spreading and weak stress-fiber formation as compared with those with FN. Additionally, in ENCCs cultured on plates containing ColVI, the expression and phosphorylation of p130{sup Cas}, a members of focal adhesion complexes, was reduced. These data indicated an inhibitory role of ColVI in ENCC migration and suggested that ColVI suppression in the intestine might represent a novel therapeutic strategy for aganglionic colonic diseases.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

Wash-free and selective imaging of epithelial cell adhesion molecule (EpCAM) expressing cells with fluorogenic peptide ligands

Highlights: • We functionalized an EpCAM-binding peptide to develop fluorogenic ligands. • The synthesized peptides achieve wash-free and selective labeling of EpCAM{sup +} cells. • The fluorogenic peptides is promising to generate a device for CTC diagnoses. Detection of the cells expressing an epithelial cell adhesion molecule (EpCAM) is a crucial step to identify circulating tumor cells (CTCs) from blood. To detect the EpCAM, we here designed and synthesized a series of fluorogenic peptides. Specifically, we functionalized an EpCAM-binding peptide, Ep114, by replacing its amino acids to an aminophenylalanine that was modified with environmentally sensitive 7-nitro-2,1,3-benzoxadiazole (NBD-amPhe). Among six synthesized peptides, we have found that two peptides, Q4X and V6X (X represents NBD-amPhe), retain the Ep114's binding ability and specifically mark EpCAM-expressing cells by just adding these peptides to the cultivation medium. Our wash-free, fluorogenic peptide ligands would boost the development of next generation devices for CTC diagnoses.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

Epithelial cell adhesion molecule expression in hepatic stem/progenitor cells is controlled by the molecular clock system

Highlights: • We investigated clock gene effects on EpCAM-positive cell induction in hepatitis. • Hepatitis in CLOCK mutant mice was severe compared with wild-type mice. • CLOCK regulated expression of LEF, which regulated EpCAM expression. • CLOCK was important for healing hepatitis. The circadian rhythm, which regulates various body functions, is transcriptionally controlled by a series of clock gene clusters. The clock genes are related to the pathology of various kinds of diseases. Although there is evidence of serious sleep disorders in patients with chronic hepatitis, the liver regeneration mechanism under chronic hepatitis conditions and its association with the clock genes are not clear. In this study, the influence of the circadian locomotor output cycles kaput (CLOCK), which is one of the clock genes, on a 3,5-diethoxycarbonyl-1,4-dihydrocollidine (DDC)-induced hepatitis animal model was investigated. The appearance of potential hepatic stem-like cells (epithelial cell adhesion molecule [EpCAM]-positive cells) is an initial critical step in liver regeneration during chronic inflammation. The results showed a considerable number of hepatic EpCAM-positive cells in the wild-type (WT) mice 1 week after the DDC feeding. However, the number of EpCAM-positive cells in the Clock-mutant (Clk/Clk) mice decreased, and their hepatitis was worse compared with the WT mice. In addition, the expression of Epcam mRNA, which is a functional marker of potential hepatic stem-like cells, was controlled by LEF1, which was regulated by CLOCK. The results of this study will facilitate the elucidation of the liver regeneration mechanisms, including those at the molecular level, and may assist in the development of new treatment modalities in the future.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

Quantification of glioblastoma progression in zebrafish xenografts: Adhesion to laminin alpha 5 promotes glioblastoma microtumor formation and inhibits cell invasion

Highlights: • Developed an embryo-larval zebrafish model to study GBM progression. • Quantitatively measured GBM BV association, invasion and microtumor formation. • Laminin alpha 5 decreases U251MG dispersal and increases microtumors. • Microenvironmental laminin alpha 5 slows U251MG cell invasion in vivo. Glioblastoma (GBM) is a deadly disease due to its ability to quickly invade and destroy brain tissue. Slowing or stopping GBM cell progression is crucial to help those inflicted with the disease. Our lab created an embryo-larval zebrafish xenograft model as a tool to study human GBM progression in an observable brain environment. The zebrafish brain is a dynamic and complex environment providing an optimal setting for studying GBM cell progression. Here we demonstrate the ability of our model to quantitate GBM proliferation, dispersal, blood vessel association, microtumor formation, and individual cell invasion by evaluating the importance of an extracellular matrix protein, laminin alpha 5 (lama5), on U251MG cell progression. Lama5 has been implicated in cancer cell survival, proliferation and invasion and is a known adhesion site for GBM cells. While lama5 is highly expressed in endothelial cells in the brain, it is unknown how lama5 affects GBM behavior. Using a lama5 morpholino, we discovered that lama5 decreased U251MG dispersal by 23% and doubles the formation of blood vessel dependent microtumors. Despite lama5 being a known attachment site for GBM, lama5 expression had no effect on U251MG association with blood vessels. Analysis of individual U251MG cells revealed lama5 significantly lowered invasion as mobile U251MG cells traveled 32.5 μm less, invaded 5.0 μm/hr slower and initiated invasion 60% few times per cell.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2016

Integrating carbon nanotube forests into polysilicon MEMS: Growth kinetics, mechanisms, and adhesion

The growth of carbon nanotubes (CNTs) on polycrystalline silicon substrates was studied to improve the design of CNT field emission sources for microelectromechanical systems (MEMS) applications and vacuum microelectronic devices (VMDs). Microwave plasma-enhanced chemical vapor deposition (PECVD) was used for CNT growth, resulting in CNTs that incorporate the catalyst particle at their base. The kinetics of CNT growth on polysilicon were compared to growth on Si (100) using the model of Deal and Grove, finding activation energies of 1.61 and 1.54 eV for the nucleation phase of growth and 1.90 and 3.69 eV for the diffusion-limited phase on Si (100) and polysilicon, respectively. Diffusivity values for growth on polysilicon were notably lower than the corresponding values on Si (100) and the growth process became diffusion-limited earlier. Evidence favors a surface diffusion growth mechanism involving diffusion of carbon precursor species along the length of the CNT forest to the catalyst at the base. Explanations for the differences in activation energies and diffusivities were elucidated by SEM analysis of the catalyst nanoparticle arrays and through wide-angle X-ray scattering (WAXS) of CNT forests. As a result, methods are presented to improve adhesion of CNT films during operation as field emitters, resulting in a 2.5× improvement.

36 MATERIALS SCIENCE↗
DOE OSTI2016

An evaluation of complementary approaches to elucidate fundamental interfacial phenomena driving adhesion of energetic materials

In this study, cohesive Hamaker constants of solid materials are measured via optical and dielectric properties (i.e., Lifshitz theory), inverse gas chromatography (IGC), and contact angle measurements. To date, however, a comparison across these measurement techniques for common energetic materials has not been reported. This has been due to the inability of the community to produce samples of energetic materials that are readily compatible with contact angle measurements. Here we overcome this limitation by using physical vapor deposition to produce thin films of five common energetic materials, and the contact angle measurement approach is applied to estimate the cohesive Hamaker constants and surface energy components of the materials. The cohesive Hamaker constants range from 85 zJ to 135 zJ across the different films. When these Hamaker constants are compared to prior work using Lifshitz theory and nonpolar probe IGC, the relative magnitudes can be ordered as follows: contact angle > Lifshitz > IGC. Furthermore, the dispersive surface energy components estimated here are in good agreement with those estimated by IGC. Due to these results, researchers and technologists will now have access to a comprehensive database of adhesion constants which describe the behavior of these energetic materials over a range of settings.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Analysis of electrically conductive adhesives in shingled solar modules by X-ray imaging techniques

The failure mechanisms of electrically conductive adhesives (ECAs) in solar modules are difficult to study since the ECA layer is not easily accessible within the module package. In this work, we present two complementary imaging modalities—X-ray radiography and X-ray microcomputed tomography (XCT)—that reveal important morphological features of the ECA within a shingled module. X-ray radiography uses single X-ray projections to provide fast and non-destructive imaging of the shingled interconnection, illuminating the alignment of the ECA relative to the busbars, the size and shape of the ECA, and the presence of voids within it. Through X-ray radiography, we observed, for example, that the average void coverage area of ECA segments reduced from 36.7% to 4.4% when an ECA was cured for 60 s prior to module lamination. XCT is a three-dimensional imaging technique that can identify regions in which the ECA makes electrical contact to busbars on cells and regions in which the ECA has cracked, among other features. XCT can also be used to image the individual metal particles within ECA, from which the metal volume fraction of an ECA was found here to be 70.4%. This is a quantity that is not often reported by ECA manufacturers but is important to ensure isotropic conduction. As X-ray projections can be performed non-destructively on full modules, the technique may be used to pinpoint ECA failures in accelerated degradation testing. XCT is complementary and is suited to forensic analysis of failing modules.

14 SOLAR ENERGY↗
DOE OSTI2021

Improvement of interfacial adhesion of unidirectional textile grade carbon fiber (TCF) with unsized, epoxy and urethane sizing reinforced in thermoset urethane composites

This work considers a unique wide tow (450k filaments) form of low-cost carbon fiber intended for non-aerospace applications. TCF is currently produced in epoxy and urethane sizing, and there is a need to understand its resulting composite properties. In this work, the interfacial adhesion of sized TCF reinforced in thermoset urethane (TSU) composites are examined through the surface, thermal and mechanical characterization techniques. Atomic force microscopy (AFM) results showed an increase in surface roughness for urethane (276%) and epoxy sized (78%) versus unsized TCF. XPS results showed 531% increase in O in epoxy sized TCF and 250% N content in urethane sized TCF compared to unsized TCF. The surface energy of epoxy and urethane sized TCF is enhanced by 78% and 96%, respectively compared to unsized TCF. The storage modulus showed improvement for urethane (23%) and epoxy (21%) sized than unsized TCF-TSU composites. The flexural, interlaminar shear strength (ILSS), and impact properties of urethane sized TCF increase by 24%, 50%, and 273%, respectively, than unsized TCF. The results demonstrate that the surface and thermal properties correlate with the mechanical properties of TCF-TSU composites and sizing enhances the wettability of the composites.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Calorimetric measurement of adsorption and adhesion energies of Cu on Pt(111)

The adsorption energies of submonolayer amounts of one metal on the surface of another metal have been measured for decades by temperature programmed desorption. However, that method fails for metals that alloy. We report here the first measurement of the adsorption energy for any such metal-on-metal combination that forms a bulk alloy. The adsorption and interfacial energetics of vapor deposited Cu onto Pt(111) at 300 K has been studied herein using single crystal adsorption calorimetry (SCAC) and X-ray photoelectron spectroscopy (XPS). The Cu grows as 2D pseudomorphic islands in the first layer and its heat of adsorption decreased linearly from 358 to 339 kJ/mol. This is attributed to increasing lattice strain with island size, associated with the small lattice mismatch (8%). It adsorbs ~2 kJ/mol more weakly in the 2nd layer than above 3 ML, where it reaches the bulk heat of sublimation of Cu(solid), 337 kJ/mol. The adhesion energy of multilayer Cu onto Pt(111) is 3.76 J/m 2 . The extra stability of the first Cu monolayer compared to bulk Cu measured here is ~12 kJ/mol, compared to a difference of ~83 kJ/mol for underpotential deposition of Cu on a Pt(111) electrode, with the difference attributed to stronger bonding of Cu to the solvent and double layer compared to Pt.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Infant gut strain persistence is associated with maternal origin, phylogeny, and traits including surface adhesion and iron acquisition

Gut microbiome succession affects infant development. However, it remains unclear what factors promote persistence of initial bacterial colonizers in the developing gut. Here, we perform strain-resolved analyses to compare gut colonization of preterm and full-term infants throughout the first year of life and evaluate associations between strain persistence and strain origin as well as genetic potential. Analysis of fecal metagenomes collected from 13 full-term and 9 preterm infants reveals that infants' initially distinct microbiomes converge by age 1 year. Approximately 11% of early colonizers, primarily Bacteroides and Bifidobacterium, persist during the first year of life, and those are more prevalent in full-term, compared with preterm infants. Examination of 17 mother-infant pairs reveals maternal gut strains are significantly more likely to persist in the infant gut than other strains. Enrichment in genes for surface adhesion, iron acquisition, and carbohydrate degradation may explain persistence of some strains through the first year of life.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2011

Focal adhesion protein abnormalities in myelodysplastic mesenchymal stromal cells

Direct cell-cell contact between haematopoietic progenitor cells (HPCs) and their cellular microenvironment is essential to maintain 'stemness'. In cancer biology, focal adhesion (FA) proteins are involved in survival signal transduction in a wide variety of human tumours. To define the role of FA proteins in the haematopoietic microenvironment of myelodysplastic syndromes (MDS), CD73-positive mesenchymal stromal cells (MSCs) were immunostained for paxillin, pFAK [Y{sup 397}], and HSP90{alpha}/{beta} and p130CAS, and analysed for reactivity, intensity and cellular localisation. Immunofluorescence microscopy allowed us to identify qualitative and quantitative differences, and subcellular localisation analysis revealed that in pathological MSCs, paxillin, pFAK [Y{sup 397}], and HSP90{alpha}/{beta} formed nuclear molecular complexes. Increased expression of paxillin, pFAK [Y{sup 397}], and HSP90{alpha}/{beta} and enhanced nuclear co-localisation of these proteins correlated with a consistent proliferative advantage in MSCs from patients with refractory anaemia with excess blasts (RAEB) and negatively impacted clonogenicity of HPCs. These results suggest that signalling via FA proteins could be implicated in HPC-MSC interactions. Further, because FAK is an HSP90{alpha}/{beta} client protein, these results suggest the utility of HSP90{alpha}/{beta} inhibition as a target for adjuvant therapy for myelodysplasia.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Pressure-Sensitive Adhesive Combined with Paper Spray Mass Spectrometry for Low-Cost Collection and Analysis of Drug Residues

Illicit drug use causes over half a million deaths worldwide every year. Drugs of abuse are commonly smuggled through customs and border checkpoints and, increasingly, through parcel delivery services. Improved methods for detection of trace drug residues from surfaces are needed. Such methods should be robust, fieldable, sensitive, and capable of detecting a wide range of drugs. In this work, commercially produced paper with a pressure-sensitive adhesive coating was utilized for the collection and analysis of trace drug residues by paper spray mass spectrometry (MS). This modified substrate was used to combine sample collection of drug residues from surfaces with rapid detection using a single paper spray ticket. The all-in-one ticket was used to probe different surfaces commonly encountered in forensic work including clothing, cardboard, glass, concrete, asphalt, and aluminum. A total of 10 drugs (acetyl fentanyl, fentanyl, clonazolam, cocaine, heroin, ketamine, methamphetamine, methylone, U-47700, and XLR-11) were evaluated and found to be detectable in the picogram range using a benchtop mass spectrometer and in the low nanogram range using a portable ion trap MS. Finally, the novel approach demonstrates a simple yet effective sampling strategy, allowing for rapid identification from difficult surfaces via paper spray mass spectrometry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Reversible Adhesion with Polyelectrolyte Brushes Tailored via the Uptake and Release of Trivalent Lanthanum Ions

Applications of end-tethered polyelectrolyte “brushes” to modify solid surfaces have been developed and studied for their colloidal stabilization and high lubrication properties. Current efforts have expanded into biological realms and stimuli-responsive materials. Our work explores responsive and reversible aspects of polyelectrolyte brush behavior when polyelectrolyte chains interact with oppositely charged multivalent ions and complexes, which act as counterions. There is a significant void in the polyelectrolyte literature regarding interactions with multivalent species. This paper demonstrates that interactions between solid surfaces bearing negatively charged polyelectrolyte brushes are highly sensitive to the presence of trivalent lanthanum, La3+. Lanthanum cations have unique interactions with polyelectrolyte chains, in part due to their small size and hydration radius which results in a high local charge density. Using La3+ in conjunction with the surface forces apparatus (SFA), adhesion has been observed to reversibly appear and disappear upon the uptake and release, respectively, of these multivalent cations acting as counterions. In media of fixed ionic strength set by monovalent sodium salt, at I0 = 0.003 M and I0 = 0.3 M, the sign of the interaction forces between overlapping brushes changes from repulsive to attractive when La3+ concentrations reach 0.1 mol % of the total ion concentration. These results are also shown to be generally consistent with, but subtlety different from, previous polyelectrolyte brush experiments using trivalent ruthenium hexamine in the role of the multivalent counterion.

Farina, Robert↗
DOE OSTI2023

Domain-Dependent Surface Adhesion in Twisted Few-Layer Graphene: Platform for Moiré-Assisted Chemistry

Twisted van der Waals multilayers are widely regarded as a rich platform to access novel electronic phases thanks to the multiple degrees of freedom available for controlling their electronic and chemical properties. Here, in this work, we propose that the stacking domains that form naturally due to the relative twist between successive layers act as an additional ”knob” for controlling the behavior of these systems and report the emergence and engineering of stacking domain-dependent surface chemistry in twisted few-layer graphene. Using mid-infrared near-field optical microscopy and atomic force microscopy, we observe a selective adhesion of metallic nanoparticles and liquid water at the domains with rhombohedral stacking configurations of minimally twisted double bi- and trilayer graphene. Furthermore, we demonstrate that the manipulation of nanoparticles located at certain stacking domains can locally reconfigure the moiré superlattice in their vicinity at the micrometer scale. Our findings establish a new approach to controlling moiré-assisted chemistry and nanoengineering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Effect of the Segmental Structure of Thermoplastic Polyurethane (Hardness) on the Interfacial Adhesion of Textile-Grade Carbon Fiber Composites

In polymer composites, the fiber–matrix interface is primarily influenced by the surface treatment of the fibers and polymer morphology. Previous studies have investigated the effect of surface treatment of carbon fiber on the mechanical properties of the resulting composites. However, very few studies have explored the chemical structural modification of polymer effect on the fiber–matrix adhesion. In this work, the interfaces of soft thermoplastic polyurethane (S-TPU) and hard-segmented TPU (H-TPU) were investigated through surface, thermal, and mechanical characterization. A textile-grade carbon fiber (TCF) with 1% concentration of epoxy sizing (an emerging material for nonaerospace applications with 450 K filament tows) was used as a reinforcement to investigate the structure–property relationship at the interface. Atomic force microscopy results showed 39% higher surface roughness for S-TPU than for H-TPU. X-ray photoelectron spectroscopy results revealed a 550% increase in C=O content, which can provide multiple hydrogen bonding networks in H-TPU, and these C=O bonds can produce a strong chemical bond at the fiber–matrix interface. Additionally, dynamic mechanical analysis and differential scanning calorimetry results confirmed the presence of hydrogen bonding that enhances the cross-linked density by 232% in H-TPU compared to S-TPU. The improved mechanical properties of H-TPU composites, such as flexural, impact and tensile by 30, 50, and 130% compared to S-TPU composites, prove that the crystallinity and hydrogen bonding significantly increase the load bearing capacity due to the strong interface. The mechanical properties of TCF–TPU composites validate the formation of chemical bonds through a nucleophilic addition reaction at the interface and improve the bond strength of the composites. Thus, tailoring the polyurethane structure broadens the performance of segmented TPU in conjunction with TCF reinforcement, which has implications for cost-effective, high-strength composites.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Adhesion and Wetting of Soft Nanoparticles on Textured Surfaces: Transition between Wenzel and Cassie-Baxter States

We use a combination of the molecular dynamics simulations and scaling analysis to study interactions between gel-like nanoparticles and substrates covered with rectangular shape posts. Our simulations have shown that nanoparticle in contact with substrate undergo first order transition between Wenzel and Cassie-Baxter state which location depends on nanoparticle shear modulus, the strength of nanoparticle-substrate interactions, height of the substrate posts and nanoparticle size, R p . There is a range of system parameters where these two states coexist such that the average indentation δ produced by substrate posts changes monotonically with nanoparticle shear modulus, G p . We have developed a scaling model that describes deformation of nanoparticle in contact with patterned substrate. In the framework of this model the effect of the patterned substrate can be taken into account by introducing an effective work of adhesion, W eff , which describes the first order transition between Wenzel and Cassie-Baxter states. There are two different shape deformation regimes for nanoparticles with shear modulus G p and surface tension γ p . Shape of small nanoparticles with size R p < γ p 3/2 G p -1 W eff -1/2 is controlled by capillary forces while deformation of large nanoparticles, R p > γ p 3/2 G p -1 W eff -1/2</sup, is determined by nanoparticle elastic and contact free energies. The model predictions are in a good agreement with simulation results.

36 MATERIALS SCIENCE↗