Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ACTIVATION ENERGY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Toward alcohol synthesis from CO hydrogenation on Cu(111)-supported MoS 2 – predictions from DFT+KMC

In the quest for cheap and efficient catalysts for alcohol synthesis from syngas, a material of interest is single-layer MoS2 owing to its low cost, abundancy, and flexible structure. Because of the inertness of its basal plane, however, it is essential to find ways that make it catalytically active. Herein, by means of density functional theory based calculations of reaction pathways and activation energy barriers and accompanying kinetic Monte Carlo simulations, we show that while S vacancy row structures activate the MoS 2 basal plane, further enhancement of chemical activity and selectivity can be achieved by interfacing the MoS 2 layer with a metallic support. When defect-laden MoS2 is grown on Cu(111), there is not only an increase in the active region (surface area of active sites) but also charge transfer from Cu to MoS 2 , resulting in a shift of the Fermi level such that the frontier states (d orbitals of the exposed Mo atoms) appear close to it, making the MoS 2 /Cu(111) system ready for catalytic activity. Finally, our calculated thermodynamics of reaction pathways lead to the conclusion that the Cu(111) substrate promotes both methanol and ethanol as the products, while kinetic Monte Carlo simulations suggest a high selectivity toward the formation of ethanol.

2D materials↗

Understanding the origin of structure sensitivity in hydrodechlorination of trichloroethylene on a palladium catalyst

Periodic density functional theory (DFT) calculations are employed to understand the origin of structure sensitivity in hydrodechlorination (HDC) of trichloroethylene (TCE) over different facets of a palladium catalyst. The HDC reaction is simulated on the terrace (Pd (111) and Pd (100)) and undercoordinated (Pd (211) and Pd (110)) sites of the Pd catalyst. The most stable binding configuration of TCE on the Pd surfaces is observed to be through the di-σ mode of binding, wherein each carbon atom of the TCE molecule is adsorbed atop of the Pd atom. On comparing TCE adsorption over different facets of Pd, a maximum binding energy of –178 kJ mol –1 is calculated over the Pd (110) surface. TCE, upon adsorption on Pd catalyst, undergoes dechlorination followed by hydrogenation of the hydrocarbon intermediates. The activation energies for C–Cl bond dissociation steps are significantly low when compared to the hydrogenation steps. The chlorine released from dechlorination tends to block the active sites, thereby poisoning the surface with high binding energies (B.E > –160 kJ mol –1 ) on all the surfaces. The trend in chlorine binding energies on Pd facets follows: Pd (110) > Pd (211) > Pd (100) > Pd (111). The removal of surface chlorine is facilitated by its reaction with surface hydrogen to form hydrogen chloride. The activation energy for hydrogen chloride formation is calculated to be 90 kJ mol –1 and 88 kJ mol –1 on Pd (111) and Pd (100) terrace sites, respectively and 109 kJ mol –1 and 118 kJ mol –1 on the step Pd (211) and corrugated Pd (110) facets, respectively. This suggests the ease of removal of Cl as HCl from the terrace sites as compared to the step and corrugated sites. The structure sensitivity in the TCE HDC reaction could possibly arise due to the differences in the energetics of Cl removal on different Pd facets. As a result, this mechanistic understanding could provide a rationale for designing suitable catalysts for the HDC of TCE.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and dielectric properties of zinc oxide nanoparticles using a biotemplate

Zinc Oxide nanoparticles are synthesized using DNA as capping agent. Zinc oxide nanoparticles are synthesized using DNA as a capping agent. Structural and morphological characterizations are done using SEM, FTIR and XRD. The particle size and lattice parameters are calculated from the diffraction data. The optical properties are studied using UV-Vis absorption spectroscopy and bandgap variation with temperature is determined. The dielectric property of nanoparticles is studied by varying temperature and frequency. The dielectric constant and dispersion parameters are found out. Method of Cole-Cole analysis is used to study the high temperature dispersion of relaxation time. The variation of both AC and DC conductivity are studied and activation energy calculated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

New acceptor centers of the background impurities in p-CdZnTe

Low-temperature photoluminescence data are used to study the redistribution of the background impurities and host components of p-CdZnTe single crystals with a resistivity of 1-50 {Omega} cm upon their interaction with infrared laser radiation. The effect of widening of the band gap and the formation of new acceptor centers in response to laser-stimulated changes in the system of intrinsic defects are established. The activation energy of the new acceptor centers is determined.

36 MATERIALS SCIENCE↗

A Quasi-Classical Model of the Hubbard Gap in Lightly Compensated Semiconductors

A quasi-classical method for calculating the narrowing of the Hubbard gap between the A{sup 0} and A{sup +} acceptor bands in a hole semiconductor or the D{sup 0} and D{sup –} donor bands in an electron semiconductor is suggested. This narrowing gives rise to the phenomenon of a semiconductor transition from the insulator to metal state with an increase in doping level. The major (doping) impurity can be in one of three charge states (–1, 0, or +1), while the compensating impurity can be in states (+1) or (–1). The impurity distribution over the crystal is assumed to be random and the width of Hubbard bands (levels), to be much smaller than the gap between them. It is shown that narrowing of the Hubbard gap is due to the formation of electrically neutral acceptor (donor) states of the quasicontinuous band of allowed energies for holes (electrons) from excited states. This quasicontinuous band merges with the top of the valence band (v band) for acceptors or with the bottom of the conduction band (c band) for donors. In other words, the top of the v band for a p-type semiconductor or the bottom of the c band for an n-type semiconductor is shifted into the band gap. The value of this shift is determined by the maximum radius of the Bohr orbit of the excited state of an electrically neutral major impurity atom, which is no larger than half the average distance between nearest impurity atoms. As a result of the increasing dopant concentration, the both Hubbard energy levels become shallower and the gap between them narrows. Analytical formulas are derived to describe the thermally activated hopping transition of holes (electrons) between Hubbard bands. The calculated gap narrowing with increasing doping level, which manifests itself in a reduction in the activation energy ε{sub 2} is consistent with available experimental data for lightly compensated p-Si crystals doped with boron and n-Ge crystals doped with antimony.

36 MATERIALS SCIENCE↗

Oxidative Dehydrogenation of Isobutane on Phosphorous-Modified Graphitic Mesoporous Carbon

Phosphorous heteroatoms were added in order to tune the selectivity and investigate the roles of different oxygen species in graphitic mesoporous carbons for the oxidative dehydrogenation reaction of isobutane to isobutene. Small changes in the apparent isobutane activation energy are consistent with the notion that the phosphorous groups do not change the nature of the active sites but they interfere with the availability of the sites. Our results show that the improvement on selectivity is not proportional to the amount of phosphorous added. Small phosphorous content improved the selectivity by suppressing the combustion of isobutane. However, a higher amount of phosphorous groups lead to coverage of selective quinone sites and/or creation of active sites favorable to total oxidation.

2-METHYLPROPANE↗

Charge carrier transport mechanisms in perovskite CdTiO{sub 3} fibers

Electrical transport properties of electrospun cadmium titanate (CdTiO{sub 3}) fibers have been investigated using ac and dc measurements. Air annealing of as spun fibers at 1000 °C yielded the single phase perovskite fibers having diameter ∼600 nm - 800 nm. Both the ac and dc electrical measurements were carried out at temperatures from 200 K – 420 K. The complex impedance plane plots revealed a single semicircular arc which indicates the interfacial effect due to grain boundaries of fibers. The dielectric properties obey the Maxwell-Wagner theory of interfacial polarization. In dc transport study at low voltages, data show Ohmic like behavior followed by space charge limited current (SCLC) with traps at higher voltages at all temperatures (200 K – 420 K). Trap density in our fibers system is N{sub t} = 6.27 × 10{sup 17} /cm{sup 3}. Conduction mechanism in the sample is governed by 3-D variable range hopping (VRH) from 200 K – 300 K. The localized density of states were found to be N(E{sub F}) = 5.51 × 10{sup 21} eV{sup −1} cm{sup −3} at 2 V. Other VRH parameters such as hopping distance (R{sub hop}) and hopping energy (W{sub hop}) were also calculated. In the high temperature range of 320 K – 420 K, conductivity follows the Arrhenius law. The activation energy found at 2 V is 0.10 eV. Temperature dependent and higher values of dielectric constant make the perovskite CdTiO{sub 3} fibers efficient material for capacitive energy storage devices.

36 MATERIALS SCIENCE↗

Molecular Origins of the Barriers to Proton Transport in Acidic Aqueous Solutions

The self-consistent iterative multistate empirical valence bond (SCI-MS-EVB) method is used to analyze the structure, thermodynamics, and dynamics of hydrochloric acid solutions. The reorientation timescales of irreversible proton transport are elucidated by simulating 0.43 M, 0.85 M, 1.68 M, and 3.26 M HCl solutions at 270 K, 285 K, 300 K, 315 K, and 330 K. The results indicate increased counter-ion pairing with increasing concentration, which manifests itself via a reduced hydronium oxygen–chloride (O*-Cl) structuring in the radial distribution functions. Increasing ionic concentration also reduces the diffusion of the hydrated excess protons, principally by reducing the contribution of the Grotthuss proton hopping (shuttling) mechanism to the overall diffusion process. In agreement with prior experimental findings, a decrease in the activation energy of reorientation timescales was also observed, which is explicitly explained using activated rate theory and an energy-entropy decomposition of the state-averaged radial distribution functions. Furthermore, these results provide atomistic verification of suggestions from recent two-dimensional infrared spectroscopy experiments that chloride anions (as opposed to hydrated excess protons) create entropic barriers to proton transport.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stable and metastable Si negative-U centers in AlGaN and AlN

Electron paramagnetic resonance studies of Si-doped Al{sub x}Ga{sub 1−x}N (0.79 ≤ x ≤ 1.0) reveal two Si negative-U (or DX) centers, which can be separately observed for x ≥ 0.84. We found that for the stable DX center, the energy |E{sub DX}| of the negatively charged state DX{sup −}, which is also considered as the donor activation energy, abruptly increases with Al content for x ∼ 0.83–1.0 approaching ∼240 meV in AlN, whereas E{sub DX} remains to be close to the neutral charge state E{sub d} for the metastable DX center (∼11 meV below E{sub d} in AlN).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An automated cluster surface scanning method for exploring reaction paths on metal-cluster surfaces

Metal-cluster surfaces present a wide variety of unique coordination environments. This complexity makes it difficult to manually probe the surface reactivity of such clusters. Here, we present a simple and automated method to systematically discover reaction pathways on cluster surfaces, based on the automated cluster surface scanning (ACSS) technique for mapping out potential energy surfaces. We showcase our method on 55-atom icosahedral Cu and Ag clusters, where we determine the activation energies of four elementary steps common in heterogeneous catalysis – hydrogen recombination (H* + H* → H 2 * + *), oxygen recombination (O* + O* → O 2 * + *), water formation (OH* + H* → H 2 O* + *), and CO oxidation (CO* + O* → CO 2 * + *) – with density functional theory calculations (DFT-PBE + D3). We show that the ACSS method requires significantly less human effort than the established manually performed climbing-image nudged elastic band (MP + CI-NEB) technique and locates transition states with comparable accuracy (root-mean-squared error of 0.10 eV) and similar computational cost. Rigorous sampling of the potential energy surface with the ACSS method allows one to locate all lowest-energy reaction pathways obtained via the MP+CI-NEB approach, as well as alternative pathways that one may have missed with the MP+CI-NEB approach due to the many possible pathways available on these clusters. The accuracy and efficiency afforded by the ACSS method could enable high-throughput exploration of the diverse reactivity of metal clusters.

36 MATERIALS SCIENCE↗

Pore accessibility of methane and carbon dioxide in coals

Two Australian coals were heat-treated, and the accessibility of the pore space to CH{sub 4} and CO{sub 2} was investigated. Samples heat-treated at 573 and 673 K exhibit larger adsorption/desorption hysteresis and smaller surface areas (measured by CO{sub 2} adsorption at 273 K) than untreated samples. For samples heat-treated at 773 K, however, the surface area increased by 50% and the hysteresis was lower, compared to untreated samples. These results demonstrate that volatile hydrocarbons at pore mouths are the cause of energy barriers that prevent adsorbing molecules from passing through. A conceptual model is proposed to illustrate changes in activation energy at constricted pore mouths. Also, the results suggest that both adsorption and desorption isotherms should be measured to determine kinetically inaccessible pore spaces in order to correctly estimate CH{sub 4} recovery and CO{sub 2} storage capacity. The results have importance to the problem of estimating CH{sub 4} recovery and CO{sub 2} storage capacity for CO{sub 2} geosequestration as part of a CO{sub 2}-enhanced coal bed methane recovery operation. 28 refs., 11 figs., 5 tabs.

01 COAL, LIGNITE, AND PEAT↗

First-Principles-Based Study of the Decomposition of Phenol and Hydroquinone on Pt(111) Combined with Quantitative Information from XPS Spectra to Address the Impact of Coverage and Number of Hydroxyl Functional Groups

A combined first-principles-based and experimental X-ray photoelectron spectroscopy approach was used to investigate the thermal decomposition of two model biofuel compounds, phenol and hydroquinone, on Pt(111) at both low and high coverages. The DFT-based approach yields adsorption geometries and energies, activation barriers and core-level binding energy shifts for C 1s and O 1s. Increasing the coverage in the theoretical model leads to slight shifts in core-level binding energies─toward higher values for C 1s and lower values for O 1s. It also alters the energy profiles of the decomposition reaction pathway, resulting in weaker adsorption energies and changes in both reaction and activation barriers. At low temperatures, we observe a multilayer for phenol and hydroquinone upon adsorption, with desorption occurring at 200 and 270 K, respectively. Following desorption of the multilayer, decomposition proceeds via initial O–H bond scission, followed by two parallel pathways involving either C–H or C–C bond scission, whereby in the case of phenol C–H bond scission occurs first. Here, we further provide characteristic core level binding energies by theoretical calculations that are subsequently used in experimental analyses, establishing a reference database for key spectra of phenolic functionalities applicable to a range of catalytic reactions.

09 BIOMASS FUELS↗

Thermal stability of the prominent compensating (Al{sub Zn}–V{sub Zn}) center in ZnO

Electron paramagnetic resonance spectroscopy is used to investigate the thermal stability of the Aluminum–Zinc vacancy (Al{sub Zn}–V{sub Zn}) complex created in bulk single crystalline ZnO by room temperature electron irradiation with an energy of 1.2 MeV. Two different stages in the annealing process at 160 and 250 °C with apparent activation energies of E{sub A1} = 1.5 ± 0.2 eV and E{sub A2} = 1.9 ± 0.2 eV, respectively, are observed. The second stage leads to the complete annealing out of the (Al{sub Zn}–V{sub Zn}) complex and is accompanied by restoration of the concentration of the Al{sub Zn} shallow donor centers to its initial value in as-grown (i.e., not irradiated) material. The obtained results prove that the (Al{sub Zn}–V{sub Zn}) complex is the dominant acceptor responsible for compensation of n-type-dopants in the studied Al-containing ZnO samples.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Review of Calculations on Point Defect Properties in Delta-Pu

The results of theoretical predictions of properties for vacancies and self-interstitial atoms (SIA) in δ-Pu are presented and reviewed. Three methods have been used for these predictions, namely the modified embedded atom method (MEAM), density functional theory (DFT) with and without spin polarization, and continuum mechanics (CM) models adapted to plutonium. The properties considered are formation and migration energies, and relaxation volumes of vacancies and SIA. Predicted values vary considerably. Nevertheless, all three methods predict that the activation energy for self-diffusion by vacancies is of similar magnitude as the SIA formation energy. Furthermore, the absolute magnitudes of relaxation volumes for vacancies and SIA are also similar, indicating that there exist no large bias for radiation-induced void swelling.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Size-dependent selectivity and activity of silver nanoclusters in the partial oxidation of propylene to propylene oxide and acrolein : A joint experimental and theoretical study.

Model silver nanocatalysts between 9 and 23 nm in size were prepared by size-selected cluster deposition from a free cluster beam on amorphous alumina films and their size-dependent catalytic performance studied in the partial oxidation of propylene under realistic reaction conditions. Smaller clusters preferentially produced acrolein, while the 23 nm particles were considerably more selective towards the formation of propylene oxide, at reaction rates far exceeding those previously reported for larger silver particles. The activity of clusters dropped significantly with increasing particle size. First-principle calculations, of the activation energies for oxygen adsorption and its dissociation, at variable surface coverage yielded surface energies which resulted in particle shapes resembling the experimentally observed shapes of partially oxidized silver clusters. The calculated activation barriers for propylene oxide and acrolein formation on various facets and on the edges of the nanoparticles provided detailed information about the energetics of the competing reaction pathways. The size- and corresponding morphology dependent theoretical activity and selectivity are in good accord with experimental observations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Growth kinetics and island evolution during double-pulsed molecular beam epitaxy of InN

The kinetic processes of InN growth using alternating source fluxes with sub-monolayer In pulses in plasma-assisted molecular beam epitaxy have been investigated. Growth at various temperatures reveals the existence of two growth regimes. While growth at low temperatures is solely governed by surface diffusion, a combination of decomposition, desorption, and diffusion becomes decisive at growth temperatures of 470 °C and above. At this critical temperature, the surface morphology changes from a grainy structure to a structure made of huge islands. The formation of those islands is attributed to the development of an indium adlayer, which can be observed via reflection high energy electron diffraction monitoring. Based on the growth experiments conducted at temperatures below T{sub Growth} = 470 °C, an activation energy for diffusion of 0.54 ± 0.02 eV has been determined from the decreasing InN island density. A comparison between growth on metalorganic vapor phase epitaxy GaN templates and pseudo bulk GaN indicates that step edges and dislocations are favorable nucleation sites. Based on the results, we developed a growth model, which describes the main mechanisms of the growth.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗