Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “vanadium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

(Ca{sup 2+}, V{sup 5+}) co-doped Y{sub 2}Ti{sub 2}O{sub 7} yellow pigment

(Ca{sup 2+}, V{sup 5+}) co-doped Y{sub 2}Ti{sub 2}O{sub 7} yellow pigments were prepared by solid route. The influence of the annealing temperature, the vanadium rate (0.02 {<=} x {<=} 0.3) and a post-mechanical grinding on the phase purity and the colour were studied using X-ray diffraction and UV-vis spectroscopy. The correlation between pigment colouration, synthesis parameters and structural feature is then discussed. Pigments with various colourations from yellow to deep orange can be obtained depending on the synthesis parameters linked to a slight modification of the vanadium coordination environment. For a same composition, the pigment colouration depends on the creation of Frenkel pairs inside the structure corresponding to a displacement of an oxygen atom toward one interstitial empty site.

36 MATERIALS SCIENCE↗

Synthesis, structural characterization and Mössbauer study of LnV{sub 0.5}Fe{sub 0.5}O{sub 3} perovskites (Ln = Y, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho and Er)

Graphical abstract: Mössbauer spectra taken at 200 K for the Y(V{sub 0.5}Fe{sub 0.5})O{sub 3} orthoferrivanadate synthesized by arc-melting. Highlights: ► LnFe{sub 0.5}V{sub 0.5}O{sub 3} were synthesized by the first time for most of the rare-earth elements. ► These orthoferrivanadates crystallize metastably with the perovskite structure. ► Iron and vanadium are trivalent stabilized in these solid solutions. ► The Mössbauer quadrupolar splitting is correlated with the tolerance factor. ► Below 100 K, these perovskites undergo a crystallographic phase transformation. -- Abstract: Perovskites LnV{sub 0.5}Fe{sub 0.5}O{sub 3} (Ln = Y, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho and Er) were synthesized by rapid solidification from arc-melted samples and characterized by the study of their crystal structure and hyperfine properties. These metastable solid solutions crystallized in the Pbnm symmetry, with the iron and vanadium cations randomly distributed in the transition metal octahedral sites. Depending on the lanthanide present at the A site of the perovskite, iron is present with two valences (i.e., Fe{sup 3+} and Fe{sup 2+}). The volume of the unit cell for these perovskites increases linearly with the lanthanide ionic radius, as the perovskite approaches its ideal structure. At room temperature, the quadrupolar splitting of the trivalent paramagnetic Mössbauer component works as an indirect measurement for the Goldshmidt tolerance factor. Close to or below 100 K, these perovskites undergo a crystallographic phase transformation, probably due to orbital ordering of the V{sup 3+} cations, originating two different magnetic iron sites.

36 MATERIALS SCIENCE↗

Effect of annealing temperature on the supercapacitor behaviour of β-V{sub 2}O{sub 5} thin films

Graphical abstract: Display Omitted Highlights: ► Structural, optical, supercapacitor properties of β-V{sub 2}O{sub 5} thin films are reported. ► Influence of annealing temperature on β-V{sub 2}O{sub 5} thin films have been studied. ► Film annealed at 300 °C exhibit lower charge transfer resistance. -- Abstract: Vanadium pentoxide thin films are prepared via sol–gel spin coating method. The films coated on FTO and glass substrates are treated at different temperatures ranging from 250 °C to 400 °C. The structural, optical and electrochemical investigations are made. X-ray diffraction analysis shows the film to be composed of V{sub 2}O{sub 5} in β-phase up to annealing temperature of 350 °C and at 400 °C the structural transformation to α-phase is observed. FTIR spectrum shows the formation of V-O bond. The SEM images reveal the formation of nanopores. Optical absorption studies indicate a band gap of 2.2–2.4 eV. The supercapacitor behaviour is studied using cyclic voltammetery technique and electrochemical impedance analysis. The vanadium pentoxide films annealed at 300 °C for an hour exhibits a maximum specific capacitance of 346 F g{sup −1} at a scan rate of 5 mV s{sup −1}.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis of doped lanthanum zirconate nanomaterials and the effect of V–Ge substitution on their structural, electrical and dielectric properties

Graphical abstract: Variation of dielectric constant with frequency for all the synthesized materials. - Highlights: • Hydrothermal method has been successfully employed to synthesize the zirconates. • XRD confirmed the formation of required phase. • Increased electrical resistivity makes these materials useful for microwave devices. • Dielectric parameters of zirconates decrease with increasing frequency. • Dielectric constant decreases with increasing substituents concentration. - Abstract: A hydrothermal method was successfully employed for the synthesis of a series of vanadium and germanium co-doped pyrochlore lanthanum zirconates with composition La{sub 2−x}V{sub x}Zr{sub 2−y}Ge{sub y}O{sub 7} (where x, y = 0.0, 0.25, 0.50, 0.75 and 1.0). The XRD and FTIR analyses confirmed the formation of single phase except vanadium and germanium substituted samples and the crystallite sizes are in the range of 7–31 nm for V{sup 3+}–Ge{sup 4+} substituted samples. The theoretical compositions are confirmed by the ED-XRF studies. The room temperature electrical resistivity increase with the substituents concentration which suggests that the synthesized materials can be used for microwave devices as such devices required highly resistive materials. Dielectric properties were measured in the frequency range of 6 kHz to 1 MHz. The dielectric parameters decrease with increase in frequency. The DC resistivity data is in good agreement with the dielectric data.

36 MATERIALS SCIENCE↗

Highly sensitive optical ammonia gas sensor based on Sn Doped V2O5 Nanoparticles

Highlights: • Facile synthesis of pure and Sn-doped vanadium oxide (V{sub 2}O{sub 5}) nanoparticles. • Fabrication of Optical ammonia gas sensors based on synthesized nanoparticles. • High optical sensing response (77.84%) for synthesized 2 wt% Sn doped V{sub 2}O{sub 5} nanoparticles towards ammonia gas. - Abstract: Herein, we present the synthesis, characterization and optical ammonia gas sensing of pure and Sn-doped vanadium oxide (V{sub 2}O{sub 5}) nanoparticles prepared by the sol-gel process. The V{sub 2}O{sub 5} nanoparticles were doped with Sn concentrations of 2 wt%–6 wt%, and characterized using X-ray diffraction, atomic force microscopy, UV–vis spectroscopy and photoluminescence spectroscopy which confirmed the orthorhombic crystal structure. The crystalline size was found to decrease with enhancing the doping concentrations of Sn. The lattice-strain and crystalline size with the peak-broadening of pure and Sn doped V{sub 2}O{sub 5} nanoparticles were analyzed by William-Hall (W-H) method and size-strain plot. The UV–vis absorption showed a decrease in the energy band gap (3.27 eV–3.07 eV) with an increase in the Sn doping concentration. The Sn-doped V{sub 2}O{sub 5} nanoparticles were used to detect ammonia gas (5–50 ppm) through photoluminescence based detection method. Interestingly, it was observed that the optical response for the 2 wt% Sn doped V{sub 2}O{sub 5} nanoparticles was maximum (77.84%) towards 50 ppm ammonia compared to other V{sub 2}O{sub 5}nanoparticles based samples.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Giant dielectric response at low frequency of B-site modified Aurivillius oxide potassium bismuth titanate

Highlights: • K{sub 0.5}Bi{sub 4.5}Ti{sub 4-x}(Al{sub 0.5}V{sub 0.5}){sub x}O{sub 12} ceramics were synthesized by the conventional solid-state reaction method. • Giant dielectric response at low frequency were observed in the KBT-AlV ceramics. • A giant dielectric constant (5.4 × 10{sup 4} at 100 Hz) was obtained in the KBT-AlV specimens. - Abstract: K{sub 0.5}Bi{sub 4.5}Ti{sub 4-x}(Al{sub 0.5}V{sub 0.5}){sub x}O{sub 15} (KBT-AlV, x = 0.00, 0.04, 0.06 and 0.08) ceramics were prepared by using the conventional solid-state reaction method. Phase analysis was performed by X-ray diffraction, and micro-structural morphology was assessed by scanning electron microscopy. The Effect of aluminium and vanadium on the structures, morphologies and electric properties of the K{sub 0.5}Bi{sub 4.5}Ti{sub 4}O{sub 12} (KBT) ceramics were investigated. Frequency dependence of the dielectric constant exhibited that the dielectric constant of the KBT ceramic is enhanced gradually by the aluminium and vanadium modification and a giant dielectric constant (5.4 × 10{sup 4} at 100 Hz) can be observed in the KBT-AlV specimens. Moreover, the reasons for the giant dielectric constant of the KBT-AlV ceramics are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

ENDF/B-VII.1 Neutron Cross Section Data Testing with Critical Assembly Benchmarks and Reactor Experiments

The ENDF/B-VII.1 library is the latest revision to the United States Evaluated Nuclear Data File (ENDF). The ENDF library is currently in its seventh generation, with ENDF/B-VII.0 being released in 2006. This revision expands upon that library, including the addition of new evaluated files (was 393 neutron files previously, now 423 including replacement of elemental vanadium and zinc evaluations with isotopic evaluations) and extension or updating of many existing neutron data files. Complete details are provided in the companion paper [M. B. Chadwick et al., 'ENDF/B-VII.1 Nuclear Data for Science and Technology: Cross Sections, Covariances, Fission Product Yields and Decay Data,' Nuclear Data Sheets, 112, 2887 (2011)]. This paper focuses on how accurately application libraries may be expected to perform in criticality calculations with these data. Continuous energy cross section libraries, suitable for use with the MCNP Monte Carlo transport code, have been generated and applied to a suite of nearly one thousand critical benchmark assemblies defined in the International Criticality Safety Benchmark Evaluation Project's International Handbook of Evaluated Criticality Safety Benchmark Experiments. This suite covers uranium and plutonium fuel systems in a variety of forms such as metallic, oxide or solution, and under a variety of spectral conditions, including unmoderated (i.e., bare), metal reflected and water or other light element reflected. Assembly eigenvalues that were accurately predicted with ENDF/B-VII.0 cross sections such as unmoderated and uranium reflected {sup 235}U and {sup 239}Pu assemblies, HEU solution systems and LEU oxide lattice systems that mimic commercial PWR configurations continue to be accurately calculated with ENDF/B-VII.1 cross sections, and deficiencies in predicted eigenvalues for assemblies containing selected materials, including titanium, manganese, cadmium and tungsten are greatly reduced. Improvements are also confirmed for selected actinide reaction rates such as {sup 236}U, {sup 238,242}Pu and {sup 241,243}Am capture in fast systems. Other deficiencies, such as the overprediction of Pu solution system critical eigenvalues and a decreasing trend in calculated eigenvalue for {sup 233}U fueled systems as a function of Above-Thermal Fission Fraction remain. The comprehensive nature of this critical benchmark suite and the generally accurate calculated eigenvalues obtained with ENDF/B-VII.1 neutron cross sections support the conclusion that this is the most accurate general purpose ENDF/B cross section library yet released to the technical community.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Microjet printing of metal salt or oxide targets for nuclear reaction studies on radionuclides

Radioactive targets for direct measurements of neutron-induced reactions are required to improve evaluated cross-section data and, ultimately, the fidelity of neutron reaction network simulations. Electrodeposition and molecular plating are the current state-of-the-art radioactive target production techniques, but not all metals can be electrodeposited or molecular plated with high yields. Alternative techniques can be expensive or may produce targets that are unsatisfactory in terms of thickness, yield, or purity. Microjet printing is a new, rather inexpensive technique that utilizes equipment with a small footprint and has the potential to produce thin, highly radioactive targets with good uniformity and minimal impurities from the target fabrication process. This study involved optimizing the process of producing microjet printed targets to allow for the fabrication of a stable vanadium(V) oxide (V 2 O 5 ) target that was compared with an analogous electrodeposition V 2 O 5 target manufactured via the application of a vanadium chemical conversion coating on aluminum (Al) foil. Finally, the results from these studies suggest microjet printing could be used to produce relatively uniform target layers with adequate film thicknesses (< 15 μm). V 2 O 5 microjet printed targets, when compared with chemical conversion coating V 2 O 5 targets, appeared to be qualitatively less uniform and quantitatively larger in thickness (11.7(27) μm vs. 5.3(18) μm). However, the conversion coating target contained more impurities and the Al backing had a higher background contribution to measurements of neutron-induced reactions as opposed to targets produced via microjet printing. Overall, the results from this study suggest microjet printing has the capability to be an excellent alternative target production technique to the electrodeposition and molecular plating methods.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Changes in mineralogical and leaching properties of converter steel slag resulting from accelerated carbonation at low CO{sub 2} pressure

Highlights: > Accelerated carbonation studied to improve environmental properties of steel slag. > Carbonation found to occur predominantly at surface of the steel slag grains. > Combined geochemical modelling and mineral analysis revealed controlling processes. > Enhanced V-leaching with di-Ca silicate (C2S) dissolution identified as major source. > Identified mineral transformations provide guidance for further quality improvement. - Abstract: Steel slag can be applied as substitute for natural aggregates in construction applications. The material imposes a high pH (typically 12.5) and low redox potential (Eh), which may lead to environmental problems in specific application scenarios. The aim of this study is to investigate the potential of accelerated steel slag carbonation, at relatively low pCO{sub 2} pressure (0.2 bar), to improve the environmental pH and the leaching properties of steel slag, with specific focus on the leaching of vanadium. Carbonation experiments are performed in laboratory columns with steel slag under water-saturated and -unsaturated conditions and temperatures between 5 and 90 {sup o}C. Two types of steel slag are tested; free lime containing (K3) slag and K1 slag with a very low free lime content. The fresh and carbonated slag samples are investigated using a combination of leaching experiments, geochemical modelling of leaching mechanisms and microscopic/mineralogical analysis, in order to identify the major processes that control the slag pH and resulting V leaching. The major changes in the amount of sequestered CO{sub 2} and the resulting pH reduction occurred within 24 h, the free lime containing slag (K3-slag) being more prone to carbonation than the slag with lower free lime content (K1-slag). While carbonation at these conditions was found to occur predominantly at the surface of the slag grains, the formation of cracks was observed in carbonated K3 slag, suggesting that free lime in the interior of slag grains had also reacted. The pH of the K3 slag (originally pH {+-} 12.5) was reduced by about 1.5 units, while the K1 slag showed a smaller decrease in pH from about 11.7 to 11.1. However, the pH reduction after carbonation of the K3 slag was observed to lead to an increased V-leaching. Vanadium leaching from the K1 slag resulted in levels above the limit values of the Dutch Soil Quality Decree, for both the untreated and carbonated slag. V-leaching from the carbonated K3 slag remained below these limit values at the relatively high pH that remained after carbonation. The V-bearing di-Ca silicate (C2S) phase has been identified as the major source of the V-leaching. It is shown that the dissolution of this mineral is limited in fresh steel slag, but strongly enhanced by carbonation, which causes the observed enhanced release of V from the K3 slag. The obtained insights in the mineral transformation reactions and their effect on pH and V-leaching provide guidance for further improvement of an accelerated carbonation technology.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Improving Electronic Conductivity of Layered Oxides through the Formation of Two-Dimensional Heterointerface for Intercalation Batteries

Synthetic strategies for the improvement in electronic conductivities and electrochemical stabilities of transition metal oxide cathodes, which are limiting factors in the performance of commercial intercalation batteries, are required for next-generation, high-performance battery systems. Furthermore, the chemical preintercalation approach, consisting of a combined sequence of a sol–gel process, extended aging, and a hydrothermal treatment, is a versatile, wet synthesis technique that allows for the incorporation of a polar species between the layers of transition metal oxides. Here, formation of a layered 2D δ-C x V 2 O 5 · n H 2 O heterostructure occurs via chemical preintercalation of dopamine molecules between bilayers of vanadium oxide followed by the hydrothermal treatment of the precipitate, leading to carbonization of the organic molecules. The presence of carbon layers within the structure has been confirmed via a combined analysis of scanning electron microscopy, X-ray diffraction, thermogravimetric analysis, Raman spectroscopy, X-ray photoelectron spectroscopy, electrochemical impedance spectroscopy, four-probe conductivity measurements, and scanning transmission electron microscopy characterization. 2D δ-C x V 2 O 5 · n H 2 O heterostructure electrodes demonstrated significantly improved electrochemical performance, particularly at higher current densities, in Li-ion cells. The heterostructure electrodes exhibited 75% of the capacity retention when the current was changed from 20 mA g –1 (206 mAh g –1 ) to 300 mA g –1 (155 mAh g –1 ), while the reference δ-V 2 O 5 · n H 2 O electrodes exhibited only 10% capacity retention in the same experiment. Remarkably, 2D δ-C x V 2 O 5 · n H 2 O heterostructure electrodes demonstrated significantly improved capacity retention (94% after 30 cycles) for bilayered vanadium oxide electrodes in Li-ion cells during galvanostatic cycling at 20 mA g –1 . The improved electrochemical performance, in both extended cycling and rate capability studies, of the 2D δ-C x V 2 O 5 · n H 2 O heterostructure electrodes in the Li-ion system is ascribed to the intermittent formation of carbon layers within the bilayered structure, which leads to increased electronic conductivity and improved structural stability of the heterostructure compared to the reference δ-V 2 O 5 · n H 2 O electrodes.

25 ENERGY STORAGE↗

Ultrathin VO 2 Films on Functional Substrates

The metal–insulator transition (MIT) in vanadium dioxide (VO 2 ) thin films is strongly affected by grain size, thickness, and interfacial properties. Typically, a minimum thickness around 50 nm is required for VO 2 to exhibit a significant MIT when functional substrates like sapphire and silicon are used. Several works have shown that thin films below 20 nm, with up to 2–3 decades of change in the resistance across the MIT, can be achieved but require complex pre- or postprocessing of the samples. We show that predeposition substrate condition control facilitates the direct growth of VO 2 ultrathin 15 nm films, exhibiting a resistance change between 3 and 4 decades across the MIT. Our findings indicate that the interface between the film and the substrate is crucial in determining the initial growth layers and the structural evolution. With appropriate substrate surface treatment, the desired VO 2 MIT can be enhanced regardless of the substrate crystallographic orientation. Moreover, we propose a novel approach to obtain large resistance changes across the MIT in ultrathin VO 2 films by incorporating a predeposited 1.5 nm vanadium oxide buffer layer, thereby eliminating the need to use different materials or complex pre- or postprocessing of the samples. Here we also demonstrate that this method improves the transition of 25–50 nm VO 2 thin films on silicon substrates. Our study reveals a simple approach for direct growth of ultrathin VO 2 films exhibiting a significant MIT, which is commonly accepted unattainable over substrates of technological importance, such as sapphire and silicon.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Identification and Distribution of Vanadinite (Pb[subscript 5](V[superscript 5+]O[subscript 4])[subscript 3]Cl) in Lead Pipe Corrosion By-Products

This study presents the first detailed look at vanadium (V) speciation in drinking water pipe corrosion scales. A pool of 34 scale layers from 15 lead or lead-lined pipes representing eight different municipal drinking water distribution systems in the Northeastern and Midwestern portions of the United States were examined. Diverse synchrotron-based techniques, including bulk XANES (X-ray absorption near edge spectroscopy), {mu}-XANES, {mu}-XRD (X-ray diffraction), and {mu}-XRF (X-ray fluorescence) mapping were employed along with traditional powder XRD, SEM-EDXA (scanning electron microscopy-energy dispersive X-ray analysis), and ICP-OES (inductively coupled plasma-optical emission spectrometry) to evaluate vanadium speciation and distribution in these deposits. Vanadinite (Pb{sub 5}(VO{sub 4}){sub 3}Cl) was positively identified, and occurred most frequently in the surface layers. Low V{sub tot} in these waters is likely the limiting factor in the abundance of vanadinite in the pipe scales, along with the existence of divalent lead. The occurrence of V in these samples as a discrete mineral is important because it is formed in the presence of very low concentrations of V in the finished water, it provides a mechanism to concentrate {mu}g{center_dot}L{sup -1} amounts of V from the water to near-percent levels in the pipe scales, and the robustness of V accumulation and release in response to water chemistry changes is likely different than it would be with a sorption accumulation mechanism. Extrapolation from limited existing water chemistry data in this study provides an estimate of {Delta}G{sub f}{sup o} for vanadinite as approximately -3443 kJ{center_dot}mol{sup -1}, or less, leading to a log K{sub s0} value of approximately -86 for the reaction Pb{sub 5}(VO{sub 4}){sub 3}CI{sub (s)}{r_reversible} {l_brace}Pb{sup 2+}{r_brace}{sup 5} + {l_brace}VO{sup 3-}{sub 4}{r_brace}{sup 3} + {l_brace}Cl{sup -}{r_brace}, in which {l_brace}{r_brace} denotes activity.

54 ENVIRONMENTAL SCIENCES↗

Spectroscopic Investigation of the Species Involved in the Rhodium-Catalyzed Oxidative Carbonylation of Toluene to Toluic Acid

A spectroscopic investigation of complexes used to catalyze the oxidative carbonylation of toluene to para-toluic acid was conducted. Rhodium complexes were analyzed by 103Rh and 13C NMR, UV-visible spectroscopy, and infrared spectroscopy. In the presence of vanadium and oxygen, the resting state of the Rh catalyst was found to exist as a Rh(III) complex with carbonyl and trifluoroacetate ligands, consistent with the structure Rh(CO)2(TFA)3. The complex exhibited a carbonyl peak with an unusual degree of shielding, which resulted in the appearance of the carbonyl peak at an unprecedented upfield position in the 13C NMR spectrum. This shielding was caused by interaction of the carbonyl group with the trifluoroacetate ligand. In the absence of oxygen, the Rh(III) complex reduced to Rh(I), and the reduced form exhibited properties resembling the catalyst precursor. Structures and spectroscopic properties calculated using Density Functional Theory were in good agreement with experimental results. The vanadium co-catalyst was similarly characterized by 51V NMR and UV-visible spectroscopy. The oxidized species corresponded to [(VO2)(TFA)]2, whereas the reduced species corresponded (VO)(TFA)2. The spectroscopic results obtained in this study confirm the identity of the species that have been proposed to be involved in the Rh-catalyzed oxidative carbonylation of toluene to toluic acid.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

VO 2 phase change electrodes in Li-ion batteries

Use of electrode materials that show phase change behavior and hence drastic changes in electrochemical activity during operation has not been explored for Li-ion batteries. Here we demonstrate the vanadium oxide (VO 2 ) cathode that undergoes a metal–insulator transition due to the first-order structural phase transition at an accessible temperature of 68 °C for battery operation. Using a suitable electrolyte operable across the phase transition range and compatible with vanadium oxide cathodes, we studied the effect of cathode active material structural changes on lithium insertion followed by the electrochemical characteristics above and below the phase transition temperature. The high-temperature VO 2 phase shows significantly improved capacitance, enhanced current rate capabilities, improved electrical conductivity and lithium-ion diffusivity compared to the insulating low temperature phase. In conclusion, this opens up new avenues for electrode design, allowing manipulation of electrochemical reactions around phase transition temperatures, and in particular enhancing electrochemical properties at elevated temperatures contrary to the existing class of battery chemistries that lead to performance deterioration at elevated temperatures.

25 ENERGY STORAGE↗

Study of the oxidation state and the structural aspects of the V-doped TiO{sub 2}

A modified sol-gel method for synthesizing vanadium doped titania is being reported. These materials were thoroughly characterized for their oxidation states by electron paramagnetic resonance and x-ray absorption near edge structure and the local environment of the V-atom were investigated by the x-ray absorption fine structure. V-doped titania was found to be more active than nanotitania for photo-oxidation of methane in air under ambient conditions using UV-visible irradiation. The vanadium doping in the crystal lattice of titania leads to a mixture of oxidation states of 4+ and 5+ in the crystal lattice sites of the TiO{sub 2}, which is crucial for its catalytic activity.

36 MATERIALS SCIENCE↗

High Rate Plasticity under Pressure using a Windowed Pressure-Shear Impact Experiment

An experimental technique has been developed to study the strength of materials under conditions of moderate pressures and high shear strain rates. The technique is similar to the traditional pressure-shear plate-impact experiments except that window interferometry is used to measure both the normal and transverse particle velocities at a sample-window interface. Experimental and simulation results on vanadium samples backed with a sapphire window show the utility of the technique to measure the flow strength under dynamic loading conditions. The results show that the strength of the vanadium is 600 MPa at a pressure of 4.5 GPa and a plastic strain of 1.7%.

36 MATERIALS SCIENCE↗

Strong stabilization of the Rayleigh-Taylor instability by material strength at megabar pressures

Experimental results showing significant reductions from classical in the Rayleigh-Taylor (RT) instability growth rate due to high pressure effective lattice viscosity in metal foils are presented. Stabilization of RT instability (RTI) by ablation and density gradients has been studied for decades. The regime of stabilized RTI due to material strength at high pressure is new. On the Omega Laser in the Laboratory for Laser Energetics, University of Rochester, target samples of polycrystalline vanadium are compressed and accelerated quasi-isentropically at approx1 Mbar pressures, while maintaining the samples in the solid-state. Provided strong shocks are avoided, the higher the applied peak pressure, the higher the predicted foil strength, and hence, the higher the degree of strength stabilization of RTI. Several experiments were conducted where the amount of RT growth is measured by face-on radiography. The vanadium samples are probed by a laser driven He-alpha x-ray backlighter which produced 5.2 keV radiation. Comparison of the results with constitutive models for solid state strength under these conditions show that the measured RT growth is substantially lower than predictions using existing models that work well at low pressures and long time scales. High pressure, high strain rate data can be explained by the enhanced strength due to a phonon drag mechanism, creating a high effective lattice viscosity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of a short duration backlit pinhole for radiography on the National Ignition Facility

Experiments on the National Ignition Facility (NIF) will require bright, short duration, near-monochromatic x-ray backlighters for radiographic diagnosis of many high-energy density systems. This paper details a vanadium pinhole backlighter producing (1.8{+-}0.5)x10{sup 15} x-ray photons into 4{pi} sr near the vanadium He-like characteristic x-ray energy of 5.18 keV. The x-ray yield was quantified from a set of Ross filters imaged to a calibrated image plate, with the Dante diagnostic used to confirm the quasimonochromatic nature of the spectrum produced. Additionally, an x-ray film image shows a source-limited image resolution of 26 {mu}m from a 20 {mu}m diameter pinhole.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗