Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “utility scale”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Electrochemical hydrogen isotope fractionation - fundamental insights leading to process scale up

Introduction Deuterium and tritium, the two isotopes of hydrogen besides protium, are utilized in many industries. Deuterium is routinely used as a nuclear reactor moderator and molecular labeling agent, while tritium is used as an autoradiography label in medical imaging, and in an emerging market for self-powered lighting for watches, exit signs, firearm night-sights and future fusion fuel. Tritium is produced naturally at very low steady-state levels due to cosmic rays, natural nuclear decay reactions, as well as commercial nuclear fission reactors, and terrestrial nuclear testing conducted primarily in the mid-twentieth century. Tritium often accumulates in the heavy water used in nuclear fission reactors and sometimes appears in groundwater near nuclear reactors due to slight leakage from water sources in the reactor. Because of the health and environmental impacts from tritium leaking into the water sources, as well as the value of this precious material, it is desirable to remove and recover as much tritium as reasonably possible from contaminated water.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Design of Multi-Stage Solvent Extraction Process for Separation of Rare Earth Elements

Flowsheet design and stage determination for the separation of rare earth elements (REEs) using solvent extraction (SX) is a challenging task because of the chemical similarity of the REEs. Low separation factors between the elements and complex equilibrium chemistry provide unique challenges to designing an efficient flowsheet for the separation of elements. The multi-stage nature of the SX process adds further complexity, making the assessment of products for a proposed design and stage combination difficult. Therefore, to develop a SX flowsheet, it is essential to quantify the performance for various design and separation conditions. This paper attempts to address the challenge by utilizing an equilibrium and process modeling approach. Results from a bench-scale study performed on a 10 g/L rare earth salt mixture were used in studying the extraction/stripping behavior and developing equilibrium models. DEHPA with TBP as a phase modifier was used as an extractant, while hydrochloric acid was utilized as a stripping agent. The results obtained were used in developing extraction/stripping models, which were integrated into a process framework of a SX train in a Matlab/Simulink environment. The models were programmed as a function block routine and used for developing a flowsheet, which was simulated for differing separation and design conditions. To identify optimum stage combinations, a particle swarm optimization (PSO) routine was developed and implemented for each SX train. Recovery and purity of elements of interest were used as objective function criteria. The stage combination leading to the minimization of the objective function was used to identify the optimum stage combination for a series of SX trains to attempt a balance of purity and recovery. The models and optimization method were implemented to separate a feed mixture containing REEs, which indicated that 99.52 and 85.41 percent purity is achievable for Yttrium and Lanthanum separation using 8-12-3 and 10-3-5 stage combination for loading, scrubbing, and striping. The model also indicated difficult separability between neodymium, praseodymium, and cerium.

Srivastava, Vaibhav (ORCID:0000000212645987)↗
DOE OSTI2021

The Impact of Behind-the-Meter Heterogeneous Distributed Energy Resources on Distribution Grids

The increasing integration of distributed energy resources (DERs) on the electric grid brings new challenges and opportunities for utility grid operations. With the rapid deployment of DERs, there is emerging interest in integrating these controllable devices with utility operations at all levels for monitoring and management. To understand the challenges with increasing behind-the-meter (BTM) DERs and to identify the needs in deploying advanced controls, a comprehensive grid impact study is indispensable. This paper presents the analysis which help visualize the DER impact on the grid, identify the challenges and provides an insight into the new distribution management and control needs to enable reliable and resilient grid operations.

behind-the-meter↗
DOE OSTI2024

Photovoltaic Analysis and Response Support (PARS) Platform for Solar Situational Awareness and Resiliency Services

The project's primary objective is to develop a digital-twin based Photovoltaic (PV) Analysis and Response Support (PARS) platform, which aims to provide real-time situational awareness and optimal response plans. This platform is designed to enhance the performance of hybrid PV systems, making them competitive with or even superior to conventional generation resources. The PARS platform enabled the project team to develop and evaluate an extensive suite of grid support functionalities for the hybrid PV systems to enhance grid performance, across key areas including visibility, dispatchability, security, resilience, and reliability. Given the global push toward achieving 100% clean energy by 2035, there is a significant increase in the integration of inverter-based resources (IBRs) throughout the energy grid. Effectively managing the inherent variability and uncertainty associated with IBRs is crucial for ensuring cost-effectiveness, reliability, and security in both the main grid and islanded microgrids. Constrained to a limited array of IEEE test systems or standard feeder models, traditional IBR modeling struggles to assimilate new field data, accurately reflect system dynamics, and adapt to the evolving energy landscape. In our project, we embraced a Digital Twin (DT) strategy for crafting the PARS platform. A digital twin acts as a precise virtual counterpart of a physical system, built on historical data and continuously honed with real-time insights. This enables the high-fidelity DT to accurately mirror current system operations and forecast future scenarios. Consequently, the PARS platform becomes an ideal environment for testing and refining monitoring, control, power, and energy management algorithms designed to boost hybrid PV system performance. The defining feature of the PARS platform, distinguishing it from other advanced simulation tools, is its exceptional adaptability. This is achieved by employing actual network topologies and utilizing real-time field data for fine-tuning and calibration, ensuring a close emulation of real-world conditions. The project deliverables include: 1) High-fidelity IBR models and tools for real-time parameterization, utilizing real-time field measurements to refine IBR models for enhanced accuracy and performance; 2) Grid-forming and Grid-following capabilities to deliver resilience services, including blackstart, voltage and frequency support, cold-load pick-up, power reserves, and three-phase load balancing across grid-connected and microgrid settings; 3) Machine learning-based forecasting tools and methods for generating synthetic data and topologies, creating diverse and realistic simulation environments for evaluating varied operational scenarios; 4) Advanced microgrid power and energy management algorithms for optimizing the integration and operation of PV, storage, and demand response resources within both feeder and community scales. The power grid data sets are provided by four utility companies in North Carolina and the New York Power Administration. Acting as industry advisors, our industry partners communicated stakeholder needs and regulatory standards to the research teams, aiding technology transfer by incorporating the developed methodologies into their daily operations. This collaboration ensures that the PARS platform, functioning as a power system digital twin, enhances our understanding of IBR dynamic behaviors and enables the development and evaluation of IBR control functions that match or exceed the capabilities of conventional synchronous generators.

14 SOLAR ENERGY↗
DOE OSTI2025

Decentralized Distributed Proximal Policy Optimization (DD-PPO) for High Performance Computing Scheduling on Multi-User Systems

Resource allocation in High Performance Computing (HPC) environments presents a complex and multifaceted challenge for job scheduling algorithms. Beyond the efficient allocation of system resources, schedulers must account for and optimize multiple performance metrics, including job wait time and system throughput. Traditional heuristic-based scheduling algorithms increasingly struggle and lack the efficiency needed to meet the demands and address the complexity and scale of modern HPC systems. Consequently, recent research efforts have focused on leveraging advancements in Artificial Intelligence (AI) and Deep Learning (DL), particularly Reinforcement Learning (RL), to develop more adaptable and intelligent scheduling strategies. Previous RL-based scheduling approaches have explored a range of algorithms, from Deep Q-Networks (DQN) to Proximal Policy Optimization (PPO), and more recently, hybrid methods that integrate Graph Neural Networks (GNNs) with RL techniques. However, a common limitation across these methods is their reliance on relatively small datasets, with few methods being evaluated using large-scale, multi-million-job trace datasets representative of real-world HPC workloads. Moreover, existing RL schedulers face scalability issues due to centralized policy updates, which hinder training efficiency and performance when applied to large datasets. This study introduces a novel RL-based scheduler utilizing Decentralized Distributed Proximal Policy Optimization (DD-PPO) algorithm, which supports large-scale distributed training across multiple workers without requiring parameter synchronization at every step. By eliminating reliance on centralized updates to a shared policy, the DD-PPO scheduler enhances scalability, training efficiency, and sample utilization. Experimental validation using a large real-world dataset containing over 11.5 million job traces collected from petascale HPC systems over six years assesses the influence of dataset scale on training effectiveness and compares DD-PPO performance to traditional and advanced scheduling approaches. The experimental results demonstrate improved scheduling performance in comparison to both heuristic-based schedulers and existing RL-based scheduling algorithms.

AI↗
DOE OSTI2021

Neuromorphic Computing for Autonomous Racing

Neuromorphic computing has many opportunities in future autonomous systems, especially those that will operate at the edge. However, there are relatively few demonstrations of neuromorphic implementations on real-world applications, partly because of the lack of availability of neuromorphic hardware and software, but also because of the lack of availability of an accessible demonstration platform. In this work, we propose utilizing the F1Tenth platform as an evaluation task for neuromorphic computing. F1Tenth is a competition wherein one tenth scale cars compete in an autonomous racing task; there are significant open source resources in both software and hardware for realizing this task. We present a workflow with neuromorphic hardware, software, and training that can be used to develop a spiking neural network for neuromorphic hardware deployment to perform autonomous racing. We present initial results on utilizing this approach for this small-scale, real-world autonomous vehicle task.

Patton, Robert↗
DOE OSTI2022

Advances in the Application and Utility of Subseasonal-to-Seasonal Predictions

The subseasonal-to-seasonal (S2S) predictive time scale, encompassing lead times ranging from 2 weeks to a season, is at the frontier of forecasting science. Forecasts on this time scale provide opportunities for enhanced application-focused capabilities to complement existing weather and climate services and products. There is, however, a “knowledge–value” gap, where a lack of evidence and awareness of the potential socioeconomic benefits of S2S forecasts limits their wider uptake. To address this gap, here we present the first global community effort at summarizing relevant applications of S2S forecasts to guide further decision-making and support the continued development of S2S forecasts and related services. Focusing on 12 sectoral case studies spanning public health, agriculture, water resource management, renewable energy and utilities, and emergency management and response, we draw on recent advancements to explore their application and utility. These case studies mark a significant step forward in moving from potential to actual S2S forecasting applications. We show that by placing user needs at the forefront of S2S forecast development—demonstrating both skill and utility across sectors—this dialogue can be used to help promote and accelerate the awareness, value, and cogeneration of S2S forecasts. We also highlight that while S2S forecasts are increasingly gaining interest among users, incorporating probabilistic S2S forecasts into existing decision-making operations is not trivial. Nevertheless, S2S forecasting represents a significant opportunity to generate useful, usable, and actionable forecast applications for and with users that will increasingly unlock the potential of this forecasting time scale.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

An Analysis of the Spatial Variations in the Relationship Between Built Environment and Severe Crashes

Traffic crashes significantly contribute to global fatalities, particularly in urban areas, highlighting the need to evaluate the relationship between urban environments and traffic safety. This study extends former spatial modeling frameworks by drawing paths between global models, including spatial lag (SLM), and spatial error (SEM), and local models, including geographically weighted regression (GWR), multi-scale geographically weighted regression (MGWR), and multi-scale geographically weighted regression with spatially lagged dependent variable (MGWRL). Utilizing the proposed framework, this study analyzes severe traffic crashes in relation to urban built environments using various spatial regression models within Leon County, Florida. According to the results, SLM outperforms OLS, SEM, and GWR models. Local models with lagged dependent variables outperform both the global and generic versions of the local models in all performance measures, whereas MGWR and MGWRL outperform GWR and GWRL. Local models performed better than global models, showing spatial non-stationarity; so, the relationship between the dependent and independent variables varies over space. The better performance of models with lagged dependent variables signifies that the spatial distribution of severe crashes is correlated. Finally, the better performance of multi-scale local models than classical local models indicates varying influences of independent variables with different bandwidths. According to the MGWRL model, census block groups close to the urban area with higher population, higher education level, and lower car ownership rates have lower crash rates. On the contrary, motor vehicle percentage for commuting is found to have a negative association with severe crash rate, which suggests the locality of the mentioned associations.

Alisan, Onur (ORCID:0000000193113984)↗
DOE OSTI2023

Data Projection of the High Temperature Electrolysis System in the Dynamic Energy Transport and Integration Laboratory using Dynamic System Scaling

For nuclear power to be flexible in a functioning Integrated Energy System (IES), excess produced heat must be stored or utilized during times of low power demand to ensure a load factor of 1 while load balancing. The Dynamic Energy Transport and Integration Laboratory (DETAIL) is one facility that is under development to emulate IES conditions on the engineering-scale, planned to conduct virtual real time operations with industry-scale facilities, and is currently testing thermal storage and high temperature electrolysis. As part of the study to develop a method to preprocess input signals or postprocess output signals between systems of different scales via Dynamical System Scaling (DSS), the current research is one of the continued efforts branching from the data projection activity conducted for the Thermal Energy Distribution System and currently engages the High Temperature Electrolysis (HTE) System in DETAIL. The HTE SOEC electrical, fluid, and thermal dynamics Figure of Merits (FOM) were identified, governing equations and closure relations were successfully scaled, and relations between FOM scaling ratios were determined. Setting the scaling objectives to reform existing data to project a data set that doubly accelerated the electrolysis process while preserving the produced amount of hydrogen was generated for the full transient. The calculated boundary conditions were inlet temperature, stack current, and inlet steam mass flow rate at 1470 K, 121.1 A, and 1.886 g/s, respectively. The research outcomes demonstrated an output signal postprocessing case accelerating the hydrogen production without changing geometry, number of cells, and partial pressures.

08 HYDROGEN↗
DOE OSTI2024

Improving the Cost-Effectiveness of Algal CO2 Utilization by Synergistic Integration With Power Plant and Wastewater Treatment Operations

Creating an economic demand for carbon utilization products will require lowering the overall cost of the products to compete within the current market. Photosynthetic uptake of carbon dioxide is an emerging pathway for product development in the animal feed market that globally amounts to over 400 Billion USD and is expected to continue growing. This project aims to continue the development of a process that utilizes carbon dioxide while increasing the cost competitiveness of algae as an animal feed product. The overall goal of the project is to demonstrate an engineering-scale open raceway pond algae cultivation system (180 m2) including integration of technologies that utilize coal-fired power plant CO2 and wastewater nutrient inputs. The system is designed to maximize the cost-effectiveness and environmental benefits of algal biomass production for commodity animal feed.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2020

Real-time Electromagnetic Transient Simulation of Multi-Terminal HVDC-AC Grids based on GPU

High-fidelity electromagnetic transient (EMT) simulation plays a critical role in understanding the dynamic behavior and fast transients involved in operation, control, and protection of Multi-Terminal dc (MTdc) grids. Here, this paper proposes a cost-effective high-performance real-time EMT simulation platform for large-scale cross-continental MTdc grids based on graphics processing unit (GPU). The proposed simulation platform: i) assembles detailed EMT models of all components within an MTdc-ac grid into a single platform. This setup provides a complete simulation solution to capture fast transient signals required for high-bandwidth controller design and protection studies without any compromise; ii) implements the first GPU-based simulation architecture and corresponding algorithms for MTdc-ac grids with real-time performance at scales of 1s; iii) is highly-efficient and balances the high utilization of GPU resources and low latency required for the simulation; and iv) outperforms the existing central processing unit (CPU)- or digital signal processor (DSP)/field-programmable gate array (FPGA)-based simulators in terms of its higher scalability on large-scale MTdc-ac grids and superior price-performance ratio on the hardware. Accuracy and performance of the proposed platform are evaluated with respect to the reference results from PSCAD/EMTDC environment.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2023

Non-Empirical and Self-Interaction Corrections for DFTB: Towards Accurate Quantum Simulations for Large Mesoscale Systems (Final Report)

This project was comprised of two complementary (but parallel) thrusts: (1) implementing massively-parallelized computing hardware (with new computational hardware that may replace GPUs) in the density functional tight binding (DFTB) approach and (2) developing new capabilities in DFTB to calculate the electronic structure and dynamics of large chemical systems. While classical molecular dynamics can handle hundreds of thousands of atoms, it cannot provide a first-principles based description of chemical systems at the quantum level. At the other extreme, conventional Kohn-Sham DFT methods can probe the true quantum mechanical nature of chemical systems; however, these methods cannot tackle the large sizes and length scales relevant to dynamics simulations of realistic systems. The DFTB formalism utilized in this project provides a viable approach for probing these large systems at a quantum mechanical level of detail. However, to utilize the DFTB approach for accurate calculations of electronic properties, it is crucial to incorporate quantum-based corrections in DFTB since exchange-correlation effects can still remain very strong in these large systems. At the same time, enhancing the computational efficiency of DFTB is also essential since optimal computational performance is required for addressing the large size scales associated with realistic chemical systems. As such, the new non-empirical corrections and computing hardware enhancements implemented in this project will enable accurate and computationally efficient approaches to directly probe electronic properties in these large, complex systems.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Mechanical properties of zeolite-templated carbons from approximate density functional theory calculations

Zeolite-templated carbon (ZTC) is a unique porous carbonaceous material whose structure is ordered at the nanometre scale, enabling a representative periodic description at the atomistic level. Utilizing an existing, well-defined reference model for ZTCs, a structural library of varying compositions was developed by refinement using density-functional tight-binding (DFTB) potentials parameterized for materials science applications. We first determined the quantum chemical-refined structures of models with CH, CHO, CHON, CHOB, and CHOBN compositions with various degrees of heteroatom substitution. These structural models comprise the characteristic morphological features of highly porous carbon materials, such as open-blade surfaces, edges, saddles, and closed-strut formations, spanning a range of curvatures and characteristic sizes. Second, we carried out alternating compression and expansion of the CHO model unit cell to determine the lowest energy structure as well as to obtain its bulk modulus in order to demonstrate a close connection between macroscopic observations and atomic-scale structures. Further, the agreement between experimental measurements and the computational model is remarkable and demonstrates the power of approximate density functional theory as a cost-effective computational tool with chemical accuracy for the investigation of structure/property relationships in real-world carbon-based solids.

03 NATURAL GAS↗
DOE OSTI2023

Application of Electromagnetic Methods for Reservoir Monitoring with Emphasis on Carbon Capture, Utilization, and Storage

The Controlled-Source ElectroMagnetic (CSEM) method provides crucial information about reservoir fluids and their spatial distribution. Carbon dioxide (CO2) storage, enhanced oil recovery (EOR), geothermal exploration, and lithium exploration are ideal applications for the CSEM method. The versatility of CSEM permits its customization to specific reservoir objectives by selecting the appropriate components of a multi-component system. To effectively tailor the CSEM approach, it is essential to determine whether the primary target reservoir is resistive or conductive. This task is relatively straightforward in CO2 monitoring, where the injected fluid is resistive. However, for scenarios involving brine-saturated (water-wet) or oil-wet (carbon capture, utilization, and storage—CCUS) reservoirs, consideration must also be given to conductive reservoir components. The optimization of data acquisition before the survey involves analyzing target parameters and the sensitivity of multi-component CSEM. This optimization process typically includes on-site noise measurements and 3D anisotropic modeling. Based on our experience, subsequent surveys tend to proceed smoothly, yielding robust measurements that align with scientific objectives. Other critical aspects to be considered are using magnetotelluric (MT) measurements to define the overall background resistivities and integrating real-time quality assurance during data acquisition with 3D modeling. This integration allows the fine tuning of acquisition parameters such as acquisition time and necessary repeats. As a result, data can be examined in real-time to assess subsurface information content while the acquisition is ongoing. Consequently, high-quality data sets are usually obtained for subsequent processing and initial interpretation with minimal user intervention. The implementation of sensitivity analysis during the inversion process plays a pivotal role in ensuring that the acquired data accurately respond to the target reservoirs’ expected depth range. To elucidate these concepts, we present an illustrative example from a CO2 storage site in North Dakota, USA, wherein the long-offset transient electromagnetic method (LOTEM), a variation of the CSEM method, and the MT method were utilized. This example showcases how surface measurements attain appropriately upscaled log-scale sensitivity. Furthermore, the sensitivity of the CSEM and MT methods was examined in other case histories, where the target reservoirs exhibited conductive properties, such as those encountered in enhanced oil recovery (EOR), geothermal, and lithium exploration applications. The same equipment specifications were utilized for CSEM and MT surveys across all case studies.

Barajas-Olalde, César↗
DOE OSTI2022

A Micromorphic Length-Scale Coupling Framework for the Determination of Higher-Order Constitutive Models and the Multi-Scale Simulation of Heterogeneous Materials [Thesis]

Heterogeneous materials and materials with complex microstructures pose a unique challenge in the development of accurate models of their response to external stimuli. These difficulties principally arise due to the difficulty in characterizing and modeling the constituents and their interactions. It is usually possible, though non-trivial, to construct an explicit representation of the microstructure (a direct numeric simulation or DNS) but the method by which the complex modes of deformation and other processes can be homogenized to a reduced-order approximation is frequently unclear. Many homogenization approaches are ad-hoc and lack a strong justification beyond ease of computation. Furthermore, the homogenization approach can, in some cases, not utilize the full breadth of information available in the computation of the macro-scale stresses and deformation measures. It is also noteworthy that homogenization, by its very nature, will tend to obfuscate details of processes occurring at the lower length-scale. It is therefore of interest to include as much information as possible in the construction of the reduced-order model so as to be predictive in a variety of loading environments. We here present a length-scale bridging technique based upon the micromorphic continuum mechanics of Eringen which incorporates volume and surface area averages as a part of its construction. This approach enforces the balance equations at the micro-scale and then studies the effect of the spatially varying nature on the macro-scale. This leads, naturally, to further balance equations which are solved at the macro-scale. This work details a homogenization framework which arises naturally from the micromorphic construction of Eringen attempting to introduce no definitions beyond which are justifiable from micro-structural considerations. One of the results of this effort is the so-called “micromorphic filter” which has been developed and applied to several DNS to demonstrate its effectively. In order to determine the macroscopic degrees of freedom we utilize the special case of an overlap coupling technique where the macro-scale is fully constrained to the micro-scale. This enables us to study the resulting material properties as expected but also allows us to further study the boundary conditions on the additional degrees of freedom at the macro-scale.

42 ENGINEERING↗
DOE OSTI2021

Improving tolerance of yeast to lignocellulosic-derived feedstocks and products

Combined substrate-product toxicity remains one of the main obstacles hampering the scale-up and cost-effectiveness of bioprocesses harnessing lignocellulosic feedstocks, the most abundant, renewable terrestrial resource. Hydrolytic pretreatments release numerous inhibitors impinging on cell viability: the three most acute to yeast S. cerevisiae (the industry dominant biocatalyst) — and universal to all plant sources — are furfural, hydroxymethylfurfural (HMF), and acetic acid. Likewise, desired fermentation products, such as fuel ethanol or commodity organic acids, are toxic to microbes, typically via unknown biological mechanisms. Here, we have engineered both hydrolysate and end-product tolerance in yeast by combining previously-shown alcohol protective modifications with evolved genetic activities targeting the major pretreatment inhibitors. When tested on a wide sampling of genuine lignocellulosic feedstocks, ethanol production increased by >30% on average to titers >100 g/L, achieving parity with clean-sugar equivalents where conditions permit. Furthermore, we designed the tolerance capability to be fully transferable to pre-existing metabolic chassis strains. As such, we “drop-in” hydrolysate competence into one producing lactic acid, demonstrating the first-ever production of a cellulosic plastic at industrial titers. Our advances thus renew the potential of cellulosic biomass utilization for sustainable fuel and non-fuel products at scale.

09 BIOMASS FUELS↗
DOE OSTI2026

Investigation of Causal Relationships of the Cross‐Scale Wave Coupling Through Information Theoretical Approach

On 2015 October 2, MMS spacecraft observed an electron micro-injection event near the southern hemispheric high-altitude cusp, coinciding with intense wave activity across several frequency bands. Here, we investigated the MMS magnetic field and plasma during this event to explore cross-scale coupling among the wave modes. Employing the Hilbert-Huang transform, we perform an empirical mode decomposition to extract frequencies and amplitudes of the intrinsic mode functions (IMFs). In this analysis, we establish both linear and nonlinear relationships and examine the information transfer between the IMFs. Notably, the transfer entropy suggests that high frequency ion cyclotron waves may be driven by the mirror mode structures. Our case study effectively demonstrates the utility of the information theory based tools for studying cross-scale wave coupling phenomena.

Rivera, Elmer C. [Andrews University, Berrien Spri↗
DOE OSTI2020

Lignin-derived electrochemical energy materials and systems

Electrochemical energy storage systems such as supercapacitors, rechargeable batteries and fuel cells have been proven the most effective technologies for energy conversion, storage, and management at different scales. Although a large number of electrochemical energy technologies have been developed in the past and they will continue to be optimized in terms of cost, lifetime, and performance, there is a substantial growing demand for advanced electrochemical energy systems. To deploy these advanced systems, the electrode and electrolyte materials with higher performance, longer life, and lower cost, must be developed. Lignin is the second most abundant natural polymer after cellulose, a byproduct from emerging cellulosic biorefineries, and a waste product from pulp and paper industries. Numerous researches have successfully demonstrated that lignin from different sources can be used as precursors or feedstocks for preparing high-performance electrochemical energy materials and components such as electrodes, electrolytes, membrane separators, and additives. Moreover, techno-economic analyses indicate that it is possible to prepare cost-effective carbons from lignin at engineering scales, compared to current carbon products. These facts suggest that scalable conversion of lignin into high-value energy materials will offer a promising pathway to not only promote the utilization and valorization of lignin but also boost the development of the advanced electrochemical energy systems. This review presents state of the arts of renewable energy materials derived from various lignin and their applications in electrochemical energy systems with emphasis on supercapacitors, rechargeable batteries, and fuel cells. Meanwhile, this article also aims to carve out the critical barriers for lignin-derived high-performance materials for energy applications, intending to identify viable approaches for synthesis of sustainable new energy materials.

09 BIOMASS FUELS↗