Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “transparency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Architectural options and development issues

The design options for the space station are discussed in general terms, reflecting the approach taken by the NASA Concept Development Group. Primary aims are flexibility and transparency, to fulfill as many scientific and commercial user requirements as possible and to open the station to as many new users as possible; utilities, facilities, and functional support must be designed to meet these aims. General architecture options considered include the present STS, an extended STS, a limited-duration manned transportation node with unmanned platforms, and a manned station with unmanned platforms and transportation-node capability (OTV, TMS). The latter option is found most promising and developed further, with consideration of the technical challenges involved.

Powell, L. E.↗
NASA NTRS1983

Energetic closed-cycle gas core reactors for orbit raising

Closed-cycle gas core reactor power plants can be of two types. In the 'mixed flow' type, the gaseous nuclear fuel is intimately mixed with the working gas in the cavity. In the 'light bulb' type the fissioning plasma is enclosed in a transparent tube, and energy transfer to the separate working gas occurs by thermal radiation. The potentials of high temperature gas core reactors in terrestrial electric power generator applications have been considered, and a number of civilian power-beaming applications for gaseous fuel nuclear-MHD power plants in space have been suggested. Major conclusions of investigations related to the design of space power systems are discussed. Attention is given to options for conversion cycles, the power system specific mass, and research and technology issues.

Rosa, R. J.↗
NASA NTRS1984

The structural response of a rail acceleration

The transient response of a 0.4 by 0.6 cm rectangular bore rail accelerator was analyzed by a three dimensional finite element code. The copper rail deflected to a peak value of 0.08 mm in compression and then oscillated at an amplitude of 0.02 mm. Simultaneously the insulating side wall of glass fabric base, epoxy resin laminate (G-10) was compressed to a peak value of 0.13 mm and rebounded to a steady state in extension. Projectile pinch or blowby due to the rail extension or compression, respectively, can be identified by examining the time history of the rail displacement. The effect of blowby was most significant at the side wall characterized by mm size displacement in compression. Dynamic stress calculations indicate that the G-10 supporting material behind the rail is subjected to over 21 MPa at which the G-10 could fail if the laminate was not carefully oriented. Results for a polycarbonate resin (Lexan) side wall show much larger displacements and stresses than for G-10. The tradeoff between the transparency of Lexan and the mechanical strength of G-10 for sidewall material is obvious. Displacement calculations from the modal method are smaller than the results from the direct integration method by almost an order of magnitude, because the high frequency effect is neglected. Previously announced in STAR as N83-35412

Wang, S. Y.↗
NASA NTRS1984

Variable X-ray absorption in the QSO MR 2251 - 178

The monitoring proportional counter of the Einstein Observatory has been used to observe the QSO MR 2251 - 178 on two occasions, approximately 1 year apart, in the 2-10 keV range. Evidence is found for an increase in the absorbing column density by a large factor over the 1 year interval. Simultaneous measurements with the high resolution imager are used to further constrain the soft X-ray flux and to show that the highly absorbed spectrum must have excess emission below 1 keV. A model is presented in which photoionization by the X-ray continuum ionizes a cloud or shell of material, so that the emergent spectrum is transparent below the K-edge of O VII at 739 eV, but is highly absorbed above this energy.

Halpern, J. P.↗
NASA NTRS1984

Highly photoconducting O2-doped CdS films deposited by spray pyrolysis

CdS films have been prepared by spraying in air solutions of thiourea with either cadmium chloride or cadmium acetate with varying mole ratio and substrate temperature, and subsequently heat treating in oxygen. Substrates included both bare glass or sapphire and transparent conducting oxide-coated sapphire for electrical measurements lateral and transverse to the CdS plane, respectively. Dark resistances of over 10 to the 14th ohms and light-to-dark conductivities of up to 10 to the 7th were obtained using uncoated substrates. The use of Cd(C2H3O2)2 in place of CdCl2 greatly increased the speed of response although with some sacrifice in photoconductivity. Deposition of CdS on ITO-coated surfaces led to greatly reduced dark resistances for the case of CdCl2, but not Cd(C2H3O2)2, presumably due to HCl reaction with the ITO coating in the course of spraying with the former. Ion microprobe analysis detected indium within the CdS films exhibiting low dark resistance. Measurements of the dark and light conductivities at temperatures down to 77 K are given as are the response times for unetched and HCl-etched surfaces.

Richards, D.↗
NASA NTRS1983

Gels and gel-derived glasses in the system Na2O-B2O3-SiO2

The containerless melting of high-purity multicomponent homogeneous gels and gel monoliths offers a unique approach to making ultrapure multicomponent optical glasses in the reduced gravity environment of space. Procedures for preparing and characterizing gels and gel-derived glasses in the system Na2O-B2O3-SiO2 are described. Preparation is based on the polymerization reactions of alkoxysilane with trimethyl borate or boric acid and a suitable sodium compound. The chemistry of the gelling process is discussed in terms of process parameters and the gel compositions. The physicochemical nature of gels prepared by three different procedures was found to be significantly different. Infrared absorption spectra indicate finite differences in the molecular structures of the different gels. The melting of the gel powders and the transformation of porous gel monoliths to transparent 'glass' without melting are described.

Mukherjee, S. P.↗
NASA NTRS1984

Rainbow schlieren and its applications

In this modification of the schlieren apparatus the knife-edge is replaced by a radial-rainbow filter with a transparent center and opaque surround. Consequently, refractive-index inhomogeneities in the test section appear varicolored, whereas uniformities appear white. The rainbow schlieren is simple, is easy to use, and accentuates detail regarding inhomogeneities more than the ordinary schlieren. The rainbow schlieren permits quantitative evaluation of certain refractive-index distributions, including turbulence, by simple calculations from observations of hue rather than irradiance.

Howes, W. L.↗
NASA NTRS1984

AgGaS2 infrared parametric oscillator

A report is presented of the first operation of an optical parametric oscillator in a chalcopyrite crystal, AgGaS2. Tuning from 1.4 to 4.0 microns is demonstrated for 1.06-micron Nd:yttrium aluminum garnet pumping. The potential tuning range extends to the 12-micron transparency limit of the crystal.

Fan, Y. X.↗
NASA NTRS1985

High-Output Injection Laser

Terraced double-heterojunction large optical cavity laser features high output in single optical mode. Semiconductor laser consists of body of single-crystal semiconductor material, typically composed of Group III to V compounds in form of rectangular parallelepiped. One of laser end faces partially transparent so that light may be emitted from it. Lateral thickness variation of active and guide layers in semiconductor laser produces confinement of propagating laser beam in lateral direction.

Connolly, J. C.↗
NASA NTRS1986

Ultrasonic Mixing of Epoxy Curing Agents

New ultrasonic mixing technique used to mix several curing agents/epoxy combinations. Major component of commercially available base epoxy resin used in tetraglycidylmethylenedianiline (TGMDA). In ultrasonic mixing system cup holds resin and curing agent during acoustic excitation. Samples placed in cup with top to ultrasonic horn forming bottom of cup. Ultrasonically treated until amber colored and transparent. Because ultrasonic agitation drives out entrapped air, degassing not necessary before cure.

Hodges, W. T.↗
NASA NTRS1984

Ion thruster performance model

A model of ion thruster performance is developed for high flux density, cusped magnetic field thruster designs. This model is formulated in terms of the average energy required to produce an ion in the discharge chamber plasma and the fraction of these ions that are extracted to form the beam. The direct loss of high energy (primary) electrons from the plasma to the anode is shown to have a major effect on thruster performance. The model provides simple algebraic equations enabling one to calculate the beam ion energy cost, the average discharge chamber plasma ion energy cost, the primary electron density, the primary-to-Maxwellian electron density ratio and the Maxwellian electron temperature. Experiments indicate that the model correctly predicts the variation in plasma ion energy cost for changes in propellant gas (Ar, Kr and Xe), grid transparency to neutral atoms, beam extraction area, discharge voltage, and discharge chamber wall temperature. The model and experiments indicate that thruster performance may be described in terms of only four thruster configuration dependent parameters and two operating parameters. The model also suggests that improved performance should be exhibited by thruster designs which extract a large fraction of the ions produced in the discharge chamber, which have good primary electron and neutral atom containment and which operate at high propellant flow rates.

Brophy, J. R.↗
NASA NTRS1984

Investigation of Cloud Feedback in the GLAS Model

The theoretical and observational studies of cirrus clouds were reviewed to provide information for more realistic treatments of cirrus in the general circulation models. Based on the review, one time-step and ten-day model simulations were conducted to investigate the differences in the longwave radiation flux between the black and transparent cirrus treatment in the infrared. For both experiments substantial difference in the outgoing longwave flux at the top of the atmosphere is found. For the ten-day simulations, the differences in the convective, supersaturation and total cloudiness, temperature, and sensible and latent heat fluxes are also examined on various temporal and spatial scales. Although the cause-and-effect is difficult to identify, the results clearly suggest that on the time scale of a few days and longer cloud-radiation interactions play an important role. Sensitivity study of the longwave radiation flux to different longwave radiation parameterizations was performed by comparing the calculated fluxes between the Wu-Kaplan's scheme used in the present GLAS model and the Wang's schemes for climate studies.

Wang, W. C.↗
NASA NTRS1984

Stresses in pin-loaded orthotropic plates using photoelasticity

The stresses in transparent glass-epoxy plates loaded by a steel pin through a hole were determined by photoelasticity. The stresses around the hole edge, across the net section, along the shear out line, and on the centerline below the hole for quasiisotropic, unidirectional, and angle ply plates are outlined. Stresses in an isotropic comparison specimen are also presented. Stress concentration factors for several locations around the plates are tabulated. The experimental apparatus and the experimental technique are discussed. The isochromatic and isoclinic fringe patterns for the four plates are shown. A description of the necessary photoelastic theory is appended.

Hyer, M. W.↗
NASA NTRS1984

Antisoiling technology: Theories of surface soiling and performance of antisoiling surface coatings

Physical examination of surfaces undergoing natural outdoor soiling suggests that soil matter accumulates in up to three distinct layers. The first layer involves strong chemical attachment or strong chemisorption of soil matter on the primary surface. The second layer is physical, consisting of a highly organized arrangement of soil creating a gradation in surface energy from a high associated with the energetic first layer to the lowest possible state on the outer surfce of the second layer. The lowest possible energy state is dictated by the physical nature of the regional atmospheric soiling materials. These first two layers are resistant to removal by rain. The third layer constitutes a settling of loose soil matter, accumulating in dry periods and being removed during rainy periods. Theories and evidence suggest that surfaces that should be naturally resistant to the formation of the first two-resistant layers should be hard, smooth, hydrophobic, free of first-period elements, and have the lowest possible surface energy. These characteristics, evolving as requirements for low-soiling surfaces, suggest that surfaces or surface coatings should be of fluorocarbon chemistry. Evidence for the three-soil-layer concept, and data on the positive performance of candidate fluorocarbon coatings on glass and transparent plastic films after 28 months of outdoor exposure, are presented.

Cuddihy, E. F.↗
NASA NTRS1984

High frequency plasma generator for ion thrusters

The results of a program to experimentally develop two new types of plasma generators for 30 cm electrostatic argon ion thrusters are presented. The two plasma generating methods selected for this study were by radio frequency induction (RFI), operating at an input power frequency of 1 MHz, and by electron cyclotron heating (ECH) at an operating frequency of 5.0 GHz. Both of these generators utilize multiline cusp permanent magnet configurations for plasma confinement and beam profile optimization. The program goals were to develop a plasma generator possessing the characteristics of high electrical efficiency (low eV/ion) and simplicity of operation while maintaining the reliability and durability of the conventional hollow cathode plasma sources. The RFI plasma generator has achieved minimum discharge losses of 120 eV/ion while the ECH generator has obtained 145 eV/ion, assuming a 90% ion optical transparency of the electrostatic acceleration system. Details of experimental tests with a variety of magnet configurations are presented.

Goede, H.↗
NASA NTRS1984

The Ground Based Photometric Limitations to the Search for Light Variations Due to 5-minute Solar-type Oscillations in Other Stars

High speed photometric observations obtained with a single channel photometer on the South African Astronomical Observatory 0.5-m and 1.9-m telescopes are presented. It is argued that the dominant source of noise at periods near 5 minutes is sky transparency variation rather than scintillation. For bright stars this means that, at this period, increased telescope aperture does not improve photometric accuracy. It is claimed that ground based photometric observations cannot reach accuracies sufficient to study solar-type oscillations in other stars. Such observations must be made from space. Recommendations for improving ground based observations are made.

Kurtz, D. W.↗