Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “transient detection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

A Search for Short-Period Accreting Pulsars with BATSE

Accreting X-ray pulsar systems can be detected and monitored by the BATSE Pulsar Monitor at full sensitivity only above the Nyquist period of 2.048 s, since it uses the DISCLA data type. Systems with shorter periods than 2 s can be observed, but with a reduced sensitivity, since only the aliased power is measured. While persistent sources in the period range below that have been found by earlier spacecraft, transient systems may still be undiscovered, due to limited time coverage of the galactic plane with all-sky instruments. BATSE data with a time resolution of 31 ms (PSR single-sweep mode) has been collected for four energy channels spanning 20-50 keV , at scheduled times for particular detectors and detector combinations which view the galactic plane. The data spans Nov 1993 to present, with a typical exposure of 15000 s per day to approximately 1/8 of the plane. An accelerated FFT-based search is in progress on these data. Data are segmented into approximately 300 second intervals, barycentered for 3 possible source directions spaced by 30 degrees about the detector normal, with the time series accelerated for each of 15 steps, each spaced by 5 x 10(exp -5). To avoid loss of coherence due to system orbital velocities, FFTs are averaged over each 1/4 day interval separately. Results of this search are presented, including examples of detection of Her X-1, Cen X-3, and other pulsars.

Wilson, R. B.↗

Dynamic Model Agnostic Reliability Evaluation of Machine-Learning Models Integrated in Instrumentation & Control Systems

In recent years, the field of data-driven neural network-based machine learning (ML) algorithms has grown significantly and spurred research in its applicability to instrumentation and control systems. While they are promising in operational contexts, the trustworthiness of such algorithms is not adequately assessed. Failures of ML-integrated systems are poorly understood; the lack of comprehensive risk modeling can degrade the trustworthiness of these systems. In recent reports by the National Institute for Standards and Technology, trustworthiness in ML is a critical barrier to adoption and will play a vital role in intelligent systems' safe and accountable operation. Thus, in this work, we demonstrate a real-time model-agnostic method to evaluate the relative reliability of ML predictions by incorporating out-of-distribution detection on the training dataset. It is well documented that ML algorithms excel at interpolation (or near-interpolation) tasks but significantly degrade at extrapolation. This occurs when new samples are "far" from training samples. The method, referred to as the Laplacian distributed decay for reliability (LADDR), determines the difference between the operational and training datasets, which is used to calculate a prediction's relative reliability. LADDR is demonstrated on a feedforward neural network-based model used to predict safety significant factors during different loss-of-flow transients. LADDR is intended as a "data supervisor" and determines the appropriateness of well-trained ML models in the context of operational conditions. Ultimately, LADDR illustrates how training data can be used as evidence to support the trustworthiness of ML predictions when utilized for conventional interpolation tasks.

97 MATHEMATICS AND COMPUTING↗

Sub-Diurnal Methane Variations on Mars Driven by Barometric Pumping and Planetary Boundary Layer Evolution

In recent years, the Tunable Laser Spectrometer within the Sample Analysis at Mars (TLS-SAM) instrument on board the Mars Science Laboratory (MSL) Curiosity rover has detected methane variations in the atmosphere at Gale crater. Methane concentrations appear to fluctuate seasonally as well as sub-diurnally, which is difficult to reconcile with an as-yet-unknown transport mechanism delivering the gas from underground to the atmosphere. To potentially explain the fluctuations, we consider barometrically induced transport of methane from an underground source to the surface, modulated by temperature-dependent adsorption. The subsurface fractured-rock seepage model is coupled to a simplified 1-D atmospheric mixing model to provide insights on the pattern of atmospheric methane concentrations in response to transient surface methane emissions, as well as to predict sub-diurnal variation in methane abundance for the northern summer period, which is a candidate time frame for a MSL Curiosity sampling campaign. Our analysis suggests that there is a lower limit to the subsurface fracture density that can produce the observed methane patterns, below which the atmospheric methane variations would be out of phase with the observations. The best-performing model scenarios indicate a significant, short-lived methane pulse just prior to sunrise, the detection of which by TLS-SAM would be a potential indicator of the contribution of barometric pumping to Mars' atmospheric methane variations.

54 ENVIRONMENTAL SCIENCES↗

Deep level defects in low-pressure chemical vapor deposition grown (010) β-Ga 2 O 3

This study provides the full-bandgap evaluation of defect state distributions in beta phase gallium oxide (β-Ga 2 O 3 ) grown by low-pressure chemical vapor deposition (LPCVD) on (010) β-Ga 2 O 3 substrates at high growth of up to 20 µm/h. Deep-level optical spectroscopy and deep-level transient spectroscopy measurements applied to Ni/β-Ga 2 O 3 Schottky diodes revealed the presence of a previously unreported defect state at E C -3.6 eV, which dominated the overall trap distribution in LPCVD grown material. However, states at E C -0.8 eV, E C -2.0 eV, and E C -4.4. eV were also detected, similar to prior studies on β-Ga 2 O 3 grown by other methods, with similar or lower concentrations for the LPCVD samples. The E C -0.8 eV and E C -2.0 eV states were previously connected to residual Fe impurities and gallium vacancies, respectively. The total concentration of traps in the LPCVD material was on par with or lower than the state-of-the-art metal–organic chemical vapor deposition-grown materials despite the much higher growth rate, and the distribution of states showed negligible dependence on SiCl 4 flow rate and doping concentration. These results demonstrate that the high growth rate of LPCVD-grown β-Ga 2 O 3 is very promising for achieving thick, low defect density, and high-quality layers needed for multi-kV device applications.

36 MATERIALS SCIENCE↗

FORTE Measurements of Global Lightning Altitudes

While multiple lightning detection systems provide geographical locations of lightning events across the globe, robust lightning altitude measurements on a global scale have proven elusive. Space-based platforms have an advantageous viewing geometry for making these measurements, but prior studies with the Fast On-orbit Recording of Transient Events (FORTE) satellite were limited to a few thousand events. In this study, we apply the same technique for calculating source altitude from the previous efforts to a large catalog of hundreds of thousands of global FORTE in-cloud lightning events that were coincident with flashes geolocated by its lightning imager between 1997 and 2003. We use this new data set to document global variations in lightning altitude. As in previous studies, we find that FORTE primarily resolves sources from the upper (positive) charge layer at ~11 km altitude in normal thunderstorms. However, sources are also recorded from other charge layers in the storm and from leaders developing between layers. In particular, we note a pronounced increase in source altitude in the first 20 ms of FORTE flashes from the negative leader developing upward into the upper positive charge layer. Regions known for wintertime and/or stratiform lightning have increased contributions from low-altitude sources, while tropical regions particularly around Panama and the Maritime Continent have the greatest concentrations of high-altitude sources.

54 ENVIRONMENTAL SCIENCES↗

Detection of Thermal Emission at Millimeter Wavelengths from Low-Earth Orbit Satellites

The detection of satellite thermal emission at millimeter wavelengths is presented using data from the 3rd-Generation receiver on the South Pole Telescope (SPT-3G). This represents the first reported detection of thermal emission from artificial satellites at millimeter wavelengths. Satellite thermal emission is shown to be detectable at high signal-to-noise on timescales as short as a few tens of milliseconds. An algorithm for downloading orbital information and tracking known satellites given observer constraints and time-ordered observatory pointing is described. Consequences for cosmological surveys and short-duration transient searches are discussed, revealing that the integrated thermal emission from all large satellites does not contribute significantly to the SPT-3G survey intensity map. Measured satellite positions are found to be discrepant from their two-line element (TLE) derived ephemerides up to several arcminutes which may present a difficulty in cross-checking or masking satellites from short-duration transient searches.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Experimental Resonance Enhanced Multiphoton Ionization (REMPI) studies of small molecules

Resonance enhanced multiphoton ionization (REMPI) utilizes tunable dye lasers to ionize an atom or molecule by first preparing an excited state by multiphoton absorption and then ionizing that state before it can decay. This process is highly selective with respect to both the initial and resonant intermediate states of the target, and it can be extremely sensitive. In addition, the products of the REMPI process can be detected as needed by analyzing the resulting electrons, ions, fluorescence, or by additional REMPI. This points to a number of exciting opportunities for both basic and applied science. On the applied side, REMPI has great potential as an ultrasensitive, highly selective detector for trace, reactive, or transient species. On the basic side, REMPI affords an unprecedented means of exploring excited state physics and chemistry at the quantum-state-specific level. An overview of current studies of excited molecular states is given to illustrate the principles and prospects of REMPI.

Dehmer, J. L.↗

TRMM-Based Lightning Climatology

Gridded climatologies of total lightning flash rates seen by the spaceborne Optical Transient Detector (OTD) and Lightning Imaging Sensor (LIS) have been updated. OTD collected data from May 1995 to March 2000. LIS data (equatorward of about 38 deg) has been added for 1998-2010. Flash counts from each instrument are scaled by the best available estimates of detection efficiency. The long LIS record makes the merged climatology most robust in the tropics and subtropics, while the high latitude data is entirely from OTD. The mean global flash rate from the merged climatology is 46 flashes per second. The peak annual flash rate at 0.5 deg scale is 160 fl/square km/yr in eastern Congo. The peak monthly average flash rate at 2.5 scale is 18 fl/square km/mo, from early April to early May in the Brahmaputra Valley of far eastern India. Lightning decreases in this region during the monsoon season, but increases further north and west. A monthly average peak from early August to early September in northern Pakistan also exceeds any monthly averages from Africa, despite central Africa having the greatest yearly average. Most continental regions away from the equator have an annual cycle with lightning flash rates peaking in late spring or summer. The main exceptions are India and southeast Asia, with springtime peaks in April and May. For landmasses near the equator, flash rates peak near the equinoxes. For many oceanic regions, the peak flash rates occur in autumn. This is particularly noticeable for the Mediterranean and North Atlantic. Landmasses have a strong diurnal cycle of lightning, with flash rates generally peaking between 3-5 pm local solar time. The central United States flash rates peak later, in late evening or early night. Flash rates peak after midnight in northern Argentina. These regions are known for large, intense, long-lived mesoscale convective systems.

Cecil, Daniel J.↗

Diagnosing Meteorological Conditions Associated with Sprites and Lightning with Large Charge Moment Changes (CMC) over Oklahoma

Sprites are a category of Transient Luminous Events (TLEs) that occur in the upper atmosphere above the tops of Mesoscale Convective Systems (MCSs). They are commonly associated with lightning that produce large charge moment changes (CMCs). Synergistic use of satellite and radar‐retrieved observations together with sounding data, forecasts, and lightning‐detection networks allowed the diagnosis and analysis of the meteorological conditions associated with sprites as well as large‐CMC lightning over Oklahoma.

Flores-Rivera, Lizxandra↗

The Curious Case of ASASSN-20hx: A Slowly Evolving, UV- and X-Ray-Luminous, Ambiguous Nuclear Transient

Abstract We present observations of ASASSN-20hx, a nearby ambiguous nuclear transient (ANT) discovered in NGC 6297 by the All-Sky Automated Survey for Supernovae (ASAS-SN). We observed ASASSN-20hx from −30 to 275 days relative to the peak UV/optical emission using high-cadence, multiwavelength spectroscopy and photometry. From Transiting Exoplanet Survey Satellite data, we determine that the ANT began to brighten on 2020 June 22.8 with a linear rise in flux for at least the first week. ASASSN-20hx peaked in the UV/optical 30 days later on 2020 July 22.8 (MJD = 59052.8) at a bolometric luminosity of L = (3.15 ± 0.04) × 10 43 erg s −1 . The subsequent decline is slower than any TDE observed to date and consistent with many other ANTs. Compared to an archival X-ray detection, the X-ray luminosity of ASASSN-20hx increased by an order of magnitude to L x ∼ 1.5 × 10 42 erg s −1 and then slowly declined over time. The X-ray emission is well fit by a power law with a photon index of Γ ∼ 2.3–2.6. Both the optical and near-infrared spectra of ASASSN-20hx lack emission lines, unusual for any known class of nuclear transient. While ASASSN-20hx has some characteristics seen in both tidal disruption events and active galactic nuclei, it cannot be definitively classified with current data.

79 ASTRONOMY AND ASTROPHYSICS↗

Detection of radon emission at the edges of lunar maria with the Apollo alpha-particle spectrometer

The distribution of radioactive polonium-210, a decay product of radon-222, shows enhanced concentrations at the edges of lunar maria. Enhancements are seen at the edges of Mare Fecunditatis, Mare Crisium, Mare Smythii, Mare Tranquillitatis, Mare Nubium, Mare Cognitum, and Oceanus Procellarum. The observation is indicative of the transient emission of radon gas from the perimeters of lunar maria.

Gorenstein, P.↗

Constraints on gamma-ray bursters from soft X-ray transients

The Columbia Astrophysics Laboratory's Einstein imaging proportional counter database has been searched for possible X-ray counterparts to gamma ray bursts. The limiting sensitivity was about 10 to the 10th erg/sq cm with a total exposure of about 3 x 10 to the 6th s divided among about 1000 1 deg x 1 deg fields. Four events with a pointlike spatial distribution were detected but their extremely soft spectra makes them unlikely candidates for gamma ray burst counterparts. The results are used to place limits on the X-ray and gamma ray luminosity ratio and log(number)N-log(flux)S relation for gamma ray bursts. The constraints placed on models for their origin are commented on.

Helfand, D. J.↗

Reprocessing Microflare Data

The report concerns work on detecting and cataloging solar microflares using an automated. An accompanying figure represents the solar microflare distribution during the period of April 1991 to November 1992, the height of solar activity after the launch of CGRO. It also shows the distribution extending below the distribution obtained at GSFC by manual means. We have implemented significant refinements in the search algorithm. The algorithm in its simplest form searches for transient events and based upon the distribution of the signal among the different BATSE detectors, we can assign it to be of solar origin if the signal distribution conforms to what one expects from a burst or transient from that direction. One of the major problems in an earlier effort was to search for microflares and large flares simultaneously. The requirement for a dynamic range of almost 10(exp 4) resulted in ambiguous identifications at the low side of the distribution. We have since restricted the search to events with peak count rates under 2000/s. Larger events are easily identified in the manual search, so we have chosen not to duplicate that work. The second problem was that missing counts existed below channel 0 in the BATSE Large Area Detector (LAD) data. These have been recovered and are now included in the search process. This provides data below 20 keV, and as we get closer to the thermal part of the spectrum, it provides greater sensitivity. The third problem was that too many BATSE detectors were used in the search. Detectors with pointing directions far from the Sun, although detecting the event, had poorly known responses. Detectors greater than approximately 60 degrees off the Sun are no longer included in the search process. By reducing the systematic errors with the large off-axis detectors we can conduct more rigorous statistical tests of a candidate event to ascertain whether it originated from the solar direction. We have reprocessed the period in the early mission that covers solar maximum and constructed the microflare distribution shown in the figure. The results of the automated search start to deviate from the manual search results below about 1000/s. Not only do we now have this distribution but we have a database of solar microflares that was used to construct the distribution. This database contains the signal at higher energy channels as well as that in channel zero (and below). From this one can, using software at GSFC, construct a photon spectrum for some of the larger microflares. It can also be used in other solar studies, especially those that correlate the X-ray flux with emission at other wavelengths. With some additional effort we hope to integrate this database into the corresponding one residing at the Solar Data Analysis Center at GSFC. The entire CGRO mission's data can now be reprocessed to obtain the microflare distribution at all phases of the solar cycle. This work is in progress. The results of this work will be presented in forthcoming scientific workshops and conferences.

Ryan, James M.↗

Sensitized Near-Infrared Emission of SiGe Nanocrystals via Heterostructuring with Quasi Two-Dimensional Perovskite

The near-infrared (NIR) emission of silicon–germanium alloy nanocrystals (SiGe NCs) was sensitized by heterostructuring with a quasi two-dimensional (Q-2D) perovskite (CsPbBr 3 blended with butylammonium bromide (BABr)). Colloidal SiGe NCs were synthesized by using a nonthermal plasma method with chloride precursors. As-synthesized SiGe NCs showed no detectable photoluminescence (PL). Embedding the SiGe NCs within the perovskite matrix via spin coating led to a heterostructure exhibiting dual emissions: green emission at 520 nm from the perovskite and NIR emission at 1035 nm from the SiGe NCs. Time-integrated and resolved PL measurements and transient absorption spectroscopy revealed energy transfer from the perovskite to the SiGe NCs, which sensitized the NIR emission from the SiGe NCs and quenched the green PL for the perovskite. These results demonstrate that Ge alloying can effectively tune the bandgap of Si NCs and highlight the feasibility of heterostructuring perovskites and photoluminescent NCs to enhance or activate their PL. In conclusion, this approach broadens their potential applications in the NIR region.

36 MATERIALS SCIENCE↗

Energy Level Gradients from Surface to Bulk in Hybrid Metal-Halide Perovskite Thin Films

Variations in local strain, defect densities, and composition of hybrid metal-halide perovskites have been reported to create heterogeneous energy landscapes in thin films, which impact charge-carrier diffusion and recombination dynamics. Here, we employ one- and two-photon transient absorption spectroscopy to selectively probe the dynamics of charge carriers from surface and bulk regions of methylammonium lead bromide thin films. Differences in the transient absorption spectra indicate that an energy gradient of approximately 100 meV is formed between the higher band-gap surface and lower band-gap bulk regions. Thus, during their lifetime, photoexcited carriers move away from the surface to recombine in the bulk, where our experiments detect long-lived charge populations despite the significant band splitting that has conventionally been assumed to inhibit efficient radiative recombination. Supported by first-principles calculations, we demonstrate that bright emission can still arise from the bulk with states that occupy a wide range of momenta in the vicinity of the band extrema, which show strong dipole transitions. Our results report that photoexcitations in the hybrid perovskites avoid defect-rich surface regions, and that particularly strong emission is generated from accumulated excitation populations in the bulk. Published by the American Physical Society 2024

Bourelle, Sean A.↗

Ge:Be infrared photoconductors

Ge:Be photoconductors were optimized for the 30 to 50 micron wavelength range. Crystal growth of detector quality material requires good control of both the Be and residual impurity doping. Detective quantum efficiencies of n sub d = 46% at 5 A/W were achieved at a photon background of 10 to the 8th power p/s. The responsivity of Ge:Be detectors can be strongly temperature-dependent when the residual shallow levels in the material are closely compensated. Transient responses on the order of approximately 1 second were observed in some materials. The role of residual shallow impurities on the performance of photoconductors doped with semi-deep and deep impurities is discussed.

Haegel, N. M.↗

Tunable diode laser absorption sensor for temperature and velocity measurements of O2 in air flows

A fast and nonintrusive velocity and temperature diagnostic based on oxygen absorption is presented. The system uses a GaAlAs tunable diode laser, ramped and modulated in wavelength at high frequency. Detection is performed at twice the modulating frequency, leading to second harmonic absorption lineshapes. Velocity is inferred from the wavelength shift of the absorption line center due to the Doppler effect. Temperature is determined by comparing experimental and calculated lineshapes. Capabilities of the technique for studies of transient high-speed flows are demonstrated in shock tube experiments. Good agreement is obtained with predicted temperatures and velocities when pressure-induced shifts are accounted for.

Philippe, L. C.↗

Transient periodicities in X-ray-active red dwarfs - First results from Mount Cuba and interpretation with an oscillating loop model

Results from a program at the Mount Cuba Astronomical Observatory to optically monitor transient periodicities in flare stars are reported. The data are analyzed for periodicities by means of a modified autocorrelation approach. A randomization technique is used to assess the statistical significance of periods. In AD Leonis, variability with amplitude 0.4 percent and a period of 4.1 min was detected during one run on March 6, 1991: the probability that this periodicity is due to chance is 10 exp -5. Further observations obtained on AD Leo within 1-2 hr on the same night showed no significant variability (0.01). It is shown that optical periodicities of the sort detected may be interpreted as arising from oscillations in coronal loops.

Mullan, D. J.↗