Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “topic modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Are Fullerenes Relevant to Cosmochemistry? A New Finding

The abundances of noble gases found in primitive, carbonaceous meteorites are unexpected when compared with our Sun. Known as Q-gases (Q for some unknown carrier dubbed quintessence ), this anomaly has remained a mystery since it was discovered in 1975. Q-gases are characterized by increasing depletions with decreasing atomic number (Z) relative to solar noble gases and normalized to 132Xe (Figure 1). This Q-gas mass fractionation is unexplained, and its investigation is important to understanding the origin of the solar system. However, the subject is fraught with controversy, in part due to the complex nature of Q and in part due to claims of some researchers that cannot be reproduced by other investigators. The topic is discussed in numerous places [e.g., 1-4], with models of Q falling into two basic categories, both involving carbon entrapment of noble gases. First (Group A), there is the conservative two-dimensional view that Q-gases are adsorbed or sorbed onto a "labyrinth" of graphite or carbon grains [5-9], or they undergo active capture onto growing surfaces [6]. Second (Group B), there is the view holding to the remarkable property of carbon discovered in 1985. Carbon can curl up into closed geometries of hexagon- and pentagon-shaped carbon-ring configurations, a property ignored completely by Group A. Group B thinks of Q as a three-dimensional structure of endohedral carbon cages like fullerenes, carbon onions, or some class of carbon nanotubes [3, 4, 10]. Group B does not exclude Group A effects.

Wilson, T. L.↗

Modelling Cosmic-Ray Effects in the Protosolar Disk

The role that Galactic cosmic rays (GCRs) and solar energetic particles (SEPs) play in the dynamic evolution of protosolar disks and the origin of our Solar System is a fundamental one. The GCRs are an important component of the interstellar medium (ISM), and even play a role in correcting the age determinations of some irons versus CAIs (calcium-aluminum inclusions) in meteoroids . Because CRs also are one of the energy transport mechanisms in a planetary nebula, the question of modelling their effect upon this broad subject is a serious topic for planetary science. The problem is addressed here.

Wilson, Thomas L.↗

Sensor-Web Operations Explorer

Understanding the atmospheric state and its impact on air quality requires observations of trace gases, aerosols, clouds, and physical parameters across temporal and spatial scales that range from minutes to days and from meters to more than 10,000 kilometers. Observations include continuous local monitoring for particle formation; field campaigns for emissions, local transport, and chemistry; and periodic global measurements for continental transport and chemistry. Understanding includes global data assimilation framework capable of hierarchical coupling, dynamic integration of chemical data and atmospheric models, and feedback loops between models and observations. The objective of the sensor-web system is to observe trace gases, aerosols, clouds, and physical parameters, an integrated observation infrastructure composed of space-borne, air-borne, and in-situ sensors will be simulated based on their measurement physics properties. The objective of the sensor-web operation is to optimally plan for heterogeneous multiple sensors, the sampling strategies will be explored and science impact will be analyzed based on comprehensive modeling of atmospheric phenomena including convection, transport, and chemical process. Topics include system architecture, software architecture, hardware architecture, process flow, technology infusion, challenges, and future direction.

observation↗

Aerothermodynamics of Blunt Body Entry Vehicles

In this chapter, the aerothermodynamic phenomena of blunt body entry vehicles are discussed. Four topics will be considered that present challenges to current computational modeling techniques for blunt body environments: turbulent flow, non-equilibrium flow, rarefied flow, and radiation transport. Examples of comparisons between computational tools to ground and flight-test data will be presented in order to illustrate the challenges existing in the numerical modeling of each of these phenomena and to provide test cases for evaluation of Computational Fluid Dynamics (CFD) code predictions.

Hollis, Brian R.↗

Practical Aspects of the Frequency Domain Approach for Aircraft System Identification

Practical aspects of the frequency-domain approach for aircraft system identification are explained and demonstrated. Topics related to experiment design, flight data analysis, and dynamic modeling are included. For demonstration purposes, simulated time series data and simulated flight data from an F-16 nonlinear simulation with realistic noise are used. This approach enables detailed evaluations of the techniques and results, because the true characteristics of the data and aircraft dynamics are known for the simulated data. Analytical techniques and practical considerations are examined for the finite Fourier transform, nonparametric frequency response estimation, parametric modeling in the frequency domain, experiment design for frequency-domain modeling, data analysis and modeling in the frequency domain, and real-time calculations. Flight data from a subscale jet transport aircraft are used to demonstrate some of the techniques and technical issues.

Morelli, Eugene A.↗

Some algorithms for polygons on a sphere.

A limited search for polygon algorithms for use in a new military training simulation that interfaces with several others produced only planar algorithms. To avoid having to implement several different sophisticated map projections to guarantee compatibility with all the other simulations, we opted to develop algorithms that work directly on a sphere. The first is an algorithm to compute the area of a polygon whose edges are segments of great circles. Since our model represents certain object locations as mathematical points, the second topic is whether a specified point is inside a specified polygon. Possibly pathological cases are identified and eliminated. When we realized that most political boundaries are actually rhumb lines, use of the Mercator projection equations seemed unavoidable. We then reasoned that if all the edges were short enough, lat-lon lines, great circle segments, and rhumb lines would be close enough to being identical that we could use whichever was most convenient. Thence, we looked at the relationship between the maximum distances between great circle segments and rhumb lines and between lat-lon lines and rhumb lines as functions of length, azimuth, and latitude. The final algorithm finds the area overlapped by two polygons. Again, potentially pathological cases are identified and eliminated.

Duquette, William H.↗

Launch Vehicle and Spacecraft Transmitter Electromagnetic Compatibility

The Launch Services Program at NASA’s Kennedy Space Center (KSC) is the primary gate for acquiring commercial vehicles to provide a cost effective ride to space for NASA spacecraft. With the lunar Gateway, more human tended elements are planned for launch. One challenge facing the space industry is the proliferation of communication and science transmitters at frequencies beyond the qualification of space avionics and instruments. Studies have ensued to examine the intricacies of performing radiated susceptibility testing and analysis above 18 GHz. Changes in the launch vehicle communications interface to the range have also lead to new launch vehicle antenna systems and more reliance on GPS and telemetry systems. Finally, research initiated at KSC in the area of predicted electric field distributions in launch vehicle payload fairings have spawned Small Business Technology Transfer initiatives for industry to investigate statistical algorithm and computational improvements in large payload fairing modeling of transmitters at frequencies in the GHz range. These topics, along with electromagnetic compatibility testing for launch vehicles will be discussed.

Electromagnetic Testing Cavity Statistics↗

Hypervelocity Impact Characterization on Hubble Space Telescope Multi-Layer Insulation

Multi-layer insulation (MLI) is a common material used on rocket bodies and spacecraft to provide thermal regulation. This material is typically attached on the surface of the object in orbit and is thus exposed to the space environment and to micrometeoroid and orbital debris (MMOD) impacts. Occasionally, these exposed surfaces are returned and used by NASA’s Orbital Debris Program Office (ODPO) for analysis. When used to assess impacts on surfaces over time, materials like MLI provide an opportunity for in situ measurements to support the Orbital Debris Engineering Model (ORDEM) development and validation. During the 2009 Hubble Space Telescope (HST) Serving Mission, the MLI blankets covering the HST electronics bays 5, 8, and 10 were removed and subsequently analyzed by the ODPO in 2010. The bay 5 blanket was used in concert with ground-based hypervelocity impact tests on single layer MLI to validate the ORDEM 3.1 computer model of the OD environment, but further research was required to properly differentiate the impact features attributed to MM or OD. The ORDEM 3.1 validation effort identified several areas of further study to improve model validation and understanding of the space environment. Among these topics are the effects of underlying MLI layers on first layer impact feature characteristics, the effects of space weathering and associated damage to the surface on impact feature characteristics, and the transition from perforating to cratering regions. To better understand hypervelocity impact damage and long-term degradation of MLI surfaces, further hypervelocity impact testing was proposed and completed from 2020 to 2022. This paper discusses test conditions and parameters with resultant impact hole analyses of single layer versus multi-layered samples, space-exposed samples versus pristine, equivalent samples, and perforation versus cratering criteria in the difficult transition region. Damage equations, with associated uncertainties, are estimated from the test parameters and presented. The results of a feasibility study are described, in which the Scanning Electron Microscopy/Electron Dispersive X-ray was used to examine the MLI layers to differentiate MM and OD impacts. Finally, the extension of HST MLI outcomes and analysis methodology as it applies to future returned MLI samples is discussed.

Melissa A. Murray↗

Hypervelocity Impact Characterization on Hubble Space Telescope Multi-Layer Insulation

Multi-layer insulation (MLI) is a common material used on rocket bodies and spacecraft to provide thermal regulation. This material is typically attached on the surface of the object in orbit and is thus exposed to the space environment and to micrometeoroid and orbital debris (MMOD) impacts. Occasionally, these exposed surfaces are returned and used by NASA’s Orbital Debris Program Office (ODPO) for analysis. When used to assess impacts on surfaces over time, materials like MLI provide an opportunity for in-situ measurements to support the Orbital Debris Engineering Model (ORDEM) development and validation. During the 2009 Hubble Space Telescope (HST) Serving Mission, the MLI blankets covering the HST electronics bays 5, 8, and 10 were removed and subsequently analyzed by the ODPO in 2010. The bay 5 blanket was used in concert with ground-based hypervelocity impact tests on single layer MLI to validate the ORDEM 3.1 computer model of the OD environment, but further research was required to properly differentiate the impact features attributed to MM or OD. The ORDEM 3.1 validation effort identified several areas of further study to improve model validation and understanding of the space environment. Among these topics are the effects of underlying MLI layers on first layer impact feature characteristics, the effects of space weathering and associated damage to the surface on impact feature characteristics, and the transition from perforating to cratering regions. To better understand hypervelocity impact damage and long-term degradation of MLI surfaces, further hypervelocity impact testing was proposed and completed from 2020 to 2022. This paper discusses test conditions and parameters with resultant impact hole analyses of single layer versus multi-layered samples, space-exposed samples versus pristine, equivalent samples, and perforation versus cratering criteria in the difficult transition region. Damage equations, with associated uncertainties, are estimated from the test parameters and presented. The results of a feasibility study are described, in which the scanning electron microscopy/electron dispersive x-ray was used to examine the MLI layers to differentiate MM and OD impacts. Finally, the extension of HST MLI outcomes and analysis methodology as it applies to future returned MLI samples is discussed.

Melissa A Murray↗

Wind Turbine Optimization with WISDEM

This presentation for the Fourth Wind Energy Systems Engineering Workshop explains the NREL wind energy systems engineering initiative-developed analysis platform and research capability to capture important system interactions to achieve a better understanding of how to improve system-level performance and achieve system-level cost reductions. Topics include Wind-Plant Integrated System Design and Engineering Model (WISDEM) and multidisciplinary design analysis and optimization.

17 WIND ENERGY↗

Microburst model requirements for flight simulation: An airframe manufacturer's perspective

A brief outline is given of topics for presentation and discussion at the workshop. As manufacturers and certifiers of transport airplanes and associated on-board systems, an interest in the prevention of wind shear related accidents and incidents is inherent. The near term objectives are to provide the customers technical support in the areas of training as well as to research existing and potentially improved on-board systems. In the future, many improved systems should be implemented. This will require certification as well as further educational activity in the use of these new systems. A set of wind models is needed for design work which characterize a wide variety of real microbursts as measured during the JAWS project. The wind models should be limited in both size and complexity to just those features which degrade aircraft performance.

Schoenman, Richard L.↗

Circadian rhythms of performance: new trends

This brief review is concerned with how human performance efficiency changes as a function of time of day. It presents an overview of some of the research paradigms and conceptual models that have been used to investigate circadian performance rhythms. The influence of homeostatic and circadian processes on performance regulation is discussed. The review also briefly presents recent mathematical models of alertness that have been used to predict cognitive performance. Related topics such as interindividual differences and the postlunch dip are presented.

Review, Tutorial↗

Low-Temperature Oxidation of Methanol to Formaldehyde on a Model Single-Atom Catalyst: Pd Atoms on Fe 3 O 4 (001)

Single atom catalysis has been a topic of increasing interest due to the potential for improved selectivity, reactivity, and catalyst cost. However, single atom catalysts are still difficult to characterize under realistic reaction conditions, leading to controversy regarding the capabilities of single atoms and a need for model studies. Herein, we examine the reaction of methanol on single Pd atoms supported on Fe 3 O 4 (001) under ultra-high vacuum conditions. On clean Fe 3 O 4 (001) a small fraction of methanol is converted to formaldehyde through a methoxy intermediate at 516 K. The addition of single Pd atoms lowers the barrier to C-H bond cleavage by a factor of two, resulting in formaldehyde desorption by 290 K. Furthermore, Pd atoms sinter by 300 K in the presence of methanol, and Pd clusters do not exhibit the same chemistry. Single atom sites significantly lower the barrier to the oxidation of methanol, although their stability remains an issue.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Integrated Technology Rotor Methodology Assessment Workshop

The conference proceedings contains 14 formal papers and the results of two panel discussions. In addition, a transcript of discussion that followed the paper presentations and panels is included. The papers are of two kinds. The first seven papers were directed specifically to the correlation of industry and government mathematical models with data for rotorcraft stability from six experiments. The remaining 7 papers dealt with related topics in the prediction of rotor aeroelastic or aeromechanical stability. The first of the panels provided an evaluation of the correlation that was shown between the mathematical models and the experimental data. The second panel addressed the general problems of the validation of mathematical models.

Mcnulty, Michael J.↗

Software engineering and the role of Ada: Executive seminar

The objective was to introduce the basic terminology and concepts of software engineering and Ada. The life cycle model is reviewed. The application of the goals and principles of software engineering is applied. An introductory understanding of the features of the Ada language is gained. Topics addressed include: the software crises; the mandate of the Space Station Program; software life cycle model; software engineering; and Ada under the software engineering umbrella.

Freedman, Glenn B.↗

Health impact assessment – A survey on quantifying tools

Integrating human health into prospective impact assessments is known to be challenging. This is true for both approaches: dedicated health impact assessments (HIA) as well as inclusion of health into more general impact assessments. Acknowledging the full range of participatory, qualitative, and quantitative approaches, this study focuses on the latter, especially on computational tools for quantitative health modelling. We conducted a survey among tool developers concerning the status quo of development and availability of such tools; experiences made with model usage in real-life situations; and priorities for further development. Responding toolmaker groups described 17 such tools, most of them being maintained and reported as ready for use and covering a wide range of topics, including risk & protective factors, exposures, policies, and health outcomes. In recent years, existing models have been improved and were applied in new ways, and completely new models emerged. There was high agreement among respondents on the need to further develop methods for assessment of inequalities and uncertainty. The contribution of quantitative modeling to health foresight would benefit from building joint strategies of further tool development, improving the visibility of quantitative tools and methods, and engaging continuously with actual and potential users. - Highlights: • A survey investigated computational tools for health impact quantification. • Formal evaluation of such tools has been rare. • Handling inequalities and uncertainties are priority areas for further development. • Health foresight would benefit from tool developers and users forming a community. • Joint development strategies across computational tools are needed.

54 ENVIRONMENTAL SCIENCES↗

cerf: A Python package to evaluate the feasibility and costs of power plant siting for alternative futures

Long-term electric power sector planning and capacity expansion is a key area of interest to stakeholders across a wide range of organizations because it helps in making informed decisions about investments in infrastructure within the context of potential future vulnerabilities under various natural and human stressors. Future power plant siting costs will depend on a number of factors including the characteristics of the electricity capacity expansion and electricity demand (e.g., fuel mix of future electric power capacity, and the magnitude and geographic distribution of electricity demand growth) as well as the geographic location of power plants. Electricity technology capacity expansion plans modeled to represent alternate future conditions meeting a set of scenario assumptions are traditionally compared against historical trends which may not be consistent with current and future conditions. We present the `cerf` Python package (a.k.a., the Capacity Expansion Regional Feasibility model) which helps evaluate the feasibility and structure of future, scenario-driven electricity capacity expansion plans by siting power plants in areas that have been deemed the least cost option while considering dynamic future conditions. We can use `cerf` to gain insight to research topics such as: 1) under what conditions future projected electricity expansion plans from models such as GCAM-USA are possible to achieve, 2) where and which on-the-ground barriers to siting (e.g., protected areas, cooling water availability) may influence our ability to achieve certain expansions, and 3) how electricity infrastructure build-outs and value may evolve into the future when considering locational marginal pricing (LMP) based on the supply and demand of electricity from a grid operations model.

20 FOSSIL-FUELED POWER PLANTS↗

Inference of ICF Implosion Core Mix using Experimental Data and Theoretical Mix Modeling

The mixing between fuel and shell materials in Inertial Confinement Fusion (ICF) implosion cores is a current topic of interest. The goal of this work was to design direct-drive ICF experiments which have varying levels of mix, and subsequently to extract information on mixing directly from the experimental data using spectroscopic techniques. The experimental design was accomplished using hydrodynamic simulations in conjunction with Haan's saturation model, which was used to predict the mix levels of candidate experimental configurations. These theoretical predictions were then compared to the mixing information which was extracted from the experimental data, and it was found that Haan's mix model performed well in predicting trends in the width of the mix layer. With these results, we have contributed to an assessment of the range of validity and predictive capability of the Haan saturation model, as well as increased our confidence in the methods used to extract mixing information from experimental data.

42 ENGINEERING↗