Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “timing system”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Density limits as disruption forecasters for spherical tokamaks

Fusion power output from spherical tokamaks would benefit from increased confined plasma density, but there exists a limit on the density before confinement is lost and the plasma current is disrupted. This density limit has long been characterized by a simple, global Greenwald limit proportional to the plasma current and inversely proportional to the cross sectional area of the plasma. It is shown that in the database of discharges from the National Spherical Tokamak Experiment (NSTX) and Mega Ampere Spherical Tokamak (MAST) spherical tokamaks, the likelihood of disruption does increase above the Greenwald limit, and especially in the plasma current rampdown phase. The physics of the density limit has been recently theoretically explored through local criteria. Several of these are tested using the disruption event characterization and forecasting (DECAF TM ) code for their potential effectiveness as disruption warning signals. For a limited set of NSTX discharges, a local island power balance criteria was found to be less reliable, presently, than the Greenwald limit. For this work, an empirical critical edge line density and a boundary turbulent transport limit were both tested for MAST-U, which has an electron density profile measurement with high spatial resolution in the outer part of the plasma. Both were found to have similar dependencies on key plasma parameters. In a limited set of MAST-U discharges that appear to disrupt due to rising density at values under the Greenwald limit, crossing of the boundary turbulent transport limit occurred close to the time of disruption. Finally, these limits were evaluated for their potential use in real-time, and it was found that with the necessary real-time inputs and with refinement through further testing, these limits could be implemented in a real-time disruption forecasting system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Static actuator-sharing algorithm for concurrent control of multiple plasma properties

Simultaneous regulation of multiple properties in next-generation tokamaks like ITER and fusion pilot plant may require the integration of different plasma control algorithms. Such integration requires the conversion of individual controller commands into physical actuator requests while accounting for the coupling between different plasma properties. This work proposes a tokamak and scenario-agnostic actuator-sharing algorithm (ASA) to perform the above-mentioned command-request conversion and, hence, integrate multiple plasma controllers. The proposed algorithm implicitly solves a quadratic programming (QP) problem formulated to account for the saturation limits and the relation between the controller commands and physical actuator requests. Since the constraints arising in the QP program are linear, the proposed ASA is highly computationally efficient and can be implemented in the tokamak plasma control system in real time. Furthermore, the proposed algorithm is designed to handle real-time changes in the control objectives and actuators’ availability. Nonlinear simulations carried out using the Control Oriented Transport SIMulator illustrate the effectiveness of the proposed algorithm in achieving multiple control objectives simultaneously.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Direct real photons in relativistic heavy ion collisions

Direct real photons are arguably the most versatile tools to study relativistic heavy ion collisions. They are produced, by various mechanisms, during the entire space-time history of the strongly interacting system. Also, being colorless, most the time they escape without further interaction, i.e. they are penetrating probes. This makes them rich in information, but hard to decypher and interpret. This review presents the experimental and theoretical developments related to direct real photons since the 1970s, with a special emphasis on the recently emerged 'direct photon puzzle', the simultaneous presence of large yields and strong azimuthal asymmetries of photons in heavy ion collisions, an observation that so far eluded full and coherent explanation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Reconstruction of tokamak plasma safety factor profile using deep learning

Abstract The motional Stark effect (MSE) diagnostic has been a standard measurement for the magnetic field line pitch angle in tokamaks that are equipped with neutral beams. However, the MSE data are not always available due to experimental constraints, especially in future devices without neutral beams. Here we develop a deep-learning based model (SGTC-QR) that can reconstruct the safety factor profile without the MSE diagnostic to mimic the traditional equilibrium reconstruction with the MSE constraint. The model demonstrates promising performance, and the sub-millisecond inference time is compatible with the real-time plasma control system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Overview of Wendelstein 7-X high-performance operation

The Wendelstein 7-X (W7-X) stellarator has completed two consecutive experimental campaigns OP 2.2 (Sep.-Dec. 2024) and OP 2.3 (Feb.-May 2025) under a new operational strategy enabling more than one year of uninterrupted device availability. This approach, supported by exceptionally high subsystem reliability, allowed sustained high-efficiency plasma operations with up to 80–100 discharges per day across a broad range of magnetic configurations. Several key technical upgrades-most notably the first operation of a 1.5 MW class steady-state gyrotron, a new steady-state pellet injector, and advanced real-time feedback control systems significantly enhanced heating, fueling, and plasma control capabilities. Together, these improvements enabled major advances in long-pulse performance, high-β operation, and confinement optimization. Long-pulse discharges achieved 1.8 GJ of injected energy under fully detached divertor conditions, while reduced-field scenarios facilitated record volume-averaged β values approaching 3%. High-performance plasmas with centrally peaked density profiles, created via neutral beam injection (NBI) or sustained pellet fueling, demonstrated strongly reduced turbulent transport and stellarator-record fusion triple products. Complementary studies of power exhaust and divertor heat loads revealed the role of scrape-off-layer drift physics in shaping strike-line patterns under attached conditions. Together, the results from OP 2.2 and OP 2.3 significantly expand the operational space of W7-X and strengthen its role as a leading platform for steady-state stellarator research and reactor-relevant plasma scenarios.

Wendelstein 7-X↗
DOE OSTI2021

Experimental 3-dimensional tracking of the dynamics of a single electron in the Fermilab Integrable Optics Test Accelerator (IOTA)

We present the results of experimental studies on the transverse and longitudinal dynamics of a single electron in the IOTA storage ring. IOTA is a flexible machine dedicated to beam physics experiments with electrons and protons. A method was developed to reliably inject and circulate a controlled number of electrons in the ring. A key beam diagnostic system is the set of sensitive high-resolution digital cameras for the detection of synchrotron light emitted by the electrons. With 60–130 electrons in the machine, we measured beam lifetime and derived an absolute calibration of the optical system. At exposure times of 0.5 s, the cameras were sensitive to individual electrons. Camera images were used to reconstruct the time evolution of oscillation amplitudes of a single electron in all 3 degrees of freedom. The evolution of amplitudes directly showed the interplay between synchrotron-radiation damping, quantum excitations, and scattering with the residual gas. From the distribution of measured single-electron oscillation amplitudes, we deduced transverse emittances, momentum spread, damping times, and beam energy. Estimates of residual-gas density and composition were calculated from the measured distributions of vertical scattering angles. Combining scattering and lifetime data, we also provide an estimate of the aperture of the ring. To our knowledge, this is the first time that the dynamics of a single electron are tracked in all three dimensions with digital cameras in a storage ring.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

Towards real-time monitoring: data assimilated time-lapse full waveform inversion for seismic velocity and uncertainty estimation

SUMMARY Rapid development of time-lapse seismic monitoring instrumentations has made it possible to collect dense time-lapse data for tomographically retrieving time-lapse (even continuous) images of subsurface changes. While traditional time-lapse full waveform inversion (TLFWI) algorithms are designed for sparse time-lapse surveys, they lack of effective temporal constraint on time-lapse data, and, more importantly, lack of the uncertainty estimation of the TLFWI results that is critical for further interpretation. Here, we propose a new data assimilation TLFWI method, using hierarchical matrix powered extended Kalman filter (HiEKF) to quantify the image uncertainty. Compared to existing Kalman filter algorithms, HiEKF allows to store and update a data-sparse representation of the cross-covariance matrices and propagate model errors without expensive operations involving covariance matrices. Hence, HiEKF is computationally efficient and applicable to 3-D TLFWI problems. Then, we reformulate TLFWI in the framework of HiEKF (termed hereafter as TLFWI-HiEKF) to predict time-lapse images of subsurface spatiotemporal velocity changes and simultaneously quantify the uncertainty of the inverted velocity changes over time. We demonstrate the validity and applicability of TLFWI–HiEKF with two realistic CO2 monitoring models derived from Frio-II and Cranfield CO2 injection sites, respectively. In both 2-D and 3-D examples, the inverted high-resolution time-lapse velocity results clearly reveal a continuous velocity reduction due to the injection of CO2. Moreover, the accuracy of the model is increasing over time by assimilating more time-lapse data while the standard deviation is decreasing over lapsed time. We expect TLFWI-HiEKF to be equipped with real-time seismic monitoring systems for continuously imaging the distribution of subsurface gas and fluids in the future large-scale CO2 sequestration experiments and reservoir management.

58 GEOSCIENCES↗
DOE OSTI2020

New H2O–H2O collisional rate coefficients for cometary applications

ABSTRACT We re-introduce a semiclassical methodology based on theories developed for the determination of broadening coefficients. We show that this simple and extremely fast methodology provides results that are in good agreement with results obtained using the more sophisticate MQCT approach. This semiclassical methodology could be an alternative approach which allows to provide large sets of collisional data for very complex molecular systems. It saves time both on the determination of potential energy surfaces and on the collisional dynamical calculations. In addition, this paper provides more complete sets of rotational de-excitation cross-sections and rate coefficients of H2O perturbed by a thermal average of water molecules. Those data can be used in the radiative transfer modelling of cometary atmospheres.

Boursier, C.↗
DOE OSTI2024

Dynamical instability in multi-orbiter systems with gas friction

ABSTRACT Closely packed multiplanet systems are known to experience dynamical instability if the spacings between the planets are too small. Such instability can be tempered by the frictional forces acting on the planets from gaseous discs. A similar situation applies to stellar-mass black holes embedded in active galactic nuclei discs around supermassive black holes. We use N-body integrations to evaluate how the frictional damping of orbital eccentricity affects the growth of dynamical instability for a wide range of K (the difference in the planetary semimajor axes in units of the mutual Hill radius) and (unequal) planet masses. We find that, in general, the stable region (large K) and unstable region (small K) are separated by a “grey zone”, where the (in)stability is not guaranteed. We report the numerical values of the critical spacing for stability Kcrit and the “grey zone” range in different systems, and provide fitting formulae for arbitrary frictional forcing strength. We show that the stability of a system depends on the damping time-scale τ relative to the zero-friction instability growth time-scale tinst: two-planet systems are stable if tinst ≳ τ; three-planet systems require tinst ≳ 10τ−100τ. When K is sufficiently small, tinst can be less than the synodic period between the planets, which makes frictional stabilization unlikely to occur. As K increases, tinst tends to grow exponentially, but can also fluctuate by a few orders of magnitude. We also devise a linear map to analyse the dynamical instability of the “planet + test mass” system, and find qualitative agreement with N-body simulations.

Li, Jiaru (ORCID:0000000155507421)↗
DOE OSTI2025

Statistical estimates of the binary properties of rotational variables

ABSTRACT We present a model to estimate the average primary masses, companion mass ranges, the inclination limit for recognizing a rotational variable, and the primary mass spreads for populations of binary stars. The model fits a population’s binary mass function distribution and allows for a probability that some mass functions are incorrectly estimated. Using tests with synthetic data, we assess the model’s sensitivity to each parameter, finding that we are most sensitive to the average primary mass and the minimum companion mass, with less sensitivity to the inclination limit and little to no sensitivity to the primary mass spread. We apply the model to five populations of binary spotted rotational variables identified in ASAS-SN, computing their binary mass functions using RV data from APOGEE. Their average primary mass estimates are consistent with our expectations based on their CMD locations ($\sim 0.75 \, {\rm M}_{\odot }$ for lower main sequence primaries and $\sim 0.9$–$1.2 \, {\rm M}_{\odot }$ for RS CVn and sub-subgiants). Their companion mass range estimates allow companion masses down to $M_2/M_1\simeq 0.1$, although the main sequence population may have a higher minimum mass fraction ($\sim 0.4$). We see weak evidence of an inclination limit $\gtrsim 50^{\circ }$ for the main sequence and sub-subgiant groups and no evidence of an inclination limit in the other groups. No groups show strong evidence for a preferred primary mass spread. We conclude by demonstrating that the approach will provide significantly better estimates of the primary mass and the minimum mass ratio and reasonable sensitivity to the inclination limit with 10 times as many systems.

Phillips, Anya (ORCID:000900051914974X)↗
DOE OSTI2026

Identified charged hadron production in Au+Au collisions at $\sqrt{s_{NN}}$ = 54.4 GeV with the STAR detector

Here, we present results on the production of 𝜋±, 𝐾±, 𝑝, and $\bar{𝑝}$ in Au+Au collisions at $\sqrt{𝑠_{N⁢N}}$ = 54.4~GeV using the STAR detector at RHIC, at mid-rapidity (|𝑦|< 0.1). Invariant yields of these particles as a function of transverse momentum are shown. We determine bulk properties such as integrated particle yields (𝑑 ⁢𝑁 /𝑑 ⁢𝑦 ), mean transverse momentum (⟨𝑝 𝑇 ⟩), particle ratios, which provide insight into the particle production mechanisms. Additionally, the kinetic freeze-out parameters (𝑇 kin and ⟨𝛽 𝑇 ⟩), which provide information about the dynamics of the system at the time of freeze-out, are obtained. The Bjorken energy density (𝜖 𝐵⁢𝐽 ), which gives an estimate of the energy density in the central rapidity region of the collision zone at the formation time 𝜏, is calculated and presented as a function of multiplicity for various energies. The results are compared with those from the models such as A Multi-Phase Transport (AMPT) and Heavy Ion Jet INteraction Generator (HIJING) for further insights.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Microscopic predictions for the production of neutron-rich nuclei in the reaction Yb 176 + Yb 176

Background: Production of neutron-rich nuclei is of vital importance to both understanding nuclear structure far from stability and to informing astrophysical models of the rapid neutron capture process (r-process). Multinucleon transfer (MNT) in heavy-ion collisions offers a possibility to produce neutron-rich nuclei far from stability. Purpose: The 176 Yb + 176 Yb reaction has been suggested as a potential candidate to explore the neutron-rich region surrounding the principal fragments. The current study has been conducted with the goal of providing guidance for future experiments wishing to study this (or similar) system. Methods: Time-dependent Hartree-Fock (TDHF) and its time-dependent random-phase approximation (TDRPA) extension are used to examine both scattering and MNT characteristics in 176 Yb + 176 Yb. TDRPA calculations are performed to compute fluctuations and correlations of the neutron and proton numbers, allowing for estimates of primary fragment production probabilities. Results: Both scattering results from TDHF and transfer results from the TDRPA are presented for different energies, orvientations, and impact parameters. In addition to fragment composition, scattering angles and total kinetic energies, as well as correlations between these observables are presented. Conclusions: 176 Yb + 176 Yb appears to be an interesting probe for the midmass neutron-rich region of the chart of nuclides. Lastly, the predictions of both TDHF and TDRPA are speculative, and will benefit from future experimental results to test the validity of this approach to studying MNT in heavy, symmetric collisions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Giant Nonreciprocity and Gyration through Modulation-Induced Hatano-Nelson Coupling in Integrated Photonics

Asymmetric energy exchange interactions, also known as Hatano-Nelson type couplings, enable the study of non-Hermitian physics and associated phenomena like the non-Hermitian skin effect and exceptional points (EPs). Since these interactions are by definition nonreciprocal, there have been very few options for implementations in integrated photonics. Here, in this work, we show that asymmetric couplings are readily achievable in integrated photonic systems through time-domain dynamic modulation. We experimentally study this concept using a two-resonator photonic molecule produced in a lithium niobate on insulator platform that is electro-optically modulated by rf stimuli. We demonstrate the dynamic tuning of the Hatano-Nelson coupling between the resonators, surpassing the asymmetry that has been achieved in previous work, to reach an EP for the first time. We are additionally able to flip the relative sign of the couplings for opposite directions by going past the EP. Using this capability, we show that the through-chain transport can be configured to exhibit both giant (~60 dB) optical contrast as well as photonic gyration or nonreciprocal π phase contrast.

42 ENGINEERING↗
DOE OSTI2021

Novel Health Assessment Techniques for a Modern Power Distribution System

Distribution systems are large and complex systems that grow over time. When contingencies occur dispatchers, engineers, and executives need to know the answer to the question, "How bad is it?", in order to make timely and meaningful decisions. Therefore, a scalable method to add context to system conditions is needed. In this paper we present novel deviation-based techniques which enable scaled bus voltage and line power measurement deviations to quickly assess local and global health, and lend context to the severity of contingencies. The proposed techniques are demonstrated using simulations of line-to-line, line-to-ground, and three-phases-to-ground fault conditions on an IEEE 33-bus distribution model.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2022

Robust Event Classification Using Imperfect Real-world PMU Data

Here, this paper studies robust event classification using imperfect real-world phasor measurement unit (PMU) data. By analyzing the real-world PMU data, we find it is challenging to directly use this dataset for event classifiers due to the low data quality observed in PMU measurements and event logs. To address these challenges, we develop a novel machine learning framework for training robust event classifiers, which consists of three main steps: data preprocessing, fine-grained event data extraction, and feature engineering. Specifically, the data preprocessing step addresses the data quality issues of PMU measurements (e.g., bad data and missing data); in the fine-grained event data extraction step, a model-free event detection method is developed to accurately localize the events from the inaccurate event timestamps in the event logs; and the feature engineering step constructs the event features based on the patterns of different event types, in order to improve the performance and the interpretability of the event classifiers. Based on the proposed framework, we develop a workflow for event classification using the real-world PMU data streaming into the system in real time. Using the proposed framework, robust event classifiers can be efficiently trained based on many off-the-shelf lightweight machine learning models. Numerical experiments using the real-world dataset from the Western Interconnection of the U.S power transmission grid show that the event classifiers trained under the proposed framework can achieve high classification accuracy while being robust against low-quality data.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗
DOE OSTI2021

Dual-Wavelength Time-Resolved Photoluminescence Study of CdSe x Te 1-x Surface Passivation via Mg y Zn 1-y O and Al 2 O 3

Voltage loss is currently one of the biggest challenges facing cadmium telluride (CdTe) based photovoltaics. Determining the location(s) of major voltage loss within the device stack (e.g., front/back interface, grain boundaries) is therefore of primary interest. Here, we present a custom-built time-resolved photoluminescence system with two excitation wavelengths - 670 (standard) and 405 nm - to probe the device stack at depths of approximately 130 and 35 nm, respectively; their comparison helps differentiate interface and bulk contributions to carrier lifetime. We apply this system to examine the passivation effect of two significant recent advances in CdTe: the incorporation of Se to form graded CdSe x Te 1-x and the replacement of CdS with Mg y Zn 1-y O. It is found that x = 0.2 Se is required to obtain lifetime improvements, primarily in the bulk. Additionally, evidence for trapping at the Mg y Zn 1-y O/CdSe x Te 1-x interface was observed. Furthermore, this indicates further work is required to sufficiently passivate the front interface.

CdSeTe↗
DOE OSTI2025

Postearthquake Damage Mapping via Remote Sensing: Lessons From the 2023 Türkiye Disaster

This review addresses the urgent need for scalable, accurate, and reproducible remote sensing solutions following the February 2023 Türkiye earthquakes. It synthesizes the contributions of five peer-reviewed studies published in the IEEE JSTARS Special Issue on postearthquake damage and risk assessment. These studies cover areas such as damage classification with deep learning, fusion of multisource remote sensing data, creation of benchmark datasets, detailed damage mapping, and analysis of geophysical signals using outgoing longwave radiation. The article summarizes the methodological approaches and the practical relevance of the reviewed studies for detecting, evaluating, and quantifying damage, and outlines key challenges, including model generalization, class ambiguity, and data integration. It also discusses emerging trends, including explainable artificial intelligence, multimodal data fusion, and open-data platforms. This synthesis provides a foundation for building robust, interpretable, and real-time disaster response systems and aims to guide future research in earthquake-related Earth observation and rapid damage assessment.

Taskin, Gulsen [Istanbul Technical University] (OR↗