Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface states”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

New and Improved GLDAS Data Sets and Data Services at NASA GES DISC

The goal of a Land Data Assimilation System (LDAS) is to ingest satellite- and ground-based observational data products, using advanced land surface modeling and data assimilation techniques, in order to generate optimal fields of land surface states and fluxes data and, thereby, facilitate hydrology and climate modeling, research, and forecast. With the motivation of creating more climatologically consistent data sets, NASA GSFC's Hydrological Sciences Laboratory has generated more than 60 years (Jan. 1948-- Dec. 2008) of Global LDAS Version 2 (GLDAS-2) data, by using the Princeton Forcing Data Set and upgraded versions of Land Surface Models (LSMs). GLDAS data and data services are provided at NASA GES DISC Hydrology Data and Information Services Center (HDISC), in collaboration with HSL and LDAS.

Rui, Hualan↗

Study and optimization of negative polarity rod pinch diode as flash radiography source at 4.5 MV

The negative polarity rod pinch diode (NPRPD) is a potential millimeter spot size radiography source for high voltage generators (4 to 8 MV) [Cooperstein et al., 'Considerations of rod-pinch diode operation in negative polarity for radiography,' in Proceedings of the 14th IEEE Pulsed Power Conference, 2003, pp. 975-978]. The NPRPD consists of a small diameter (few mm) cylindrical anode extending from the front end of the vacuum cell through a thin annular cathode, held by a central conductor. The polarity has been inverted when compared to the original rod pinch diode [Cooperstein et al., 'Theoretical modeling and experimental characterization of a rod-pinch diode,' Phys. Plasmas 8(10), 4618-4636 (2001)] in order to take advantage from the maximal x-ray emission toward the anode holder at such a voltage [Swanekamp et al., 'Evaluation of self-magnetically pinched diodes up to 10 MV as high resolution flash X-ray sources,' IEEE Trans. Plasma Sci. 32(5), 2004-2016 (2004). We have studied this diode at 4.5 MV, driven by the ASTERIX generator [Raboisson et al., 'ASTERIX, a high intensity X-ray generator,' in Proceedings of the 7th IEEE Pulsed Power Conference, 1989, pp. 567-570.]. This generator, made up of a capacitor bank and a Blumlein line, was initially designed to test the behavior of electronic devices under irradiation. In our experiments, the vacuum diode has been modified in order to set up flash a radiographic diode [Etchessahar et al., 'Negative polarity rod pinch diode experiments on the ASTERIX generator,' in Conference Records-Abstracts, 37th IEEE International Conference on Plasma Science, 2010]. The experiments and numerical simulations presented here allowed the observation and analysis of various physical phenomena associated with the diode operation. Also, the influence of several experimental parameters, such as cathode and anode diameters, materials and surface states, was examined. In order to achieve the most comprehensive characterization of the diode, both optical and x-ray diagnostics were used, including high speed multi-image ICCD (intensified CCD) cameras, streak camera, dosimeters, spot size measurements, and pinhole cameras. A set of new results have been obtained through this study. The plasma emission from the anode and cathode surfaces and its expansion appear to be critical for the diode functioning. Also, for the first time, potential sources of diode instability were identified. Finally, an optimal and stable diode configuration was found with the following parameters: 52 rad at 1 m (in Al) and 2.2 mm spot size.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Epitaxial 2D Magnet and Topological Insulator Heterostructures

I will discuss our latest advances on the epitaxial growth of 2D van der Waals (vdW) magnets and their integration with topological insulators (TI). This work is motivated by the realization of topological phases such as the quantum anomalous Hall effect and highly efficient spin-orbit torque produced by TIs. Our initial studies of MnSe2 growth on Bi2Se3 showed a tendency for the interdiffusion of Mn into the Bi2Se3. This ultimately led to the synthesis of MnBi2Se4 (MBS), a new magnetic TI. Interestingly, the vdW phase is not the thermodynamically stable phase and bulk crystals do not exist, so the epitaxial stabilization of MBS creates the opportunity to explore the magnetic and topological properties of this material. We find that MBS is a layered antiferromagnet, similar to MnBi2Te4, but a difference is that the magnetic moments lie in the plane of the film. Angle resolved photoemission experiments show the presence of a topological surface state with Dirac dispersion. For bilayers of 2D magnets and TIs, we have developed FGT films on Bi2Te3. We first optimized FGT by studying its growth on Ge(111) substrates, where we find that kinetic considerations play a major role. Using cross-sectional scanning transmission electron microscopy and scanning tunneling microscopy, we optimize the FGT films to have atomically smooth surfaces and abrupt interfaces with the Ge(111). Subsequently, we have developed the growth of FGT on Bi2Te3 for the integration of 2D magnets with Tis. Interestingly, we observe room temperature ferromagnetism in FGT/Bi2Te3 heterostructures by varying the growth conditions.

Kawakami, Roland↗

Modeling the Effects of Irrigation on Land Surface Fluxes and States over the Conterminous United States: Sensitivity to Input Data and Model Parameters

Previous studies on irrigation impacts on land surface fluxes/states were mainly conducted as sensitivity experiments, with limited analysis of uncertainties from the input data and model irrigation schemes used. In this study, we calibrated and evaluated the performance of irrigation water use simulated by the Community Land Model version 4 (CLM4) against observations from agriculture census. We investigated the impacts of irrigation on land surface fluxes and states over the conterminous United States (CONUS) and explored possible directions of improvement. Specifically, we found large uncertainty in the irrigation area data from two widely used sources and CLM4 tended to produce unrealistically large temporal variations of irrigation demand for applications at the water resources region scale over CONUS. At seasonal to interannual time scales, the effects of irrigation on surface energy partitioning appeared to be large and persistent, and more pronounced in dry than wet years. Even with model calibration to yield overall good agreement with the irrigation amounts from the National Agricultural Statistics Service (NASS), differences between the two irrigation area datasets still dominate the differences in the interannual variability of land surface response to irrigation. Our results suggest that irrigation amount simulated by CLM4 can be improved by (1) calibrating model parameter values to account for regional differences in irrigation demand and (2) accurate representation of the spatial distribution and intensity of irrigated areas.

CLM4↗

Hall effect measurements on InAs nanowires

We have processed Hall contacts on InAs nanowires grown by molecular beam epitaxy using an electron beam lithography process with an extremely high alignment accuracy. The carrier concentrations determined from the Hall effect measurements on these nanowires are lower by a factor of about 4 in comparison with those measured by the common field-effect technique. The results are used to evaluate quantitatively the charging effect of the interface and surface states.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Some Properties of Fe{sub 1 +y}Se{sub x}Te{sub 1 –x} Single Crystals in the Superconducting and Normal States

Despite a large number of publications proving that a number of different materials can be classified as topological insulators, unambiguous proofs of the existence of promising topological superconductors have not been obtained as yet. The implementation of such systems is important not only for solid state physics, but also for applications, because topological superconductors can be used in quantum computers. We have made an attempt to confirm experimentally the assumption put forth in a number of theoretical publications that FeSe{sub x}Te{sub 1 –x} with the s-wave pairing, which is the simplest iron-containing superconductors, can become, under certain conditions, a topological superconductor with the π-wave pairing, which must have a superconducting gap in the bulk and the Majorana gapless surface states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Weyl magnons in breathing pyrochlore antiferromagnets

Frustrated quantum magnets not only provide exotic ground states and unusual magnetic structures, but also support unconventional excitations in many cases. Using a physically relevant spin model for a breathing pyrochlore lattice, we discuss the presence of topological linear band crossings of magnons in antiferromagnets. These are the analogues of Weyl fermions in electronic systems, which we dub Weyl magnons. The bulk Weyl magnon implies the presence of chiral magnon surface states forming arcs at finite energy. We argue that such antiferromagnets present a unique example, in which Weyl points can be manipulated in situ in the laboratory by applied fields. We discuss their appearance specifically in the breathing pyrochlore lattice, and give some general discussion of conditions to find Weyl magnons, and how they may be probed experimentally. Our work may inspire a re-examination of the magnetic excitations in many magnetically ordered systems.

36 MATERIALS SCIENCE↗

Cosmic ray produced Be-10 and Al-26 in Antarctic rocks - Exposure and erosion history

Cosmic-ray produced Be-10 and Al-26 were measured in purified quartz fractions of selected rock samples from Antarctic mountains. From these data, mean erosion rates were calculated for the limiting case of steady-state surface exposure to cosmic rays, and minimum exposure ages, for the limiting case of no erosion. Calculated mean erosion rates are very low, on the order of a few times 0.00001 cm/yr; the sampling is believed to be sufficient to generalize this result to exposed bedrock in Antarctica. In favorable cases it is possible to distinguish between the limiting cases; steady-state erosion seems a better description in such cases. Most samaples, including some taken a few meters above the present ice level, seem to have been exposed for millions of years, without major episodes of burial or abrasion by ice.

Nishiizumi, K.↗

Precise Nanoelectronics with Adatom Chains

Adatom chains on an atomically regulated substrate will be building components in future precise nanoelectronics. Adatoms need to be secured with chemical bonding, but then electronic isolation between the adatom and substrate systems is not guaranteed. A one-dimensional model shows that good isolation with existence of surface states is expected on an s-p crossing substrate such as Si, Ge, or GaAs, reflecting the bulk nature of the substrate. Isolation is better if adatoms are electronically similar to the substrate atoms, and can be manipulated by hydrogenation. Chain structures with group IV adatoms with two chemical bonds, or group III adatoms with one chemical bond, are semiconducting, reflecting the surface nature of the substrate. These structures are unintentionally doped due to the charge transfer across the chemical bonds. Physical properties of adatom chains have to be determined for the unified adatom-substrate system.

Yamada, Toshishige↗

Thermoelectric Properties of Semimetal and Semiconductor Bi{sub 1 –x}Sb{sub x} Foils and Wires

The results of experimental investigations into the thermoelectric properties (electrical conductivity, thermoelectric power, and thermal conductivity) of microtextured foils and single-crystal wires based on semimetal and semiconductor Bi{sub 1 –x}Sb{sub x} alloys are presented in the temperature range of 4.2–300 K. It is found that the band gap ΔE in Bi–17 at % Sb wires increases with decreasing wire diameter d, which is a manifestation of the quantum-size effect. At low temperatures (T < 50 K), in the wires with d < 400 nm, the electrical conductivity increases due to the significant contribution of highly conductive surface states characteristic of topological insulators. It is found for the first time that the thermal conductivity of semimetal Bi–3 at % Sb foils at low temperatures is two orders of magnitude lower, and that of semiconductor Bi–16 at % Sb foils one order of magnitude lower, than that in bulk samples of the corresponding composition due to significant phonon scattering at grain boundaries and surfaces. This effect leads to considerable enhancement of the thermoelectric figure-of-merit ZT and can be used in miniature low-temperature thermoelectric energy converters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of surface properties on barrier height and barrier inhomogeneities of platinum contacts to n-type 4H-SiC

We investigated the Schottky barrier of Pt/4H-SiC contact as a function of 4H-SiC surface properties which effectively controlled by electronic cyclotron resonance hydrogen plasma pretreatment for different periods and annealing. It is found that the effective barrier height monotonically increases with decreasing the degree of Fermi level pinning. Electrically homogeneous contacts are observed when the Fermi level (FL) is 'pinned (Bardeen limit)' and 'free-pinned (Schottky limit).' However, a partial pinning of FL leads to Gaussian distribution of inhomogeneous barrier height. These results could be correlated with changes in the magnitude and spatial distribution of surface state density after different pretreatments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The impact of nanoperforation on persistent photoconductivity and optical quenching effects in suspended GaN nanomembranes

We report on fabrication of suspended ∼15 nm thick GaN membranes nanoperforated in an ordered fashion using direct writing of negative charges by focused ion beam and subsequent photoelectrochemical etching of GaN epilayers. Both continuous and nanoperforated membranes exhibit persistent photoconductivity (PPC), which can be optically quenched under excitation by 546 nm radiation. Optical quenching of PPC occurs also under relatively intense intrinsic excitation of nanoperforated membranes by 355 nm radiation at T < 100 K. The proposed explanation is based on strong surface localization of charge carriers in nanoperforated membranes and UV-induced reactions occurring at surface states under intense intrinsic excitation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Extent of hydrogen coverage of Si(001) under chemical vapor deposition conditions from ab initio approaches

The extent of hydrogen coverage of the Si(001) c(4 × 2) surface in the presence of hydrogen gas has been studied with dispersion corrected density functional theory. Electronic energy contributions are well described using a hybrid functional. The temperature dependence of the coverage in thermodynamic equilibrium was studied computing the phonon spectrum in a supercell approach. As an approximation to these demanding computations, an interpolated phonon approach was found to give comparable accuracy. The simpler ab initio thermodynamic approach is not accurate enough for the system studied, even if corrections by the Einstein model for surface vibrations are considered. The on-set of H{sub 2} desorption from the fully hydrogenated surface is predicted to occur at temperatures around 750 K. Strong changes in hydrogen coverage are found between 1000 and 1200 K in good agreement with previous reflectance anisotropy spectroscopy experiments. These findings allow a rational choice for the surface state in the computational treatment of chemical reactions under typical metal organic vapor phase epitaxy conditions on Si(001).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ethanol Electro-Oxidation on Ternary Platinum–Rhodium–Tin Nanocatalysts: Insights in the Atomic 3D Structure of the Active Catalytic Phase

Novel insights in the synthesis–structure–catalytic activity relationships of nanostructured trimetallic Pt–Rh–Sn electrocatalysts for the electrocatalytic oxidation of ethanol are reported. In particular, we identify a novel single-phase Rh-doped Pt–Sn Niggliite mineral phase as the source of catalytically active sites for ethanol oxidation; we discuss its morphology, composition, chemical surface state, and the detailed 3D atomic arrangement using high-energy (HE-XRD), atomic pair distribution function (PDF) analysis, and X-ray photoelectron spectroscopy (XPS). The intrinsic ethanol oxidation activity of the active Niggliite phase exceeded those of earlier reports, lending support to the notion that the atomic-scale neighborhood of Pt, Rh, and Sn is conducive to the emergence of active surface catalytic sites under reaction conditions. In situ mechanistic Fourier transform infrared (in situ FTIR) analysis confirms an active 12 electron oxidation reaction channel to CO 2 at electrode potentials as low as 450 mV/RHE, demonstrating the favorable efficiency of the PtRhSn Niggliite phase for C–C bond splitting.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High quality ultrathin Bi{sub 2}Se{sub 3} films on CaF{sub 2} and CaF{sub 2}/Si by molecular beam epitaxy with a radio frequency cracker cell

We report a method to fabricate high quality Bi{sub 2}Se{sub 3} thin films using molecular beam epitaxy with a radio frequency cracker cell as an atomic selenium source. With Se-to-Bi ratios close to exact stoichiometry, optimal layer-by-layer growth of high quality Bi{sub 2}Se{sub 3} thin films with smooth surfaces has been achieved on CaF{sub 2}(111) substrates and Si(111) substrates with a thin epitaxial CaF{sub 2} buffer layer (CaF{sub 2}/Si). Transport measurements show a characteristic weak-antilocalization magnetoresistance in all the films, with the emergence of a weak-localization contribution in the ultrathin film limit. Quantum oscillations, attributed to the topological surface states have been observed, including in films grown on CaF{sub 2}/Si.

36 MATERIALS SCIENCE↗

Topological defects and topological materials

We report that defects in materials that interpolate between two orientation states such as domain walls and those which relate to some kind of material discontinuity, e.g. dislocations and disclinations, comprise topological defects. Noncoplanar vector arrangements, e.g. vortices, skyrmions, and possibly monopole-like excitations, also belong to this family of defects. Presence of such defects affects many of the macroscopic properties of materials, for example electronic transport and strength. Materials in which topological aspects, e.g. edge or surface states, affect the electronic, transport and other properties can be described as topological materials. Topological insulators, topological superconductors and certain Dirac materials, e.g. graphene and Weyl semimetals, belong to this class of materials. Lastly, these materials possess unusual functionalities potentially useful in a variety of information processing and quantum computation based applications.

36 MATERIALS SCIENCE↗

Indium antimonide infrared CCD linear imaging arrays with on-chip preprocessing

A description is presented of the fabrication of a new InSb CCD chip based on an improved process which eliminates the limitations inherent with the earlier techniques. This process includes planar junction formation and an aluminum and SiO2 material system which is amenable to state-of-the-art chemical and plasma delineation techniques. Further, the new chip integrates for the first time in monolithic format InSb IR detectors with an InSb CCD. The reported experiments represent the first operation of an InSb infrared CCD array. In addition to fuller characterization of the 20-element charge-coupled infrared imaging device, several factors which influence device performance are currently being addressed. These include surface state density, the CCD output circuit, and storage time (dark current).

Thom, R. D.↗