Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “subscriptions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Inelastic X-ray scattering experiments on B[subscript 4]C under high static pressures

Boron K-edge inelastic X-ray scattering experiments were performed on clean B{sub 4}C and shock impact recovered boron carbide up to 30 GPa and at ambient temperature to understand the pressure induced bonding changes. The spectral features corresponding to the boron site in the interlinking chain remained unchanged up to 30 GPa. The results of our experiments indicate that pressure induces less distortion to the boron sites and the local amorphization observed in the previous reports are due to the rearrangement of carbon atoms under extreme conditions without affecting the boron environment.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Experimental Study on a Single Cement-Fracture Using CO[subscript 2] Rich Brine

The efficiency of Carbon Capture and Storage (CCS) projects is directly related to the long term sealing efficiency of barrier systems and of wellbore cement in wellbores penetrating storage reservoirs. The microfractures inside the wellbore cement provide possible pathways for CO{sub 2} leakage to the surface and/or fresh water aquifers, impairing the long-term containment of CO{sub 2} in the subsurface. The purpose of this experimental study is to understand the dynamic alteration process in the cement caused by the acidic brine. The first experiment, at ambient temperature and pressure, was conducted by flowing CO{sub 2}-rich brine through 1 in. by 2 in. (25.4 mm by 50.8 mm) cement cores for 4 and 8 weeks durations. The second experiment was a 4 weeks long flow-through experiment conducted at ambient conditions using a 1 in. by 12 in.(25.4 mm by 304.8 mm) cement core and CO{sub 2}-rich brine with a core flooding system under 600 psi (4.13 MPa) confining stress. Post-experiment material analysis from both experiments confirmed leaching of Ca{sup 2+} from reacted cement, as reported in literature. However for the first time, porosity of the reacted regions was semi-quantified applying micro-CT images.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Crossover from melting to dissociation of CO[subscript 2] under pressure: Implications for the lower mantle

A systematic investigation of the solid-solid phase transitions, melting behavior, and chemical reactivity of CO{sub 2} at pressures of 15-70 GPa and temperatures up to 2500 K has been carried out using in situ Raman spectroscopy in laser-heated diamond anvil cells. We find that molecular CO{sub 2} melts to a molecular fluid up to 33 ({+-} 2) GPa and 1720 K ({+-} 100), where it meets a solid-solid phase line to form a triple point. At higher pressure, non-molecular CO{sub 2} phase V does not melt but instead dissociates to carbon and oxygen with a transition line having a negative PT-slope. A comparison with P-T profiles of the Earth's mantle indicates that polymeric CO{sub 2}-V can be stable near the top of the lower mantle and dissociates at greater depths. Decarbonation reactions of subducted carbonates in the lower mantle would produce diamond and fluid oxygen, which in turn significantly affects redox state, increasing oxygen fugacity by several orders of magnitude. The reaction of free oxygen with lower mantle minerals such as Mg-perovskite can create significant conductivity anomalies.

58 GEOSCIENCES↗

Effect of pressure and composition on lattice parameters and unit-cell volume of (Fe,Mg)SiO[subscript 3] post-perovskite

We obtained unit-cell volumes (V) for (Fe{sub 0.2}Mg{sub 0.8})SiO{sub 3} and (Fe{sub 0.4}Mg{sub 0.6})SiO{sub 3} post-perovskite (PPv) over a pressure (P) range of 80-145 GPa by in-situ X-ray diffraction (XRD) measurements in laser-heated diamond anvil cells (DACs). Our study suggests that the PPv structure is highly resistant to back transformation to Pv and (Fe{sub 0.4}Mg{sub 0.6})SiO{sub 3} PPv was preserved down to 80 GPa upon laser heating during decompression before transforming to pure perovskite (Pv). The bulk modulus (K{sub 0}) of PPv was determined to be 215(1) and 198(1) GPa for (Fe{sub 0.2}Mg{sub 0.8})SiO{sub 3} and (Fe{sub 0.4}Mg{sub 0.6})SiO{sub 3} PPv respectively, with a fixed K'{sub 0} = 4. The substitution of Fe for Mg in PPv results in the largest expansion along the b-axis among all three axes and the expansion of the b-axis is nearly independent of pressure whereas the expansion along the a and c directions slightly decreases with increasing pressure. Combining our results with previous studies on (Fe{sub x},Mg{sub 1-x})SiO{sub 3} PPv (x = 0, 0.09, 0.1) shows that the bulk modulus of PPv decreases with increasing Fe content over a composition range x = 0 to 0.4, varying from 231 GPa for x = 0 to 198 GPa for x = 0.4 with zero pressure volumes scaled to composition, V{sub 0} ({angstrom}{sup 3}) = 162.2 + 19.5x and fixed K'{sub 0} = 4.0. The increase of Fe content in PPv from x = 0 to 0.4 results in a 6.3% increase in density and a 5.3% decrease in bulk sound velocity at 130 GPa.

58 GEOSCIENCES↗

Effect of H[subscript 2]O on the density of silicate melts at high pressures: Static experiments and the application of a modified hard-sphere model of equation of state

Density of ultramafic silicate melts was determined using the sink/float technique at high pressures. Seven melt compositions were studied, among which three were dry compositions with different Mg's (molar MgO/(MgO + FeO) x 100) and the other four were hydrous compositions synthesized by adding 2-7 wt.% H{sub 2}O to the anhydrous ones. Experimental conditions range from 9 to 15 GPa and from 2173 to 2473 K. The sinking and floatation of density markers were observed for all melt compositions. Melt density data were analyzed by applying the Birch-Murnaghan equation of state and a newly developed equation of state for silicate melts based on the model of hard sphere mixtures. The presence of water can significantly reduce the density of melts due to its small molecular mass. On the other hand, water makes hydrous silicate melts more compressible than anhydrous melts and therefore the effect of H{sub 2}O on melt density is less significant at high pressures. The density of hydrous melts was then calculated as a function of H{sub 2}O content at the conditions of the bottom of the upper mantle, and was compared with the density of the dominant upper mantle minerals. Results show that the conditions for a negatively buoyant melt that coexists with a pyrolite mantle atop the 410 km discontinuity are marginally satisfied if H{sub 2}O is the only volatile component to facilitate melting, but such conditions will be satisfied by a broader range of conditions when other heavier volatile elements (C, K, etc.) are also present.

58 GEOSCIENCES↗

Developing a robust geochemical and reactive transport model to evaluate possible sources of arsenic at the CO[subscript 2] sequestration natural analog site in Chimayo, New Mexico

Migration of carbon dioxide (CO{sub 2}) from deep storage formations into shallow drinking water aquifers is a possible system failure related to geologic CO{sub 2} sequestration. A CO{sub 2} leak may cause mineral precipitation/dissolution reactions, changes in aqueous speciation, and alteration of pH and redox conditions leading to potential increases of trace metal concentrations above EPA National Primary Drinking Water Standards. In this study, the Chimayo site (NM) was examined for site-specific impacts of shallow groundwater interacting with CO{sub 2} from deep storage formations. Major ion and trace element chemistry for the site have been previously studied. This work focuses on arsenic (As), which is regulated by the EPA under the Safe Drinking Water Act and for which some wells in the Chimayo area have concentrations higher than the maximum contaminant level (MCL). Statistical analysis of the existing Chimayo groundwater data indicates that As is strongly correlated with trace metals U and Pb indicating that their source may be from the same deep subsurface water. Batch experiments and materials characterization, such as: X-ray diffraction (XRD), scanning electron microscopy (SEM), and synchrotron micro X-ray fluorescence ({mu}-XRF), were used to identify As association with Fe-rich phases, such as clays or oxides, in the Chimayo sediments as the major factor controlling As fate in the subsurface. Batch laboratory experiments with Chimayo sediments and groundwater show that pH decreases as CO{sub 2} is introduced into the system and buffered by calcite. The introduction of CO{sub 2} causes an immediate increase in As solution concentration, which then decreases over time. A geochemical model was developed to simulate these batch experiments and successfully predicted the pH drop once CO{sub 2} was introduced into the experiment. In the model, sorption of As to illite, kaolinite and smectite through surface complexation proved to be the key reactions in simulating the drop in As concentration as a function of time in the batch experiments. Based on modeling, kaolinite precipitation is anticipated to occur during the experiment, which allows for additional sorption sites to form with time resulting in the slow decrease in As concentration. This mechanism can be viewed as trace metal 'scavenging' due to sorption caused secondary mineral precipitation. Since deep geologic transport of these trace metals to the shallow subsurface by brine or CO{sub 2} intrusion is critical to assessing environmental impacts, the effective retardation of trace metal transport is an important parameter to estimate and it is dependent on multiple coupled reactions. At the field scale, As mobility is retarded due to the influence of sorption reactions, which can affect environmental performance assessment studies of a sequestration site.

54 ENVIRONMENTAL SCIENCES↗