Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “structure function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Unoccupied electronic resonances of Sc adsorbed on W(001) by k-resolved inverse photoemission

Scandium adsorbed on the (001) face of tungsten has been studied using Auger-electron spectroscopy, low-energy electron diffraction, k-resolved inverse photoelectron spectroscopy, work-function measurements, and relativistic-electronic-structure calculations. We find that the work function of W(001) does not decrease monotonically as a function of scandium adsorption but reaches a minimum value of Phi = 3.25 eV at 50% coverage. For a complete monolayer, an order 1 X 1 Sc overlayer is formed. Inverse photoemission in the isochromat mode was used to map the unoccupied energy levels of this overlayer along the bar-Gamma(bar-Mu) symmetry direction of the surface Brillouin zone. Local-density-functional calculations using the muffin-tin orbital method were performed for a 1 X 1 Sc overlayer on W and are compared with the experimental two-dimensional band structure.

Lamouri, A.↗
NASA NTRS1985

ISAAC (integrated Structural Analysis and Control) via Continuum Modeling and Distributed Frequency Domain Design Techniques

A methodology is proposed for the integrated design of structures and their controls. The integration of design is accomplished through simultaneous selection, via optimization, of designer-specified parameters governing the structure and its controller. The cost function is chosen to address the primary structural and control goals. Inequality constraints are added to insure that additional design requirements are met. The methodology is illustrated through development of an example involving a cantilever beam. A distributed transfer function is derived from the Bernoulli-Euler beam equation. A controller parameterization is then chosen, and performance requirements specified. A controller is then obtained via optimization, which is shown to give good performance.

Gustafson, C. L.↗
NASA NTRS1979

Numerical results for the thermal scattering functions

A recent formulation in radiative transfer defined the thermal scattering functions that characterize radiative transfer from a general plane-parallel finite medium driven solely by an internal distribution of thermal sources. Exiting diffuse intensities are expressed as space convolutions of the thermal scattering functions with any thermal source distribution. A parametric study is presented to obtain the basic structure of these scattering functions. The independent variables of these azimuthally independent functions are the direction cosine and source location, while the parameters are the single-scattering albedo, total optical depth, and the asymmetry factor in the Henyey-Greenstein phase function. The basic functional trends are discussed by using various parametric plots, and selected results are given to allow numerical checks. The computational method is invariant imbedding.

Cogley, A. C.↗
NASA NTRS1990

Structural behavior of composites with progressive fracture

Structural characteristics such as natural frequencies and buckling loads with corresponding mode shapes were investigated during progressive fracture of multilayer, angle-plied polymer matrix composites. A computer program was used to generate the numerical results for overall mechanical response of damaged composites. Variations in structural characteristics as a function of the previously applied loading were studied. Results indicate that most of the overall structural properties were preserved throughout a significant proportion of the ultimate fracture load. For the cases studied, changes in structural behavior began to occur after 70 percent of the ultimate fracture load was applied. However, the individual nature of the structural change was rather varied depending on the laminate configuration, fiber orientation, and the boundary conditions.

Minnetyan, Levon↗
NASA NTRS1985

Numerical solution of the vertical structure equation in the normal mode method

In the present model of multilayered stability stratification, aimed at obtaining the analytic eigensolutions of the vertical structure equation, each layer is characterized by its own static stability value. By requiring continuity of pressure and vertical velocity across each interface level, and by imposing suitable upper and lower boundary conditions, matching eigensolutions are obtained in terms of the Bessel functions. Attention is given to an explicit example of a double-layered stratified atmosphere which demonstrates the mathematical manipulations involved; the resultant vertical structure functions are used to check the accuracy of the numerical solutions by the finite difference and finite element methods.

Sasaki, Y. K.↗
NASA NTRS1995

The Structure and Stability of Bn(+) Clusters

The geometries of B+n clusters for n less than 14 have been optimized using density functional theory with the B3LYP functional. The most stable structure for each cluster is planar or quasi-planar. The B3LYP fragmentation energies are calibrated using coupled cluster theory. Overall, our corrected fragmentation energies are in reasonable agreement with experiment. Our results are compared with previous theoretical results.

Ricca, Alessandra↗
NASA NTRS1998

Co- and/or post-translational modifications are critical for TCH4 XET activity

TCH4 encodes a xyloglucan endotransglycosylase (XET) of Arabidopsis thaliana. XETs endolytically cleave and religate xyloglucan polymers; xyloglucan is one of the primary structural components of the plant cell wall. Therefore, XET function may affect cell shape and plant morphogenesis. To gain insight into the biochemical function of TCH4, we defined structural requirements for optimal XET activity. Recombinant baculoviruses were designed to produce distinct forms of TCH4. TCH4 protein engineered to be synthesized in the cytosol and thus lack normal co- and post-translational modifications is virtually inactive. TCH4 proteins, with and without a polyhistidine tag, that harbor an intact N-terminus are directed to the secretory pathway. Thus, as predicted, the N-terminal region of TCH4 functions as a signal peptide. TCH4 is shown to have at least one disulfide bond as monitored by a mobility shift in SDS-PAGE in the presence of dithiothreitol (DTT). This disulfide bond(s) is essential for full XET activity. TCH4 is glycosylated in vivo; glycosidases that remove N-linked glycosylation eliminated 98% of the XET activity. Thus, co- and/or post-translational modifications are critical for optimal TCH4 XET activity. Furthermore, using site-specific mutagenesis, we demonstrated that the first glutamate residue of the conserved DEIDFEFL motif (E97) is essential for activity. A change to glutamine at this position resulted in an inactive protein; a change to aspartic acid caused protein mislocalization. These data support the hypothesis that, in analogy to Bacillus beta-glucanases, this region may be the active site of XET enzymes.

NASA Discipline Cell Biology↗
NASA NTRS1989

Global functions in global-local finite-element analysis of localized stresses in prismatic structures

An important consideration in the global local finite-element method (GLFEM) is the availability of global functions for the given problem. The role and mathematical requirements of these global functions in a GLFEM analysis of localized stress states in prismatic structures are discussed. A method is described for determining these global functions. Underlying this method are theorems due to Toupin and Knowles on strain energy decay rates, which are related to a quantitative expression of Saint-Venant's principle. It is mentioned that a mathematically complete set of global functions can be generated, so that any arbitrary interface condition between the finite element and global subregions can be represented. Convergence to the true behavior can be achieved with increasing global functions and finite-element degrees of freedom. Specific attention is devoted to mathematically two-dimensional and three-dimensional prismatic structures. Comments are offered on the GLFEM analysis of NASA flat panel with a discontinuous stiffener. Methods for determining global functions for other effects are also indicated, such as steady-state dynamics and bodies under initial stress.

Dong, Stanley B.↗
NASA NTRS1993

Structure identification in fuzzy inference using reinforcement learning

In our previous work on the GARIC architecture, we have shown that the system can start with surface structure of the knowledge base (i.e., the linguistic expression of the rules) and learn the deep structure (i.e., the fuzzy membership functions of the labels used in the rules) by using reinforcement learning. Assuming the surface structure, GARIC refines the fuzzy membership functions used in the consequents of the rules using a gradient descent procedure. This hybrid fuzzy logic and reinforcement learning approach can learn to balance a cart-pole system and to backup a truck to its docking location after a few trials. In this paper, we discuss how to do structure identification using reinforcement learning in fuzzy inference systems. This involves identifying both surface as well as deep structure of the knowledge base. The term set of fuzzy linguistic labels used in describing the values of each control variable must be derived. In this process, splitting a label refers to creating new labels which are more granular than the original label and merging two labels creates a more general label. Splitting and merging of labels directly transform the structure of the action selection network used in GARIC by increasing or decreasing the number of hidden layer nodes.

Berenji, Hamid R.↗
NASA NTRS1993

Structural design utilizing updated, approximate sensitivity derivatives

A method to improve the computational efficiency of structural optimization algorithms is investigated. In this method, the calculations of 'exact' sensitivity derivatives of constraint functions are performed only at selected iterations during the optimization process. The sensitivity derivatives utilized within other iterations are approximate derivatives which are calculated using an inexpensive derivative update formula. Optimization results are presented for an analytic optimization problem (i.e., one having simple polynomial expressions for the objective and constraint functions) and for two structural optimization problems. The structural optimization results indicate that up to a factor of three improvement in computation time is possible when using the updated sensitivity derivatives.

Scotti, Stephen J.↗
NASA NTRS2018

Characterizing Material Scalability for Ultralight Lattice Design

Stiff yet ultra-light lattice structures constructed using digital materials have many practical applications as the building block for aircraft and other structures. By furthering our understanding of how material configuration affects the structural properties of an ultralight lattice, we can intelligently design these structures based on their intended function. Here we compare the behavior of ultralight lattice structures when fabricated by different materials. The individual unit cells of the lattice structures are referred to as voxels. The stiffness, elastic modulus, and yield strength of the specimens in compression and tension are determined through mechanical testing. Specimens are tested both as single voxel as well as 4x4x4 voxel constructions on an Instron 5982 Universal Testing System until failure. Each voxel is manufactured in bulk through injection molding, with a unit cell pitch of 76.2 mm. Individual voxels are fastened with machine screws and nuts to create assemblies. Four separate materials are used as voxel compositions in this experiment. These include a homogeneous polymer referred to as Ultem 1000, a glass-fiber reinforced polymer referred to as Ultem 2200, a polymer with chopped carbon fibers as 30% of its fill, and homogenous polypropylene. This work compares mechanical behavior, as well as the convergence behavior of the lattice as the size of the lattice assembly increases for various materials. The goal of this study is to characterize the behavior of homogenous lattices such that heterogenous lattices can be designed with different material voxels to achieve target material properties for ultralight space applications.

Sajjadi, Afsheen↗
NASA NTRS1993

Analysis and effects of the advanced solid rocket motor on the Space Shuttle elements

This interim final report summarizes the activities and major accomplishments under NASA/MSFC Contract NAS8-39235 for the initial two year contractual effort beginning October 1, 1991, and ending September 30, 1993. It is not intended as an exhaustive treatment or review of any particular technical issue which was addressed during this two-year period, but does provide an overview of the many induced environment studies and test support activities undertaken by REMTECH and its subcontractors during this two-year period. The initial scope of work has been pursued vigorously through this two-year period by separating the effort into five functional areas. The five functional areas are ascent plume radiation, ascent plume convection, ascent aerodynamic heating, launch stand environments, and reentry heating. A work breakdown structure (WBS) for each functional area was devised to permit nearly autonomous activities within each functional responsibility while maintaining commonality in reporting procedures and cost accounting. The contract was modified 11 times to provide incremental funding and to expand the scope of work. Additional work breakdown structure was incorporated to meet the expanded scope. A contract chronology is provided in Section 2. The initial scope of work, expanded scope, and corresponding WBS designation are described in Section 3. A summary review of major accomplishments is also provided in Section 4 to show the breadth of activities and extent of reporting. Reports, meetings, test activities, and other accomplishments within each functional area are also summarized by WBS heading in the appendices.

Source record↗
NASA NTRS1984

Response and characteristics of structures subjected to S-H waves

A study of the dynamic characteristics of a coupled translational-rotational system is given. The formulation of the problem considers the soil-structure interaction effects by utilizing the impedance functions at the foundation of a structure. Due to the fact that the coefficient matrix in the characteristic equation is frequency dependent in nature, iterations have to be performed to find the nature frequencies of the system. Examples and discussions are presented. Comparisons of the analytical results from various approaches are also given.

Wu, S. T.↗
NASA NTRS2011

Defining the Relationship Between Biomarkers of Oxidative and Inflammatory Stress and the Risk for Atherosclerosis in Astronauts During and After Long-Duration Spaceflight

Future human space travel will primarily consist of long-duration missions aboard the International Space Station (ISS) or exploration class missions to Mars, its moons, or nearby asteroids. These missions will expose astronauts to increased risk of oxidative and inflammatory damage primarily from radiation, but also from psychological stress, reduced physical activity, diminished nutritional status, and, in the case of extravehicular activity, hyperoxic exposure. There is evidence that increased oxidative damage and inflammation can accelerate the development of atherosclerosis. PURPOSE The purpose of this proposal is to identify biomarkers of oxidative and inflammatory stress and to correlate them to indices of atherosclerosis risk before, during, and after long-duration spaceflight. METHODS To meet the objectives of the study, we will study astronauts before, during, and up to 5 years after long-duration missions aboard ISS. Biomarkers of oxidative and inflammatory stress, some of which we have previously shown to be elevated with spaceflight, will be measured before, during, and after spaceflight. Arterial structure will be monitored using ultrasound to measure carotid intima-medial thickness before, during, and after weightlessness. Carotid intima-medial thickness has been shown to be a better indicator than Framingham Risk scores for prediction of atherosclerosis. Arterial function will be monitored using brachial flow-mediated dilation before flight and after landing. Brachial flow-mediated dilation is a good index of endothelium-dependent vasodilation, which is a sensitive predictor of atherosclerotic risk. This is the first study to propose assessing atherosclerotic risk using biochemical, structural, and functional measures before, during, and immediately after spaceflight and structural functional measures for up to 5 years after landing. EXPECTED RESULTS We hypothesize that these biomarkers of oxidative and inflammatory stress will be increased with spaceflight and will correlate with increased carotid intima-medial thickness in- and postflight and with decreased flow-mediated dilation after the mission. Furthermore, we hypothesize that measures of oxidative stress will return to baseline after flight, but that biomarkers of inflammatory stress and vascular indices of atherosclerosis risk will remain elevated.

Lee, Stuart M. C.↗
NASA NTRS1987

Self similarity of two point correlations in wall bounded turbulent flows

The structure of turbulence at a height y from a wall is affected by the local mean shear at y, by the direct effect of the wall on the eddies, and by the action of other eddies close to or far from the wall. Some researchers believe that a single one of these mechanisms is dominant, while others believe that these effects have to be considered together. It is important to understand the relative importance of these effects in order to develop closure models, for example for the dissipation or for the Reynolds stress equation, and to understand the eddy structure of cross correlation functions and other measures. The specific objective was to examine the two point correlation, R sub vv, of the normal velocity component v near the wall in a turbulent channel flow and in a turbulent boundary layer. The preliminary results show that even in the inhomogeneous turbulent boundary layer, the two-point correlation function may have self similar forms. The results also show that the effects of shear and of blocking are equally important in the form of correlation functions for spacing normal to the wall. But for spanwise spacing, it was found that the eddy structure is quire different in these near flows. So any theory for turbulent structure must take both these effects into account.

Hunt, J. C. R.↗
NASA NTRS1993

Simple systems that exhibit self-directed replication

Biological experience and intuition suggest that self-replication is an inherently complex phenomenon, and early cellular automata models support that conception. More recently, simpler computational models of self-directed replication called sheathed loops have been developed. It is shown here that 'unsheathing' these structures and altering certain assumptions about the symmetry of their components leads to a family of nontrivial self-replicating structures some substantially smaller and simpler than those previously reported. The dependence of replication time and transition function complexity on initial structure size, cell state symmetry, and neighborhood are examined. These results support the view that self-replication is not an inherently complex phenomenon but rather an emergent property arising from local interactions in systems that can be much simpler than is generally believed.

Reggia, James A.↗
NASA NTRS1989

The perception of geometrical structure from congruence

The principle function of vision is to measure the environment. As demonstrated by the coordination of motor actions with the positions and trajectories of moving objects in cluttered environments and by rapid recognition of solid objects in varying contexts from changing perspectives, vision provides real-time information about the geometrical structure and location of environmental objects and events. The geometric information provided by 2-D spatial displays is examined. It is proposed that the geometry of this information is best understood not within the traditional framework of perspective trigonometry, but in terms of the structure of qualitative relations defined by congruences among intrinsic geometric relations in images of surfaces. The basic concepts of this geometrical theory are outlined.

Lappin, Joseph S.↗