Electron-Excited Fluorescence of Serpentines
Elemental composition effect on electron excited fluorescence of serpentines determined by spectral examination with electron microprobe
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Elemental composition effect on electron excited fluorescence of serpentines determined by spectral examination with electron microprobe
Organic compounds carbon K emission spectra, using light element X ray spectrometer for aliphatic, aromatic and partly ionic substances spectral analysis
Correlations of asteroid spectral reflectivity characteristics with orbital parameters have been sought. Asteroid proper elements and extreme heliocentric distance were examined. Only general trends were noted, primarily red asteroids and asteroids with IR (.95 micron) absorption bands are concentrated toward the inner part of the belt. Also, asteroids with the pyroxene band tend to have larger proper eccentricities relative to non-banded asteroids.
Intermediate-resolution data obtained with the Copernicus satellite are surveyed in order to define the region in the H-R diagram where mass loss occurs. The survey includes 40 stars, providing good coverage of supergiants from O4 to A2 and main-sequence stars from O4 to B7 as well as spotty coverage of late O giants and intermediate to late B stars. The spectral transitions examined are primarily resonance lines of ions of abundant elements plus some lines arising from excited states (e.g., C III at 1175.7 A and Si IV at 1122.5 A). Observed P Cygni profiles are discussed along with interesting features of some individual profiles. The data are shown to indicate that mass-loss effects occur over a wide portion of the H-R diagram, that mass ejection generally occurs when the holometric magnitude is greater than -6.0, and that the mass-ejection rate is usually high enough to produce P Cygni profile whenever the N V feature at 1240 A is present in a spectrum.
This investigation employs a computer code, initially constructed for modeling the evolution of a hot dense intergalactic medium (IGM), to study some properties of a cold dense IGM photoionized by QSOs. Within the observational constraints set by flux measurements in the far-ultraviolet, night sky brightness, and hard X-ray region, and the optical depth limits on various QSO spectra, it determines some allowable scenarios for a range of QSO spectral indices (alpha) and cutoff energies. With H(0) = 50 km/s-Mpc, closure density of an IGM (composed of H and He in their cosmic ratio) is possible only if alpha is greater than or equal to 0.1, a circumstance not likely to prevail; the most probable value, alpha = -0.7, implies an upper limit density about 0.35 of closure, which is somewhat larger than previous estimates. These estimates are substantially independent of whether or not QSOs produce the observed diffuse extragalactic X-ray background; such QSO spectral details are critical, however, in determining the ionization of heavy elements that are expected to contaminate a pure primeval plasma.
The rational for using remote sensing in land use/land cover, geomorphology, and cartography applications is stated as well as potential uses in each of these areas. The next step to be perfected is indicated. Spatial and spectral resolution requirements for photointerpretations and/or multispectral pattern recognition of geomorphic elements and of cultural surface cover are listed. Requirements for photographic/analog or digital photogrammetry from spaceborne multispectral linear array sensors are included. A prioritized summary of data gaps in the geographic sciences is included.
The "all-particle" cosmic ray energy spectrum appears to be exhibiting a significant change in the spectral index just above approximately 3000 TeV. This could indicate (1) a change in the propagation of the cosmic rays in the galactic medium, and/or (2) the upper limit of the supernova shock wave acceleration mechanism, and/or (3) a new source of high-energy cosmic rays. Air shower and JACEE data indicate the spectral change is associated with a composition change to a heavier element mixture whereas DICE does not indicate this. A detector concept will be presented that utilizes the energy dependence of the production of direct Coulomb electron-positron pairs by energetic heavy ions. Monte Carlo simulations of a direct electron pair detector consisting of Pb target foils interleaved with planes of 1-mm square scintillating optical fibers will be discussed. The goal is to design a large area, non-saturating instrument to measure the energy spectrum of the individual cosmic ray elements in the "VH-group" for energies greater than 10 TeV/nucleon.
Thermophotovoltaic (RTV) energy conversion, coupled to the radioisotope powered General Purpose Heat Source (GPHS) is currently being developed by NASA. The goal of the program is to develop a 100 watt electrical power system with an efficient of 20%. Special control is the key element in obtaining an efficient system. Results presented show that excellent spectral control can be achieved so that reaching the goal of 20% efficiency is possible. Excellent spectral control is achieved by using a combination of selective emitters and optical filters and by eliminating radiation leakage from the optical cavity.
Since it was developed in 1979, the Robert-Bonamy (RB) formalism has been widely used in calculating pressure broadened half-widths and induced shifts for many molecular systems. However, this formalism contains several approximations whose applicability has not been thoroughly justified. One of them is that lines of interest are well isolated. When these authors developed the formalism, they have relied on this assumption twice. First, in calculating the spectral density F(ω), they have only considered the diagonal matrix elements of the relaxation operator. Due to this simplification, effects from the line mixing are ignored. Second, when they applied the linked cluster theorem to remove the cutoff, they have assumed the matrix elements of the operator exp(-iS(sub 1) - S(sub 2)) can be replaced by the exponential of the matrix elements of -iS(sub 1) - S(sub 2). With this replacement, effects from the line coupling are also ignored. Although both these two simplifications relied on the same approximation, their validity criteria are completely different and the latter is more stringent than the former. As a result, in many cases where the line mixing becomes negligible, significant effects from the line coupling have been completely missed. In the present study, we have developed a new method to evaluate the matrix elements of exp(-iS(sub 1) - S(sub 2)) and have refined the RB formalism such that line coupling can be taken into account. Our numerical calculations of the half-widths for Raman Q lines of the N(sub 2)-N(sub 2) pair have demonstrated that effects from the line coupling are important. In comparison with values derived from the RB formalism, new calculated values for these lines are significantly reduced. A recent study has shown that in comparison with the measurements and the most accurate close coupling calculations, the RB formalism overestimates the half-widths by a large amount. As a result, the refinement of the RB formalism goes in the right direction and these new calculated half-widths become closer to the "true" values.
We describe the design of a high-throughput pushbroom imaging spectrometer and telescope system that is capable of Landsat swath and resolution while providing better than 10 nm per pixel spectral resolution. The design is based on a 3200 x 480 element x 18 μm pixel size focal plane array, two of which are utilized to cover the full swath. At an optical speed of F/1.8, the system is the fastest proposed to date to our knowledge. The utilization of only two spectrometer modules fed from the same telescope reduces system complexity while providing a solution within achievable detector technology. Predictions of complete system response are shown. Also, it is shown that detailed ghost analysis is a requirement for this type of spectrometer and forms an essential part of a complete design.
An imaging system is provided that includes a optical pulse generator for providing an optical pulse having a spectral bandwidth and includes monochromatic waves having different wavelengths. A dispersive element receives a second optical pulse associated with the optical pulse and disperses the second optical pulse at different angles on the surface of the dispersive element depending on wavelength. One or more focal elements receives the dispersed second optical pulse produced on the dispersive element. The one or more focal element recombine the dispersed second optical pulse at a focal plane on a specimen where the width of the optical pulse is restored at the focal plane.
The relative concentration of cesium to hydrogen in the plasma of a H - magnetron source is an important parameter for reliable operations. If there is too much cesium, the surfaces of the source become contaminated with it and sparking occurs. If there is too little cesium then the plasma cannot be sustained. In order to monitor these two elements, a spectrometer has been built and installed on a test and operating source that looks at the plasma. It is hypothesized that the concentration of each element in the plasma is proportional to the intensity of their spectral lines.
Cornell group has developed recipes to grow photocathodes belonging to the alkali antimonide family using evaporation from elemental sources with and without line of sight between the sources and the glass substrate. Photocathodes were characterized in terms of their quantum efficiency in the spectral range covering the visible and the near infrared part of the spectrum. Two different approaches have been used to demonstrate the growth of high quantum efficiency photocathodes: the first approach makes use of elemental antimony and alkali metals loaded into ceramic crucibles hosted into effusion cells like the one used in molecular beam epitaxy reactors; whereas in the second approach the antimony film is evaporated onto the transparent substrate using effusion cells and then transferred into a different reaction chamber where exposure to the alkali metals coming from an elemental source lacking the line of sight to the substrate is used to produce the photocathode material. The research conducted opens the exploration of alternative methods for the synthesis of photocathodes specifically designed to be implemented over large areas maximizing the production throughput and lowering the cost. It particular, this research can benefit future HEP programs by providing new methods that can be adopted to produce photon detectors for future experiments.
Metamaterials are comprised of metallic structures with a strong response to incident electromagnetic radiation, like, for example, split ring resonators. The interaction of resonator ensembles with electromagnetic waves can be simulated with finite difference or finite elements algorithms, however, above a certain ensemble size simulations become inadmissibly time or memory consuming. Alternatively a circuit description of metamaterials, a well developed modelling tool at radio and microwave frequencies, allows to significantly increase the simulated ensemble size. This approach can be extended to the IR spectral range with an appropriate set of circuit element parameters accounting for physical effects such as electron inertia and finite conductivity. The model is verified by comparing the coupling coefficients with the ones obtained from the full wave numerical simulations, and used to optimize the nano-antenna design with improved radiation characteristics.
Laser-induced Plasma spectroscopy (LIPS) is a useful method for determining the elemental composition of various materials but for long time it have been mainly restricted to qualitative and quantitative analysis of samples material. Recently LIPS is applied in addition to depth-profile analysis. In this paper we were trying to investigate the differences in the depth profile, obtained adopting femtosecond LIPS, that may occur on changing the spectral lines chosen for the analysis. The used femtosecond laser has pulse duration of 130 fs, wave length of 795 nm and pulse energy 200 {mu}J. It was found that the differences observed were not significant as long as the spectral lines chosen are fulfilling the LIPS spectral lines conditions.
Newly born pulsars offer favorable sites for the injection of heavy nuclei, and for their further acceleration to ultrahigh energies. Once accelerated in the pulsar wind, nuclei have to escape from the surrounding supernova envelope. We examine this escape analytically and numerically and discuss the pulsar source scenario in light of the latest ultrahigh energy cosmic ray (UHECR) data. Our calculations show that, at early times, when protons can be accelerated to energies E > 10{sup 20} eV, the young supernova shell tends to prevent their escape. In contrast, because of their higher charge, iron-peaked nuclei are still accelerated to the highest observed energies at later times, when the envelope has become thin enough to allow their escape. Ultrahigh energy iron nuclei escape newly born pulsars with millisecond periods and dipole magnetic fields of {approx}10{sup 12}-10{sup 13} G, embedded in core-collapse supernovae. Due to the production of secondary nucleons, the envelope crossing leads to a transition of composition from light to heavy elements at a few EeV, as observed by the Auger Observatory. The escape also results in a softer spectral slope than that initially injected via unipolar induction, which allows for a good fit to the observed UHECR spectrum. We conclude that the acceleration of iron-peaked elements in a reasonably small fraction ({approx}< 0.01%) of extragalactic rotation-powered young pulsars would reproduce satisfactorily the current UHECR data. Possible signatures of this scenario are also discussed.
Linear MnC{sub 3} has been detected in the products from the dual laser ablation of carbon and manganese rods trapped in solid Ar at {approx}12 K. The {nu}{sub 1}({sigma}) vibrational fundamental, an asymmetric carbon stretching mode, has been identified at 1846.9 cm{sup -1}. Fourier transform infrared measurements of {sup 13}C isotopic shift are in good agreement with the predictions of density functional theory calculations using the mPW1PW91 functional with 6-311+G(3df) basis set. This is the first optical detection of the linear isomer of MnC{sub 3} for which previous photoelectron spectroscopy studies have reported evidence of a cyclic isomer.
Biomass burning is an important process on the Earth at the local, regional and global scales. To investigate issues related to biomass burning, a range of remotely acquired data were measured as part of the NASA Smoke Cloud Aerosol and Radiation experiment in Brazil, 1995. As part of this experiment, images of calibrated spectral radiance from 400 to 2500 nm at 10 nm intervals were acquired by AVIRIS. To investigate the expression of biomass fires in AVIRIS spectra, a model of the upwelling radiance from a burning fire was developed. This spectral model accounts for four components in the 20 by 20 m AVIRIS spatial resolution element. These are: (1) the atmospheric path radiance, (2) the solar reflected radiance from unburnt vegetation and soil, (3) the apparent temperature and area of a primary fire, and (4) the apparent temperature and area of a secondary fire. A nonlinear least squares spectral fitting algorithm was developed to invert this model for the AVIRIS spectra. The derived biomass burning parameters from this algorithm are presented for AVIRIS spectral images acquired over Cuiaba, Brazil on 25 August 1995.