Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Impurity-induced photoconductivity of narrow-gap Cadmium–Mercury–Telluride structures

The photoconductivity (PC) spectra of CdHgTe (MCT) solid solutions with a Cd fraction of 17 and 19% are measured. A simple model for calculating the states of doubly charged acceptors in MCT solid solutions, which makes it possible to describe satisfactorily the observed photoconductivity spectra, is proposed. The found lines in the photoconductivity spectra of narrow-gap MCT structures are associated with transitions between the states of both charged and neutral acceptor centers.

36 MATERIALS SCIENCE↗

Absence of long-range chemical ordering in equimolar FeCoCrNi

Equimolar FeCoCrNi alloys have been the topic of recent research as 'high-entropy alloys,' where the name is derived from the high configurational entropy of mixing for a random solid solution. Despite their name, no systematic study of ordering in this alloy system has been performed to date. Here, we present results from anomalous x-ray scattering and neutron scattering on quenched and annealed samples. An alloy of FeNi{sub 3} was prepared in the same manner to act as a control. Evidence of long-range chemical ordering is clearly observed in the annealed FeNi{sub 3} sample from both experimental techniques. The FeCoCrNi sample given the same heat treatment lacks long-range chemical order.

36 MATERIALS SCIENCE↗

Correlating Transport and Structural Properties in Li 1+ x Al x Ge 2– x (PO 4 ) 3 (LAGP) Prepared from Aqueous Solution

Li 1+ x Al x Ge 2– x (PO 4 ) 3 (LAGP) is a solid lithium-ion conductor belonging to the NASICON family, representing the solid solution of LiGe 2 (PO 4 ) 3 and AlPO 4 . The typical syntheses of LAGP either involve high-temperature melt-quenching, which is complicated and expensive, or a sol–gel process requiring costly organic germanium precursors. Herein, we report a simple method based on aqueous solutions without the need of ethoxide precursors. Using synchrotron and neutron diffraction, the crystal structure, the occupancies for Al and Ge, and the distribution of lithium were determined. Substitution of germanium by aluminum allows for an increased Li + incorporation in the material and the actual Li + content in the sample increases with the nominal Li + content and a solubility limit is observed for higher aluminum content. By means of impedance spectroscopy, an increase in the ionic conductivity with increasing lithium content is observed. Whereas the lithium ionic conductivity improves, due to the increasing carrier density, the bulk activation energy increases. This correlation suggests that changes in the transport mechanism and correlated motion may be at play in the Li 1+ x Al x Ge 2– x (PO 4 ) 3 solid solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Toward a tunable fabrication of multifunctional iron-aluminum spinels via solution combustion synthesis: The effects of fuel, heating mode, and Fe:Al precursor ratio

The solid solutions of iron and aluminum spinels (hercynite, maghemite, magnetite, and γ-alumina) are promising materials for emerging technologies such as solar thermochemical fuel production and clean dehydrogenation of fossil fuels. Solution combustion synthesis (SCS) is an attractive technique for the fabrication of these materials as it has been used for synthesis of many nanoscale oxides. However, the design space of SCS is large with many synthesis parameters affecting the properties of the combustion products. To optimize the SCS of these materials, it is important to determine which parameters yield the best properties. In the present work, FeAlO x nanocomposites were obtained by SCS using iron nitrate and aluminum nitrate as precursors and oxidizers. Two fuels (citric acid and glycine), three Fe:Al molar ratios (1:2, 1:1, and 2:1) in the precursors, and three heating modes (hotplate, muffle furnace, and microwave oven) were compared. The products were characterized by X-ray diffraction analysis, scanning electron microscopy, Brunauer-Emmett-Teller surface area analysis, and laser diffraction particle size analysis. The fuel used had the largest impact on the combustion behavior and hence the material properties. The high combustion temperature of glycine allowed for the formation of an FeAl 2 O 4 /Fe 3 O 4 solid solution, while the lower-temperature combustion of citric acid yielded Al-substituted γ-Fe 2 O 3 with high amorphous content. With citric acid, the specific surface area as high as 200 m 2 /g was achieved. The effect of Fe:Al precursor ratio was clearly seen in variations of the lattice parameter, which demonstrated the ability to tune the phase composition. The heating mode had minor effects on material properties, but some differences were observed. As a result, all products obtained by SCS in a microwave oven had low specific surface areas compared to those obtained with a hotplate and a muffle furnace.

Alumina↗

Modeling of the phase evolution in Mg1-xAlxB2 (0<x<0.5) and its experimental signatures

Despite the chemical and structural simplicity of MgB{sub 2}, at 39 K this compound has the highest known {Tc} of any binary compound. Electron doping by substituting Al for Mg leads to decreasing Tc and the observed concentration dependent rate of decrease has been proposed to arise from the non-ideal character of MgB{sub 2}-AIB{sub 2} solid solutions, which derives from the existence of an ordered Mg{sub 0.5}Al{sub 0.5}B{sub 2} compound. Heterogeneous nano-scale structure patterns in solid solutions have emerged as an important concept for complex materials, ranging from actinide alloys and oxides to high-temperature cuprate superconductors and mallganite-based materials exhibiting colossal magnetoresistivity. In this work we investigate the formation of structural heterogeneities in Mg{sub 1-x}AI{sub x}B{sub 2}, which take the form of nano-scale AI-AI and AI-Mg domains of different geometry and size, using molecular statics/dynamics simulations and in particular we study the corresponding signatures in diffraction experiments. In order to undertake this task we first derive appropriate Mg-AI-B semi-empirical potentials within the Modified Embedded Atom Method formalism. These potentials are also applied to explore the equilibrium Mg{sub 1-x}AI{sub x}B{sub 2} phase diagram for 0 < x < 0.5. Additionally, density functional theory calculations were utilized to study the influence of heterogeneities on the electronic structure and charge distribution in Mg{sub 1-x}AI{sub x}B{sub 2}.

36 MATERIALS SCIENCE↗

Helium Behavior in Oxide Nuclear Fuels: First Principles Modeling

UO2 and (U, Pu)O2 solid solutions (the so-called MOX) nowadays are used as commercial nuclear fuels in many countries. One of the safety issues during the storage of these fuels is related to their self-irradiation that produces and accumulates point defects and helium therein. We present density functional theory (DFT) calculations for UO2, PuO2 and MOX containing He atoms in octahedral interstitial positions. In particular, we calculated basic MOX properties and He incorporation energies as functions of Pu concentration within the spin-polarized, generalized gradient approximation (GGA) DFT calculations. We also included the on-site electron correlation corrections using the Hubbard model (in the framework of the so-called DFT + U approach). We found that PuO2 remains semiconducting with He in the octahedral position while UO2 requires a specific lattice distortion. Both materials reveal a positive energy for He incorporation, which, therefore, is an exothermic process. The He incorporation energy increases with the Pu concentration in the MOX fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Photosensitivity of pSi-n(Si{sub 2}){sub 1–x–y}(Ge{sub 2}){sub x}(ZnSe){sub y} heterostructures with quantum dots

The spectral dependences of photosensitivity of pSi-n(Si{sub 2}){sub 1–x–y}(Ge{sub 2}){sub x}(ZnSe){sub y} heterostructures and structural features of epitaxial film of (Si{sub 2}){sub 1–x–y}(Ge{sub 2}){sub x}(ZnSe){sub y} solid solution were studied by atomic force microscopy. The peaks of sensitivity at photon energies of 1.60, 1.85, 2.40, and 2.54 eV due to ZnSe and Ge quantum dots in the solid solution layer were revealed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of cation substitution on the polymorphic transformation in Ag{sub 2–х}Cu{sub х}S (х = 0.45, 0.8, and 1.07) crystals

The influence of the concentration substitution of Ag ions for Cu ions in the structure of Ag{sub 2–х}Cu{sub х}S (х = 0.45, 0.8, and 1.07) solid solutions on the temperature of polymorphic phase transitions is demonstrated. The phase composition of Ag{sub 2–х}Cu{sub х}S (х = 0.45, 0.8, and 1.07) solid solutions has been investigated by X-ray diffraction at different temperatures. It is shown that the structure of the polymorphic modification of Ag{sub 0.93}Cu{sub 1.07}S composition and the phase transition temperature correspond to the structure and parameters of AgCuS single crystal. The structures of the modifications of compositions with a high silver concentration (Ag{sub 1.55}Cu{sub 0.45}S and Ag{sub 1.2}Cu{sub 0.8}S) and the phase transitions temperatures differ from the structure and corresponding parameters of AgCuS single crystal.

36 MATERIALS SCIENCE↗

Multiple Nonstoichiometric Phases with Discrete Composition Ranges in the CaAu 5 -CaAu 4 Bi-BiAu 2 System. A Case Study of the Chemistry of Spinodal Decomposition

Synthetic explorations in the CaAu 5 -CaAu 4 Bi-BiAu 2 system at 400 °C reveal five separate solid solution regions that show three distinct substitution patterns in the CaAu 5 parent: (I) CaAu 4 (Au 1-m Bi m ) with 0 ≤ m ≤ 0.15(1), (II) 0.33(1) ≤ m ≤ 0.64(1), (III) 0.85(4) ≤ m ≤ 0.90(2); (IV) (Ca 1-r Au r )Au 4 (Bi 1-s Au s ) with 0 ≤ r ≤ 0.39(1) and 0 ≤ s ≤ 0.12(2); (V) (Ca 1-p-q Au p Bi q )Au 4 Bi with 0.09(2) ≤ p ≤ 0.13(1) and 0.31(2) ≤ q ≤ 0.72(4). Single crystal X-ray studies establish that all of these phase regions have common cubic symmetry F43m and that their structures (MgCu 4 Sn-type, an ordered derivative of MgCu 2 ) all feature three-dimensional networks of Au 4 tetrahedra, in which the truncated tetrahedra are centered and capped by Ca/Au, Au/Bi, or Ca/Au/Bi mixtures to give 16-atom Friauf polyhedra. TB-LMTO-ASA and -COHP calculations also reveal that direct interactions between Ca-Au and Ca-Bi pairs of atoms are relatively weak and that the Bi-Au interactions in the unstable ideal CaAu 4 Bi are antibonding in character at E F but that their bonding is optimized at ±1 e. Compositions between the five nonstoichiometric phases appear to undergo spinodal decompositions. The last phenomenon has been confirmed by HRTEM, STEM-HAADF, EPMA, and XRD studies of the nominal composition CaAu 4.25 Bi 0.75 . In conclusion, its DTA analyses suggest that the phases resulting from spinodal decomposition have nearly the same melting point (~807 °C), as expected, and that they are interconvertible through peritectic reactions at ~717 °C.

36 MATERIALS SCIENCE↗

Investigation of the Structural Changes in Li[Ni y Mn y Co (1−2 y ) ]O 2 ( y = 0.05) upon Electrochemical Lithium Deintercalation †

A systematic study has been performed to investigate the structural changes of Li[Ni{sub 0.05}Mn{sub 0.05}Co{sub 0.90}]O{sub 2}, one member of the Li[Ni{sub y}Mn{sub y}Co{sub (1-2y)}]O{sub 2} series with low Ni/Mn content, upon electrochemical lithium deintercalation. X-ray diffraction (XRD), X-ray absorption near-edge spectroscopy (XANES), and nuclear magnetic resonance (NMR) measurements were performed, and the results from these experiments provided a detailed picture of the whole delithiation process. Oxidation of not only Ni{sup 2+}, but also some Co{sup 3+}, is seen in the beginning of Li extraction (less than 0.15 mol removed), the ions located closest to Mn{sup 4+} being extracted first. Further deintercalation (additional 0.2 mol of Li removal) induces an insulator to metal transition that is similar to that reported for LiCoO{sub 2}. However, this reaction follows a solid solution mechanism even for this low level of substitution, rather than the two-phase reaction reported for the Ni, Mn-free oxide. When half of the Li ions are extracted, the electrochemical signature for lithium vacancy ordering in the host framework is observed. The NMR results for deintercalation of more than 50% Li were compared to those for Li{sub x}CoO{sub 2} at similar stages of charge, which are reported here for the first time; they indicate that the behavior of these two phases at these potentials is very similar. When the batteries are charged to voltages higher than 4.6 V, very few lithium ions remain in the structure and the O3 to O1 phase transition occurs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Strengthening Mechanism on Strain-Rate Related Tensile Properties of Low-Carbon Sheet Steels for Automotive Application

In order to ensure crash resistance of the steels used in automotive components, the ensile deformation behavior needs to be studied and predicted not only under quasi-static condition, but also under dynamic loading rates. In the present study, tensile tests have been performed on four different automobile grade sheet steels, namely interstitial free steel, dual-phase 600 and 800, and a carbon manganese steel over the strain rate regime of 0.001-800/s. Apart from the variation in strength (which always increased with strain rate), the effect of strengthening mechanism on strain rate sensitivity and strain hardening behavior has been evaluated. Strain rate sensitivity was found to increase at high-strain rate regime for all the steels. Contribution of solid solution hardening on strain rate sensitivity at lower plastic strains was found to be higher compared to dislocation strengthening and second-phase hardening. However, precipitation hardening coupled with solid solution hardening produced the highest strain rate sensitivity, in C-Mn-440 steel at high strain rates. Different strain-rate-sensitive models which take into account the change in yield stress and strain hardening behavior with strain rate for ductile materials were used to predict the flow behavior of these sheet steels at strain rates up to 800/s.

36 MATERIALS SCIENCE↗

Tribological Behavior of Structural Materials in High Temperature Helium Gas-Cooled Reactor Environments

The High-Temperature Gas-cooled Reactor (HTGR) is a Generation IV concept designed to produce electricity and hydrogen at high efficiencies via high operating temperatures (700 °C or higher). Helium, the primary coolant for HTGRs, contains impurities (e.g., CO, H2O and CH4) that can induce corrosion reactions at high temperatures such as oxidation and (de)carburization, which in turn can affect the tribological behavior of components. Incoloy® 800HT (Ni-Fe-Cr austenitic solid-solution alloy) and Inconel® 617 (Ni-Cr-Co-Mo solid-solution alloy) are two high-temperature superalloys currently selected as candidate structural materials for the HTGR. The objective of this study is to evaluate the high-temperature tribological performance of these two candidate alloys after conditioning them in HTGR environments. Four regimes of corrosion were considered: a non-conditioned regime (Regime I), an oxidizing regime (Regime II), a carburizing and oxidizing regime (Regime III), and a carburizing regime (Regime IV). To simulate oxidation in HTGR, samples were conditioned for 22 days at elevated temperatures in a once-through helium loop with 4 ppmv H2O. Carburization of the samples was achieved by the commercial process, Kolsterising®. In addition, two surface treatments – shot peening and aluminization – were considered as potential routes of improving the alloys’ wear resistance. Surface-treated samples were tested both before and after conditioning in Regime II. Tribological testing of the samples was performed via a pin-on-disk tribometer at elevated temperatures in ambient environment – 650 and 750°C for 800HT; 850 and 900°C for 617 – with applied loads of 1N, 2N and 5N. The wear behavior of the alloys was assessed via wear volume and friction coefficient measurements, supported by morphological, structural and compositional analyses of the wear tracks. Conditioning the samples in Regime II led to the formation of a chromium oxide on both alloys. This protective scale increased the wear resistance compared to that of as-received samples (Regime I) due to the formation of a compacted ‘glaze’ oxide layer during sliding, rendering the wear track nearly undistinguishable from the unworn background and resulting in wear volumes below the detection limits of the measurement technique. The variability of the friction coefficients of the conditioned samples was also considerably reduced compared to that of the as-received samples due to the glaze layer. Additionally, the initial friction coefficients of the samples conditioned in Regime II were reduced by 45% and 54% compared to those of as-received samples for alloys 800HT and 617, respectively. Carburizing the samples (Regime IV) hardened the surfaces of both alloys and promoted the formation of an iron oxide on 800HT during tribological testing, thereby increasing the wear resistance and decreasing the initial friction coefficient by a factor of two compared to those of as-received 800HT. Alloy 617 exhibited an enhanced wear resistance but similar initial friction coefficient compared to those of as-received samples due to the increased surface hardness. The Mn-Cr oxide developed during Regime III conditioning of 800HT did not develop a glaze layer during tribotesting, even at lower loads. Thus, it was not as protective as the oxide produced during conditioning of Regime II samples, leading to lower wear resistance of 800HT in Regime III compared to that measured in the Regime II condition. 800HT benefited from the aluminization surface treatment, particularly before conditioning in Regime II, due to the promotion of a wear-resistant aluminum oxide layer during testing and the increase in surface hardness due to the presence of a FeAl intermetallic phase. The presence of this phase caused an order-of-magnitude reduction in wear volumes compared to those of as-received 800HT. Aluminization of 617 decreased its wear resistance, particularly after conditioning in Regime II, due to significant wear of the aluminum oxide via a ceramic wear mechanism. This aluminum oxide was removed during sliding, causing the wear volumes to increase by a factor of five compared to those of 617 conditioned in Regime II. Shot-peened 800HT exhibited a tribological behavior similar to that of as-received 800HT, despite an enhancement in the rate of chromium oxide formation. Shot-peened 800HT conditioned in Regime II showed lower wear resistance compared to that of 800HT conditioned in Regime II due to the poor adhesion between the oxide and the underlying metal, preventing the formation of the glaze layer during sliding. Shot peening of 617 increased its wear resistance at higher load, reducing worn volumes by 60% compared to that measured with as-received 617. Tribotesting of shot-peened 617 in Regime II revealed that the glaze-oxide layer was formed at every load, resulting in negligible wear, similar to what was observed from testing 617 after conditioning in Regime II. Overall, alloy 617 exhibited tribologically superior behavior compared to that of alloy 800HT, as demonstrated by its lower friction coefficients and its order-of-magnitude lower wear volumes when measurable.

36 MATERIALS SCIENCE↗

Internal friction sensitivity to precipitation in Al-12 wt% Mg alloy

Highlights: • Internal friction is sensible to semi coherent and non-coherent phases (β′ and β). • Internal friction is not enough sensible to coherent GP zones formation in Al-12 wt% Mg. • Appearance of two IF peaks is due to β′ and β phases formation and dissolution. - Abstract: In order to improve the understanding of the sensibility of the internal friction phenomena to different stages of precipitation in Al-Mg alloys, the ageing effect of a supersaturated solid solution on the Temperature Dependent Internal Friction (TDIF) spectra has been studied. The research showed that the dissolution of the β phase and the transfer of Mg atoms to a solid solution and the formation of β′ metastable phase have an effect on internal friction. Thus, it was proved that the precipitation or the dissolution of β phase plays an important role in the anelasticity of Al-Mg alloys. A detailed TDIF analysis revealed the sensibility of the internal friction technique to the formation of semi-coherent and non-coherent phases (β′ and β) but it is not sensitive enough to the formation of coherent phases (GP zones). Several observations on the nature and the shape of the precipitates are also discussed.

36 MATERIALS SCIENCE↗

Iron in carbonate containing AFm phases

One of the AFm phases in hydrated Portland cement is Ca{sub 3}(Al{sub x}Fe{sub 2} {sub -} {sub x})O{sub 6}.CaCO{sub 3}.nH{sub 2}O. It is based on hexagonal and platey structural elements and the interlayer structure incorporates CO{sub 3}{sup 2-}. The solid phases were experimentally synthesized and characterized by different techniques including X-ray techniques (XRD and EXAFS) and vibrational spectroscopy techniques (IR, Raman). Fe-monocarbonate (Fe-Mc) and Al-monocarbonate (Al-Mc) were found to be stable up to 50 {sup o}C, while Fe-hemicarbonate (Fe-Hc) was unstable with respect to Fe-Mc in the presence of calcite. Fe-Mc has a rhombohedral R3-barc symmetry which is different from the triclinic of the Al analogue. Both XRD and thermodynamic modelling of the liquid compositions indicated that Al-Mc and the Fe-Mc phases do not form solid solution. The solubility products were calculated experimentally at 20 {sup o}C and 50 {sup o}C. Under standards condition the solubility products and other thermodynamic parameters were estimated using temperature-solubility product extrapolation and found to be logK{sub S0} (Fe-Mc) = -34.59 {+-} 0.50, logK{sub S0} (Fe-Hc) = -30.83 {+-} 0.50 and logK{sub S0}(Al-Mc) = -31.32 {+-} 0.50.

36 MATERIALS SCIENCE↗

Nonequilibrium alloy formation in the immiscible Cu-Mo system studied by thermodynamic calculation and ion beam mixing

For the equilibrium immiscible Cu-Mo system characterized by a positive heat of formation (+19 kJ mol{sup -1}), thermodynamic calculation showed that by adding an adequate interfacial free energy, the Gibbs free energy of the Cu-Mo multilayered films could be elevated up to a higher level than the convex-shaped free energy curve of the amorphous phase and supersaturated solid solutions. Accordingly, ion beam mixing of the Cu-Mo multilayered samples did result in forming a unique amorphous phase with an alloy composition around 80 at. % Mo and two supersaturated solid solutions of fcc and bcc structures at around 27 at. % and 90 at. % Mo, respectively, matching well with the thermodynamic calculation.

36 MATERIALS SCIENCE↗

The formation of the complex manganites LnSr{sub 2}Mn{sub 2}O{sub 7} (Ln = La, Nd, Gd)

Graphical abstract: Display Omitted Highlights: ► Formation of the LnSr{sub 2}Mn{sub 2}O{sub 7} phases proceeds according to two different pathways. ► Cationic composition of the obtained phase depends on the formation pathway. ► Step-by-step synthesis allows obtaining single-phase material. ► Structure and magnetic properties of the single-phase NdSr{sub 2}Mn{sub 2}O{sub 7} were investigated. -- Abstract: The process of formation of the Ruddlesden–Popper phases LnSr{sub 2}Mn{sub 2}O{sub 7} (Ln = La, Nd, Gd) was investigated by means of X-ray diffraction, thermal analysis and microprobe analysis. Two parallel pathways were found for the reaction. The first one includes the formation of the intermediate K{sub 2}NiF{sub 4}-type compound by interaction of Sr{sub 7}Mn{sub 4}O{sub 15} and perovskite-type solid solution (Ln,Sr)MnO{sub 3}, while in the second one the K{sub 2}NiF{sub 4}-type intermediate is formed during the reaction of the same perovskite-type solid solution with the corresponding rare earth oxide. This result gives an explanation for the formation of two phases with slightly different cationic compositions. The kinetics of the reaction was investigated for both mechanisms resulting in determination of their relative contribution to the final composition. Pure NdSr{sub 2}Mn{sub 2}O{sub 7} was obtained using a step-by-step process according to the first mechanism, and the magnetic properties of this phase were investigated.

36 MATERIALS SCIENCE↗

Phase transition behavior for ZrW{sub 2-x}Mo{sub x}O{sub 8} compositions at elevated temperatures

A systematical study on cubic ZrW{sub 2-x}Mo{sub x}O{sub 8} (x=0.73, 0.53, 0.33, 0.11) solid solutions reveals that their temperature-dependent phase transition behaviors are related to the Mo fraction x. A phase diagram of cubic ZrW{sub 2-x}Mo{sub x}O{sub 8} solid solutions has been drawn over a wide temperature range (298-1473 K) on the basis of the temperature-dependent phase transition behaviors observed.

36 MATERIALS SCIENCE↗

Crystal Structure and Phase Relations of the R{sub 2}Fe{sub 14}B–Y{sub 2}Fe{sub 14}B (R = Nd and Pr) Systems

The phase relations in the R{sub 2}Fe{sub 14}B–Y{sub 2}Fe{sub 14}B (R = Nd and Pr) systems have been investigated by means of X-ray powder diffraction (XRD), differential thermal analysis (DTA), and scanning electron microscopy (SEM) equipped with energy-dispersive X-ray spectroscopy (EDS). Crystal structure parameters for all studied alloys (R{sub 1−x}Y{sub x}){sub 2}Fe{sub 14}B (R = Nd and Pr) have been determined by Rietveld refinements. Their structures are similar to that of the Nd{sub 2}Fe{sub 14}B phase with tetragonal structure (space group P4{sub 2}/mnm). The continuous solid solutions are formed in these systems. The lattice parameters and unit cell volumes of the (R{sub 1−x}Y{sub x}){sub 2}Fe{sub 14}B (R = Nd and Pr) solid solutions decrease gradually with increasing Y content. The DTA results present that the decomposition temperature of (R{sub 1−x}Y{sub x}){sub 2}Fe{sub 14}B (R = Nd and Pr) rises with x ranging from 0 to 1.0. The vertical sections of the R{sub 2}Fe{sub 14}B–Y{sub 2}Fe{sub 14}B (R = Nd and Pr) systems are presented in this work.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗