Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “smoothing techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Micromachined Silicon Waveguide Circuits

Rectangular waveguides are commonly used as circuit elements in remote-sensing heterodyne receivers at millimeter wavelengths. The advantages of waveguides are low loss and mechanical tunability. However, conventional machining techniques for waveguide components operating above a few hundred GHz are complicated and costly. Waveguides micromachined from silicon however would have several important advantages including low-cost; small size for very high frequency (submillimeter wave) operation; high dimensional accuracy (important for high-Q circuits); atomically smooth walls, thereby reducing rf losses; and the ability to integrate active and passive devices directly in the waveguide on thin membranes, thereby solving the traditional problem of mounting thin substrates.

Silicon Waveguide↗
NASA NTRS1959

Sampled-Data Techniques Applied to a Digital Controller for an Altitude Autopilot

Sampled-data theory, using the Z transformation, is applied to the design of a digital controller for an aircraft-altitude autopilot. Particular attention is focused on the sensitivity of the design to parameter variations and the abruptness of the response, that is, the normal acceleration required to carry out a transient maneuver. Consideration of these two characteristics of the system has shown that the finite settling time design method produces an unacceptable system, primarily because of the high sensitivity of the response to parameter variations, although abruptness can be controlled by increasing the sampling period. Also demonstrated is the importance of having well-damped poles or zeros if cancellation is attempted in the design methods. A different method of smoothing the response and obtaining a design which is not excessively sensitive is proposed, and examples are carried through to demonstrate the validity of the procedure. This method is based on design concepts of continuous systems, and it is shown that if no pole-zero cancellations are allowed in the design, one can obtain a response which is not too abrupt, is relatively insensitive to parameter variations, and is not sensitive to practical limits on control-surface rate. This particular design also has the simplest possible pulse transfer function for the digital controller. Simulation techniques and root loci are used for the verification of the design philosophy.

Schmidt, Stanley F.↗
DOE OSTI2019

Solving a trillion unknowns per second with HPGMG on Sunway TaihuLight

Benchmarks for supercomputers are important tools, not only for evaluating and ranking modern supercomputers, but also for providing hints for future architecture design. As a new benchmark, HPGMG (high performance geometric multigrid) solves a linear equation set with a full geometric multi-grid algorithm. It involves computation on different scales, data movement with various volumes, global communication and neighbor communication with both large and small messages, etc., and is more correlated to real world applications than traditional benchmarks such as LINPACK. Therefore, it is desirable to examine how well HPGMG can perform on leadership supercomputers such as Sunway Taihulight. Sunway Taihulight, the No. 1 supercomputer in the Top 500 list from June 2016 to June 2018, which uses a specially designed many-core architecture SW26010, is of great interest to the community of high performance computing. With careful analysis and code design, we came up with an efficient implementation of HPGMG on SW26010 processors. We not only employed traditional optimization techniques such as 2.5D partitioning, double buffering, and collective data load, but also introduced a micro-benchmark to help with the choice of optimization direction and parameter tuning. Another contribution is that we proposed a new procedure for the major operations, by granulating and reordering the smooth function and the ghost exchange operation, leading to reduced memory copy and accelerated communication process. Our optimized implementation of HPGMG on Sunway TaihuLight achieved a ground-breaking performance of 1.036 × 10 12 Degrees of Freedom per second at the finest level, which is No. 1 on the HPGMG list of Nov 2017.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Image segmentation for analyzing galaxy-galaxy strong lensing systems

The goal of this Letter is to develop a machine learning model to analyze the main gravitational lens and detect dark substructure (subhalos) within simulated images of strongly lensed galaxies. Using the technique of image segmentation, we turn the task of identifying subhalos into a classification problem, where we label each pixel in an image as coming from the main lens, a subhalo within a binned mass range, or neither. Our network is only trained on images with a single smooth lens and either zero or one subhalo near the Einstein ring. On an independent test set with lenses with large ellipticities, quadrupole and octopole moments, and for source apparent magnitudes between 17–25, the area of the main lens is recovered accurately. On average, only 1.3% of the true area is missed and 1.2% of the true area is added to another part of the lens. In addition, subhalos as light as 10 8.5 M ⊙ can be detected if they lie in bright pixels along the Einstein ring. Furthermore, the model is able to generalize to new contexts it has not been trained on, such as locating multiple subhalos with varying masses or more than one large smooth lens.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2013

Structural and photovoltaic properties of a-Si (SNc)/c-Si heterojunction fabricated by EBPVD technique

In last two decades sculptured thin films are very attractive for researches. Some properties of these thin films, like high porosity correspondingly high large surface area, controlled morphology; bring into prominence on them. Sculptured thin films have wide application areas as electronics, optics, mechanics, magnetic and chemistry. Slanted nano-columnar (SnC) thin films are a type of sculptured thin films. In this investigation SnC thin films were growth on n-type crystalline Si(100) and p-type crystalline Si(111) via ultra-high vacuum electron beam evaporation technique. The structural and morphological properties of the amorphous silicon thin films were investigated by XRD, Raman and FE-SEM analysis. According to the XRD and Raman analysis the structure of thin film was amorphous and FE-SEM analysis indicated slanted nano-columns were formed smoothly. Slanted nano-columns a-Si/c-Si heterojunction were prepared as using a photovoltaic device. In this regard we were researched photovoltaic properties of these heterojunction with current-voltage characterization under dark and illumination conditions. Electrical parameters were determined from the current-voltage characteristic in the dark conditions zero-bias barrier height Φ{sub B0} = 0.83−1.00eV; diode ideality factor η = 11.71−10.73; series resistance R{sub s} = 260−31.1 kΩ and shunt resistance R{sub sh} = 25.71−63.5 MΩ SnC a-Si/n-Si and SnC a-Si/p-Si heterojunctions shows a pretty good photovoltaic behavior about 10{sup 3}- 10{sup 4} times. The obtained photovoltaic parameters are such as short circuit current density J{sub sc} 83-40 mA/m{sup 2}, open circuit voltage V{sub oc} 900-831 mV.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Wet-Etching of Acoustically Spalled GaAs for Substrate Reuse

Acoustic spalling is a promising technique for substrate reuse in the fabrication of gallium arsenide (GaAs) photovoltaic cells. However, the acoustic spalling process can leave the substrate with areas of rough surface morphology that can interfere with subsequent cell growth and processing. In this work, we investigate the use of wet etchants to smooth the surface of acoustically spalled GaAs substrates. We evaluated six different etchants. Of those tested, an 8:1:1 mixture of sulfuric acid, hydrogen peroxide, and water at 30 degrees C and a moderate stirring rate showed the greatest roughness reduction per mass loss while producing the desired morphology. This etchant was then applied to an acoustically spalled 2-inch GaAs wafer. A single-junction GaAs cell was then grown via metalorganic vapor-phase epitaxy on this substrate, an acoustic spalled substrate without a smoothing etch, and an epi-ready substrate. Use of the 8:1:1 H2SO4:H2O2:H2O etchant produced cells an average efficiency of 12.8% as compared to that of 2.0% grown on the unetched acoustically spalled substrate and 16.3% grown on the epi-ready substrate. The results of this work demonstrate that wet etching is a viable method for smoothing the surface of spalled GaAs substrates, paving the way for substrate reuse via acoustic spalling at efficiencies that approach growth on epi-ready substrates.

etching↗
NASA NTRS1982

Turbulent boundary layer over solid and porous surfaces with small roughness

The wind tunnel models and instrumentation used as well as data reduction and error analysis techniques employed are described for an experimental study conducted to measure directly skin friction and obtain profiles of mean velocity, axial and normal turbulence intensity, and Reynolds stress in the untripped boundary on a large diameter axisymmetric body. Results are given for such a body with a (1) smooth, solid surface; (2) a sandpaper roughened, solid surface; (3) a sintered metal, porous surface; (4) a ""smooth'' performated titanium surface; (5) a rough, solid surface made of fine diffusion bonded screening; and (6) a rough, porous surface made of the same screening. The roughness values were in low range (k+ 5 to 7) just above what is normally considered ""hydraulically smooth''. Measurements were taken at several axial locations and tow or normal stream freestream velocities, 45.1 m/sec and 53.5 m/sec.

Kong, F. Y.↗
NASA NTRS1985

Lubrication of nonconformal contacts

Minimum film thickness results for piezoviscous-rigid regime of lubrication are developed for a compressible Newtonian fluid with Roelands viscosity. The results provide a basis for the analysis and design of a wide range of machine elements operating in the piezoviscous-rigid regime of lubrication. A new numerical method of calculating elastic deformation in contact stresses is developed using a biquadratic polynomial to approximate the pressure distribution on the whole domain analyzed. The deformation of every node is expressed as a linear combination of the nodal pressures whose coefficients can be combined into an influence coefficient matrix. This approach has the advantages of improved numerical accuracy, less computing time and smaller storage size required for influence matrix. The ideal elastohydrodynamic lubrication is extended to real bearing systems in order to gain an understanding of failure mechanisms in machine elements. The improved elastic deformation calculation is successfully incorporated into the EHL numerical scheme. Using this revised numerical technique and the flow factor model developed by Patir and Cheng (1978) the surface roughness effects on the elastohydrodynamic lubrication of point contact is considered. Conditions typical of an EHL contact in the piezoviscous-elastic regime entrained in pure rolling are investigated. Results are compared with the smooth surface solutions. Experiments are conducted to study the transient EHL effects in instrument ball bearings.

Jeng, Y. R.↗
NASA NTRS1993

Experimentally reproduced relict enstatite in porphyritic chondrules of enstatite chondrite composition

Experiments are presented that test a model for the origin of porphyritic pyroxene (PP) chondrules in enstatite chondrites that contain phenocrysts of enstatite with blue cathodoluminescence (CL) set in a matrix of radial, dendritic enstatite with red CL. Established one-atmosphere, gas-mixing techniques were used. Relict enstatite phenocrysts with blue CL in a matrix of coarsely radial to dendritic enstatite with red CL were successfully produced. The relict crystals are preserved in runs with a melt time of 36 minutes or less at 1537 C. The relicts remain angular with smooth crystal/melt interfaces, and thus melting has occurred uniformly. Partial melting does occur along fractures produced when the blue CL enstatite was initially grown and cooled through the proto/ortho enstatite transition with the attendent volume change. There is either reaction with the melt and diffusion of Mn and Cr into the blue CL En, or there is an overgrowth of red CL En along the fractures. The bulk of the relicts remain blue. The melt enclosing the relicts crystalized to a coarsely radial to dendritic to micro porphyritic texture comprised of enstatite that has a bright red CL with decreasing melt time. The blue CL En has Mn and Cr contents at or below detection limits of the electron probe as described in earlier studies and in natural blue CL En. In the red CL En in this study, the Mn, Al2O3, and Cr are at previously observed levels and the levels change rapidly.

Lofgren, Gary E.↗
NASA NTRS2015

Conflict Detection Performance Analysis for Function Allocation Using Time-Shifted Recorded Traffic Data

The performance of the conflict detection function in a separation assurance system is dependent on the content and quality of the data available to perform that function. Specifically, data quality and data content available to the conflict detection function have a direct impact on the accuracy of the prediction of an aircraft's future state or trajectory, which, in turn, impacts the ability to successfully anticipate potential losses of separation (detect future conflicts). Consequently, other separation assurance functions that rely on the conflict detection function - namely, conflict resolution - are prone to negative performance impacts. The many possible allocations and implementations of the conflict detection function between centralized and distributed systems drive the need to understand the key relationships that impact conflict detection performance, with respect to differences in data available. This paper presents the preliminary results of an analysis technique developed to investigate the impacts of data quality and data content on conflict detection performance. Flight track data recorded from a day of the National Airspace System is time-shifted to create conflicts not present in the un-shifted data. A methodology is used to smooth and filter the recorded data to eliminate sensor fusion noise, data drop-outs and other anomalies in the data. The metrics used to characterize conflict detection performance are presented and a set of preliminary results is discussed.

Guerreiro, Nelson M.↗
DOE OSTI2019

Relative particle yield fluctuations in Pb-Pb collisions at $\sqrt{s_\mathrm{{NN}}} =2.76\hbox { TeV}$

First results on K/$\pi$, p/$\pi$ and K/p fluctuations are obtained with the ALICE detector at the CERN LHC as a function of centrality in Pb-Pb collisions at $\sqrt{s_\mathrm{{NN}}} =2.76\hbox { TeV}$. The observable ν dyn , which is defined in terms of the moments of particle multiplicity distributions, is used to quantify the magnitude of dynamical fluctuations of relative particle yields and also provides insight into the correlation between particle pairs. This study is based on a novel experimental technique, called the Identity Method, which allows one to measure the moments of multiplicity distributions in case of incomplete particle identification. The results for p/$\pi$ show a change of sign in ν dyn from positive to negative towards more peripheral collisions. For central collisions, the results follow the smooth trend of the data at lower energies and ν dyn exhibits a change in sign for p/$\pi$ and K/p.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1974

Boundary-layer transition on a plate subjected to simultaneous spanwise and chordwise pressure gradients

The boundary-layer transition on a short plate was studied by means of the china-clay visual technique. The plate model was mounted in a wind tunnel so that it was subjected to small simultaneous spanwise and chordwise pressure gradients. Results of the experimental study, which was performed at three subsonic velocities, indicated that the transition pattern was appreciably curved in the spanwise direction but quite smooth and well behaved. Reasonable comparisons between predictions of transition and experiment were obtained from two finite-difference two-dimensional boundary-layer calculation methods which incorporated transition models based on the concept of a transition intermittency factor.

Boldman, D. R.↗
NASA NTRS1990

Recognition of 3-D symmetric objects from range images in automated assembly tasks

A new technique is presented for the three dimensional recognition of symmetric objects from range images. Beginning from the implicit representation of quadrics, a set of ten coefficients is determined for symmetric objects like spheres, cones, cylinders, ellipsoids, and parallelepipeds. Instead of using these ten coefficients trying to fit them to smooth surfaces (patches) based on the traditional way of determining curvatures, a new approach based on two dimensional geometry is used. For each symmetric object, a unique set of two dimensional curves is obtained from the various angles at which the object is intersected with a plane. Using the same ten coefficients obtained earlier and based on the discriminant method, each of these curves is classified as a parabola, circle, ellipse, or hyperbola. Each symmetric object is found to possess a unique set of these two dimensional curves whereby it can be differentiated from the others. It is shown that instead of using the three dimensional discriminant which involves evaluation of the rank of its matrix, it is sufficient to use the two dimensional discriminant which only requires three arithmetic operations.

Alvertos, Nicolas↗
NASA NTRS1944

Compressibility Effects on Heat Transfer and Pressure Drop in Smooth Cylindrical Tubes

An analysis is made to simplify pressure-drop calculations for nonadiabatic and adiabatic friction flow of air in smooth cylindrical tubes when the density changes due to heat transfer and pressure drop are appreciable. Solutions of the equation of motion are obtained by the use of Reynolds' analogy between heat transfer and skin friction. Charts of the solutions are presented for making pressure-drop calculations. A technique of using the charts to determine the position of a normal shock in a tube is described.

AIR FLOW - TUBES, CYLINDRICAL↗
NASA NTRS1998

Grid Generation Techniques Utilizing the Volume Grid Manipulator

This paper presents grid generation techniques available in the Volume Grid Manipulation (VGM) code. The VGM code is designed to manipulate existing line, surface and volume grids to improve the quality of the data. It embodies an easy to read rich language of commands that enables such alterations as topology changes, grid adaption and smoothing. Additionally, the VGM code can be used to construct simplified straight lines, splines, and conic sections which are common curves used in the generation and manipulation of points, lines, surfaces and volumes (i.e., grid data). These simple geometric curves are essential in the construction of domain discretizations for computational fluid dynamic simulations. By comparison to previously established methods of generating these curves interactively, the VGM code provides control of slope continuity and grid point-to-point stretchings as well as quick changes in the controlling parameters. The VGM code offers the capability to couple the generation of these geometries with an extensive manipulation methodology in a scripting language. The scripting language allows parametric studies of a vehicle geometry to be efficiently performed to evaluate favorable trends in the design process. As examples of the powerful capabilities of the VGM code, a wake flow field domain will be appended to an existing X33 Venturestar volume grid; negative volumes resulting from grid expansions to enable flow field capture on a simple geometry, will be corrected; and geometrical changes to a vehicle component of the X33 Venturestar will be shown.

Alter, Stephen J.↗
NASA NTRS2023

A Technique to Measure Coronal Electron Density, Temperature, and Velocity Above 2.5 R⨀ from Sun Center using Polarized Brightness Spectrum

The current model for the polarized brightness (pB) spectrum has a decades-long history of progressively incorporating its dependence on electron density Ne, temperature Te, and flow velocity in the radial direction V e . The pB N e spectrum follows the exact shape of the photosphere spectrum, which is not smooth, which is expected from the thermal Doppler broadening of the photosphere spectrum due to the high coronal T e ; the pB N e T e spectrum is smooth, but the free coronal electrons remain static and unaffected by solar wind, and the pB N e T e V e spectrum is red-shifted by electrons seeing a red-shifted photosphere spectrum as they flow away from the Sun as solar wind, which takes a radial direction above 2.5 R ⨀ from Sun center. In this article, we review the progress of the above three model pB spectra in describing the observations and highlight the differences, first by comparing the three model pB spectra against wavelength using a model for Ne and constant values for T e and V e , and second by generating three model 2D pB maps by integrating over a selected wavelengthregion in the three model pB spectra along lines of sight passing through the 14 July 2000 (“Bastille Day”) coronal mass ejection (CME) model, which contains 3D information on N e , T e , and V e . In this regard, the COronal Diagnostic EXperiment (CODEX) on the International Space Station (ISS) in 2024 will measure N e , T e , and V e by matching the measured pB with modeled pB N e T e V e in selected wavelength regions using multiple filters.

Electron density↗
NASA NTRS2023

A Technique to Measure Coronal Electron Density, Temperature, and Velocity Above 2.5 R from Sun Center Using Polarized Brightness Spectrum

The current model for the polarized brightness (pB) spectrum has a decades-long history of progressively incorporating its dependence on electron density N(e), temperature T(e), and flow velocity in the radial direction V(e). The pBNe spectrum follows the exact shape of the photosphere spectrum, which is not smooth, which is expected from the thermal Doppler broadening of the photosphere spectrum due to the high coronal T(e). The pBN(e) spectrum is smooth, but the free coronal electrons remain static and unaffected by solar wind, and the pBN(e)T(e)V(e) spectrum is red-shifted by electrons seeing a red-shifted photosphere spectrum as they flow away from the Sun as solar wind, which takes a radial direction above 2.5 R from Sun center. In this article, we review the progress of the above three model pB spectra in describing the observations and highlight the differences, first by comparing the three model pB spectra against wavelength using a model for Ne and constant values for T(e) and V (e), and second by generating three model 2D pB maps by integrating over a selected wavelength region in the three model pB spectra along lines of sight passing through the 14 July 2000 (“Bastille Day”) coronal mass ejection (CME) model, which contains 3D information on N(e), T(e), and V e. In this regard, the COronal Diagnostic EXperiment (CODEX) on the International Space Station (ISS) in 2024 will measure N(e), T(e), and V(e) by matching the measured pB with modeled pBN(e)T(e)V(e) in selected wavelength regions using multiple filters.

Electron density↗
DOE OSTI2020

A phase transition model and temporal logic specifications for smart energy systems - revisited

In this paper, we revisit the method of a phase transition model for representing hybrid systems and temporal logic specifications (TLSs) for specifying desired behaviors of systems, and discuss their usefulness for smart energy systems. On the one hand, the phase transition model incorporates the continuous model of the relay device action with a particular structural form that allows for the construction of a single, global differential-algebraic equation for hybrid systems (thus smoothed hybrid systems). On the other hand, the TLS allows sophisticated descriptions of control specifications addressing both magnitude and time simultaneously, which has recently been applied to the control strategy of several types of continuous and hybrid systems. We provide high-level descriptions of each of the two techniques and present simulation results in the context of smart energy systems.

Park, Byungkwon↗