Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “repeatability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Correlation between convection electric fields in the nightside magnetosphere and several wave and particle phenomena during two isolated substorms.

Correlation of several magnetoionospheric wave and particle phenomena previously linked observationally to magnetospheric substorms and inferred to involve convection electric fields with whistler measurements of convection activity during two relatively isolated substorms. The events occurred at about 0600 UT on July 15, 1965, and about 0500 UT on Oct. 13, 1965. The correlated phenomena include cross-L inward plasma drifts near midnight within the plasmaphere, diffuse auroral radar echoes observed near the dusk meridian, IPDP micropulsations (intervals of pulsations of diminishing period) in the premidnight sector, apparent contractions and expansions of the plasma sheet at about 20 earth radii in the magnetotail, and Pc 1/Pi 1 micropulsation events near or before midnight. Two new vlf phenomena occurred during the October 13 event - a noise band within the plasmasphere associated with a convecting whistler path, and ?hisslers,' falling-tone auroral-hiss forms repeated at intervals of about 2 sec.

Carpenter, D. L.↗

NASA earth resources satellite research and development program.

The NASA Earth Resources Survey (ERS) Program is discussed as an effort to augment the presently used ground techniques and limited aerial photography for obtaining larger survey data. The topics include the scientific and technological aspects of remote earth resources sensing, the past and present activities in this field, the immediate plans for the implementation of the program, and a summary of current and future international participation in it. The effective target areas of space observations under the program are listed as synoptic surveys, agriculture and forestry, geography, geology and mineral resources, hydrology and water resources, and marine resources. Acquisition of near real-time information, reduced data acquisition time, repeated coverage, measurement uniformity, global surveys without large on-site support requirements are indicated as the advantages of space observations.

Jaffe, L.↗

Moonquakes.

Although the average rate of seismic energy release within the moon appears to be far below that of the earth, over 100 events believed to be moonquakes have been recorded by the two seismic stations installed on the lunar surface during Apollo missions 12 and 14. With few exceptions, the moonquakes occur at monthly intervals near times of perigee and apogee and show correlations with the longer-term (7-month) lunar gravity variations. The repeating moonquakes are believed to occur at not less than 10 different locations. However, a single focal zone accounts for 80 per cent of the total seismic energy detected. This active zone appears to be 600 kilometers south-southwest of the Apollo 12 and 14 sites and deep within the moon. Each focal zone must be small (less than 10 kilometers in linear dimension) and fixed in location over a 14-month period. Cumulative strain at each location is inferred. Thus, the moonquakes appear to be releasing internal strain of unknown origin, the release being triggered by tidal stresses.

Latham, G.↗

Crystal structure of alpha poly-p-xylylene.

A crystal structure of alpha poly-p-xylylene is proposed with the help of data of oriented crystals grown during polymerization. The unit cell is monoclinic with the parameters a = 8.57 A, b = 10.62 A, c = 6.54 A (chain axis), and beta = 101.3 deg. Four repeating units per cell lead to a calculated density of 1.185 g/cu cm and a packing density of 0.71. The probable space group is P2 sub 1/m.

Kubo, S.↗

Results of scatterometer systems analysis for NASA/MSC Earth Observation Sensor Evaluation Program.

Radar scatterometers have applications in the NASA/MSC Earth Observation Aircraft Program. Over a period of several years, several missions have been flown over both land and ocean. In this paper a system evaluation of the NASA/MSC 13.3-GHz Scatterometer System is presented. The effects of phase error between the Scatterometer channels, antenna pattern deviations, aircraft attitude deviations, environmental changes, and other related factors such as processing errors, system repeatability, and propeller modulation, were established. Furthermore, the reduction in system errors and calibration improvement was investigated by taking into account these parameter deviations. Typical scatterometer data samples are presented.

Krishen, K.↗

Deep-body temperature changes in rats exposed to chronic centrifugation.

Deep-body temperature was monitored continuously by implant biotelemetry in unrestrained rats before, during, and after exposure to prolonged and almost continuous centrifugation. Rats subjected to centrifugation for the first time at various G loads ranging up to 2.5 G show a rapid and significant fall in temperature which is sustained below normal levels for periods as long as 3 days. The magnitude of the temperature fall and the recovery time were generally proportional to the G load imposed. The initial fall and recovery of body temperature closely parallels the decrease in food consumption and to a lesser degree the decrease in body mass experienced by centrifuged rats. After exposure to 2 weeks of centrifugation, rats show either no change or only a small transient increase in temperature when decelerated to a lower G level or when returned to normal gravity. Rats repeatedly exposed to centrifugation consistently showed a smaller temperature response compared to the initial exposure. Implant temperature biotelemetry has been found to be a sensitive, reliable, and extremely useful technique for assessing the initial stress of centrifugation and in monitoring the time course of recovery and acclimation of rats to increase as well as*decrease G.

Oyama, J.↗

Thermal excursion can cause bond problems.

The purpose of this paper is to illustrate the failure mode caused by thermal deformation and how thermal deformation affects bond integrity. Wege bonding in small-signal transistors, microcircuits and LSI circuits is the subject of this work. Repeated switching of the devices between high and low power at a rate that allows thermal expansion and contraction in the interconnecting wire causes the wire to flex at the point of reduced cross-sectional area until finally the wire breaks due to metal fatigue. It was observed that the thermal deformation was related to many factors such as device power dissipation, current density in the wire, wi *e dress and length, thermal time constant and frequency of operation.

Nowakowski, M. F.↗

Arterial and grooved cryogenic heat pipes.

Tests were conducted on two cryogenic heat pipes using nitrogen as the working fluid. Both pipes are 1.27 cm in diameter. The first pipe is 141 cm long and uses longitudinal grooves in the aluminum wall as the wick structure. The second pipe is 91 cm long and has an arterial wick adjacent to the wall. In addition, circumferential screw threads are machined along the entire length of the inside pipe wall. Both heat pipes primed with no difficulty in the horizontal position. Start-up after burn-out was obtained repeatedly. However, more testing is required to determine whether the artery pipe is as reliable as the grooved pipe with respect to priming. Once primed, the artery heat pipe is much less sensitive to elevation than the grooved design and, consequently, offers a significant advantage with respect to ground testing. Heat-transfer characteristics of the two pipes were comparable, with both pipes achieving the initial goal of 1000 watt-cm of heat-transport capability.

Brennan, P.↗

Venus - Topography revealed by radar data.

Surface height variations over the entire equatorial region on Venus have been estimated from extended series of measurements of interplanetary radar echo delays. Most notable is a mountainous section of about 3-kilometer peak height located at a longitude of 100 degrees (International Astronomical Union coordinate system). The eastern edge has an average inclination of about 0.5 degrees, which is unusually steep for a large-scale slope on Venus. The resolution of the radar measurements along the surface of Venus varied between about 200 and 400 kilometers with a repeatability in altitude determination generally between 200 and 500 meters. The mean equatorial radius was found to be 6050.0 plus or minus 0.5 kilometers.

Campbell, D. B.↗

Measured losses in superconductor magnets for 60-Hertz ac operation.

Results of an experimental study of electrical losses in superconductor magnets. Preliminary 60-Hz ac loss data are presented for coils constructed of Nb3Sn ribbon, Nb-Ti cable, and multifilament Nb-Ti. Losses have been measured for different size coils up to approximately 20 cm in diameter. Of the conductor types tested, Nb3Sn ribbon has the lowest losses for ac operation. In Nb3Sn-ribbon coils of different sizes, the loss per unit length of conductor is shown to decrease with a decrease in the rate of change of current and to increase, in general, with increase in coil size. An important aspect of the study is the high degree of repeatability of the data.

Hamlet, I. L.↗

Effect of bedrest and positive radial acceleration upon peripheral visual response time.

Attempt to determine if peripheral visual response time (RT) could be used as a reliable advanced predictor of +G sub z-related blackout or grayout. The relatively high luminance of the peripheral stimuli used in the experiments may account for the finding that peripheral RT was not sensitive to impending blackout or grayout. The relatively consistent mean RTs within subjects across test days in bed is probably due to the relatively constant response characteristics of the retina and to the high repeatability of the stimuli.

Haines, R. F.↗

Reversed creep deformation behavior of metals.

It is shown that the creep deformation resistance of a variety of metals is reduced by repeated reversed deformation at temperatures above 0.4 Tm, where Tm is the absolute melting temperature of each metal. The reduction of creep deformation resistance due to stress reversals is most prominent at approximately 0.5 Tm where the average creep rate may increase by as much as a factor of twenty due to 50-100 stress reversals. Metallographic studies show that the observed acceleration of creep at high temperatures is in part due to the enhancement of grain boundary sliding as a result of gradual grain boundary migration toward planes of maximum shear stress during reversed creep deformation.

Morrow, J.↗

Experimental and theoretical studies on collision-broadened lines in the nu-4 fundamental of methane.

High-resolution experimental and theoretical studies performed earlier by us on the collision-broadened rotational lines in the nu-3 and 2nu-3 bands of methane have been repeated on the lines in the nu-4 fundamental of the molecule. Line-width measurements and computations, as well as line-shape measurements, indicate that the significant differences which exist between the rotational term values of the nu-3 and nu-4 vibrational levels have no observable effect on the collision-broadening mechanism. Using the predictions of line-widths, based on the Anderson-Tsao-Curnutte theory in the extended version of Tejwani for octopolar molecules, the theoretical dependence of line-widths on temperature has been calculated for CH4-CH4, CH4-H2 and CH4-He collisions.

Varanasi, P.↗

Temperature compensation of light emitting diodes and photodiodes.

Improved temperature compensation of the output from a GaAs LED can be obtained by connecting the diode in series with the emitter of an n-p-n transistor whose base circuit incorporates a high-gain operational amplifier and a parallel thermistor-resistor network. The temperature dependence of several photodiodes is also reported along with a practical temperature compensation scheme. Finally, the temperature compensation of a photon coupled pair consisting of a GaAs LED and a silicon photodiode is described. The combination provides a stability, linearity, and repeatability of about 1% over the upper 60% of the LED forward current range in the temperature interval from 15 to 45 C.

Burrous, C. N.↗

Simulation of the 'negative temperature' instability for line vortices.

In previous numerical solution to the continuum Navier-Stokes equations, a 'negative temperature' instability for the two-dimensional motions of interacting line vortices was observed. The experiment is repeated for a discrete vortex model, thus obtaining a numerical simulation of the 'negative temperature' instability for a large number of discrete line vortices. Typical results which are shown, are thought to lie above and below the energy threshold for negative temperature instability.

Joyce, G.↗

Evidence for spatially independent outbursts in compact radio sources.

Observations of the 7.8-GHz flux-density variations of 3C 120 suggest that the apparent superrelativistic expansion of this source and others can be explained as being due to independent spatially separated radio outbursts. If confirmed, this result would establish that the energy generated in quasi-stellar sources is released in many separate independent outbursts rather than by repeated eruptions in a single supermassive object.

Dent, W. A.↗

Moonquakes and lunar tectonism.

Review of the major discoveries that have resulted to date from the analysis of seismic data from a network of geophysical stations on the moon. It is found that lunar seismic signals differ greatly from typical terrestrial seismic signals; the moon possesses a crust and a mantle, at least in the region of the Apollo 12 and 14 stations; natural lunar events detected by the Apollo seismic network are moonquakes and meteoroid impacts; and in addition to the repeating moonquakes, moonquake 'swarms' have been discovered.

Latham, G.↗

The use of infrared absorption to determine density of liquid hydrogen.

Experimental evaluation of the use of infrared absorption for determining the density of liquid hydrogen, and discussion of the feasibility of an airborne densitometer based on this concept. The results indicate that infrared absorption of liquid hydrogen is highly sensitive to the density of hydrogen, and, under the operating limitations of the equipment and experimental techniques used, the determined values proved to be repeatable to an accuracy of 2.7%. The desiderata and limitations of an in-flight density-determining device are outlined, and some of the feasibility problems are defined.

Unland, H. D.↗