Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “redundancy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

A small helium-cooled infrared telescope for Spacelab 2

A helium cooled telescope of 15 cm aperture is being designed and constructed jointly by the University of Arizona, the Smithsonian Astrophysical Observatory and the Marshall Space Flight Center for high sensitivity infrared astronomical observations from Spacelab 2. A focal plane array of ten detectors provide a total field of view of 3 deg and cover the wavelength regions 4.5-8.5, 6-7, 9-16, 18-30 and 80-120 microns. A highly redundant all sky survey will be conducted by repeated scanning of the sky during many orbits of the spacecraft. High redundancy will allow discrimination among variable and constant celestial sources and several types of variable nearby sources. The principal astronomical result of the survey will be the absolute flux measurement of low surface brightness, large scale celestial infrared emissions but it will also extend existing IR sky surveys by a factor of 10 in point source sensitivity. The experiment will also make significant engineering measurements of contaminants in the Shuttle environment, test the technology of storage and utilization of large quantities of superfluid helium in space and test mechanical designs for future infrared telescopes for the Space Shuttle.

Gautier, T. N., III↗

On reliable control system designs with and without feedback reconfigurations

This paper contains an overview of a theoretical framework for the design of reliable multivariable control systems, with special emphasis on actuator failures and necessary actuator redundancy levels. Using a linear model of the system, with Markovian failure probabilities and quadratic performance index, an optimal stochastic control problem is posed and solved. The solution requires the iteration of a set of highly coupled Riccati-like matrix difference equations; if these converge one has a reliable design; if they diverge, the design is unreliable, and the system design cannot be stabilized. In addition, it is shown that the existence of a stabilizing constant feedback gain and the reliability of its implementation is equivalent to the convergence properties of a set of coupled Riccati-like matrix difference equations. In summary, these results can be used for offline studies relating the open loop dynamics, required performance, actuator mean time to failure, and functional or identical actuator redundancy, with and without feedback gain reconfiguration strategies.

Birdwell, J. D.↗

Orbit transfer vehicle engine study, phase A extension. Volume 1: Executive summary

A 1980 state-of-the-art advanced expander engine was configured that delivers near-optimum payload-performance and exhibits the simplicity reliability, and life characteristics required of the OTV mission. Engine optimization studies indicate that the performance of the conventional expander cycle engine can be improved substantially through combustion chamber surface area enhancement, thermal enhancement, turbine regeneration, and power cycle efficiency enhancement procedures. The 20K lb. thrust staged combustion engine can be adapted to operate at extended periods in the 1 to 2K lb. thrust regime. The study results indicate that long-life, high performnce operation in the low thrust mode can be achieved with minimum modifications (kitting) of the engine. Although the main contribution to mission success and crew safety stems from propulsion system redundancy, significant reliability can be gained from engine component redundancy, specific engine design features ensuring safety and reliability, including an engine health monitoring system, and from a total program approach to safety and reliability, such as that presently applied to the space shuttle.

Source record↗

Distributed microprocessors in a tactical universal modem

The distributed microprocessor system associated with a wideband signal conversion unit (WBSCU) is described. Multiple embedded 8086 and 2901 microprocessors, supported by dedicated hardware modules, perform the required real time operations for both transmit and receive functions. Commands from a host computer determine the configuration of the WBSCU via the IEEE 488 bus. Each of the four WBSCU channels is assigned to process a specified IF waveform; each channel configures its own resources and, in some cases, borrows resources from other channels. The processed waveform data is communicated from individual channels to redundant global memories. Data flow between the user community and global memories occurs via redundant 1553 buses through intelligent Bus Interface Units. Each WBSCU channel contains one 2901 bit slice machine and one 8086 microprocessor. The 2901 provides high speed processing capability for the most time critical operations. The 8086 is used for lower speed processing tasks where its high level language capability can be better exploited. Each 8086 has a global bus for wideband interprocessor communication, and a local bus for 8086/2901, master/slave communication. Software architecture consists of a control and communications structure governing mode dependent signal processing tasks.

Gray, D. M.↗

Propulsion controls

Increased system requirements and functional integration with the aircraft have placed an increased demand on control system capability and reliability. To provide these at an affordable cost and weight and because of the rapid advances in electronic technology, hydromechanical systems are being phased out in favor of digital electronic systems. The transition is expected to be orderly from electronic trimming of hydromechanical controls to full authority digital electronic control. Future propulsion system controls will be highly reliable full authority digital electronic with selected component and circuit redundancy to provide the required safety and reliability. Redundancy may include a complete backup control of a different technology for single engine applications. The propulsion control will be required to communicate rapidly with the various flight and fire control avionics as part of an integrated control concept.

Harkney, R. D.↗

Fault-tolerant computer study

A set of building block circuits is described which can be used with commercially available microprocessors and memories to implement fault tolerant distributed computer systems. Each building block circuit is intended for VLSI implementation as a single chip. Several building blocks and associated processor and memory chips form a self checking computer module with self contained input output and interfaces to redundant communications buses. Fault tolerance is achieved by connecting self checking computer modules into a redundant network in which backup buses and computer modules are provided to circumvent failures. The requirements and design methodology which led to the definition of the building block circuits are discussed.

Rennels, D. A.↗

Documentation for the machine-readable character coded version of the SKYMAP catalogue

The SKYMAP catalogue is a compilation of astronomical data prepared primarily for purposes of attitude guidance for satellites. In addition to the SKYMAP Master Catalogue data base, a software package of data base management and utility programs is available. The tape version of the SKYMAP Catalogue, as received by the Astronomical Data Center (ADC), contains logical records consisting of a combination of binary and EBCDIC data. Certain character coded data in each record are redundant in that the same data are present in binary form. In order to facilitate wider use of all SKYMAP data by the astronomical community, a formatted (character) version was prepared by eliminating all redundant character data and converting all binary data to character form. The character version of the catalogue is described. The document is intended to fully describe the formatted tape so that users can process the data problems and guess work; it should be distributed with any character version of the catalogue.

Warren, W. H., Jr.↗

Inertial measurement unit pre-processors and post-flight STS-1 comparisons

The flight results show that the relative tri-redundant Inertial Measurement Unit IMU performance throughout the entire entry flight was within the expected accuracy. Comparisons are presented which show differences in the accumulated sensed velocity changes as measured by the tri-redundant IMUs (in Mean Equator and Equinox of 1950.0), differences in the equivalent inertial Euler angles as measured with respect to the M50 system, and finally, preliminary instrument calibrations determined relative to the ensemble average measurement set. Also, differences in the derived body axes rates and accelerations are presented. Because of the excellent performance of the IMUs during the STS-1 entry, the selection as to which particular IMU would best serve as the dynamic data source for entry reconstruction is arbitrary.

Findlay, J. T.↗

A modified adaptive delta modulator

This paper presents the results of a study in data compression of adaptive delta modulated video signals. The Song mode ADM is first investigated at a sampling rate of 16 Mbits/s and shown not to produce enough redundancy to warrant entropy encoding. A modified adaptive delta modulator algorithm is presented that operates at a sampling rate of 16 Mbits/s and does produce sufficient redundancy to yield a 40-50 percent data compression by using a simple code on 4 bit data blocks. Other techniques such as field interpolation and direct substitution are shown to increase the possible data compression further without noticeable degradation in the two input images used in this investigation. The effects of channel errors in the transmission of packet video over a computer network are considered. A leaky integrator is used to reduce the effects of channel errors in the data bits. It is shown that the effects of channel errors can be reduced by field interpolating those packets that can be shown to contain errors.

Barba, J.↗

The Shuttle inertial system

The Space Shuttle inertial system is built around a sensor assembly called the inertial measurement unit (IMU). The system includes a redundant set of three structurally integrated IMU's that operate in conjunction with parallel strung data system computers to provide precise attitude and velocity information to user system functions. The inertial system is actually a separate subsystem function integrated into the overall avionics system. Software resident in the system computers is the final link in the inertial system. The inertial software is comprised of two major sets, including a subsystem operating program (SOP) called the IMU SOP and redundancy management. Attention is given to system applications, systems performance, attitude sensitivities, the IMU platform, IMU thermal management, aspects of IMU calibration, and Shuttle program experience.

Swingle, W. L.↗

The CARE 3 Phase 3 Report: Test and Evaluation

CARE 3 (Computer-Aided Reliability Estimation, version three) is a computer program designed to help estimate the reliability of complex, redundant systems; although the program can model a wide variety of redundant structures, it was developed specifically for fault-tolerant avionics systems, systems distinguished by the need for extremely reliable performance since a system failure could well result in the loss of human life. CARE 3 further generalizes the class of system structures that can be modeled and greatly expands the coverage model to take into account such effects as intermittent and transient faults, latent faults, error propagation, etc. The initial test and evaluation of CARE 3 are reported.

Stiffler, J. J.↗

CARE 3 phase 2 report - mathematical description

CARE III (Computer-Aided Reliability Estimation, version three) a computer program designed to help estimate the reliability of complex, redundant systems is described. Although the program can model a wide variety of redundant structures, it was developed specifically for fault tolerant avionics systems. CARE III generalizes the class of system structures that can be modeled and greatly expands the coverage model to take into account such effects as intermittent and transient faults, latent faults, and error propagation.

Stiffler, J. J.↗

Data base systems in electronic design engineering

The concepts of an integrated design data base system (DBMS) as it might apply to an electronic design company are discussed. Data elements of documentation, project specifications, project tracking, firmware, software, electronic and mechanical design can be integrated and managed through a single DBMS. Combining the attributes of a DBMS data handler with specialized systems and functional data can provide users with maximum flexibility, reduced redundancy, and increased overall systems performance. Although some system overhead is lost due to redundancy in transitory data, it is believed the combination of the two data types is advisable rather than trying to do all data handling through a single DBMS.

Williams, D.↗

A broadbased actuator concept for spaceflight application

An electromechanical actuator is applicable to a variety of spaceflight requirements. Characterized by high torque and a small output step angle, the device is comprised of a coaxial, symmetrical arrangement in which a cup type harmonic drive is directly coupled to a pancake configuration drive motor. The motor, with its dual stator driving a common rotor, is one illustration of the concept of selective redundacy. Selective redundancy promotes the idea that redundancy, to be effective, must not compromise inherent design simplicity nor introduce new failure modes. The usefulness of the actuator is exemplified by its selection for a broad range of positioning and driving applications including TDRSS gimbal drives, Space Telescope deployment and latching machanisms, and Space Telescope secondary mirror drive, as well as others.

Hammond, J. C.↗

Hybrid optimization of truss structures with strength and buckling constraints

An efficient scheme utilizing standard nonlinear programming methodology is presented for the optimal design of elastic, redundant structures with strength and buckling constraints. Numerical examples are given which demonstrate how this method, involving a constraint redefinition, can successfully overcome certain problems typical to such structures. The scheme is applied to the design of a cantilever truss with strength and buckling constraints, in which optimal nonuniform cross section columns are used for all elements critical in buckling. It is found that permitting node movement and adding redundancies can lower the weight of the structure for the prescribed design constraints. In addition, the node excursions in this configuration are shown to be relatively small.

Hajela, P.↗

On testing stuck-open faults in CMOS combinational circuits

Recently it has been found that a class of failure related to a particular technology (CMOS) cannot be modelled as the conventional stuck-at fault model. These failures change the combinational behavior of CMOS logic gates into a sequential one. Such a failure is modelled as a fault, called the Stuck-Open fault (SOP). The object of this paper is to develop a procedure to detect single SOPs in combinational circuits. It is shown, that in general, tests generated for stuck-at faults when applied in a particular sequence will detect all single SOP faults. In case of single redundancy in the network, the SOP fault on the redundant line cannot be detected. When there is reconvergent fan-out in the network, there is a one-one correspondence between the conditions for stuck-at fault and stuck-open fault detectability.

Chandramouli, R.↗

Integrated airframe/propulsion control system architectures (IAPSA) study

Three integrated airframe/propulsion control system (ACS) architectures have been developed and are discussed. The baseline is a state of the art design which integrates autonomous propusion control and airframe flight control systems. Two alternate ACSs for the 1990s using emerging technologies were developed and are compared with each other and the baseline. One of these, designated D/D, uses parallel distributed processing, while the other, designated C/D, centralizes the processing into two centrally located redundant electronics complex. The C/D system locates all redundant computing elements and interfacing electronics in two boxes with optical sensor and actuation devices optically connected to the two boxes. Evaluation reveals the C/D architecture to be better than the other two in five of ten categories; D/D is superior in only two of the ten.

Stern,, A. d.↗

Distributed processing and fiber optic communications in air data measurements

The application of distributed processing, fiber optics, and hardware redundancy to collecting airstream data in Princeton's digitally controlled Variable-Response Research Aircraft (VRA) is described. Microprocessor controlled instrumentation packages in each wingtip of the aircraft collect angle of attack and sideslip data in digital form; after scaling, filtering, and calibrating the data, they send it to the aircraft's microprocessor Digital Flight Control System (micro-DFCS) via digital fiber optic data links. Each wingtip's package is independent of the other; therefore, the system has dual hardware redundancy. The fiber optic link design is presented as well as a description of the calibration and communications software.

Farry, K. A.↗