Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “quantitative”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

A quantitative analysis of hydraulic interaction processes in stream-aquifer systems

The hydraulic relationship between the stream and aquifer can be altered from hydraulic connection to disconnection when the pumping rate exceeds the maximum seepage flux of the streambed. This study proposes to quantitatively analyze the physical processes of stream-aquifer systems from connection to disconnection. A free water table equation is adopted to clarify under what conditions a stream starts to separate hydraulically from an aquifer. Both the theoretical analysis and laboratory tests have demonstrated that the hydraulic connectedness of the stream-aquifer system can reach a critical disconnection state when the horizontal hydraulic gradient at the free water surface is equal to zero and the vertical is equal to 1. A boundary-value problem for movement of the critical point of disconnection is established for an analytical solution of the inverted water table movement beneath the stream. The result indicates that the maximum distance or thickness of the inverted water table is equal to the water depth in the stream, and at a steady state of disconnection, the maximum hydraulic gradient at the streambed center is 2. In conclusion, this study helps us to understand the hydraulic phenomena of water flow near streams and accurately assess surface water and groundwater resources.

42 ENGINEERING↗

Spatially-Resolved Proteomics: Rapid Quantitative Analysis of Laser Capture Microdissected Alveolar Tissue Samples

Global proteomics approaches allow characterization of whole tissue lysates to an impressive depth. However, it is now increasingly recognized that to better understand the complexity of multicellular organisms, global protein profiling of specific spatially defined regions/substructures of tissues (i.e. spatially-resolved proteomics) is essential. Laser capture microdissection (LCM) enables microscopic isolation of defined regions of tissues preserving crucial spatial information. However, current proteomics workflows entail several manual sample preparation steps and are challenged by the microscopic mass-limited samples generated by LCM, and that impact measurement robustness, quantification, and throughput. Here, we coupled LCM with a fully automated sample preparation workflow that with a single manual step allows: protein extraction, tryptic digestion, peptide cleanup and LC-MS/MS analysis of proteomes from microdissected tissues. Benchmarking against the current state of the art in ultrasensitive global proteomic analysis, our approach demonstrated significant improvements in quantification and throughput. Using our LCM-SNaPP proteomics approach, we characterized to a depth of more than 3,400 proteins, the ontogeny of protein changes during normal lung development in laser capture microdissected alveolar tissue containing ~4,000 cells per sample. Importantly, the data revealed quantitative changes for 350 low abundance transcription factors and signaling molecules, confirming earlier transcript-level observations and defining seven modules of coordinated transcription factor/signaling molecule expression patterns, suggesting that a complex network of temporal regulatory control directs normal lung development with epigenetic regulation fine-tuning pre-natal developmental processes. Furthermore, our LCM-proteomics approach facilitates efficient, spatially-resolved, ultrasensitive global proteomics analyses in high-throughput that will be enabling for several clinical and biological applications.

60 APPLIED LIFE SCIENCES↗

Elucidating dynamic metabolic physiology through network integration of quantitative time-course metabolomics

In this study, the increasing availability of metabolomics data necessitates novel methods for deeper data analysis and interpretation. We present a flux balance analysis method that allows for the computation of dynamic intracellular metabolic changes at the cellular scale through integration of time-course absolute quantitative metabolomics. This approach, termed “unsteady-state flux balance analysis” (uFBA), is applied to four cellular systems: three dynamic and one steady-state as a negative control. uFBA and FBA predictions are contrasted, and uFBA is found to be more accurate in predicting dynamic metabolic flux states for red blood cells, platelets, and Saccharomyces cerevisiae . Notably, only uFBA predicts that stored red blood cells metabolize TCA intermediates to regenerate important cofactors, such as ATP, NADH, and NADPH. These pathway usage predictions were subsequently validated through 13 C isotopic labeling and metabolic flux analysis in stored red blood cells. Utilizing time-course metabolomics data, uFBA provides an accurate method to predict metabolic physiology at the cellular scale for dynamic systems.

60 APPLIED LIFE SCIENCES↗

Effects of temperature and gas–liquid mass transfer on the operation of small electrochemical cells for the quantitative evaluation of CO 2 reduction electrocatalysts

In the last few years, there has been increased interest in electrochemical CO 2 reduction (CO2R). Many experimental studies employ a membrane separated, electrochemical cell with a mini H-cell geometry to characterize CO2R catalysts in aqueous solution. This type of electrochemical cell is a mini-chemical reactor and it is important to monitor the reaction conditions within the reactor to ensure that they are constant throughout the study. Here we show that operating cells with high catalyst surface area to electrolyte volume ratios (S/V) at high current densities can have subtle consequences due to the complexity of the physical phenomena taking place on electrode surfaces during CO2R, particularly as they relate to the cell temperature and bulk electrolyte CO 2 concentration. Both effects were evaluated quantitatively in high S/V cells using Cu electrodes and a bicarbonate buffer electrolyte. Electrolyte temperature is a function of the current/total voltage passed through the cell and the cell geometry. Even at a very high current density, 20 mA cm -2 , the temperature increase was less than 4 °C and a decrease of < 10% in the dissolved CO 2 concentration is predicted. In contrast, limits on the CO 2 gas-liquid mass transfer into the cells produce much larger effects. By using the pH in the cell to measure the CO 2 concentration, significant undersaturation of CO 2 is observed in the bulk electrolyte, even at more modest current densities of 10 mA cm -2 . Undersaturation of CO 2 produces large changes in the faradaic efficiency observed on Cu electrodes, with H 2 production becoming increasingly favored. Finally, we show that the size of the CO 2 bubbles being introduced into the cell is critical for maintaining the equilibrium CO 2 concentration in the electrolyte, and we have designed a high S/V cell that is able to maintain the near-equilibrium CO 2 concentration at current densities up to 15 mA cm -2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantitative analyses of enhanced thermoelectric properties of modulation-doped PEDOT:PSS/undoped Si (001) nanoscale heterostructures

Poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS) has high electrical conductivity (~10 3 S cm –1 ) but it demonstrates a low Seebeck coefficient (<15 μV K –1 ), resulting in a low power factor. Mixing PEDOT:PSS with nanostructured semiconductors can enhance the Seebeck coefficient and achieve an improved thermoelectric power factor. Yet, underlying mechanisms for those composite thermoelectric systems are scarcely understood so far. Here, quantitative analyses on the electrical conductivity and Seebeck coefficient for the heterostructures of nanometer-thick PEDOT:PSS on single-crystal Si (001) on sapphire (SOS) are reported. The heterostructures have larger Seebeck coefficients up to 7.3 fold and power factors up to 17.5 fold relative to PEDOT:PSS. The electrical conductivity increased with decreasing combined thicknesses of PEDOT:PSS and Si, and the Seebeck coefficient increased with decreasing PEDOT:PSS thickness, which can be attributed to modulation doping caused by diffusion of holes from PEDOT:PSS into undoped Si. This hypothesis is supported by simulation per band alignment. The valence band offset between Si and PEDOT:PSS dominantly controls the electrical conductivity and Seebeck coefficient of the heterostructures. This study not only suggests mechanistic insights to increase the power factors of PEDOT:PSS-based composites but also opens the door for new strategies to enhance the thermoelectric efficiencies of heterostructured nanocomposite materials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Quantitative 13 C NMR characterization of fast pyrolysis oils

Quantitative 13 C NMR analysis of model catalytic fast pyrolysis (CFP) oils following literature procedures showed poor agreement for aromatic hydrocarbons between NMR measured concentrations and actual composition. Furthermore, modifying integration regions based on DEPT analysis for aromatic carbons resulted in better agreement. Solvent effects were also investigated for hydrotreated CFP oil.

09 BIOMASS FUELS↗

Quantitative isotopic measurements of gas-phase alcohol mixtures using a broadly tunable swept external cavity quantum cascade laser

A swept-ECQCL is used for broadband IR spectroscopy of isotopic mixtures of CH3OH, CH3OD, CH3CH2OH, and CH3CH2OD in a static gas cell over a wavelength range of 9.5 to 10.4 µm. A weighted least squares fitting approach with quantitative library spectra illustrates that significant spectral congestion does not negatively impact the ability for in situ quantification of large isotopic species in a mixture. The noise equivalent concentrations for CH3OH, CH3OD, CH3CH2OH, and CH3CH2OD are 19 ppbv x m, 28 ppbv x m, 450 ppbv x m, and 330 ppbv x m respectively for a 50 second integration time. Based on the observed NECs, isotopic precisions of 0.07‰ and 0.79‰ for a 50 s integration time are calculated for measurements of the [MeOD]/[MeOH] and [EtOD]/[EtOH] isotope ratios , respectively, for the species concentrations in the gas cell.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solvent-free spectroscopic method for high-throughput, quantitative screening of fatty acids in yeast biomass

Sustainable biofuels and bioproducts technologies are being developed by fermentation of sugars present and released from pretreated cellulosic biomass to lipids using oleaginous yeasts. Detailed analytical characterization of lipid content through cultivation under different scenarios not only is a bottleneck that slows down development of improved strains and processes, this process also creates significant chemical waste. Since lipids exhibit a dominant, distinct, and unique fingerprint in the NIR spectrum, the use of multivariate linear regression of respective wavelengths can be used for the prediction of intracellular lipid content present in the yeast biomass. In this work, we present data on the multivariate quantitative correlation of NIR spectra with measured lipid content in different oleaginous yeast strains. This work is the first demonstration of the rapid, non-destructive, lipid quantification on as little as 10 mg of yeast biomass in a 96-well format, preventing significant chemical pollution by applying a real-time monitoring process. We demonstrate a distinct correlation of lipid content with the accumulation of select fatty acids of the lipids for 5 different yeast species, among which, for S. cerevisiae and L. starkeyi , in-depth calibration curves were developed from 65 and 154 unique samples, respectively. Laslty, we demonstrate that NIR spectra can be used to accurately predict intracellular lipid content using multivariate linear regression analysis in a manner of minutes, avoiding the need for lengthy chemical analyses that are resource intensive.

09 BIOMASS FUELS↗

Tolyporphins A–R, unusual tetrapyrrole macrocycles in a cyanobacterium from Micronesia, assessed quantitatively from the culture HT-58-2

The ‘pigments of life’ family has been enlarged by the discovery of the tetrapyrrole macrocycles dubbed tolyporphins, which are present in a cyanobacterial culture (HT-58-2). Of the 18 known tolyporphins, fourteen (A–J and L–O) are dioxobacteriochlorins, three (K, Q and R) are oxochlorins, and one (P) is a porphyrin. The members with a given chromophore absorb similarly but not identically with each other, presenting the problem of absorption spectral aliasing. Tolyporphins G and H are isomers, as are tolyporphins L–O, given the nature of the peripheral ( C -glycoside, –OH, or –OAc) substituents, presenting the (isobaric) problem of mass spectrometric analysis. The distribution of tolyporphin members is known to change over time and under different growth conditions, however, the complexity of the tolyporphins mixture presents challenges toward characterization of the underlying factors that alter such distributions. Liquid chromatography-mass spectrometry with dynamic multiple reaction monitoring (LC-MS-dMRM) was employed to characterize the distribution of tolyporphins under distinct growth media, using two semisynthetic standards, tolyporphin A O,O -dibutyrate and tolyporphin D O,O,O,O -tetrabutyrate. Growth in media containing both ammonium and nitrate salts versus nitrate alone affords increased production of tolyporphins. The absorption spectra of tolyporphins A–R have been reevaluated with regards to molar absorption coefficients, are compared with those of selected tetrapyrrole macrocycles to better understand the effects of chromophores and substituents, and are made available here in print and digital forms for comparison with isolated tolyporphins and mixtures thereof. Together, the work provides the foundation for quantitative assessment of these unusual natural products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantitative U=O bond activation in uranyl complexes via silyl radical transfer

Reductive silylation of the uranyl dication with 1,4-bis(trimethylsilyl)dihydropyrazine, or “Mashima's reagent”, is detailed. The reagent simultaneously delivers silylium ions and electrons to multiple uranyl complexes, i.e. a pyridine dipyrrolide uranyl complex and a common uranyl-containing starting material, UO 2 Cl 2 (OPPh 3 ) 2 . This reaction results in quantitative activation of thermodynamically robust U=O bonds. Furthermore, the reductive functionalization of environmentally persistent actinyl species with Mashima's reagent is seen as a promising solution for nuclear waste remediation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing elemental speciation in hydrochar produced from hydrothermal liquefaction of anaerobic digestates using quantitative X-ray diffraction

Valorization of hydrochar, a solid byproduct from hydrothermal liquefaction (HTL) of anaerobically-digested agriculture wastes (digestates), requires fundamental knowledge of elemental speciation. This study investigated the effects of reaction temperatures (320–360 °C), digestate pH (3.5–8), and digestate cellulose-to-lignin ratios (0.2–1.8) on the speciation (chemical form) and composition of organics and inorganics in hydrochars produced during hydrothermal treatment. Quantitative X-ray diffraction (XRD) method was the primary technique used to characterize hydrochars. The comprehensive XRD pattern processing including the Rietveld refinement protocols demonstrated that the organic phase was comprised of mostly crystalline monocyclic, heterocyclic, and polycyclic aromatics with diverse aliphatic and aromatic substituents, while the inorganic mineral phase consisted of calcium-phosphates, magnesium-phosphates, calcium-carbonates, and magnesium-carbonates. Further, XRD results were validated by the elemental yields of products and the distribution of chemical functionalities measured using solid-state nuclear magnetic resonance (NMR) spectroscopy. The characterization data were used to evaluate proposed mechanistic pathways using compositional analysis of biocrude and aqueous-phase coproducts. Mechanistic pathways developed in the study suggested that benzoic acids, phenols, benzaldehydes, phenolic aldehydes, α-dicarbonyls, and α-hydroxycarbonyls were responsible for the precipitation of organics through various reactions depending on operating conditions. Meanwhile, the formation of inorganic compounds appeared to be consistently represented by reactions including dehydration, hydrolysis, endergonic reduction, and structure rearrangement of native minerals in the digestates. This study provides basic knowledge needed to create and assess potential elemental speciation pathways. In addition, the results of the study facilitate the specification of process conditions to optimize targeted utilization routes of hydrochar for more economically-feasible and sustainable HTL processing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Kaonic Quantitative Complementarity and Quantum Erasers

We illustrate two basic aspects of quantum mechanics applied to the neutral kaon system. A quantitative formulation of Bohr's complementarity principle is first described for the free space evolution of single kaons and entangled kaon pairs. We then show that the neutral kaon system is also suitable for an optimal demonstration of the 'quantum eraser', including its operation in the 'delayed choice' mode.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A quantitative account of electron energy transport in a National Spherical Tokamak Experiment plasma

The first successful quantitative account of the electron thermal conductivity {chi}{sub e} in a tokamak experiment due to imperfect magnetic surfaces is presented. The unstable spectrum of microtearing instabilities is calculated with the GS2 code for a well-behaved H-mode plasma in the National Spherical Tokamak Experiment [M. Ono et al., Nucl. Fusion 40, 557 (2000)], with 6 MW deuterium neutral beam heating at I{sub p}=0.75 MA, B{sub t}=0.5 T. The application of existing nonlinear theory shows that the unstable modes can produce overlapping magnetic islands leading to global stochastic magnetic fields. The calculated {chi}{sub e} based on the present theory is in reasonable agreement with the values from transport analysis of the experimental data over the entire region (0.4<r/a<0.75) where the electron temperature gradient is strong enough to make microtearing the most unstable mode. There is no adjustable parameter in this comparison. This instability can be avoided by reversed magnetic shear or by heating the electrons to lower the electron-ion collision frequency.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

QUANTITATIVE NON-DESTRUCTIVE EVALUATION (QNDE) OF THE ELASTIC MODULI OF POROUS TIAL ALLOYS

The elastic moduli of {gamma}-TiA1 were studied in porous samples consolidated by various techniques e.g. cold isostatic pressing (CIP), pressure-less sintering, or hot isostatic pressing (HIP). Porosity linearly affects the dynamic elastic moduli of samples. The results indicate that the sound wave velocities and the elastic moduli affected by the processing route and depend not only on the attained density but also on the consolidation temperature. In this paper we show that there is linear correlation between the shear and the longitudinal sound velocities in porous TiA1. This opens the way to use a single sound velocity as a tool for quantitative non-destructive evaluation (QNDE) of porous TiA1 alloys. Here we demonstrate the applicability of an equation derived from the elastic theory and used previously for porous cubic metals.

36 MATERIALS SCIENCE↗

Quantitative scanning near-field microwave microscopy for thin film dielectric constant measurement

We combine a scanning near-field microwave microscope with an atomic force microscope for use in localized thin film dielectric constant measurement, and demonstrate the capabilities of our system through simultaneous surface topography and microwave reflection measurements on a variety of thin films grown on low resistivity silicon substrates. Reflection measurements clearly discriminate the interface between {approx}38 nm silicon nitride and dioxide thin films at 1.788 GHz. Finite element simulation was used to extract the dielectric constants showing the dielectric sensitivity to be {delta}{epsilon}{sub r}=0.1 at {epsilon}{sub r}=6.2, for the case of silicon nitride. These results illustrate the capability of our instrument for quantitative dielectric constant measurement at microwave frequencies.

36 MATERIALS SCIENCE↗