Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “predictive analytics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

Solar Ion Processing of Itokawa Grains: Reconciling Model Predictions with Sample Observations

Analytical TEM observations of Itokawa grains reported to date show complex solar wind ion processing effects in the outer 30-100 nm of pyroxene and olivine grains. The effects include loss of long-range structural order, formation of isolated interval cavities or "bubbles", and other nanoscale compositional/microstructural variations. None of the effects so far described have, however, included complete ion-induced amorphization. To link the array of observed relationships to grain surface exposure times, we have adapted our previous numerical model for progressive solar ion processing effects in lunar regolith grains to the Itokawa samples. The model uses SRIM ion collision damage and implantation calculations within a framework of a constant-deposited-energy model for amorphization. Inputs include experimentally-measured amorphization fluences, a Pi steradian variable ion incidence geometry required for a rotating asteroid, and a numerical flux-versus-velocity solar wind spectrum.

Christoffersen, Roy↗
NASA NTRS1975

Prediction of payload vibration environments by mechanical admittance test techniques

A series of experiments was conducted with simple beam and mass launch vehicle and payload models in order to determine the validity of mechanical admittance/impedance techniques applied to development of improved payload vibration tests. Admittances and impedances were measured from tests of the individual components to form matrices which were combined analytically to allow prediction of responses for the complete system. Results were computed for a transmission matrix approach and an admittance matrix approach. Both a rigid body and a flexible payload model were considered. The results clearly demonstrate that the transmission matrix method is too sensitive to measurement error to be practical for this application, while the pure admittance matrix method produces quite satisfactory results. The effects of various errors on the final results are demonstrated.

Kana, D. D.↗
NASA NTRS1975

Prediction of payload vibration environments by mechanical admittance test techniques

A series of experiments were conducted with simple beam and mass launch vehicle and payload models in order to determine the validity of mechanical admittance/impedance techniques applied to development of improved payload vibration tests. Admittance and impedances were measured from tests of the individual components to form matrices which were combined analytically to allow prediction of responses for the complete system. Results were computed for a transmission matrix approach and an admittance matrix approach. Only results for the admittance method appeared to be satisfactory when compared to measurements on the combined system.

Kana, D. D.↗
NASA NTRSDate not supplied

An In-Time Aviation Safety Management System (IASMS) Concept of Operations for Part 139 Airports

Today’s airports are complex multi-faceted ecosystems. Currently, of the 517certificatedairports, 270arerequired to use safety management systems (SMSs) to identify and mitigate known hazards and emergent risks and to voluntarily share safety data with commercial operators and tenants. Airports manage a wide variety of hazards. These traffic hubs have direct responsibilities, such as removing foreign object debris from runways and taxiways and configuring runways to help prevent against incursions and tail strikes during takeoff. To ensure safety in the future NAS, the National Academies recommended an In-time Aviation Safety Management System (IASMS). An IASMS will employ services, functions, and capabilities (SFCs) to identify and mitigate hazards that are proactively and predictively managed based on data analytics of detected anomalies, precursors, and trends. SFCs would scale with airport complexity and environmental conditions using increasingly automated systems to respond proactively to hazards and, by using integrated data sources and predictive safety analytical methods, discover new, never before seen risks.

Ellis, K↗
NASA NTRS2024

In-Time Safety Management for Part 139 Airports

Today’s airports are complex multi-faceted ecosystems. Currently, of the 517 certificated airports, 270 are required to use safety management systems (SMSs) to identify and mitigate known hazards and emergent risks and to voluntarily share safety data with commercial operators and tenants. Airports manage a wide variety of hazards. These traffic hubs have direct responsibilities, such as removing foreign object debris from runways and taxiways and configuring runways to help prevent against incursions and tail strikes during takeoff. To ensure safety in the future NAS, the National Academies recommended an In-time Aviation Safety Management System (IASMS). An IASMS will employ services, functions, and capabilities (SFCs) to identify and mitigate hazards that are proactively and predictively managed based on data analytics of detected anomalies, precursors, and trends. SFCs would scale with airport complexity and environmental conditions using increasingly automated systems to respond proactively to hazards and, by using integrated data sources and predictive safety analytical methods, discover new, never before seen risks.

IASMS↗
NASA NTRS1981

Parametric study of minimum reactor mass in energy-storage dc-to-dc converters

Closed-form analytical solutions for the design equations of a minimum-mass reactor for a two-winding voltage-or-current step-up converter are derived. A quantitative relationship between the three parameters - minimum total reactor mass, maximum output power, and switching frequency - is extracted from these analytical solutions. The validity of the closed-form solution is verified by a numerical minimization procedure. A computer-aided design procedure using commercially available toroidal cores and magnet wires is also used to examine how the results from practical designs follow the predictions of the analytical solutions.

Wong, R. C.↗
NASA NTRS1989

Mach 5 inlet CFD and experimental results

An experimental research program was conducted in the NASA Lewis Research Center 10 ft. by 10 ft. supersonic wind tunnel. The two-dimensional inlet model was designed to study the Mach 3.0 to 5.0 speed range for an 'over-under' turbojet plus ramjet propulsion system. The model was extensively instrumented to provide both analytical code validation data as well as inlet performance information. Support studies for the program include flow field predictions with both three-dimensional parabolized Navier-Stokes (PNS) and three-dimensional full Navier-Stokes (FNS) analytical codes. Analytical predictions and experimental results are compared.

Weir, Lois J.↗
NASA NTRS1980

Aerodynamics of a turbojet-boosted launch vehicle concept

Results from analytical and experimental studies of the aerodynamic characteristics of a turbojet-boosted launch vehicle are presented. The success of this launch vehicle concept depends upon several novel applications of aerodynamic technology, particularly in the area of takeoff lift and minimum transonic drag requirements. The take-off mode stresses leading edge vortex lift generated in parallel by a complex arrangement of low aspect ratio booster and orbiter wings. Wind-tunnel tests on a representative model showed that this low-speed lift is sensitive to geometric arrangements of the booster-orbiter combination and is not predictable by standard analytic techniques. Transonic drag was also experimentally observed to be very sensitive to booster location; however, these drag levels were accurately predicted by standard farfield wave drag theory.

Small, W. J.↗
NASA NTRS1976

Thermal Analysis of Axially Grooved Heat Pipes

The liquid viscous drag and the evaporator film coefficient were determined analytically for a heat pipe with axial rectangular grooves under zero-g conditions. The liquid pressure drop and the evaporator film coefficient for an axially grooved heat pipe were found to be expressed by the functions of the meniscus angle, which makes it possible to predict its performance analytically. The performance near its capillary pumping limit is influenced by the contact angle.

Kamotani, Y.↗
NASA NTRS1975

A variable conductance heat pipe flight experiment - Performance in space

The Ames Heat Pipe Experiment (AHPE) is a variable conductance heat pipe/radiator system which was launched aboard the OAO-C spacecraft in August, 1972. All available flight data was reviewed and those from a few orbits were selected for correlation with predictions from an analytical model of the system. The principal conclusion of this study is that gas controlled variable conductance heat pipes can perform reliably for long time periods in the space environment and can effectively provide temperature stabilization for spacecraft electronics. Furthermore, the performance of such systems can be adequately predicted using existing analysis tools.

Wanous, D. J.↗
NASA NTRS1976

Autoignition - A liquid propellant explosive potential limiting phenomena

It has been thought that the unplanned mixing of the propellants of liquid launch vehicles could result in massive explosion and destruction. This paper presents results of NASA's attempt to develop a precise analytical theory and predictive model for liquid propellant explosives. Prediction model experiments involving a 'seven-chart' approach showing the relationship between yield function, mixing function, time dependence, chemical and physical reactant properties and quantity effects were used to establish a theory that autoignition takes place when propellants mix in a certain 'critical mass' or greater. An analytical confirmation of the theory has been carried out, with particular reference to possible autoignition in LOX/LH2 and LOX/RP-1 and Saturn V: it was confirmed that autoignition occurs and prevents the mixing of more than the 'critical mass' and therefore limits the explosive yield to several thousand pounds, which will disperse the remaining propellant and prohibit detonation of the total quantities otherwise suspected.

Boggs, W. H.↗
NASA NTRS1985

Structural response of a rotating bladed disk to rotor whirl

A set of high speed rotating whirl experiments were performed in the vacuum of the MIT Blowdown Compressor Facility on the MIT Aeroelastic Rotor, which is structurally typical of a modern high bypass ratio turbofan stage. These tests identified the natural frequencies of whirl of the rotor system by forcing its response using an electromagnetic shaker whirl excitation system. The excitation was slowly swept in frequency at constant amplitude for several constant rotor speeds in both a forward and backward whirl direction. The natural frequencies of whirl determined by these experiments were compared to those predicted by an analytical 6 DOF model of a flexible blade-rigid disk-flexible shaft rotor. The model is also presented in terms of nondimensional parameters in order to assess the importance of the interation between the bladed disk dynamics and the shaft-disk dynamics. The correlation between the experimental and predicted natural frequencies is reasonable, given the uncertainty involved in determining the stiffness parameters of the system.

Crawley, E. F.↗
NASA NTRS1973

Analytic methods of orbit determination

This paper discusses several analytic models for predicting orbit determination performance during an interplanetary mission. Previously developed models for cruise radio tracking are reviewed and extended. Models for use with first radio and then optical tracking during approach are also developed. Comparison of the results with those obtained with full simulation models is emphasized. Several example problems using the analytic models are introduced to demonstrate the physical understanding possible with their employment.

Curkendall, D. W.↗
NASA NTRS1994

Idealized textile composites for experimental/analytical correlation

Textile composites are fiber reinforced materials produced by weaving, braiding, knitting, or stitching. These materials offer possible reductions in manufacturing costs compared to conventional laminated composites. Thus, they are attractive candidate materials for aircraft structures. To date, numerous experimental studies have been performed to characterize the mechanical performance of specific textile architectures. Since many materials and architectures are of interest, there is a need for analytical models to predict the mechanical properties of a specific textile composite material. Models of varying sophistication have been proposed based on mechanics of materials, classical laminated plate theory, and the finite element method. These modeling approaches assume an idealized textile architecture and generally consider a single unit cell. Due to randomness of the textile architectures produced using conventional processing techniques, experimental data obtained has been of limited use for verifying the accuracy of these analytical approaches. This research is focused on fabricating woven textile composites with highly aligned and accurately placed fiber tows that closely represent the idealized architectures assumed in analytical models. These idealized textile composites have been fabricated with three types of layer nesting configurations: stacked, diagonal, and split-span. Compression testing results have identified strength variations as a function of nesting. Moire interferometry experiments are being used to determine localized deformations for detailed correlation with model predictions.

Adams, Daniel O.↗
NASA NTRS1983

Synthesized airfoil data method for prediction of dynamic stall and unsteady airloads

A detailed analysis of dynamic stall experiments has led to a set of relatively compact analytical expressions, called synthesized unsteady airfoil data, which accurately describe in the time-domain the unsteady aerodynamic characteristics of stalled airfoils. An analytical research program was conducted to expand and improve this synthesized unsteady airfoil data method using additional available sets of unsteady airfoil data. The primary objectives were to reduce these data to synthesized form for use in rotor airload prediction analyses and to generalize the results. Unsteady drag data were synthesized which provided the basis for successful expansion of the formulation to include computation of the unsteady pressure drag of airfoils and rotor blades. Also, an improved prediction model for airfoil flow reattachment was incorporated in the method. Application of this improved unsteady aerodynamics model has resulted in an improved correlation between analytic predictions and measured full scale helicopter blade loads and stress data.

Gangwani, S. T.↗
NASA NTRS1991

Results from a test of a 2/3-scale V-22 rotor and wing in the 40- by 80-Foot Wind Tunnel

A test of a 0.658-scale V-22 rotor and wing was conducted in the 40- by 80-Foot Wind Tunnel at Ames Research Center. The principal objectives of the test were to measure the wing download in hover for a variety of test configurations, and rotor performance in forward flight. Also, a limited amount of data on rotor performance in vertical climb were acquired. This paper presents the results from the test with predictions from appropriate analytical methods. A new method for presenting and interpreting wing surface pressure data in hover is described, and this method shows that the wing flap can produce substantial lift loads in hover. The rotor performance in vertical climb was underpredicted by CAMRAD/JA and by the free wake analysis EHPIC. A simple momentum theory is presented which provides good predictions of rotor performance in forward flight.

Felker, Fort F.↗
NASA NTRS1978

Transient dynamics of a flexible rotor with squeeze film dampers

A series of simulated blade loss tests are reported on a test rotor designed to operate above its second bending critical speed. A series of analyses were performed which predicted the transient behavior of the test rig for each of the blade loss tests. The scope of the program included the investigation of transient rotor dynamics of a flexible rotor system, similar to modern flexible jet engine rotors, both with and without squeeze film dampers. The results substantiate the effectiveness of squeeze film dampers and document the ability of available analytical methods to predict their effectiveness and behavior.

Buono, D. F.↗
NASA NTRS1994

Integrated damping mechanics for thick composite laminates and plates

A method for predicting the damped dynamic characteristics of thick composite laminates and plates is presented. Unified damping mechanics relate the damping of composite plates to constituent properties, fiber volume ratio, fiber orientation, laminate configuration, plate geometry, temperature, and moisture. Discrete layer damping mechanics for thick laminates, entailing piecewise continuous displacement fields and including the effects of interlaminar shear damping, are described. A semi-analytical method for predicting the modal damping and natural frequencies of thick simply-supported specialty composite plates is included. Applications demonstrate the validity, merit, and ranges of applicability of the new theory. The applications further illustrate the significance of interlaminar shear damping, and investigate the effects of lamination, thickness aspect ratio, fiber content, and temperature.

Saravanos, D. A.↗