Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “patch”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Dark-ray and dark-floor craters on Ganymede, and the provenance of large impactors in the Jovian system

The dark-floor and dark-ray craters on the icy Jovian satellite, Ganymede, may derive their visual characteristics from impactor contamination. It is presently hypothesized that the rays darken as a result of the near-surface concentration of impactor material; this could occur, first, due to magnetic sputtering while the rays are bright, and subsequently, once a critical albedo is reached, due to thermal sublimation into discrete icy and nonicy patches. Voyager visible spectra of dark rays indicate that most large-ray systems are 'redder' than grooved or cratered terrains, and are among the 'reddest' units on Ganymede. More than half of the recent impactors on Ganymede may have been reddish D-type asteroids or comets, accounting for the albedos and colors of dark terrains on both Ganymede and Callisto.

Schenk, Paul M.↗

Oberon - Color photometry from Voyager and its geological implications

The surface of the Uranian satellite Oberon is characterized on the basis of ground-based and Voyager photometric observations. Disk-integrated phase-curve and disk-resolved data are presented in extensive tables, graphs, maps, and black-and-white and false-color images and discussed in terms of fits to the Hapke (1986) parameters, local variations in albedo and color, and their possible geological significance. It is found that most of the leading hemisphere is covered with dark materials like those in the crater floors, while the trailing hemisphere has patches of the dark material on a surface with a higher proportion of icy materials which are spectrally neutral.

Helfenstein, Paul↗

Evidence for a 250 second brightness oscillation at 1600 A in the solar temperature minimum region

A 330 s sequence of solar images at 1600 A, where the solar flux arises predominantly from the temperature minimum continuum, obtained from a sounding rocket flight, has been studied. The statistical distributions of the periods and amplitudes which result from fitting a sine wave to each individual 5 arcsec square box within a 350 x 350 arcsec quiet-sun field were obtained. Evidence is found for 250 s oscillations in the quiet-sun brightness temperature in about 10 arcsec coherent patches, with an average amplitude of 50 K. The amplitude corresponds to an energy flux of 180,000 ergs/sq cm/s for undamped, adiabatic, propagating sound waves, which is small compared to the heating requirement in the temperature minimum region.

Cook, J. W.↗

A contact stress model for multifingered grasps of rough objects

The model developed utilizes a contact-stress analysis of an arbitrarily shaped object in a multifingered grasp. The fingers and the object are all treated as elastic bodies, and the region of contact is modeled as a deformable surface patch. The relationship between the friction and normal forces is nonlocal and nonlinear in nature and departs from the Coulomb approximation. The nature of the constraints arising out of conditions for compatibility and static equilibrium motivated the formulation of the model as a nonlinear constrained minimization problem. The model is able to predict the magnitude of the inwardly directed normal forces and both the magnitude and direction of the tangential (friction) forces at each finger-object interface for grasped objects in static equilibrium.

Sinha, Pramath Raj↗

Temporally and spatially resolved flow in a two-stage axial compressor. II - Computational assessment

Fluid dynamics of turbomachines are complicated due to aerodynamic interactions between rotors and stators. It is necessary to understand the aerodynamics associated with these interactions in order to design turbomachines that are both light and compact as well as reliable and efficient. The current study uses an unsteady, thin-layer Navier-Stokes zonal approach to investigate the unsteady aerodyamics of a multistage compressor. Relative motion between rotors and stators is made possible by use of systems of patched and overlaid grids. Results have been computed for a 2 1/2-stage compressor configuration. The numerical data compares well with experimental data for surface pressures and wake data. In addition, the effect of grid refinement on the solution is studied.

Gundy-Burlet, K. L.↗

Electromagnetic scattering from arbitrary shaped conducting bodies coated with lossy materials of arbitrary thickness

A simple and efficient numerical technique is presented to solve the electromagnetic scattering problem of coated conducting bodies of arbitrary shape. The surface equivalence principle is used to formulate the problem in terms of a set of coupled integral equations involving equivalent electric and magnetic surface currents which represent boundary fields. The conducting structures and the dielectric materials are modeled by planar triangular patches, and the method of moments is used to solve the integral equations. Numerical results for scattering cross sections are given for various structures and compared with other available data. These results are proved accurate by a number of representative examples.

Rao, Sadasiva M.↗

HANA - A three-dimensional Navier-Stokes code for chemically reacting flows

A recently developed computer program for analyzing chemically reacting flows is described. The program uses a diagonal implicit algorithm to solve the equations of viscous flow for a gas in thermochemical nonequilibrium. The diagonal scheme eliminates the expense of inverting large block matrices that arise when species conservation equations are introduced. The program uses multiple zones of grids patched together and includes a k-epsilon turbulence model. Solutions are presented for hypersonic flows of air, hypersonic flows of Martian atmospheric gases, combusting flows of hydrogen/air mixtures, and combusting flows of methane/air mixtures.

Imlay, Scott T.↗

Application of an unsteady Navier-Stokes solver to transonic turbine design

This study presents a numerical evaluation of the performance of the first stage of a new-generation turbine design. The numerical method solves the two-dimensional Navier-Stokes equations using a system of patched grids. Three-dimensional effects of stream-tube contraction are also modeled. The study focuses on the effects of axial gap variation on the unsteady rotor-stator interactions and on stage performance. Results are presented for three different axial gaps. The results indicate that the unsteady interactions can be very large in this design. These interactions affect not only the stage efficiency but also substantially alter the time-averaged features of the flow. In particular, for the case of the smallest axial gap, it was found that there was an unsteady shock on the stator suction surface which spanned the gap region and impinged upon the moving rotor airfoils.

Rangwalla, Akil A.↗

Transonic Navier-Stokes solutions about a generic hypersonic configuration

Three-dimensional transonic viscous flow computations are presented for a generic high-speed accelerator model that includes wing, body, fillets, and a no-flow-through engine nacelle. Solutions are obtained from an algorithm for the compressible Navier-Stokes equations that incorporates an upwind-biased, flux-vector-splitting approach along with longitudinally patched grids. Results are presented for fully turbulent flow assumptions and include correlations with wind-tunnel data. A good quantitative agreement for the forebody surface pressure distribution is achieved between computations and the available wind-tunnel measurements at M∞ = 0.9. Furthermore, it is demonstrated that the flow is stagnating around the boattail region due to separation from the aft-engine cowl lip.

Hypersonic flows↗

Systematic displacements between gas and dust in the sunward fans of two low-activity comets

The unusual displacements between the radical emission-line gas and the scattered-light dust continuum of IRAS-Araki-Alcock (1983 VII) and P/Tempel 2 (1988 IXV) are presented. Two-dimensional spectral images were flattened by dome flats and twilight skyflats, and the actual sky subtraction was obtained by sequentially observing clear patches of sky before and after the cometary integrations. A set of slight distributions were obtained along the solar radius vector through the 'optocenter' toward the antisolar direction. Spectral-spatial cross cuts are illustrated, and the continuum and the emission-line regions in the panels are shown. The continuum of IRAS-Araki-Alcock is found to be much stronger than the cometary comae emissions near the nucleus. For the spectra of the relatively faint Comet P/Tempel 2, both dust and gas emission are weaker, and some 'derivatives' remain.

Spinrad, Hyron↗

Coplanar waveguide feeds for phased array antennas

The design and performance is presented of the following coplanar waveguides (CPW) microwave distribution networks for linear as well as circularly polarized microstrip patches and dipole arrays: (1) CPW/microstrip line feed; (2) CPW/balanced stripline feed; (3) CPW/slotline feed; (4) grounded CPW/balanced coplanar stripline feed; and (5) CPW/slot coupled feed. Typical measured radiation patterns are presented, and their relative advantages and disadvantages are compared.

Simons, Rainee N.↗

Navier-Stokes solutions about the F/A-18 wing-LEX-fuselage configuration with multi-block structured grids

Three-dimensional thin-layer Navier-Stokes computations are presented for the F/A-18 configuration. The modeled configuration includes an accurate surface representation of the fuselage, leading-edge-extension, as well as the wing with and without leading-edge-flap deflection. A multi-block structured volume grid with various topologies is generated using transfinite interpolation technique. The flowfield domain is divided into twenty blocks, each representing a particular geometrical complexity of the configuration. The results are obtained from an algorithm for solving the compressible Navier-Stokes equations that incorporates an upwind-biased, flux-difference-splitting approach. In addition, a newly developed capability that allows for generalized surface patching among blocks is employed. Turbulent results are presented for flow conditions that correspond to recent NASA F/A-18 High Alpha Research Vehicle flight experiments. Good correlations between the computations and the flight test results are disclosed for both surface flow patterns as well as surface pressure distributions.

Ghaffari, Farhad↗

Multidomain spectral solution of the Euler gas-dynamics equations

The present interfacial treatments for Euler gasdynamic equation computations via the multidomain Chebyshev spectral collocation method are applicable both at subdomain corners and in overlapping or patched subdomains, for interfaces located in the sub-, super-, or transonic regions of a flow. The results thus obtained are found to be (1) spectrally accurate, (2) both more accurate and more efficient than a single-domain calculation, and (3) potentially more accurate and efficient than a single-domain calculation. Interfacial wave reflection is insignificant.

Kopriva, David A.↗

Microstrip antenna developments at JPL

The in-house development of microstrip antennas, initiated in 1981, when a spaceborne lightweight and low-profile planar array was needed for a satellite communication system, is described. The work described covers the prediction of finite-ground-plane effects by the geometric theory of diffraction, higher-order-mode circularly polarized circular patch antennas, circularly polarized microstrip arrays with linearly polarized elements, an impedance-matching teardrop-shaped probe feed, a dual-polarized microstrip array with high isolation and low cross-polarization, a planar microstrip Yagi array, a microstrip reflectarray, a Ka-band MMIC array, and a series-fed linear arrays.

Huang, John↗

Variable-Orifice Oxygen-Flow Regulator

Variable-orifice flow-control valve switchable between fully and partially opened positions. Straight-through flow patch minimizes high-speed impacts of entrained particles, reducing erosion and accidental ignition. Designed for use with oxygen, also used with variety of liquids and gases.

Christianson, Rollin C.↗

Iddingsite in the Nakhla meteorite: TEM study of mineralogy and texture of pre-terrestrial (Martian?) alterations

Rusty-colored veinlets and patches in the Nakhla meteorite, identified as iddingsite, are pre-terrestrial. The rusty material is iddingsite (smectites + hematite + ferrihydrite); like terrestrial iddingsites, it probably formed during low-temperature interaction of olivine and water. Fragments of rusty material with host olivine were removed from thin sections of Nakhla with a tungsten needle. Fragments were embedded in epoxy, microtomed to 100 nanometers thickness, and mounted on Cu grids. Phase identifications were by Analytical Electron Microscopy/Energy Dispersive X-ray Analysis (EM/EDX) standardless chemical analyses (for silicates), electron diffraction (hematite and ferrihydrite), and lattice fringe imaging. This iddingsite in Nakhla is nearly identical to some formed on Earth, suggesting similar conditions of formation on the Shergottites-Nakhlites-Chassigny (SNC) meteorite parent planet. A more detailed account of the results is presented.

Treiman, Allan H.↗

The first ANDES elements: 9-DOF plate bending triangles

New elements are derived to validate and assess the assumed natural deviatoric strain (ANDES) formulation. This is a brand new variant of the assumed natural strain (ANS) formulation of finite elements, which has recently attracted attention as an effective method for constructing high-performance elements for linear and nonlinear analysis. The ANDES formulation is based on an extended parametrized variational principle developed in recent publications. The key concept is that only the deviatoric part of the strains is assumed over the element whereas the mean strain part is discarded in favor of a constant stress assumption. Unlike conventional ANS elements, ANDES elements satisfy the individual element test (a stringent form of the patch test) a priori while retaining the favorable distortion-insensitivity properties of ANS elements. The first application of this formulation is the development of several Kirchhoff plate bending triangular elements with the standard nine degrees of freedom. Linear curvature variations are sampled along the three sides with the corners as gage reading points. These sample values are interpolated over the triangle using three schemes. Two schemes merge back to conventional ANS elements, one being identical to the Discrete Kirchhoff Triangle (DKT), whereas the third one produces two new ANDES elements. Numerical experiments indicate that one of the ANDES element is relatively insensitive to distortion compared to previously derived high-performance plate-bending elements, while retaining accuracy for nondistorted elements.

Militello, Carmelo↗

Approximation methods for control of acoustic/structure models with piezoceramic actuators

The active control of acoustic pressure in a 2-D cavity with a flexible boundary (a beam) is considered. Specifically, this control is implemented via piezoceramic patches on the beam which produces pure bending moments. The incorporation of the feedback control in this manner leads to a system with an unbounded input term. Approximation methods in this manner leads to a system with an unbounded input term. Approximation methods in the context of linear quadratic regulator (LQR) state space control formulation are discussed and numerical results demonstrating the effectiveness of this approach in computing feedback controls for noise reduction are presented.

Banks, H. T.↗