Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “optical sensors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

Spacecraft Micro-Vibration: A Survey of Problems, Experiences, Potential Solutions, and Some Lessons Learned

Predicting, managing, controlling, and testing spacecraft micro-vibrations due to on-board internal disturbance sources is a formidable multi-disciplinary systems engineering challenge, especially for those observatories hosting extremely sensitive optical sensor payloads with stringent requirements on allowable Line-of-Sight (LOS) jitter. In this paper some specific spacecraft micro-vibration engineering challenges will be introduced and described. Technical background context is provided with the inclusion of several illustrative examples of NASA and ESA missions (both past and present) where dynamic interactions have to be addressed and which have demanding payload instrument LOS jitter requirements. A general modeling, analysis, simulation, and test approach to address and solve the overall problem of spacecraft micro-vibrations is outlined. Recommended rules of thumb are presented to provide guidance for analysts on where to initiate and how to approach a new spacecraft micro-vibration design problem. A set of experience based spacecraft micro-vibration lessons learned are also presented in the hope they can be leveraged on new system development projects to help overcome unfamiliarity with previously identified micro-vibration technical pitfalls and challenges.

Alvarez-Salazar, Oscar S.↗
NASA NTRS2021

Assessing Disaggregated SMAP Soil Moisture Products in the United States

A soil moisture (SM) disaggregation algorithm based on thermal inertia (TI) theory was implemented to downscale the Soil Moisture Active Passive (SMAP) Enhanced product(SPL2SMPE) from 9 km to 1 km over the continental United States. The algorithm applies land surface temperature and normalized difference vegetation index from Moderate Resolution Imaging Spectroradiometer (MODIS) at higher spatial resolution to estimate relative soil wetness within a coarse SMAP grid -this MODIS-derived relative wetness is then used to produce the downscaled SMAP SM. Results from the algorithm were evaluated in terms of their spatiotemporal coverage and accuracy using in situ measurements from SMAP Core Validation Sites (CVS), the US Department of Agriculture Soil Climate Analysis Network (USDA-SCAN), and the National Oceanic and Atmospheric Administration Climate Reference Network(NOAA-CRN). Results were also compared with the baselineSPL2SMPE and the SMAP/Sentinel-1 (SPL2SMAPS) 1kmproduct. Overall, the unbiased root mean square error (ubRMSE)of the disaggregated SM at the CVS using the TI approach is approximately 0.04 m3=m3, which is the SMAP mission requirement for the baseline products. The TI approach out performs the SMAP/Sentinel SL2SMAPS 1km product by approximately0.02 m3=m3. Over the agriculture/crop areas from SCAN and CRN sparse network stations, the TI approach exhibits better ubRMSE compared to SPL2SMPE andSPL2SMAPS byabout0.01 and 0.02 m3=m3, indicating its advantage in these areas. However, a drawback of this approach is that there are data gaps due to cloud cover as optical sensors cannot have a clear view of the land surface.

Soil moisture↗
NASA NTRSDate not supplied

Generation of Continental Scale Percent Tree Cover Product Using Deep-learning and Multi-scale Remote Sensing Data

Spatially explicit percent tree cover (TC) estimation is critical for mapping forest aboveground biomass and its dynamics. While various TC products have been developed, there has not been a generalized framework that can be applied to diverse terrestrial ecosystems due to underlain extreme complexities. Deep learning algorithms can learn a spatial pattern and radiometric characteristics of tree canopy as a robust approximation of physical or empirical models, and thus have emerged as promising and efficient tools for large-scale TC mapping. In this study, we synergistically use very high-resolution aerial imageries (National Agriculture Imagery Program, NAIP) and medium resolution Landsat data to map continental-scale TC (CONUS and Mexico) through a hierarchical deep learning approach (Convolutional Neural Network), i.e., NAIP TC generated from a NAIP model is utilized to train a Landsat model. The produced TC product (hereafter, NEX-TC) is able to capture the spatial pattern of TC distribution and its changes driven by natural disturbance and human land management. We further explore and analyze the reliability and potential uncertainty of the NEX-TC by comparing it to lidar- (lidar-TC), National Land Cover Database (NLCD-TC), and MODIS Vegetation Continuous Field (MODIS-TC). This evaluation practice reveals that TC products based on passive optical sensors tend to underestimate TC across all land cover types while Landsat-based TCs (i.e., NEX-TC & NLCD-TC) perform better than the coarser MODIS TC estimate. Our results show that the NEX-TC is generally comparable to NLCD-TC but it particularly outperforms NLCD-TC and MODIS-TC over the dense forests where lidar-TC indicates >80% TC. These results indicate that our hierarchical deep learning approach and TC product will be effective and useful for characterizing large-scale tree cover and possibly associated carbon dynamics.

Landsat↗
NASA NTRSDate not supplied

Post-flight Analysis of Atmospheric Properties from Mars 2020 Entry, Descent, and Landing

The Mars 2020 spacecraft landed the Perseverance rover and Ingenuity helicopter successfully in Jezero crater on Feb. 18, 2021. The entry, descent, and landing (EDL) sequence of the spacecraft largely leveraged the previous Mars Science Laboratory (MSL) mission. The atmospheric modeling approach for Mars 2020 was also borrowed from MSL, and consisted of utilizing two mesoscale atmospheric models of the landing site during the Martian season of landing, and using that data to create a statistical model of the pressure, density, temperature, and winds that Mars 2020 could have expected to encounter. Additionally, Mars 2020 contained an optical sensor - Landing Vision System (LVS) - that relied on taking pictures of the terrain, and was sensitive to the dust opacity of the atmosphere. This paper will briefly describe the pre-flight atmospheric models used for Mars 2020, but will focus on post-flight assessment of these models by comparing them to near-landing day orbiter sounder data and onboard atmospheric measurements. Suggestions for potential model changes will be also discussed.

Soumyo Dutta↗
NASA NTRSDate not supplied

Post-flight Analysis of Atmospheric Properties from Mars 2020 Entry, Descent, and Landing

The Mars 2020 spacecraft landed the Perseverance rover and Ingenuity helicopter successfully in Jezero crater on Feb. 18, 2021. The entry, descent, and landing (EDL) sequence of the spacecraft largely leveraged the previous Mars Science Laboratory (MSL) mission. The atmospheric modeling approach for Mars 2020 was also borrowed from MSL, and consisted of utilizing two mesoscale atmospheric models of the landing site during the Martian season of landing, and using that data to create a statistical model of the pressure, density, temperature, and winds that Mars 2020 could have expected to encounter. Additionally, Mars 2020 contained an optical sensor - Landing Vision System (LVS) - that relied on taking pictures of the terrain, and was sensitive to the dust opacity of the atmosphere. This paper will briefly describe the pre-flight atmospheric models used for Mars 2020, but will focus on post-flight assessment of these models by comparing them to near-landing day orbiter sounder data and onboard atmospheric measurements. Suggestions for potential model changes will be also discussed.

Soumyo Dutta↗
NASA NTRSDate not supplied

Dusty Environment Classification and Testing: Dust Mitigation Slide Cleaning Material Study

During the Apollo missions many mechanisms, equipment, and surfaces were contaminated by lunar dust and often negatively affected. The methods used to clear these devices of dust proved ineffective, which led to premature failure in some cases. Systems being designed for upcoming missions to the Moon will need to address the performance degradation risk of dust contamination. Surfaces at risk include thermal control surfaces, solar cells, camera and sensor optics, seals, metal joints and tools, and space suit assemblies. To improve state of the art dust mitigation approaches, the dust mitigation team at NASA Glenn Re-search Center (GRC) explored the effects imposed on substrates during cleaning activities in the presence of lunar dust. The Uniform Dust Deposition System (UDDS) was used to conduct a study of various cleaning techniques on different substrates. Test substrates and cleaning media were selected to represent a wide range of structural and functional materials. Substrates included orthofabric, thermal radiator coating, aluminum, quartz glass, silicone rubber, aluminized Mylar, and FEP. Cleaning materials included cloth wipes, tapes, a brush, and a pliable cleaner concept. Cleaning material / substrate pairs were rated on cleaning efficiency, substrate damage, cleaning material longevity, and ease of use. The best performing cleaning method varied based on application.

dust mitigation↗
NASA NTRSDate not supplied

CyanoSCape: Freshwater Phytoplankton and Floating Aquatic Vegetation Biodiversity

In Southern Africa, the impacts of anthropogenic activities on biodiversity and ecosystem services are exacerbated by the climate crisis. Rapid land use change and the lack of emphasis on environmentally sustainable agricultural practices has hindered hydrological processes and compromised riverine and aquatic ecosystems. This poses obvious risks to natural/indigenous aquatic biodiversity and long-term ecosystem sustainability. Phytoplankton serve as the foundation of the freshwater food web with zooplankton as consumers, which feed fish, invertebrates, and so on up the food chain that comprises the biodiversity of the freshwater system that serves as habitat for biodiversity as well. The diversity of phytoplankton (microscopic organisms) includes photosynthesizing bacteria (cyanobacteria), plant-like diatoms, dinoflagellates, and green algae. Nutrient run-off from agricultural fertilizers and urban overflows, warm temperatures, abundant light availability and compromised hydrological systems provide an ideal environment for cyanobacteria to flourish. Increased prevalence of cyanobacteria, due to both natural and anthropogenic causes, can incur significant effects on the biodiversity of the overall phytoplankton assemblage. These bloom forming algae can significantly outcompete other phytoplankton classes in warmer and eutrophic waters where they are quick to dominate the freshwater system. Eutrophication and toxic cyanobacteria blooms (cyanoHABs) in the inland waters of the Greater Cape Floristic Region (GCFR) incur significant effects on the biodiversity of the overall phytoplankton assemblage and provide a favorable environment forthe overgrowth of floating aquatic vegetation (FAV), which is often invasive and associated with reduced aquatic biodiversity. The algal biodiversity of the GCFR’s freshwater systems is not well characterized. Hyperspectral optical observations are expected to facilitate the improvement of current phytoplankton functional type retrievals significantly, as the sensitivity is sufficient that the distinctive, fine spectral features of different phytoplankton groups can be detected. This will enable testing emerging algorithms and inform the development of new algorithms for use with upcoming hyperspectral satellite missions in this decade. Innovations in optical sensor sensitivity and next generation machine learning capabilities considerably enhance the potential for accurate and rapid detection of phytoplankton, namely the presence, extent, and diversity of cyanobacteria present in cyanoHABs and additionally, invasive FAV. Upcoming hyperspectral satellite missions such as NASA’s Surface Biology and Geology (SBG), Plankton, Aerosol, Cloud, ocean Ecosystem (PACE), and the European Space Agency’s Copernicus Hyperspectral Imaging Mission (CHIME) will provide imagery with unprecedented spectral and spatial resolution which will further enable the discovery of linkages between the seasonality and dynamics of HABs and FAV. The overarching goal of this project is to utilize hyperspectral data, with recently developed and next-generation algorithms, to determine the biodiversity of freshwater systems phytoplankton assemblage with emphasis on genus level distinction, as well as monitor the prevalence and diversity of FAV.

CyanoSCape↗
NASA NTRS2023

Cryogenic Fluid In-Situ Liquefaction for Landers: Prototype Demonstration

As the advancement of In-Situ Resource Utilization concepts and systems continue to develop, applicable technology development and maturation continues in parallel. While there are many different ways to use the resources found on other bodies, one of the most prevalent suggested applications is the manufacturing of propellants. One of the key technologies for the eventual use of these propellant production based ISRU systems is the liquefaction and storage of the produced propellants. The most mentioned propellant combinations include oxygen-hydrogen and oxygen-methane. The liquefaction of oxygen in these systems will be different than oxygen liquefaction systems on Earth, which mainly revolves around the distillation of air. These systems have been developed conceptually and many of the components have been previously tested or are in development. However, the need to demonstrate the system level operations still exists. The demonstration of a prototypical oxygen liquefaction system using tube-on-tank broad area cooling was completed to better understanding system level operations during liquefaction activities. Demonstration testing included system performance determination, constant liquefaction demonstrations, and transient liquefaction demonstrations. The demonstrations showed the operational capabilities of the tube-on-tank system with an integrated cryocooler. Additional testing explored subsurface vs ullage introduction of the gaseous oxygen flow stream as well as demonstrating a novel fiber optic sensor that measured the temperature gradients along the fluid center line within the tank.

ISRU↗
NASA NTRSDate not supplied

Cryogenic Fluid In-Situ Liquefaction for Landers: Prototype Demonstration

As the advancement of In-Situ Resource Utilization concepts and systems continue to develop, applicable technology development and maturation continues in parallel. While there are many different ways to use the resources found on other bodies, one of the most prevalent suggested applications is the manufacturing of propellants. One of the key technologies for the eventual use of these propellant production based ISRU systems is the liquefaction and storage of the produced propellants. The most mentioned propellant combinations include oxygen-hydrogen and oxygen-methane. The liquefaction of oxygen in these systems will be different than that on Earth, which mainly revolves around the distillation of air. These systems have been developed conceptually and many of the components have been previously tested or are in development. However, the need to demonstrate the system level operations still exists. The demonstration of a prototypical oxygen liquefaction system using tube-on-tank broad area cooling was completed to better understanding system level operations during liquefaction activities. Demonstration testing included system performance determination, constant liquefaction demonstrations, and transient liquefaction demonstrations. The demonstrations showed the operational capabilities of the tube-on-tank system with an integrated cryocooler. Additional testing explored subsurface vs ullage introduction of the gaseous oxygen flow stream as well as demonstrating a novel fiber optic sensor that measured the temperature gradients along the fluid center line within the tank.

ISRU↗
NASA NTRSDate not supplied

Cryogenic Fluid In-Situ Liquefaction for Landers: Prototype Demonstration

As the advancement of In-Situ Resource Utilization concepts and systems continue to develop, applicable technology development and maturation continues in parallel. While there are many different ways to use the resources found on other bodies, one of the most prevalent suggested applications is the manufacturing of propellants. One of the key technologies for the eventual use of these propellant production based ISRU systems is the liquefaction and storage of the produced propellants. The most mentioned propellant combinations include oxygen-hydrogen and oxygen-methane. The liquefaction of oxygen in these systems will be different than oxygen liquefaction systems on Earth, which mainly revolves around the distillation of air. These systems have been developed conceptually and many of the components have been previously tested or are in development. However, the need to demonstrate the system level operations still exists. The demonstration of a prototypical oxygen liquefaction system using tube-on-tank broad area cooling was completed to better understanding system level operations during liquefaction activities. Demonstration testing included system performance determination, constant liquefaction demonstrations, and transient liquefaction demonstrations. The demonstrations showed the operational capabilities of the tube-on-tank system with an integrated cryocooler. Additional testing explored subsurface vs ullage introduction of the gaseous oxygen flow stream as well as demonstrating a novel fiber optic sensor that measured the temperature gradients along the fluid center line within the tank.

ISRU↗
NASA NTRSDate not supplied

A Vacuum-Compatible, Spectrally Tunable, Flat Panel Uniform Source for Testing Large Aperture Earth Observation Systems

Labsphere, Inc in conjunction with NASA GSFC and Genesis Engineering Solutions inc. has developed an innovative, fully T-VAC compatible, calibration spectro-radiometric illumination source with a highly uniform large-area rectangular flat panel active area. This source leverages a new shaped integration geometry to achieve high uniformity over a large active output area while maintaining a smaller and more robust overall form-factor when compared to previous designs or integrating spheres. This new illuminator also leverages a set of selectable LED arrays as well as broadband tungsten-halogen sources to provide multi-level, wide spectrum reference illumination to the VIIRS instrument over all optical sensor bands during pre-launch testing. The first unit has been demonstrated to meet its requirements using ambient technology and a fully-vacuum-compatible second unit is planned to allow testing for T-VAC campaigns. This technology is both flexible and capable of meeting the needs of many other instruments/missions requiring this type of test/calibration capability.

Jeff Holt↗
NASA NTRSDate not supplied

Starling Swarm Mission – Technology Objectives, Status and Future Applications

NASA’s Starling mission is advancing the readiness of technologies for cooperative groups of space craft referred to as swarms. The Starling swarm of four 6U spacecraft launched in July 2023, and is completing its tests in Low Earth Orbit (LEO) of four key technologies that will enable future swarm missions: onboard maneuver planning and execution to adjust the swarm formation; establishing and maintaining an adhoc network in space; relative and absolute orbit determination using optical sensors; autonomous collaboration between spacecraft for establishing and conducting a science observation plan. A mission extension is also being prepared to demonstrate a space traffic management architecture to address the large and rapidly growing number of space craft in LEO. In this presentation, the objectives of the Starling mission and its extension will be reviewed along with the latest status and mission outcomes. The presentation will also look at the revolutionary potential for swarms in future science and exploration missions and the impact to operations.

SpaceOps Starling Swarm Distributed Spacecraft Net↗
NASA NTRS2025

Simultaneous Localization and Mapping for Spacecraft Rendezvous and Proximity Operations Using Random Finite Sets

Future space missions require spacecraft to autonomously navigate non-cooperative environments for rendezvous and proximity operations (RPO). Current navigation filters used for RPO can have difficulty when optical sensors are used, due to complications with data association, high measurement uncertainty, and clutter. This paper provides an initial demonstration of the feasibility of using random finite set (RFS) filters for spacecraft relative navigation and pose estimation. Spacecraft relative navigation is formulated as a simultaneous localization and mapping (SLAM) problem, in which an observer spacecraft seeks to simultaneously estimate the location of features on a target object or spacecraft as well as its relative position, velocity and attitude. Simulated flash LIDAR measurements are processed using a Gaussian Mixture Probability Hypothesis Density (GMPHD) filter embedded in a particle filter to obtain a feature map of a target and a relative pose estimate between the target and observer over time. Results show that an RFS-based filter can successfully perform SLAM in a spacecraft relative navigation scenario.

David E Gaylor↗
NASA NTRS2022

Dusty Environment Classification and Testing: Dust Mitigation Slide Wipes & Tapes

During the Apollo missions many mechanisms, equipment, and surfaces were contaminated by lunar dust and often negatively affected. The methods used to clear these devices of dust proved ineffective, which led to premature failure in some cases. Systems being designed for upcoming missions to the Moon will need to address the performance degradation risk of dust contamination. Surfaces at risk include thermal control surfaces, solar cells, camera and sensor optics, seals, metal joints and tools, and space suit assemblies. To improve state of the art dust mitigation approaches, the dust mitigation team at NASA Glenn Research Center (GRC) explored the effects imposed on substrates during cleaning activities in the presence of lunar dust. The Uniform Dust Deposition System (UDDS) was used to conduct a study of various cleaning techniques on different substrates. Test substrates and cleaning media were selected to represent a wide range of structural and functional materials. Substrates included orthofabric, thermal radiator coating, aluminum, quartz glass, silicone rubber, aluminized Mylar, and FEP. Cleaning materials included cloth wipes, tapes, a brush, and a pliable cleaner concept. Cleaning material / substrate pairs were rated on cleaning efficiency, substrate damage, cleaning material longevity, and ease of use. The best performing cleaning method varied based on application.

lunar simulant↗
NASA NTRSDate not supplied

The NASA Jitter Handbook Development Activity: A Multidisciplinary Collaborative Effort

Spaceflight missions hosting high-performance vibration-sensitive optical sensor payloads with stringent pointing stability requirements are especially challenged in the areas of predicting, managing, controlling, and testing spacecraft line-of-sight (LoS) jitter. The community recognizes that this is a formidable multidisciplinary engineering task. However, while some textbooks and references in the aerospace literature may touch on the subject of jitter, important details of specific flight proven methodologies and techniques used by today’s jitter engineering practitioners are not readily accessible. There is no know engineering reference document with guidelines and best practices for managing and mitigating space-craft jitter. To fill this knowledge gap the NASA Engineering and Safety Center (NESC) has undertaken the task of developing a NASA Jitter Handbook which would include lessons learned and best practices for design, analysis, and test, along with operational guidelines to mitigate jitter. In this paper the plan for this handbook development will be described along with the envisioned handbook framework, key NASA stakeholders, and potential envisioned jitter engineering case studies. Opportunities exist technical collaboration on this handbook with NASA-external organizations.

Christopher D'Souza↗
DOE OSTI2022

Optical device for in-line and real-time monitoring of microorganisms

A multi-wavelength laser diode based optical sensor system capable of monitoring the dynamics and physiological changes of a microorganism culture in real-time. The microorganism culture from a microorganism production chamber is pumped to a flow chamber. Laser diodes emit light at certain wavelengths through the flow chamber, which is sensed by photodiodes. A laser control circuitry is operatively connected to the laser diodes and a signal conditioning circuitry is operatively connected to the photodiodes. A microprocessor reads and records voltage signals corresponding to the wavelengths. A data acquisition system converts said voltage signals into measurements of biological parameters, which are displayed on a graphical user interface and allow a user to monitor the measurements in real time.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

System and method for tracking reinforcement member placement in an additively manufactured structure

The present application presents novel systems and methods for tracking reinforcement member placement in an additively manufactured structure that are simple, accurate, non-labor-intensive, and cost-effective. The present application also presents a novel method of manufacturing a tower structure comprising: depositing, via an additive printing system, a first printed layer of a wall with a printhead assembly, the wall at least partially circumscribing a vertical axis of the tower structure; positioning a first reinforcement member on the first printed layer; depositing, via the additive printing system, a second printed layer of the wall with the printhead assembly on the first reinforcement member, the second printed layer configured to hold a second reinforcement member thereon; and determining, via an optical sensor of the additive printing system, a position for placing the second reinforcement member based on the first reinforcement member positioning.

Kenny, Christopher James↗
NASA NTRS1978

Analysis and preliminary design of an optical digital tip clearance sensor for propulsion control

Following the generation of several concepts for passive, digital compatible, optical sensors for propulsion control systems, a tip clearance sensor was chosen for further analysis and preliminary design. Emphasis was placed on application to the TF34 engine compressor section. Laboratory experiments were performed to investigate several optical aspects of the concept. Preliminary design included an assessment of all sensor elements and recommendations for development programs. Quantitative predictions were made of sensor performance. A test plan was written to demonstrate sensor feasibility and that the performance goals can be met. A continuing experimental and design effort was suggested.

Poppel, G. L.↗