Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “numerical mathematics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Effect of longitudinal stringers on sound transmission into a thin cylindrical shell

In the context of the transmission of airborne noise into an aircraft fuselage, a mathematical model is presented for the transmission of airborne noise into a stiffened cylindrical shell. The stiffeners are longitudinal stringers and are modeled as discrete structural elements. The numerical cases examined were typical of a narrow-bodied jet transport fuselage. The stringers appeared to raise the cylinder transmission loss in the mass-controlled region, although they produced dips at the stringer resonances. The ring-frequency dip in transmission loss, which is characteristic of monocoque shells, was found to still be present. There appeared to be a small increase in transmission loss as the number of stringers was increased. The effect of high damping was also investigated.

Koval, L. R.↗

Excitation of instability waves in a two-dimensional shear layer by sound

The excitation of instability waves in a plane compressible shear layer by sound waves is studied. The problem is formulated mathematically as an inhomogeneous boundary-value problem. A general solution for abitrary incident sound wave is found by first constructing the Green's function of the problem. Numerical values of the coupling constants between incident sound waves and excited instability waves for a range of flow Mach number are calculated. The effect of the angle of incidence in the case of a beam of acoustic waves is analyzed. It is found that for moderate subsonic Mach numbers a narrow beam aiming at an angle between 50 to 80 deg to the flow direction is most effective in exciting instability waves.

Tam, C. K. W.↗

Tidal dissipation, surface heat flow, and figure of viscoelastic models of Io

The deformation of Io, the tidal dissipation rate, and its interior spatial distribution are investigated by means of numerical simulations based on (1) a three-layer model (with dissipation in the mantle) or (2) a four-layer model (with dissipation in the asthenosphere). The mathematical derivation of the models is outlined; the selection of the input-parameter values is explained; the results are presented in extensive graphs and contour maps; and the constraints imposed on the models by observational data on the hot-spot distribution, tidal deformation, and gravity field are discussed in detail. It is found that both dissipation mechanisms may play a role on Io: model (2) is better able to explain the concentration of hot spots near the equator, while the presence of a large hot spot near the south pole (if confirmed by observations) would favor model (1).

Segatz, M.↗

Kinetic theory model for the flow of a simple gas from a two-dimensional nozzle

A system of nonlinear integral equations equivalent to the Krook kinetic equation for the steady state is the mathematical basis used to develop a computer code to model the flowfields for low-thrust two-dimensional nozzles. The method of characteristics was used to solve numerically by an iteration process the approximated Boltzmann equation for the number density, temperature, and velocity profiles of a simple gas as it exhausts into a vacuum. Results predict backscatter and show the effect of the inside wall boundary layer on the flowfields external to the nozzle.

Riley, B. R.↗

Quantitative computer simulations of extraterrestrial processing operations

The automation of a small, solid propellant mixer was studied. Temperature control is under investigation. A numerical simulation of the system is under development and will be tested using different control options. Control system hardware is currently being put into place. The construction of mathematical models and simulation techniques for understanding various engineering processes is also studied. Computer graphics packages were utilized for better visualization of the simulation results. The mechanical mixing of propellants is examined. Simulation of the mixing process is being done to study how one can control for chaotic behavior to meet specified mixing requirements. An experimental mixing chamber is also being built. It will allow visual tracking of particles under mixing. The experimental unit will be used to test ideas from chaos theory, as well as to verify simulation results. This project has applications to extraterrestrial propellant quality and reliability.

Vincent, T. L.↗

Computational Control Workstation: Users' perspectives

A Workstation has been designed and constructed for rapidly simulating motions of rigid and elastic multibody systems. We examine the Workstation from the point of view of analysts who use the machine in an industrial setting. Two aspects of the device distinguish it from other simulation programs. First, one uses a series of windows and menus on a computer terminal, together with a keyboard and mouse, to provide a mathematical and geometrical description of the system under consideration. The second hallmark is a facility for animating simulation results. An assessment of the amount of effort required to numerically describe a system to the Workstation is made by comparing the process to that used with other multibody software. The apparatus for displaying results as a motion picture is critiqued as well. In an effort to establish confidence in the algorithms that derive, encode, and solve equations of motion, simulation results from the Workstation are compared to answers obtained with other multibody programs. Our study includes measurements of computational speed.

Roithmayr, Carlos M.↗

Effect of nonzero surface admittance on receptivity and stability of compressible boundary layer

The effect of small-amplitude short-scale variations in surface admittance on the acoustic receptivity and stability of two-dimensional compressible boundary layers is examined. In the linearized limit, the two problems are shown to be related both physically and mathematically. This connection between the two problems is used, in conjunction with some previously reported receptivity results, to infer the modification of stability properties due to surface permeability. Numerical calculations are carried out for a self-similar flat-plate boundary layer at subsonic and low supersonic speeds. Variations in mean suction velocity at the perforated admittance surface can also induce receptivity to an acoustic wave. For a subsonic boundary layer, the dependence of admittance-induced receptivity on the acoustic-wave orientation is significantly different from that of the receptivity produced via mean suction variation. The admittance-induced receptivity is generally independent of the angle of acoustic incidence, except in a relatively narrow range of upstream-traveling waves for which the receptivity becomes weaker. However, this range of angles is precisely that for which the suction-induced receptivity tends to be large. At supersonic Mach numbers, the admittance-induced receptivity to slow acoustic models is relatively weaker than that in the case of the fast acoustic modes. We also find that purely real values for the surface admittance tend to have a destabilizing effect on the evolution of an instability wave over a slightly permeable surface. The limits on the validity of the linearized approximation are also assessed in one specific case.

Choudhari, Meelan↗

Studies of Fundamental Particle Dynamics in Microgravity

This work summarizes theoretical and experimental concepts used to design the flight experiment mission for SHIVA - Spaceflight Holography Investigation in a Virtual Apparatus. SHIVA is a NASA project that exploits a unique, holography-based, diagnostics tool to understand the behavior of small particles subjected to transient accelerations. The flight experiments are designed for testing model equations, measuring g, g-jitter, and other microgravity phenomena. Data collection will also include experiments lying outside of the realm of existing theory. The regime under scrutiny is the low Reynolds number, Stokes regime or creeping flow, which covers particles and bubbles moving at very low velocity. The equations describing this important regime have been under development and investigation for over 100 years and yet a complete analytical solution of the general equation had remained elusive yielding only approximations and numerical solutions. In the course of the ongoing NASA NRA, the first analytical solution of the general equation was produced by members of the investigator team using the mathematics of fractional derivatives. This opened the way to an even more insightful and important investigation of the phenomena in microgravity. Recent results include interacting particles, particle-wall interactions, bubbles, and Reynolds numbers larger than unity. The Space Station provides an ideal environment for SHIVA. Limited ground experiments have already confirmed some aspects of the theory. In general the space environment is required for the overall experiment, especially for cases containing very heavy particles, very light particles, bubbles, collections of particles and for characterization of the space environment and its effect on particle experiments. Lightweight particles and bubbles typically rise too fast in a gravitational field and heavy particles sink too fast. In a microgravity environment, heavy and light particles can be studied side-by-side for long periods of time.

Rangel, Roger↗

SHIVA-(Spaceflight Holography in a Virtual Apparatus)

SHIVA (Spaceflight Holography Investigation in a Virtual Apparatus) will expand our understanding of the fundamental physics of particle movement in fluids by exploiting the power of holography in a spaceflight experiment'. In addition, the study will exploit the movement of particles in fluids to observe and quantify microgravity phenomena that are extremely important in materials sciences with applications both in space and on earth. The regime under scrutiny is the low Reynolds number, Stokes regime or creeping flow, which covers particles and bubbles moving at very low velocity. The equations describing this important regime have been under development and investigation for over 100 years and yet a complete analytical solution of the general equation had remained elusive yielding only approximations and numerical solutions. In the course of the ongoing NASA NRA, the first analytical solution of the general equation was produced by members of the investigator team using the mathematics of fractional derivatives. This opened the way to an even more insightful and important investigation of the phenomena in microgravity.

Trolinger, James D.↗

Modal Analysis and Correlation of International Space Station Early Configurations

This paper will summarize the modal analysis and model refinement results for the International Space Station (ISS) Flight-2A mated configuration. To maintain structural integrity of the ISS, structural loading distributions have been rigorously analyzed through numerical simulation and taken into account during the design of the structure and mission operations. The accuracy of the analysis results is directly affected by the precision of mathematical models and estimated input forces. A mathematical model of an ISS configuration is composed of individual component math models. Each component model is required to be correlated with ground test data.

Kaouk, Mohamed↗

A Statistical Treatment of Bioassay Pour Fractions

The binomial probability distribution is used to treat the statistics of a microbiological sample that is split into two parts, with only one part evaluated for spore count. One wishes to estimate the total number of spores in the sample based on the counts obtained from the part that is evaluated (pour fraction). Formally, the binomial distribution is recharacterized as a function of the observed counts (successes), with the total number (trials) an unknown. The pour fraction is the probability of success per spore (trial). This distribution must be renormalized in terms of the total number. Finally, the new renormalized distribution is integrated and mathematically inverted to yield the maximum estimate of the total number as a function of a desired level of confidence ( P(<n)=LOC ). Selected results of the indicated numerical calculations are presented. For LOC=0.5, or the likely value, the estimates differ little from the usual calculation: the number of spores counted divided by the pour fraction. The extension to recovery efficiency corrections is also presented. Now the product of recovery efficiency and pour fraction may be small enough that the likely value may be much larger than the usual calculation: the number of spores divided by that product. The use of this analysis would not be limited to microbiological data.

000000↗

A parallel strategy for density functional theory computations on accelerated nodes

Using the Löwdin orthonormalization of tall-skinny matrices as a proxy-app for wavefunction-based Density Functional Theory solvers, we investigate a distributed memory parallel strategy focusing on Graphics Processing Unit (GPU)-accelerated nodes as available on some of the top ranked supercomputers at the present time. Here we present numerical results in the strong limit regime, as it is particularly relevant for First-Principles Molecular Dynamics. We also examine how matrix product-based iterative solvers provide a competitive alternative to dense eigensolvers on GPUs, allowing to push the strong scaling limit of these computations to a larger number of distributed tasks. Our strategy, which relies on replicated Gram matrices and efficient collective communications using the NCCL library, leads to a time-to-solution under 0.5 s for the Löwdin orthonormalization of a tall-skinny matrix of 3000 columns on Summit at Oak Ridge Leadership Facility (OLCF). Given the similarity in computational operations between one iteration of a DFT solver and this proxy-app, this shows the possibility of solving accurately the DFT equations well under a minute for 3000 electronic wave functions, and thus perform First-Principles molecular dynamics of physical systems much larger than traditionally solved on CPU systems.

97 MATHEMATICS AND COMPUTING↗

Multiresolution convolutional autoencoders

Herein we propose a multi-resolution convolutional autoencoder (MrCAE) architecture that integrates and leverages three highly successful mathematical architectures: (i) multigrid methods, (ii) convolutional autoencoders and (iii) transfer learning. The method provides an adaptive, hierarchical architecture that capitalizes on a progressive training approach for multiscale spatio-temporal data. This framework allows for inputs across multiple scales: starting from a compact (small number of weights) network architecture and low-resolution data, our network progressively deepens and widens itself in a principled manner to encode new information in the higher resolution data based on its current performance of reconstruction. Basic transfer learning techniques are applied to ensure information learned from previous training steps can be rapidly transferred to the larger network. As a result, the network can dynamically capture different scaled features at different depths of the network. The performance gains of this adaptive multiscale architecture are illustrated through a sequence of numerical experiments on synthetic examples and real-world spatial-temporal data.

97 MATHEMATICS AND COMPUTING↗

HPC-enabled computation of demand models at scale

The purpose of this project is to examine the energy impact of urban-scale traffic for the Los Angeles Basin by developing and implementing a scalable traffic assignment model. An energy optimization function will be posed and when integrated into the optimization code for travel assignment it can be mathematically proven to converge. The energy optimization function can then be compared to the typical travel time optimization that is traditionally used in traffic assignment models. The analysis will begin with static traffic assignment models with the routing for all origin and destinations computed in parallel on high performance computing facilities. Convergence of the numerical methods rely on the solution of convex programs (or extensions of these). This step will mostly consist of demonstrating the ability to parallelize the Frank Wolfe algorithm on various platforms.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Asymptotic hydrogen redistribution analysis in yttrium-hydride-moderated heat-pipe-cooled microreactors using DireWolf

Yttrium hydride (YH x ) is one of the materials being considered for moderating thermal and epithermal nuclear microreactors. One potential issue with YH x use is that the hydrogen redistributes in the hydride when thermal and concentration gradients are present. This hydrogen redistribution leads to spatial gradients in the hydrogen concentration, thus affecting neutron transport in the reactor. Here, by building upon observations in prior works, this paper aims to gain a better understanding of the reactivity feedback associated with such hydrogen redistributions. In particular, we wish to understand the sign (+/–) of the hydrogen redistribution neutronic feedback, its order of magnitude, and its underlying physical causes. To achieve this goal, the DireWolf multiphysics software driver was used to solve the coupled radiation transport, heat transfer, heat pipe two-phase flow, and hydrogen redistribution equations for the Simplified Microreactor Benchmark Assessment (SiMBA) problem, a full-core microreactor numerical benchmark developed at Idaho National Laboratory.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Learning viscoelasticity models from indirect data using deep neural networks

In this study, we propose a novel approach to model viscoelasticity materials, where rate-dependent and non-linear constitutive relationships are approximated with deep neural networks. We assume that inputs and outputs of the neural networks are not directly observable, and therefore common training techniques with input–output pairs for the neural networks are inapplicable. To that end, we develop a novel computational approach to both calibrate parametric and learn neural-network-based constitutive relations of viscoelasticity materials from indirect displacement data in the context of multiple-physics systems. We show that limited displacement data holds sufficient information to quantify the viscoelasticity behavior. We formulate the inverse computation – modeling viscoelasticity properties from observed displacement data – as a PDE-constrained optimization problem and minimize the error functional using a gradient-based optimization method. The gradients are computed by a combination of automatic differentiation and implicit function differentiation rules. The effectiveness of our method is demonstrated through numerous benchmark problems in geomechanics and porous media transport.

97 MATHEMATICS AND COMPUTING↗

A mass–momentum consistent coupling for mesh-adaptive two-phase flow simulations

Here, we present a novel mass-momentum consistent coupling between a geometric volume-of-fluid scheme and an incompressible flow solver with differing directional-splitting approaches. The advection of the volume fraction is performed using a direction-split algorithm, whereas the momentum advection algorithm uses a traditional unsplit, fractional-step approach. Both algorithms employ finite-volume discretizations based on Cartesian meshes. In solving the mass-momentum consistency problem, momentum fluxes at the cell faces are weighted by the density fluxes based on the already advected volume fraction. The success of our approach lies on introducing a Favre-averaged velocity interpolation at the liquid/gas interface along with a minmod slope limiter. Mesh-convergence studies show that when the minmod slope limiter is used, the two-phase solver retains an accuracy between first and second order, but when a purely upwind scheme is considered, its accuracy drops to first order. Finally, after considering several validation problems, the solver is shown to agree well with reference numerical and experimental data while retaining its robustness and efficiency.

97 MATHEMATICS AND COMPUTING↗

Data-Driven Distributed Algorithms for Estimating Eigenvalues and Eigenvectors of Interconnected Dynamical Systems

Here, the paper presents data-driven algorithms to estimate in a distributed manner the eigenvalues, right and left eigenvectors of an unknown linear (or linearized) interconnected dynamic system. In particular, the proposed algorithms do not require the identification of the system model in advance before performing the estimation. As a first step, we consider interconnected dynamical system with distinct eigenvalues. The proposed strategy first estimates the eigenvalues using the well-known Prony method. The right and left eigenvectors are then estimated by solving distributively a set of linear equations. One important feature of the proposed algorithms is that the topology of communication network used to perform the distributed estimation can be chosen arbitrarily, given that it is connected, and is also independent of the structure or sparsity of the system (state) matrix. The proposed distributed algorithms are demonstrated via a numerical example.

97 MATHEMATICS AND COMPUTING↗