Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “monolayers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Chemical intuition for high thermoelectric performance in monolayer black phosphorus, α-arsenene and aW-antimonene

Identifying materials with intrinsically high thermoelectric performance remains a challenge even with the aid of a high-throughput search. Here, using a chemically intuitive approach based on the bond-orbital theory, three anisotropic 2D group-V materials (monolayer black phosphorus, α-arsenene, and aW-antimonene) are identified as candidates for high thermoelectric energy conversion efficiency. Concepts, such as bond length, bond angle, and bond strength, are used to explain the trends in their electronic properties, such as the band gap and the effective mass. Our first principles calculations confirm that high carrier mobilities and large Seebeck coefficients can be obtained at the same time in these materials, due to complex Fermi surfaces originating from the anisotropic structures. An intuitive understanding of how the bonding character affects phonon transport is also provided with emphasis on the importance of bonding strength and bond anharmonicity. High thermoelectric performance is observed in these materials. In conclusion, our approach provides a powerful tool to identify new thermoelectric materials and evaluate their transport properties.

30 DIRECT ENERGY CONVERSION↗

High carrier mobility in monolayer CVD-grown MoS 2 through phonon suppression

Mobility engineering is one of the most important challenges that determine the optoelectronic performance of two-dimensional (2D) materials. So far, charged-impurity scattering and electrical-contact barriers have been suppressed through high-κ dielectrics and seamless contact engineering, giving rise to carrier-mobility improvement in exfoliated 2D semiconducting MoS 2 . Here we demonstrate a facile and scalable technique to effectively suppress both Coulomb scattering and electron–phonon scattering via the HfO 2 overlayer, resulting in a large mobility improvement in CVD-grown monolayer MoS 2 , in excess of 60 cm 2 V -1 s -1 . Surface passivation and suppression of Coulomb scattering can partially contribute to the mobility increase. Interestingly, we correlate the mobility increase with phonon quenching through Raman and temperature-dependent mobility measurements. The experimental method is facile, industrially scalable, and renders phonon engineering an additional leverage towards further improvements in 2D semiconductor mobility and device performance.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Correlating the electrocatalytic stability of platinum monolayer catalysts with their structural evolution in the oxygen reduction reaction

Platinum monolayer (Pt ML ) core–shell electrocatalysts for the oxygen reduction reaction (ORR) have attracted great attention because of their exceptional activity and stability for promising practical applications in fuel cells. In this paper, we describe our in-depth investigation of the relationship between the ORR activity and structure of the Pt ML /Pd/C catalyst during the stability test. By virtue of the rotating disk electrode technique, an accelerated degradation test with the potential window of 0.65 to 1.05 V was applied to the Pt ML /Pd/C to interrogate its long-term reliability in the ORR, the change of its electrochemical surface area, and its surface composition and components. The Pt ML /Pd/C catalyst displayed a volcano-like mass/dollar activity profile in the stability test up to 100k cycles. The overall loss of the activity was recorded to be as low as 17% of the initial value. The ORR activity increased in the initial 20k cycles because the freshly prepared Pt ML did not entirely encompass the whole Pd core, but it was integrated to a full coverage with a more stable configuration during the potential cycling owing to its self-healing property. Then, the activity decreased at a much slower rate than the standard Pt/C because the Pd–Pt core–shell structure due to its structural self-retaining property remained intact and impeded the electrochemical Ostwald ripening of the entire particles. Changes in the morphology and configuration of Pt ML were mapped by combining our experimental investigation with model analyses. Finally, the proposed self-healing and self-retaining mechanisms account for the structure-dependent stability in the ORR and play cornerstone roles in formulating ORR core–shell electrocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Discovery of twin orbital-order phases in ferromagnetic semiconducting VI 3 monolayer

Spontaneous orbital symmetry breaking in crystals gives rise to abundant novel and interesting physical properties, which sometimes are concealed by the absence of geometrical distortions. We show that a recently discovered 3d 2 system, namely the layered VI 3 ferromagnetic semiconductor, is a strongly correlated and orbital ordering system. Our analysis reveals that in a VI 3 -like system, there could be two types of orbital splitting, which are stabilized respectively by strong electronic correlation and inter-atomic exchange interactions. Consequently, on the basis of first-principles calculations, two competing low-energy phases of VI 3 monolayer (denoted as twin orbital-order phases) are discovered, in which the metal–insulator transition is driven by strong electronic correlation, and the orbital symmetry breaking is robust against geometrical distortions. In addition, similar phenomena are also observed in other VI 3 -like systems. These findings shed light on the unusual electronic behavior of a strongly correlated 2D system and will be interesting for nanoscale multi-functional spintronic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Transition-metal phthalocyanine monolayers as new Chern insulators

To explore new materials for the realization of the quantum anomalous Hall effect (QAHE), we studied the electronic, magnetic and topological properties of transition-metal phthalocyanine (TMPc) monolayers in a square lattice. Many of them have large topologically nontrivial band gaps and integer Chern numbers. In particular, the Fermi level of MoPc lies right in the band gap (E g = 8.1 meV) and has large magnetic anisotropy energy (MAE = 2.0 meV per Mo atom) and a Curie temperature of 16 K, showing its usefulness for applications. The presence of the topologically protected edge state in a MoPc nanoribbon further confirms it as a new two-dimensional topological insulator. This much widens the search for QAHE materials for the design of quantum devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Photo-driven growth of a monolayer of platinum spherical-nanocrowns uniformly coated on a membrane toward fuel cell applications

Membrane electrode assemblies (MEAs) serve as the core units of polymer electrolyte membrane fuel cells (PEMFCs) and are regularly fabricated by painting a slurry of commercial Pt/C onto a membrane, leading to thick and disordered electrocatalyst layers (CLs). Herein, we report a photo-driven fabrication of MEAs with ultra-thin and ordered CLs by growing a monolayer of dendritic platinum spherical nanocrowns onto each side of a photocatalyst-modified membrane. This approach allows us to control the thickness and platinum loading of ordered CLs by simply varying the concentration of the platinum precursor under tungsten light irradiation. The resultant MEAs exhibit an excellent fuel cell power density of 1.01 ± 0.05 W cm –2 at a platinum loading of 53 ± 1.5 μg cm cathode –2 . Furthermore, this exceptional activity likely arises from the nanostructured platinum crowns, efficient mass transport, and uniform reaction rate in the ultrathin (59 ± 12 nm thick) and ordered CLs according to electrochemical and theoretical investigations.

25 ENERGY STORAGE↗

Bandgap recovery of monolayer MoS 2 using defect engineering and chemical doping

Two-dimensional transition metal dichalcogenide materials have created avenues for exciting physics with unique electronic and photonic applications. Among these materials, molybdenum disulfide is the most known due to extensive research in understanding its electronic and optical properties. In this paper, we report on the successful growth and modification of monolayer MoS 2 (1L MoS 2 ) by controlling carrier concentration and manipulating bandgap in order to improve the efficiency of light emission. Atomic size MoS 2 vacancies were created using a Helium Ion Microscope, then the defect sites were doped with 2,3,5,6-tetrafluro7,7,8,8-tetracyanoquinodimethane (F4TCNQ). The carrier concentration in intrinsic (as-grown) and engineered 1L MoS 2 was calculated using Mass Action model. The results are in a good agreement with Raman and photoluminescence spectroscopy as well as Kelvin probe force microscopy characterizations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Deconstructing proton transport through atomically thin monolayer CVD graphene membranes

Selective proton (H + ) permeation through the atomically thin lattice of graphene and other 2D materials offers new opportunities for energy conversion/storage and novel separations. Practical applications necessitate scalable synthesis via approaches such as chemical vapor deposition (CVD) that inevitably introduce sub-nanometer defects, grain boundaries and wrinkles, and understanding their influence on H + transport and selectivity for large-area membranes is imperative but remains elusive. Using electrically driven transport of H + and potassium ions (K + ) we probe the influence of intrinsic sub-nanometer defects in monolayer CVD graphene across length-scales for the first time. At the micron scale, the areal H + conductance of CVD graphene (~4.5-6 mS cm -2 ) is comparable to that of mechanically exfoliated graphene indicating similarly high crystalline quality within a domain, albeit with K + transport (~1.7 mS cm -2 ). However, centimeter-scale Nafion|graphene|Nafion devices with several graphene domains show areal H + conductance of ~339 mS cm -2 and K + conductance of ~23.8 mS cm -2 (graphene conductance for H + is ~1735 mS cm -2 and for K + it is ~47.6 mS cm -2 ). Using a mathematical-transport-model and Nafion filled polycarbonate track etched supports, we systematically deconstruct the observed orders of magnitude increase in H + conductance for centimeter-scale CVD graphene. The mitigation of defects (>1.6 nm), wrinkles and tears via interfacial polymerization results in a conductance of ~1848 mS cm -2 for H + and ~75.3 mS cm -2 for K + (H + /K + selectivity of ~24.5) via intrinsic sub-nanometer proton selective defects in CVD graphene. We demonstrate atomically thin membranes with significantly higher ionic selectivity than state-of-the-art proton exchange membranes while maintaining comparable H + conductance. Our work provides a new framework to assess H + conductance and selectivity of large-area 2D membranes and highlights the role of intrinsic sub-nanometer proton selective defects for practical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic properties of CrX 3 (X = Cl, Br, I) monolayers in excited states

The presence of intrinsic ferromagnetism in a new class of magnetic semiconductors CrX 3 (X = Cl, Br, I) in a reduced dimension is associated with magnetic anisotropy energy (MAE). MAE is relevant for the magnetic order of CrX 3 . The control of magnetism in such 2D materials through external stimuli is gaining importance in view of potential technological applications. Here, we use all-electron density functional theory to investigate the magnetism of monolayers of chromium halides in excited states using a cluster model. We study the magnetization reversal barrier for two types of electronic singly excited states: (a) spin-preserving transitions, and (b) spin-flip transitions. While all the three halides show enhancement of MAE in excited states, the MAEs are significant for CrI 3 due to the large spin–orbit coupling in the iodines. The changes in the MAE in the excited state are influenced by the local charge distribution surrounding the iodine atoms. Using a model system, we also show that the MAE in chromium tri-iodides is strongly influenced by the charge transfer to the iodines in an excited state. Furthermore, controlling the charge transfer to the iodines can potentially be used to control the magnetization reversal barrier.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phonon-mediated ultrafast dynamics in self-assembled monolayers of 4-mercaptobenzoic acid on gold

Non-equilibrium interactions between plasmonic metals and adsorbed molecules lie at the heart of emerging applications such as plasmonic photocatalysis and sensing, though the ultrafast charge and energy transfer mechanisms arising from these interactions are not well understood. Herein, we investigate the ultrafast dynamics of Au nano-islands tethered with a self-assembled monolayer (SAM) of electron-withdrawing 4-mercaptobenzoic acid (4MBA) molecules. Ultrafast UV-visible transient absorption spectroscopy following excitation of the interband transition in Au reveals three well-known, characteristic time constants that quantify electron–electron (el–el), electron–phonon (el–ph) and phonon–phonon (ph–ph) scattering lifetimes. When comparing the dynamics of bare Au and 4MBA-Au, we find that the el–ph and ph–ph scattering lifetimes are notably longer in 4MBA-Au. Density functional perturbation theory calculations ascribe the elongation in el–ph lifetimes in 4MBA-Au to the significant coupling of acoustic phonon modes of Au with certain molecular vibrations of 4MBA, leading to decreased spatial overlap between carrier electronic states and the acoustic modes. We speculate that the elongation of ph–ph scattering lifetimes in 4MBA-Au arises due to poor thermal conductivity of the SAM which disrupts efficient energy dissipation from Au to the environment, thus slowing down the thermalization of phonons. This work provides a glimpse into how molecular adsorbates modify the charge carrier and phonon dynamics of Au and sets the stage for further systematic exploration of plasmonic metal–molecule interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electron-doping-induced destabilization of the dimerized insulating state in monolayer IrTe 2

The ability to tune the electronic phases of two-dimensional (2D) materials through external perturbations provides a powerful route to engineer functional nanoscale systems. In particular, the ground state of monolayer (ML) 1T-IrTe 2 is highly sensitive to the interplay between local chemical bonding and global electronic topology, leading to a unique 2 × 1 dimerized insulating phase. Here, we present an angle-resolved photoemission study on the evolution of the electronic structure in ML IrTe 2 induced by in situ Rb adsorption. We find that Rb adsorption suppresses the 2 × 1 dimerized phase in ML IrTe 2 , inducing a clear insulator-to-metal transition. This transition is characterized by a reconstruction of the band topology toward a bilayer-like metallic configuration. Combined with first-principles calculations, our results demonstrate that the collapse of the insulating state originates from Ir valence change and suppression of Fermi surface nesting-driven instabilities. Our findings establish ML IrTe 2 as a model system for investigating instability-driven phase control in 2D materials and highlight its potential for tunable electronic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Energy Level Alignment of Organic Semiconductor/Metal Interfaces: Effect of Polar Self-Assembled Monolayers at the Interface

We determined the shifts in the energy levels of {approx} 15 nm thick poly[2-methoxy-5-(2'-ethyl-hexyloxy)-1,4-phenylene vinylene] films deposited on various substrates including self-assembled monolayer (SAM) modified Au surfaces using photoelectron spectroscopy. As the unmodified substrates included Au, indium tin oxide, Si (with native oxide), and Al (with native oxide), a systematic shift in the detected energy levels of the organic semiconductor was observed to follow the work function values of the substrates. Furthermore, we used polar SAMs to alter the work function of the Au substrates. This suggests the opportunity to control the energy level positions of the organic semiconductor with respect to the electrode Fermi level. Photoelectron spectroscopy results showed that, by introducing SAMs on the Au surface, we successfully increased and decreased the effective work function of Au surface. We found that in this case, the change in the effective work function of the metal surface was not reflected as a shift in the energy levels of the organic semiconductor, as opposed to the results achieved with different substrate materials. Our study showed that when a substrate is modified by SAMs (or similarly by any adsorbed molecules), a new effective work function value is achieved; however, it does not necessarily imply that the new modified surface will behave similar to a different metal where the work function is equal to the effective work function of the modified surface. Various models and their possible contribution to this result are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗