Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mirror”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Stellar reaction rate for {sup 22}Mg+p->{sup 23}Al from the asymptotic normalization coefficient in the mirror nuclear system {sup 22}Ne+n->{sup 23}Ne

The production of {sup 22}Na in ONe novae can be influenced by the {sup 22}Mg(p,gamma){sup 23}Al reaction. To investigate this reaction rate at stellar energies, we have determined the asymptotic normalization coefficient (ANC) for {sup 22}Mg+p->{sup 23}Al through measurements of the ANCs in the mirror nuclear system {sup 22}Ne+n->{sup 23}Ne. The peripheral neutron-transfer reactions {sup 13}C({sup 12}C,{sup 13}C){sup 12}C and {sup 13}C({sup 22}Ne,{sup 23}Ne){sup 12}C were studied. The identical entrance and exit channels of the first reaction make it possible to extract independently the ground-state ANC in {sup 13}C. Our experiment gives C{sub p{sub 1/2}}{sup 2}({sup 13}C)=2.24+-0.11 fm{sup -1}, which agrees with the value obtained from several previous measurements. The weighted average for all the obtained C{sub p{sub 1/2}}{sup 2} is 2.31+-0.08 fm{sup -1}. This value is adopted to be used in obtaining the ANCs in {sup 23}Ne. The differential cross sections for the reaction {sup 13}C({sup 22}Ne,{sup 23}Ne){sup 12}C leading to the J{sup {pi}}=5/2{sup +} and 1/2{sup +} states in {sup 23}Ne have been measured at 12 MeV/u. Optical model parameters for use in the DWBA calculations were obtained from measurements of the elastic scatterings {sup 22}Ne+{sup 13}C and {sup 22}Ne+{sup 12}C. The extracted ANC for the ground state in {sup 23}Ne, C{sub d{sub 5/2}}{sup 2}=0.86+-0.08+-0.12 fm{sup -1}, is converted to its corresponding value in {sup 23}Al using mirror symmetry to give C{sub d{sub 5/2}}{sup 2}({sup 23}Al)=(4.63+-0.77)x10{sup 3} fm{sup -1}. The astrophysical S factor S(0) for the {sup 22}Mg(p,gamma) reaction was determined to be 0.96+-0.11 keV b. The consequences for nuclear astrophysics are discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Isospin symmetry breaking at high spins in the mirror pair {sup 67}Se and {sup 67}As

Recent experimental data have revealed large mirror energy differences (MED) between high-spin states in the mirror nuclei {sup 67}Se and {sup 67}As, the heaviest pair where MED have been determined so far. The MED are generally attributed to the isospin symmetry breaking caused by the Coulomb force and by the isospin-nonconserving part of the nucleon-nucleon residual interaction. The different contributions of the various terms have been extensively studied in the fp shell. By employing large-scale shell-model calculations, we show that the inclusion of the g{sub 9/2} orbit causes interference between the electromagnetic spin-orbit and the Coulomb monopole radial terms at high spin. The large MED are attributed to the aligned proton pair excitations from the p{sub 3/2} and f{sub 5/2} orbits to the g{sub 9/2} orbit. The relation of the MED to deformation is discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Quantum radiation reaction force on a one-dimensional cavity with two relativistic moving mirrors

We consider a real massless scalar field inside a cavity with two moving mirrors in a two-dimensional spacetime, satisfying the Dirichlet boundary condition at the instantaneous position of the boundaries, for arbitrary and relativistic laws of motion. Considering vacuum as the initial field state, we obtain formulas for the exact value of the energy density of the field and the quantum force acting on the boundaries, which extend results found in previous papers [D. T. Alves, E. R. Granhen, H. O. Silva, and M. G. Lima, Phys. Rev. D 81, 025016 (2010); L. Li and B.-Z. Li, Phys. Lett. A 300, 27 (2002); L. Li and B.-Z. Li, Chin. Phys. Lett. 19, 1061 (2002); L. Li and B.-Z. Li, Acta Phys. Sin. 52, 2762 (2003); C. K. Cole and W. C. Schieve, Phys. Rev. A 64, 023813 (2001)]. For the particular cases of a cavity with just one moving boundary, nonrelativistic velocities, or in the limit of infinity length of the cavity (a single mirror), our results coincide with those found in the literature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mirror Symmetry Breaking and Restoration: The Role of Noise and Chiral Bias

The nonequilibrium effective potential is computed for the Frank model of spontaneous mirror symmetry breaking (SMSB) in chemistry in which external noise is introduced to account for random environmental effects. When these fluctuations exceed a critical magnitude, mirror symmetry is restored. The competition between ambient noise and the chiral bias due to physical fields and polarized radiation can be explored with this potential.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Single Atom as a Mirror of an Optical Cavity

By tightly focusing a laser field onto a single cold ion trapped in front of a far-distant dielectric mirror, we could observe a quantum electrodynamic effect whereby the ion behaves as the optical mirror of a Fabry-Perot cavity. We show that the amplitude of the laser field is significantly altered due to a modification of the electromagnetic mode structure around the atom in a novel regime in which the laser intensity is already changed by the atom alone. We propose a direct application of this system as a quantum memory for single photons.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mirror Mode Expansion in Planetary Magnetosheaths: Bohm-like Diffusion

Observed scale sizes of mirror modes in planetary magnetosheaths tend to be equal or larger than those that correspond to the maximum growth rate of the mirror instability: 9 {rho}{sub p} (proton gyroradius). These phenomena can be accounted for by introducing a diffusion process (Bohm) that shifts the spectra to lower wave numbers as the mode convects away from the source to the observation point. The theory is applied to data obtained in the magnetosheaths of Earth, Jupiter, Saturn, and the heliosheath, and shown to provide reasonable agreement to past spacecraft observations. Further observational tests of the theory are suggested.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The inverse problem of bimorph mirror tuning on a beamline

One of the challenges of tuning bimorph mirrors with many electrodes is that the calculated focusing voltages can be different by more than the safety limit (such as 500 V for the mirrors used at 17-ID at the Advanced Photon Source) between adjacent electrodes. A study of this problem at 17-ID revealed that the inverse problem of the tuning in situ, using X-rays, became ill-conditioned when the number of electrodes was large and the calculated focusing voltages were contaminated with measurement errors. Increasing the number of beamlets during the tuning could reduce the matrix condition number in the problem, but obtaining voltages with variation below the safety limit was still not always guaranteed and multiple iterations of tuning were often required. Applying Tikhonov regularization and using the L-curve criterion for the determination of the regularization parameter made it straightforward to obtain focusing voltages with well behaved variations. Some characteristics of the tuning results obtained using Tikhonov regularization are given in this paper.

43 PARTICLE ACCELERATORS↗

Diaboloidal mirrors: algebraic solution and surface shape approximations

A new type of optical element that can focus a cylindrical wave to a point focus (or vice versa) is analytically described. Such waves are, for example, produced in a beamline where light is collimated in one direction and then doubly focused by a single optic. A classical example in X-ray optics is the collimated two-crystal monochromator, with toroidal mirror refocusing. The element here replaces the toroid, and in such a system provides completely aberration free, point-to-point imaging of rays from the on-axis source point. We present an analytic solution for the mirror shape in its laboratory coordinate system with zero slope at the centre, and approximate solutions, based on bending an oblique circular cone and a bent right circular cylinder, that may facilitate fabrication and metrology.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Multilayer X-ray mirrors for the (4.4-5)-nm carbon-window spectral region

Cr/C-based multilayer X-ray mirrors intended for the reflection of X-ray radiation in the 'carbon-window' spectral region ({lambda} = 4.4-5 nm) are fabricated and studied. The structures are formed by magnetron sputtering at different deposition parameters. Under normal incidence, record reflection coefficients up to 15% are reached. The structural parameters of the mirrors are investigated by reflectometry at wavelengths of 0.154 and 4.47 nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fiber laser cleaning of metal mirror surfaces for optical diagnostic systems of the ITER

The results of experimental studies into efficiency of removal of films with a complex composition from metal mirrors by pulsed fiber laser irradiation are presented. It is shown that the initial reflectivity of optical elements can be restored by the selection of modes of irradiation impacting the surface with the sputtered film. Effective cleaning is performed by radiation with a power density lower than 10{sup 7} W/cm{sup 2}. The removal of contaminations at such a relatively low power density occurs in a solid phase, owing to which the thermal effect on the mirror is insignificant.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Development of a laser cleaning method for the first mirror surface of the charge exchange recombination spectroscopy diagnostics on ITER

A set of optical diagnostics is expected for measuring the plasma characteristics in ITER. Optical elements located inside discharge chambers are exposed to an intense radiation load, sputtering due to collisions with energetic atoms formed in the charge transfer processes, and contamination due to recondensation of materials sputtered from different parts of the construction of the chamber. Removing the films of the sputtered materials from the mirrors with the aid of pulsed laser radiation is an efficient cleaning method enabling recovery of the optical properties of the mirrors. In this work, we studied the efficiency of removal of metal oxide films by pulsed radiation of a fiber laser. Optimization of the laser cleaning conditions was carried out on samples representing metal substrates polished with optical quality with deposition of films on them imitating the chemical composition and conditions expected in ITER. It is shown that, by a proper selection of modes of radiation exposure to the surface with a deposited film, it is feasible to restore the original high reflection characteristics of optical elements.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Manifestation of Nonuniversality of Lepton Interactions in Spontaneously Violated Mirror Symmetry

Data from the LHCb experiments are indicative of a substantial distinction between the B → K (or K*) + e{sup +}e{sup −} and B → K (or K*) + μ{sup +}μ{sup −} branching ratios (April 2017). The branching ratio for the e+e− channel is substantially greater than that for the μ{sup +}μ{sup −} channel, whereas Standard Model (SM) calculations require that they be equal to each other. The above distinction may suggest the existence of a new interaction changing generations and discriminating between leptons that has couplings that are much greater than and are inverse in strength to the SM fermion couplings to the Higgs boson. Under conditions of spontaneously violated mirror symmetry, the coupling of SM particles to the second Higgs scalar that is inevitably present there and which is in principle heavy possesses precisely these properties. An inverse character of this coupling and its strength are not an additional hypothesis but a necessary condition for qualitatively reproducing, in addition, the observed charged-lepton mass hierarchy and the structure of weak lepton mixing—the Pontecorvo–Maki–Nakagawa–Sakata (PMNS) matrix. Within the mirror model being considered, all properties of the new interaction, including its inverse character, are due to the hierarchical character of the quark and charged-lepton mass spectrum.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Pulsed semiconductor lasers with higher optical strength of cavity output mirrors

Asymmetric heterostructures with an ultrathick waveguide based on an AlGaAs/GaAs alloy system that allow lasing at a wavelength of 905 nm have been developed and fabricated by hydride metalorganic vapor-phase epitaxy. The internal optical loss and internal quantum efficiency of semiconductor lasers based on such structures were 0.7 cm{sup -1} and 97%, respectively. It is shown that the highest output optical power of laser diodes with antireflecting (SiO{sub 2}) and reflecting (Si/SiO{sub 2}) coatings deposited on untreated Fabry-Perot cavity facets obtained by cleaving in an oxygen atmosphere reached 67 W in the pulsed mode and is limited by mirror damage. Treatment of Fabry-Perot cavity facets by etching in argon plasma and the formation of coatings with passivating and oxygen-blocking GaN and Si{sub 3}N{sub 4} layers allowed an increase in the maximum output optical power to 120 W. Mirror damage was not observed at the attained output optical power.

36 MATERIALS SCIENCE↗

Beryllium as a Material for Thermally Stable X-Ray Mirrors

Thermophysical and mechanical characteristics of beryllium are compared with the corresponding characteristics of promising materials that are used for fabrication of precision mirrors working under high-intensity electromagnetic irradiation. Advantages and prospects for application of beryllium in the third- and fourth-generation synchrotrons are discussed. An original method for fabrication of ultrasmooth surfaces of beryllium substrates is presented, and limiting roughnesses are reported. Reflectances at a wavelength of 13.5 nm are determined for a multilayer Mo/Si mirror deposited on the beryllium substrate. Prospects for improving quality of polishing of beryllium substrates are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of Thermal Annealing on the Properties of Multilayer Mo/Be Mirrors

The influence of thermal action on X-ray optics performance and structure of films and transition regions in multilayer Mo/Be mirrors optimized for a reflection maximum in the interval 11.2–11.4 nm at normal incidence has been considered. The annealing temperature reached 300°C and the annealing time was 1 and 4 h. It has been shown that after thermal annealing in vacuum for 1 h at 300°C, the reflection coefficient rises; however, when the annealing time grows to 4 h, it drops. Grains in molybdenum films become finer, and the profiles of transition regions change from exponential to linear. The period of multilayer mirrors has remained the same under all annealing conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Application of maximum likelihood reconstruction of subaperture data for measurement of large flat mirrors

Interferometers accurately measure the difference between two wavefronts, one from a reference surface and the other from an unknown surface. If the reference surface is near perfect or is accurately known from some other test, then the shape of the unknown surface can be determined. We investigate the case where neither the reference surface nor the surface under test is well known. By making multiple shear measurements where both surfaces are translated and/or rotated, we obtain sufficient information to reconstruct the figure of both surfaces with a maximum likelihood reconstruction method. The method is demonstrated for the measurement of a 1.6 m flat mirror to 2 nm rms, using a smaller reference mirror that had significant figure error.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ion polished Cr/Sc attosecond multilayer mirrors for high water window reflectivity

Recent advances in the development of attosecond soft X-ray sources ranging into the water window spectral range, between the 1s states of carbon and oxygen (284 eV–543 eV), are also driving the development of suited broadband multilayer optics for steering and shaping attosecond pulses. The relatively low intensity of current High Harmonic Generation (HHG) soft X-ray sources calls for an efficient use of photons, thus the development of low-loss multilayer optics is of uttermost importance. Here, we report about the realization of broadband Cr/Sc attosecond multilayer mirrors with nearly atomically smooth interfaces by an optimized ion beam deposition and assisted interface polishing process. This yields to our knowledge highest multilayer mirror reflectivity at 300 eV near normal incidence. The results are verified by transmission electron microscopy (TEM) and soft/hard X-ray reflectometry.

36 MATERIALS SCIENCE↗

Applying Alpha-Channeling to Mirror Machines

The α-channeling effect entails the use of radio-frequency waves to expel and cool high-energetic α particles born in a fusion reactor; the device reactivity can then be increased even further by redirecting the extracted energy to fuel ions. Originally proposed for tokamaks, this technique has also been shown to benefit open-ended fusion devices. Here, the fundamental theory and practical aspects of α channeling in mirror machines are reviewed, including the influence of magnetic field inhomogeneity and the effect of a finite wave region on the α-channeling mechanism. For practical implementation of the α-channeling effect in mirror geometry, suitable contained weakly-damped modes are identified. In addition, the parameter space of candidate waves for implementing the α-channeling effect can be significantly extended through the introduction of a suitable minority ion species that has the catalytic effect of moderating the transfer of power from the α-channeling wave to the fuel ions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗