Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “material science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Topological nanophotonics for photoluminescence control

Rare-earth-doped nanocrystals are emerging light sources that can produce tunable emissions in colours and lifetimes, which has been typically achieved in chemistry and material science. However, one important optical challenge – polarization of photoluminescence – remains largely out of control by chemistry methods. Control over photoluminescence polarization can be gained via coupling of emitters to resonant nanostructures such as optical antennas and metasurfaces. However, the resulting polarization is typically sensitive to position disorder of emitters, which is difficult to mitigate. Recently, new classes of disorder-immune optical systems have been explored within the framework of topological photonics. Here we explore disorder-robust topological arrays of Mie-resonant nanoparticles for polarization control of photoluminescence of nanocrystals. We demonstrate polarized emission from rare-earth-doped nanocrystals governed by photonic topological edge states supported by zigzag arrays of dielectric resonators. We verify the topological origin of polarized photoluminescence by comparing emission from nanoparticles coupled to topologically trivial and nontrivial arrays of nanoresonators. We expect that our results may open a new direction in the study of topology-enable emission properties of topological edge states in many photonic systems.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Density-functional theory of material design: fundamentals and applications-I

This article is part-I of a review of density-functional theory (DFT) that is the most widely used method for calculating electronic structure of materials. The accuracy and ease of numerical implementation of DFT methods has resulted in its extensive use for materials design and discovery and has thus ushered in the new field of computational material science. In this article, we start with an introduction to Schrödinger equation and methods of its solutions. After presenting exact results for some well-known systems, difficulties encountered in solving the equation for interacting electrons are described. How these difficulties are handled using the variational principle for the energy to obtain approximate solutions of the Schrödinger equation is discussed. The resulting Hartree and Hartree–Fock theories are presented along with results they give for atomic and solid-state systems. We then describe Thomas–Fermi theory and its extensions which were the initial attempts to formulate many-electron problem in terms of electronic density of a system. Having described these theories, we introduce modern DFT by discussing Hohenberg–Kohn theorems that form its foundations. We then go on to discuss Kohn–Sham (KS) formulation of DFT in its exact form. Next, local density approximation (LDA) is introduced and solutions of KS equation for some representative systems, obtained using the LDA, are presented. We end part-I of the review describing the contents of part-II.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Direct observation of strong momentum-dependent electron-phonon coupling in a metal

Phonon scattering in metals is one of the most fundamental processes in materials science. However, understanding such processes has remained challenging and requires detailed information on interactions between phonons and electrons. We use an ultrafast electron diffuse scattering technique to resolve the nonequilibrium phonon dynamics in femtosecond–laser-excited tungsten in both time and momentum. We determine transient populations of phonon modes which show strong momentum dependence initiated by electron-phonon coupling. For phonons near Brillouin zone border, we observe a transient rise in their population on a timescale of approximately 1 picosecond driven by the strong electron-phonon coupling, followed by a slow decay on a timescale of approximately 8 picosecond governed by the weaker phonon-phonon relaxation process. We find that the exceptional harmonicity of tungsten is needed for isolating the two processes, resulting in long-lived nonequilibrium phonons in a pure metal. Our finding highlights that electron-phonon scattering can be the determinant factor in the phonon thermal transport of metals.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Comparing crystal structures with symmetry and geometry

Abstract Measuring the similarity between two arbitrary crystal structures is a common challenge in crystallography and materials science. Although there are an infinite number of ways to mathematically relate two crystal structures, only a few are physically meaningful. Here we introduce both a geometry-based and a symmetry-adapted similarity metric to compare crystal structures. Using crystal symmetry and combinatorial optimization we describe an algorithm to arrive at the structural relationship that minimizes these similarity metrics across all possible maps between any pair of crystal structures. The approach makes it possible to (i) identify pairs of crystal structures that are identical, (ii) quantitatively measure the similarity between crystal structures, and (iii) find and rank structural transformation pathways between any pair of crystal structures. We discuss the advantages of using the symmetry-adapted cost metric over the geometric cost. Finally, we show that all known structural transformation pathways between common crystal structures are recovered with the mapping algorithm. The methodology presented in this study will be of value to efforts that seek to catalogue crystal structures, identify structural transformation pathways or prune large first-principles datasets used to parameterize on-lattice Hamiltonians.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Instance Segmentation for Direct Measurements of Satellites in Metal Powders and Automated Microstructural Characterization from Image Data

In this work, we propose instance segmentation as a useful tool for image analysis in materials science. Instance segmentation is an advanced technique in computer vision which generates individual segmentation masks for every object of interest that is recognized in an image. Using an out-of-the-box implementation of Mask R-CNN, instance segmentation is applied to images of metal powder particles produced through gas atomization. Leveraging transfer learning allows for the analysis to be conducted with a very small training set of labeled images. As well as providing another method for measuring the particle size distribution, we demonstrate the first direct measurements of the satellite content in powder samples. After analyzing the results for the labeled data dataset, the trained model was used to generate measurements for a much larger set of unlabeled images. The resulting particle size measurements showed reasonable agreement with laser scattering measurements. The satellite measurements were self-consistent and showed good agreement with the expected trends for different samples. Finally, we present a small case study showing how instance segmentation can be used to measure spheroidite content in the UltraHigh Carbon Steel DataBase, demonstrating the flexibility of the technique.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Coupled polarization and nanodomain evolution underpins large electromechanical responses in relaxors

Understanding the evolution and role of nanoscale polar structures during polarization rotation in relaxor ferroelectrics is a long-standing challenge in materials science and condensed-matter physics. These nanoscale polar structures are characterized by polar nanodomains, which are believed to play a key role in enabling the large susceptibilities of relaxors. Here, using epitaxial strain, we stabilize the intermediate step during polarization rotation in epitaxial films of a prototypical relaxor and study the co-evolution of polarization and polar nanodomains. Our multimodal approach allows for a detailed examination of correlations between polarization and polar nanodomains; illuminates the effect of local chemistry, strain and electric field on their co-evolution; and reveals the underappreciated role of strain in enabling the large electromechanical coupling in relaxors. As the strain increases, the competition between chemistry-driven disorder and strain-driven order of the polar units intensifies, which is manifested in the coexistence of inclined and elongated polar nanodomains in the intermediate step of polarization rotation. Our findings establish that structural transitions between polar nanodomain configurations underpins the polarization rotation and large electromechanical coupling of relaxors.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A contorted nanographene shelter

Nanographenes have kindled considerable interest in the fields of materials science and supramolecular chemistry as a result of their unique self-assembling and optoelectronic properties. Encapsulating the contorted nanographenes inside artificial receptors, however, remains challenging. Herein, we report the design and synthesis of a trigonal prismatic hexacationic cage, which has a large cavity and adopts a relatively flexible conformation. It serves as a receptor, not only for planar coronene, but also for contorted nanographene derivatives with diameters of approximately 15 Å and thicknesses of 7 Å. A comprehensive investigation of the host-guest interactions in the solid, solution and gaseous states by experimentation and theoretical calculations reveals collectively an induced-fit binding mechanism with high binding affinities between the cage and the nanographenes. Notably, the photostability of the nanographenes is improved significantly by the ultrafast deactivation of their excited states within the cage. Encapsulating the contorted nanographenes inside the cage provides a noncovalent strategy for regulating their photoreactivity.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Continuous polyamorphic transition in high-entropy metallic glass

Polyamorphic transition (PT) is a compelling and pivotal physical phenomenon in the field of glass and materials science. Understanding this transition is of scientific and technological significance, as it offers an important pathway for effectively tuning the structure and property of glasses. In contrast to the PT observed in conventional metallic glasses (MGs), which typically exhibit a pronounced first-order nature, herein we report a continuous PT (CPT) without first-order characteristics in high-entropy MGs (HEMGs) upon heating. This CPT behavior is featured by the continuous structural evolution at the atomic level and an increasing chemical concentration gradient with temperature, but no abrupt reduction in volume and energy. The continuous transformation is associated with the absence of local favorable structures and chemical heterogeneity caused by the high configurational entropy, which limits the distance and frequency of atomic diffusion. As a result of the CPT, numerous glass states can be generated, which provides an opportunity to understand the nature, atomic packing, formability, and properties of MGs. Moreover, this discovery highlights the implication of configurational entropy in exploring polyamorphic glasses with an identical composition but highly tunable structures and properties.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Shaping the Future of Self-Driving Autonomous Laboratories Workshop

The "Shaping the Future of Self-Driving Autonomous Laboratories" workshop, held in Denver on November 7-8, 2024, brought together leading experts from materials science and computing to address the growing need to revolutionize scientific research through AI-driven autonomous laboratories. The workshop identified critical challenges, including the integration of heterogeneous data, development of AI systems that understand fundamental physical principles, and comprehensive safety protocols. Key recommendations emerged around developing universal laboratory equipment interfaces, implementing automated metadata collection systems, and creating hybrid AI approaches that combine data-driven learning with scientific principles. The workshop emphasized maintaining human oversight while leveraging automation, transforming scientific education to prepare the next generation of researchers, and establishing a national consortium leveraging DOE facilities as anchors for broader collaboration with academia and industry. Participants stressed the urgency of addressing the growing disconnect between human decision-making timescales and modern instrumentation capabilities, highlighting the need for strategic automation while preserving essential human insight and oversight in the research process.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Direct observation on supersonic microprojectile penetration of carbon fiber composites with ultrafast synchrotron X-ray phase contrast imaging

High-speed penetration into carbon fiber composites is of fundamental importance to materials science and impact engineering, but research along this line suffers considerably from the lack of direct experimental observations. Here we investigate such penetration dynamics of a unidirectional carbon fiber reinforced epoxy (UCFRE) composite, with a combination of in situ, ultrafast, synchrotron phase contrast imaging and finite element (FE) analysis. The experiments yield the first direct observation on projectile trajectories and fiber-scale deformation and damage in the UCFRE composites during supersonic microprojectile penetration, for different fiber orientations (0 degrees - 90 degrees from the impact direction) and projectile velocities (600 - 850 m.s -1 ), at unprecedented temporal (~ 100 ps) and spatial (5 μm) resolutions. The maximum penetration depth decreases with increasing fiber orientation angles, as a result of anisotropic damage evolution in the composite sample. Strain localizations are prone to develop along a direction perpendicular to the fiber orientation, while the damage or cavity region, along the fiber direction. FE modeling with a three-dimensional Hashin criterion yields consistent projectile trajectory and cavity morphology with the experimental results. Finally, with increasing fiber orientation angles, damage analyses show a transition in the damage mode from fiber compression to matrix compression damage, in line with the increasing maximum penetration depth.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Assessing an aqueous flow cell designed for in situ crystal growth under X-ray nanotomography and effects of radiolysis products

Nucleation and growth of minerals has broad implications in the geological, environmental and materials sciences. Recent developments in fast X-ray nanotomography have enabled imaging of crystal growth in solutions in situ with a resolution of tens of nanometres, far surpassing optical microscopy. Here, a low-cost, custom-designed aqueous flow cell dedicated to the study of heterogeneous nucleation and growth of minerals in aqueous environments is shown. To gauge the effects of radiation damage from the imaging process on growth reactions, radiation-induced morphological changes of barite crystals (hundreds of nanometres to ∼1 µm) that were pre-deposited on the wall of the flow cell were investigated. Under flowing solution, minor to major crystal dissolution was observed when the tomography scan frequency was increased from every 30 min to every 5 min (with a 1 min scan duration). The production of reactive radicals from X-ray induced water radiolysis and decrease of pH close to the surface of barite are likely responsible for the observed dissolution. The flow cell shown here can possibly be adopted to study a wide range of other chemical reactions in solutions beyond crystal nucleation and growth where the combination of fast flow and fast scan can be used to mitigate the radiation effects.

36 MATERIALS SCIENCE↗
DOE OSTI2024

DECA: Discrete Event inspired Cellular Automata for grain structure prediction in additive manufacturing

Microstructure largely dictates macroscopic material properties and is strongly affected by processing. Therefore, the simulation of microstructure evolution in response to thermal fields during processing is of significant interest within the computational materials science community. Additive manufacturing (AM) has emerged as a technique for producing complex geometries and unique microstructures. Yet, complex and rapid thermal cycles in AM pose computational challenges for existing microstructure models. This work proposes a discrete event inspired cellular automata (CA) approach, titled DECA, to accelerate simulation of grain structure evolution in AM. In contrast to conventional time-stepped CA models, this model directly solves the times capture events would take place allowing for stepping in events rather than time (a technique also found in the field of discrete-event simulation). In comparison to purely serial discrete-event models, DECA allows for temporary violation of the causality constraint, but detects and corrects these violations, leading to an emergent phenomenon dubbed causality rippling, in which previously calculated capture events are overwritten. The amount of repeated calculations, defined by the capture ratio, is taken as a measure of computational inefficiency, and the model parameters that affect this ratio are evaluated. The new DECA approach was found to be more computationally efficient than conventional time-stepped CA models while guaranteeing an accurate solution, which can only be achieved in the conventional models for vanishingly small time steps. Finally, opportunities for parallelization and scaling of the new approach are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Spin-orbit quantum impurity in a topological magnet

Quantum states induced by single-atomic impurities are at the frontier of physics and material science. While such states have been reported in high-temperature superconductors and dilute magnetic semiconductors, they are unexplored in topological magnets which can feature spin-orbit tunability. Here we use spin-polarized scanning tunneling microscopy/spectroscopy (STM/S) to study the engineered quantum impurity in a topological magnet Co 3 Sn 2 S 2 . We find that each substituted In impurity introduces a striking localized bound state. Our systematic magnetization-polarized probe reveals that this bound state is spin-down polarized, in lock with a negative orbital magnetization. Moreover, the magnetic bound states of neighboring impurities interact to form quantized orbitals, exhibiting an intriguing spin-orbit splitting, analogous to the splitting of the topological fermion line. Our work collectively demonstrates the strong spin-orbit effect of the single-atomic impurity at the quantum level, suggesting that a nonmagnetic impurity can introduce spin-orbit coupled magnetic resonance in topological magnets.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Strain wave pathway to semiconductor-to-metal transition revealed by time-resolved X-ray powder diffraction

One of the main challenges in ultrafast material science is to trigger phase transitions with short pulses of light. Here we show how strain waves, launched by electronic and structural precursor phenomena, determine a coherent macroscopic transformation pathway for the semiconducting-to-metal transition in bistable Ti 3 O 5 nanocrystals. Employing femtosecond powder X-ray diffraction, we measure the lattice deformation in the phase transition as a function of time. We monitor the early intra-cell distortion around the light absorbing metal dimer and the long range deformations governed by acoustic waves propagating from the laser-exposed Ti 3 O 5 surface. We developed a simplified elastic model demonstrating that picosecond switching in nanocrystals happens concomitantly with the propagating acoustic wavefront, several decades faster than thermal processes governed by heat diffusion.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Unravelling crystal growth of nanoparticles

Crystal growth from nanoscale constituents is a ubiquitous phenomenon in biology, geology and materials science. Numerous studies have focused on understanding the onset of nucleation and on producing high-quality crystals by empirically sampling constituents with different attributes and varying the growth conditions. However, the kinetics of post-nucleation growth processes, an important determinant of crystal morphology and properties, have remained underexplored due to experimental challenges associated with real-space imaging at the nanoscale. Here we report the imaging of the crystal growth of nanoparticles of different shapes using liquid-phase transmission electron microscopy, resolving both lateral and perpendicular growth of crystal layers by tracking individual nanoparticles. We observe that these nanoscale systems exhibit layer-by-layer growth, typical of atomic crystallization, as well as rough growth prevalent in colloidal systems. Surprisingly, the lateral and perpendicular growth modes can be independently controlled, resulting in two mixed crystallization modes that, until now, have received only scant attention. Combining analytical considerations with molecular dynamics and kinetic Monte Carlo simulations, we develop a comprehensive framework for our observations, which are fundamentally determined by the size and shape of the building blocks. Furthermore, these insights unify the understanding of crystal growth across four orders of magnitude in particle size and suggest novel pathways to crystal engineering.

Imaging techniques↗
DOE OSTI2025

Accelerating the discovery of low-energy structure configurations: A computational approach that integrates first-principles calculations, Monte Carlo sampling, and Machine Learning

Finding Minimum Energy Configurations (MECs) is essential in fields such as physics, chemistry, and materials science, as they represent the most stable states of the systems. In particular, identifying such MECs in multi-component alloys considered candidate PFMs is key because it determines the most stable arrangement of atoms within the alloy, directly influencing its phase stability, structural integrity, and thermo-mechanical properties. However, since the search space grows exponentially with the number of atoms considered, obtaining such MECs using computationally expensive first-principles DFT calculations often results in a cumbersome task. To escape the above compromise between physical fidelity and computational efficiency, we have developed a novel physics-based data-driven approach that combines Monte Carlo sampling, first-principles DFT calculations, and Machine Learning to accelerate the discovery of MECs in multi-component alloys. More specifically, we have leveraged well-established Cluster Expansion (CE) techniques with Local Outlier Factor models to establish strategies that enhance the reliability of the CE method. In this work, we demonstrated the capabilities of the proposed approach for the particular case of a tungsten-based quaternary high-entropy alloy. However, the method is applicable to other types of alloys and enables a wide range of applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Understanding the Formation of Complex Phases: The Case of FeSi 2

One of the fundamental goals of materials science is to understand and predict the formation of complex phases. In this study, FeSi 2 is considered as an illustration of complex phase formation. Although Fe and Si both crystallize with a simple structure, namely, body-centered cubic (bcc A2) and diamond (A4) structures, respectively, it is rather intriguing to note the existence of two complex structures in the Si-rich part of the phase diagram around FeSi 2 : α-FeSi 2 at high temperatures (HT) with a slight iron-deficient structure and β-FeSi2 (also referred to as Fe 3 Si 7 ) at low temperatures (LT). We re-analyze the geometry of these two phases and rely on approximant phases that make the relationship between these two phases simple. To complete the analysis, we also introduce a surrogate of the C16 phase that is observed in FeGe 2 . We clearly identify the relationship that exists between these three approximant phases, corroborated by a ground-state analysis of the Ising model for describing ordering that takes place between the transition metal element and the “vacancies”. This work is further supported by ab initio electronic structure calculations based on density functional theory in order to investigate properties and transformation paths. Finally, extension to other alloys, including an entire class of alloys, is discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Unsupervised atomic data mining via multi-kernel graph autoencoders for machine learning force fields

Constructing a chemically diverse dataset while avoiding sampling bias is critical to training efficient and generalizable force fields. However, in computational chemistry and materials science, many common dataset generation techniques are prone to oversampling regions of the potential energy surface. Furthermore, these regions can be difficult to identify and isolate from each other or may not align well with human intuition, making it challenging to systematically remove bias in the dataset. While traditional clustering and pruning (down-sampling) approaches can be useful for this, they can often lead to information loss or a failure to properly identify distinct regions of the potential energy surface due to difficulties associated with the high dimensionality of atomic descriptors. In this work, we introduce the Multi-kernel Edge Attention-based Graph Autoencoder (MEAGraph) model, an unsupervised approach for analyzing atomic datasets. MEAGraph combines multiple linear kernel transformations with attention-based message passing to capture geometric sensitivity and enable effective dataset pruning without relying on labels or extensive training. Demonstrated applications on niobium, tantalum, and iron datasets show that MEAGraph efficiently groups similar atomic environments, allowing for the use of basic pruning techniques for removing sampling bias. This approach provides an effective method for representation learning and clustering that can be used for data analysis, outlier detection, and dataset optimization.

Materials science↗