Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “magma”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Magnesian anorthosites and associated troctolites and dunite in Apollo 14 breccias

Magnesian anorthosite, a new type of pristine lunar highlands rock, has been found in Apollo 14 breccias. It has primitive (high Ca and Mg) silicate mineral compositions, and high and variable REE concentrations. Variations in REE contents can be accounted for by variations in modal abundance of REE-rich apatite. Magnesian anorthosites are associated with troctolites and a dunite with very similar mineral compositions and it is suggested that all crystallized from a differentiated troctolitic intrusion. The origin of the REE-rich apatite is enigmatic. It is unlikely to have crystallized from an igneous liquid in equilibrium with the major minerals in the anorthosite. Possible origins are assimilation of urKREEP or metasomatism by REE-rich fluids. REE-rich alkali anorthosites and gabbronorites are also found and are likely to be related to KREEP basalt magmas. Lunar compositional associations are distributed in a regional rather than global manner.

Lindstrom, M. M.↗
NASA NTRS1985

The depths of the mare basalt source region

Chemical data for the parental magmas of the nine known VLT Array I pyroclastic glasses show statistically significant trends due to olivine (approximately Fo83) control during their formation by partial melting. The compositional scatter is largely due to compositional variations in the source regions on the + or - 1 percent level. This compositional scatter is small when one considers that the scale of the source region is up to 1000 km, but is sufficient to make positive identification of the residual phase(s) in the source regions difficult. Nevertheless, when the effects of the scatter are properly modeled, it is relatively clear that olivine is the residual phase in the source region. Hence these data and additional constraints indicate that the source regions are at shallow depths in the moon.

Binder, A. B.↗
NASA NTRS1985

Sulfide and sulfate saturation in hydrous silicate melts

A series of hydrothermal experiments was performed over a wide range of pressures, temperatures, oxygen fugacities, and melt FeO content, in order to examine the effects of physical changes on sulfur solubility in fractionated hydrous silicate melts. On the basis of the experimental results, it is concluded that upper crustal oxidation-reduction reactions and crystal fractionation processes may exert considerable influence on the amount of sulfur contained in magmas erupted at the surface. The application of the experimental results to investigations of volatile transport and volcanic degassing processes on the earth, Venus, and Mars is discussed

Carroll, M. R.↗
NASA NTRS1985

High stress shallow moonquakes - Evidence for an initially totally molten moon

Thermoelastic stress calculations show that if the moon was initially molten only in the outer few hundred kilometers, as in the magma ocean model of the moon, the highlands crust should be aseismic. In contrast, if the moon was initially totally molten, high stress (1 to more than about 3 kbar), shallow (0 to about 6 km deep), compressional moonquakes should be occurring in the highlands crust. Calculations of the minimum stress drops made for the 28 observed shallow moonquakes suggest that 3 of them probably have stress drops in the kbar range. Thus, these very limited seismic data are consistent with the model that the moon was initially totally molten.

Binder, A. B.↗
NASA NTRS1983

Mineralogical comparison of antarctic and non-antarctic HED (howardites-eucrites-diogenites) achondrites

Mineralogical examination of thin sections of non-Antarctic and Antarctic HED (howardite, eucrite, diogenite) achondrites indicates that they contain a variety of lithic components. Some of these components occur both as monomict meteorites and as clasts in polymict meteorites, whereas others occur only as clasts in some polymict breccias. The components may be classified by the degree of homogenization of the pyroxene present. In order of increasing homogeneity these are: (1) Y-75011-type basalt clasts; (2) Pasamonte; (3) Y-790266-type clasts; (4) Stannern and Nuevo Laredo; (5) Juvinas and Haraiya; and (6) Ibitira. Type 1 has been least modified by post-igneous thermal annealing, while types 5 and 6 were thoroughly metamorphosed. Three types of cumulate eucrites are recognized and are believed to represent (a) cumulates from thick lava flows or layered intrusions; (b) lunar highlands type crust; and (c) differentiation products of diogenitic magmas.

Takeda, H.↗
NASA NTRS1986

A study of tectonic activity in the Basin-Range Province and on the San Andreas Fault. No. 1: Kinematics of Basin-Range intraplate extension

Strain rates assessed from brittle fracture and total brittle-ductile deformation measured from geodetic data were compared to estimates of paleo-strain from Quaternary geology for the intraplate Great Basin part of the Basin-Range, western United States. These data provide an assessment of the kinematics and mode of lithospheric extension that the western U.S. Cordillera has experienced from the past few million years to the present. Strain and deformation rates were determined by the seismic moment tensor method using historic seismicity and fault plane solutions for sub-regions of homogeneous strain. Contemporary deformation in the Great Basin occurs principally along the active seismic zones. The integrated opening rate across the entire Great Basin is accommodated by E-E extension at 8 to 10 mm/a in the north that diminishes to NW-SE extension of 3.5 mm/a in the south. Zones of maximum lithospheric extension correspond to belts of thin crust, high heat flow, and Quaternary basaltic volcanism, suggesting that these parameters are related through mechanism of extension such as a stress relaxation, allowing bouyant uplift and ascension of magmas.

Eddington, P. K.↗
NASA NTRS1986

A study of tectonic activity in the Basin-Range Province and on the San Andreas Fault. No. 3: Kinematics of Great Basin intraplate extension from earthquake, geodetic and geologic information

Strain rates assessed from brittle fracture, associated with earthquakes, and total brittle-ductile deformation measured from geodetic data were compared to paleostrain from Quaternary geology for the intraplate Great Basin of the western United States. These data provide an assessment of the kinematics and mode of lithospheric extension that the western U.S. Cordillera has experienced in the last 5 to 10 million years. Strain and deformation rates were determined by the seismic moment tensor method using historic seismicity and fault plane solutions. Contemporary deformation of the Great Basin occurs principally along the active seismic zones. The earthquake related strain shows that the Great Basin is characterized by regional E-W extension at 8.4 mm/a in the north that diminishes to NW-SE extension of 3.5 mm/a in the south. Zones of maximum extension correspond to belts of shallow crust, high heat flow, and Quaternary basaltic volcanism, suggesting that these parameters are related through an effect such as a stress relaxation allowing bouyant uplift and ascension of magmas.

Eddington, P. K.↗
NASA NTRS1986

Geochemical and isotopic constraints on the tectonic setting of Serra dos Carajas belt, eastern Para, Brazil

The lower part of the Serra dos Carajas belt is the metavolcanic and metasedimentary Grao para Group (GPG). The GPG is thought to unconformably overlie the older (but undated) Xingu Complex, composed of medium and high-grade gneisses and amphibolite and greenstone belts. The geochemical data indicate that the GPG has many features in common with ancient and modern volcanic suites erupted through continental crust. The mafic rocks clearly differ from those of most Archean greenstone belts, and modern MORB, IAB, and hot-spot basalts. The geological, geochemical, and isotopic data are all consistent with deposition on continental crust, presumably in a marine basin formed by crustal extension. The isotopic data also suggest the existence of depleted mantle as a source for the parent magmas of the GPG. The overall results suggest a tectonic environment, igneous sources, and petrogenesis similar to many modern continental extensional basins, in contrast to most Archean greenstone belts. The Hammersley basin in Australia and the circum-Superior belts in Canada may be suitable Archean and Proterozoic analogues, respectively.

Olszewski, W. J., Jr.↗
NASA NTRS1986

Age and origin of gneisses south of Ameralik, between Kangimut-Sangmissoq and Qasigianguit

Gneisses which crop out along the southern coast of Ameralik between Kangimut-sangmissoq and Qasigianguit (K-s-Q) are the subject of long-standing controversy concerning their relationship to the early Archean Amitsoq gneisses of the Godthaab district. On the basis of field observations, it was argued that gneisses at Kangimut-sangmissoq and Qasigianguit are correlatives of the early Archean Amitsoq gneisses. The data were reexamined and it is concluded that the K-s-Q gneisses represent an addition of substantially juvenile mantle-derived material to the Archean craton of West Greenland during the late Archean times. Some of the parent magmas have undergone interaction with older crust, as indicated by Pb isotope evidence for contamination with Amitsoq-derived Pb. However, the positive epsilon Nd(I) value for the K-s-Q gneisses firmly rules out any significant material contribution from the Amitsoq gneisses to the K-s-Q gneisses.

Jones, N. W.↗
NASA NTRS1985

Heat flow increase following the rise of mantle isotherms and crustal thinning

Heat flow measurements in the western United States define a zone of high heat flow which coincides with the Basin and Range Province where extension has taken place recently. In this region, the average reduced heat flow is approx 30 mW sq. meters higher than in stable continental provinces; locally (e.g., Battle Mountain High), the heat flow anomaly can be more than 100 mW/sq meters above average. Estimates of the amount of extension range between 30% and 100% for the past 30 Ma. In the Colorado Plateau, which has been uplifted without major tectonic deformation, the heat flow is only slightly above average. Analytical calculations show that an abrupt change in heat flow at the base of the lithosphere 30 Ma ago would not affect the surface significantly. Uplift would proceed at a slow rate. A thermal perturbation at the base of a 40 km thick crust, however, would reach the surface faster and, after 30 Ma, the increase in surface heat flow would be about 75% of the amplitude of the heat flow anomaly. The number of volcanic rocks in the Basin and Range suggests that magma intrusions may provide an effective heat transfer mechanism. It can be show that if the source of the intrusions is at the base of the lithosphere, the response time will be much longer than 30 Ma, and most ot the heat transferred from the asthenosphere will be absorbed in the lithosphere.

Mareschal, J. C.↗
NASA NTRS1985

Heat and extension at mid- and lower crustal levels of the Rio Grande rift

The process by which large amounts (50 to 200 percent) of crustal extension are produced was concisely described by W. Hamilton in 1982 and 1983. More recently, England, Sawyer, P. Morgan and others have moved toward quantifying models of lithospheric thinning by incorporating laboratory and theoretical data on rock rheology as a function of composition, temperature, and strain rate. Hamilton's description identifies three main crustal layers, each with a distinctive mechanical behavior; brittle fracturing and rotation in the upper crust, discontinuous ductile flow in the middle crust and laminar ductile flow in the lower crust. The temperature and composition dependent brittle-ductile transition essentially defines the diffuse boundary between upper and middle crust. It was concluded that the heat responsible for the highly ductile nature of the lower crust and the lensoidal and magma body structures at mid-crustal depths in the rift was infused into the crust by relatively modest ( 10 percent by mass) magmatic upwelling (feeder dikes) from Moho levels. Seismic velocity-versus-depth data, supported by gravity modeling and the fact that volumes of rift related volcanics are relatively modest ( 6000 cubic km) for the Rio Grande system, all imply velocities and densities too small to be consistent with a massive, composite, mafic intrusion in the lower crust.

Olsen, K. H.↗
NASA NTRS1985

Radial rift and block tectonics around the Tharsis bulge: Introductional postulation

Although the Vallis Marineris canyon and radial fossae grabens have been extensively studied, their origin and formation mechanism is still the subject of numerous questions. Possible rift formation is only one point of view and does not explain the rifting mechanism and the radial pattern of these structures around the Tharsis bulge. Both active and passive rifting must be taken into account. According to the active mechanism the building of a colcanic complex like the Tharsis bulge is caused by the rising of a huge mantle plume and adjoining extrusions which tap the generated magma. The surrounding fossae and valley structures are caused by more passive crustal rifting due to tensional failure of the surface layers. The main rising mantle plume activated and regenerated failure patterns radial to the centre of activity. These radial zones of weakness are then most easily utilized by the rising mantle plume. Deep zones of weakness regulate the penetration and distribution of hot mantle rock into upper levels while, contrarily, the effective impingement of the hot mantle plume into the lithosphere opens up new weakness zones.

Raitala, J.↗
NASA NTRS1985

Halite particles injected into the stratosphere by the 1982 El Chichon eruption

A cascade impactor was flown on board a U-2 aircraft to gather particulate samples in the stratosphere at 18-21 km altitude after the El Chichon eruptions of 1982. Halite particles were observed, which posed a hazard for the catalytic destruction of ozone. No halite particles were observed a month after the eruptions, while a 40 percent increase in HCl was detected at 12 km, an increase which could have been augmented by halite transformations. The halite proportion of the volcanic clouds was of the same proportion of NaCl as in the volcanic ash around El Chichon. The results indicate that halite forms in eruption clouds of volcanos with alkalic magmas.

Woods, D. C.↗
NASA NTRS1985

SNC meteorites - Clues to Martian petrologic evolution?

Shergottites, nakhlites and the Chassigny meteorites (SNC group) may have originated on Mars. The shergottites are medium-grained basalts, the nakhlites are pyroxenites and the Chassigny is a dunite. The SNC group is petrologically diverse but differs from all other known achondrites in terms of mineral chemistry, the redox state, the oxygen isotopic composition and the radiometric ages. The SNC stones are mafic and ultramafic cumulate rocks with mineralogies that indicate rapid cooling and crystallization from tholeiitic magmas which contained water and experienced a high degree of oxidation. The characteristics suggest formation from a large parent body, i.e., a planet, but not earth. The estimated ages for the rocks match the estimated ages for several mapped Martian volcanoes in the Tharsis region. Additionally, the elemental and isotopic abundances of atmospheric gases embedded in melts in the SNC stones match Viking Lander data for the Martian atmosphere. However, reasons are cited for discounting the possibility that a large meteorite(s) collided with Mars about 180 myr ago and served as the mechanism for ejecting the SNC stones to earth.

Mcsween, H. Y., Jr.↗
NASA NTRS1985

Tidally forced viscous heating in a partially molten Io

Models of Io that generate most of their heat by viscous dissipation in a partially molten (perhaps nearly liquid) asthenosphere are developed: a partially molten asthenosphere model and a partially molten interior model. An approximate thermal analysis is carried out, suggesting the possibility of a stable steady state. The models are consistent with observations of widely dispersed hot spots on the Io surface that radiate most of Io's heat loss. The hot spots imply that magmas carry most of the dissipative heating that is naturally accounted for in the models.

Ross, M. N.↗
NASA NTRS1986

Silicate volcanism on Io

This paper is mainly concerned with the nature of volcanic eruptions on Io, taking into account questions regarding the presence of silicates or sulfur as principal component. Attention is given to the generation of silicate magma, the viscous dissipation in the melt zone, thermal anomalies at eruption sites, and Ionian volcanism. According to the information available about Io, it appears that its volcanism and hence its surface materials are dominantly silicic. Several percent of volatile materials such as sulfur, but also including sodium- and potassium-rich materials, may also be present. The volatile materials at the surface are continually vaporized and melted as a result of the high rates of silicate volcanism.

Carr, M. H.↗
NASA NTRS1986

Geochronology and petrogenesis of Apollo 14 very high potassium mare basalts

Rb-Sr, K-Ar, and Sm-Nd isotopic studies were undertaken for two Apollo 14 very high potassium (VHK) highly radiogenic mare basaltic clasts from breccias 14305 and 14168. Rb-Sr data indicate ages of 3.83 + or - 0.08 b.y., and 3.82 + or - 0.12 b.y. for samples 14305 and 14168 respectively, for lambda(Rb-87) = 0.0 139/b.y. Their corresponding initial Sr-87/Sr-86 ratios are nearly identical, as well as their Ar-39 to Ar-40 age spectra, and it is proposed that they were derived from the same flow. The Sm-Nd isotopic data of whole rock and mineral separates for the two VHK basalts define an internal isochrone age of 3.94 + or - 0.16 b.y. for lambda (Sm-147) = 0.00654/b.y. and an initial Nd-143/Nd-144 of 0.50673 + or - 21. The similarity in isotopic ages suggests that VHK basalts crystallized from a melt about 3.85 b.y. ago. VHK basalts show very large Rb/Sr fractionation but no significant Sm/Nd fractionation at the time of crystallization. The source material had a Rb/Sr ratio similar to those of Apollo 14 high-Al mare basalts and a nearly chrondritic Sm/Nd ratio. Basalt/granite interaction was found to be responsible for the extreme enrichments of Rb/Sr and K/La during the formation of VHK basalts. It is concluded that K, Rb-rich components of granitic wall rocks in the highland crust were selectively introduced into ascending hot high-Al mare basaltic magma upon contact.

Shih, C.-Y.↗
NASA NTRS1986

Hf, Zr, and REE partition coefficients between ilmenite and liquid - Implications for lunar petrogenesis

Partition coefficients (D) between ilmenite and coexisting liquid were determined under near-lunar conditions for Hf, Zr, and REE. Through isotope dilution analysis, ilmenite D values of 0.41 and 0.33 were obtained for Hf and Zr respectively, values significantly lower than those of ilmenite from a kimberlite megacryst. Partition coefficients of REE for the synthesized ilmenite are slightly smaller than those of ilmenite from the kimberlite megacryst, and the lunar (Lu) partition coefficient is 0.056. These results suggest that ilmenite was significant in the lunar-Hf evolution of lunar mare basalts. Using lunar and Hf D values for ilmenite, the Lu-Hf evolution of lunar cumulates and the coexisting magma was examined for various crystallization sequences. The Lu-Hf variation trend of most high-Ti mare basalts is explained by a small degree of partial cumulate melting, though a higher degree is required to explain the variation of very low-Ti basalts, green glass, and Apollo 12 low-Ti basalts. Apollo 15 low-Ti basalts may require chromite crystallization as well.

Nakamura, Y.↗