Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ionic conductivities”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Large-Area Lithium Electrode Sub-Assemblies (LESAs) Protected by Self Forming Microstructured Polymer-Inorganic Single-Ion Conducting Composites (Final Report)

The aim of this project is to realize a low-cost, safe, reversible, high-areal capacity lithium metal electrode though the use of scalable, low-cost Lithium Electrode Sub-Assembly (LESA). At its core, the LESA applies novel polymer scaffolds to nanostructure inorganic ionic materials into high-conductivity composites that stabilize lithium anodes during high-rate, high-capacity cycling in lithium metal batteries. Fundamental investigations from this project identified a newly defined region of stability for composites with respect to the shear modulus and lithium molar volume ratio which have been broadly applied in the scientific literature for a multitude of different systems. The advancements achieved in this field have furthered the fundamental understanding of lithium metal electrode chemistry and degradation mechanisms and resulted in a lithium metal anode with improved cycle life.

25 ENERGY STORAGE↗
DOE OSTI2020

Quantifying Single-Ion Transport in Percolated Ionic Aggregates of Polymer Melts

Single-ion conducting polymers such as ionomers are promising battery electrolyte materials, but it is critical to understand how rates and mechanisms of free cation transport depend on the nanoscale aggregation of cations and polymer-bound anions. We perform coarse-grained molecular dynamics simulations of ionomer melts to understand cation mobility as a function of polymer architecture, background relative permittivity, and corresponding ionic aggregate morphology. In systems exhibiting percolated ionic aggregates, cations diffuse via stepping motions along the ionic aggregates. These diffusivities can be quantitatively predicted by calculating the lifetimes of continuous association between oppositely charged ions, which equal the time scales of the stepping (diffusive) motions. In contrast, predicting cation diffusivity for systems with isolated ionic aggregates requires another time scale. Finally, our results suggest that to improve conductivity the Coulombic interaction strength should be strong enough to favor percolated aggregates but weak enough to facilitate ion dissociation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

High‐Efficiency Ion‐Exchange Doping of Conducting Polymers

Abstract Molecular doping—the use of redox‐active small molecules as dopants for organic semiconductors—has seen a surge in research interest driven by emerging applications in sensing, bioelectronics, and thermoelectrics. However, molecular doping carries with it several intrinsic problems stemming directly from the redox‐active character of these materials. A recent breakthrough was a doping technique based on ion‐exchange, which separates the redox and charge compensation steps of the doping process. Here, the equilibrium and kinetics of ion exchange doping in a model system, poly(2,5‐bis(3‐alkylthiophen‐2‐yl)thieno(3,2‐b)thiophene) (PBTTT) doped with FeCl 3 and an ionic liquid, is studied, reaching conductivities in excess of 1000 S cm −1 and ion exchange efficiencies above 99%. Several factors that enable such high performance, including the choice of acetonitrile as the doping solvent, which largely eliminates electrolyte association effects and dramatically increases the doping strength of FeCl 3 , are demonstrated. In this high ion exchange efficiency regime, a simple connection between electrochemical doping and ion exchange is illustrated, and it is shown that the performance and stability of highly doped PBTTT is ultimately limited by intrinsically poor stability at high redox potential.

36 MATERIALS SCIENCE↗
DOE OSTI2023

A Study on the Synthesis and Proton Transport Behavior of Multilayered ZSM-5 Zeolite Nanosheet Membranes Laminated on Polymer Substrates

Single crystalline ZSM-5 ZNs with thicknesses around 6 nm were obtained by secondary growth of silicalite nanoparticles using diquaternary bis-1,5(tripropyl ammonium) pentamethylene diiodide (dC5) as a structure-directing agent (SDA). The dC5 could be effectively removed from the ZN pores by either high-temperature calcination or UV irradiation in air at room temperature but not by the piranha solution treatment. Ultrathin ZN-laminated membranes (ZNLMs) were fabricated by sandwiching a UV-activated multilayered ZN film between two recast Nafion® layers (ZNLM-Nafion) and by filtration coating from a suspension of thermally activated ZNs on a nonionic porous PVDF (ZNLM-PVDF). The ZNLMs on both supports demonstrated the ability of highly proton-selective ion conduction with low resistances in aqueous electrolyte solutions. The ZNLM-PVDF with PVDF binder was structurally stable, and it achieved a comparably low ASR but much higher proton selectivity compared with a Nafion membrane of same overall thickness. However, detachment between the ZNLM and Nafion layers occurred when the ZNLM-Nafion operated in aqueous electrolyte solutions. Results of this study show the potential for developing ZNLMs as efficient proton-conducting membranes without using expensive ionic polymer matrices. However, the development of polymer-supported ZNLMs is hindered by the current inefficiency in preparing well-dispersed suspensions of open-pore ZNs. Future development of efficient methods for synthesizing open-pore ZNs in dispersed states is key to realizing high-performance ZNLMs on polymers.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Implications of phonon anisotropy on thermal conductivity of fluorite oxides

Abstract Fluorite oxides are attractive ionic compounds for a range of applications with critical thermal management requirements. In view of recent reports alluding to anisotropic thermal conductivity in this face-centered cubic crystalline systems, we perform a detailed analysis of the impact of direction-dependent phonon group velocities and lifetimes on the thermal transport of fluorite oxides. We demonstrate that the bulk thermal conductivity of this class of materials remains isotropic despite notable anisotropy in phonon lifetime and group velocity. However, breaking the symmetry of the phonon lifetime under external stimuli including boundary scattering present in nonequilibrium molecular dynamics simulations of finite size simulation cell gives rise to apparent thermal conductivity anisotropy. We observe that for accurate determination of thermal conductivity, it is important to consider phonon properties not only along high symmetry directions commonly measured in inelastic neutron or x-ray scattering experiments but also of those along lower symmetry. Our results suggests that certain low symmetry directions have a larger contribution to thermal conductivity compared to high symmetry ones.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Role of Wadsley Defects and Cation Disorder to Enhance MoNb 12 O 33 Diffusion

Wadsley-Roth (WR) niobates have emerged as high-rate anode materials that can combine rapid ionic diffusion with good electronic conductivity. WR compounds have been defect-enhanced by limited annealing, however, such materials often contain multiple types of defects. In particular, both Wadsley defects (variable block size) and transition metal disorder have the potential to modify transport rates, however the corresponding effects are not well understood mechanistically. Here, MoNb 12 O 33 (MNO) was calcined at two different temperatures to compare a defect-rich condition (MNO-800) with a proximal order-rich condition (MNO-900) as assessed through XRD, XANES, EXAFS, and STEM characterizations. Galvanostatically cycled lithium half cells of MNO-800 exhibited additional capacity (307 mAhg −1 at 0.1C, 4.66% higher) and improved high-rate capacity of 200 mAhg −1 at 10C. ICI-based overpotential analysis identified solid state diffusion as the dominant rate limiting process where MNO-800 correspondingly exhibited ∼3X faster capacity-weighted diffusivity. A machine-learning interatomic potential was trained to density functional theory and then applied with molecular dynamics (MLIP-MD) to examine the possible roles of Wadsley defects and transition metal disorder. For both defect-types, Li was found to populate and activate fast diffusion paths from window sites at lower extents of lithiation as compared to the order-rich model.

defect↗
DOE OSTI2022

Selective Ion Enrichment and Charge Storage through Transport Hysteresis in Conical Nanopipettes

Greater selectivity and controls in the ion transport dynamics are essential in fields such as charge storage, separation, energy storage and conversion, neuromorphic computing and learning, electrochemistry, to name a few. Mechanistic insights into the intriguing hysteresis effects in the rectified electrokinetic transport through single conical nanopipettes are unveiled by combining time-resolved electroanalytical experiments with numeric simulation. Cations as counterions for surface charges are found to dominate not just the through-nanopore flux but also the hysteresis charges, that is, the net enriched or expelled charges during the transport process. Built on our earlier report on the through-nanopore ion flux dominated by counterions for surface charges, the “trapped ions” or hysteresis charges are analyzed herein. Cation selectivity is almost 100% in the hysteresis charges during the potential scans in low conductivity states driven by the combined applied and intrinsic surface electrical fields. Surprisingly, the cation selectivity in the total hysteresis charges remains high at 70–80% over a wide bulk concentration range in the high conductivity (HC) states, where higher ionic strength due to ion enrichment would decrease electrostatistic effects and thus ion selectivity. The retained high selectivity at HC is explained by the competition effects of electroosmotic flow against the co-ion migration. Furthermore, the respective cation and anion portions in the total hysteresis charges over a wide range of ionic strength and measurement conditions provide generalizable strategies for improvements in both transport throughput and selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Thermodynamic Origin of Reaction Non-Uniformity in Battery Porous Electrodes and Its Mitigation

The development of non-uniform reaction current distribution within porous electrodes is a ubiquitous phenomenon during battery charging/discharging and frequently controls the rate performance of battery cells. Reaction inhomogeneity in porous electrodes is usually attributed to the kinetic limitation of mass transport within the electrolyte and/or solid electrode phase. In this work, however, we reveal that it is also strongly influenced by the intrinsic thermodynamic behavior of electrode materials, specifically the dependence of the equilibrium potential on the state of charge: the electrode reaction becomes increasingly non-uniform when the slope of the equilibrium potential curve is reduced. We employ numerical simulations and equivalent circuit model to elucidate such a correlation and show that the degree of reaction inhomogeneity and the resultant discharge capacity can be predicted by a dimensionless reaction uniformity number. For electrode materials that have equilibrium potentials insensitive to the state of charge and exhibit significant reaction non-uniformity, we demonstrate several approaches to spatially homogenizing the reaction current inside porous electrodes, including matching the electronic and ionic resistances, introducing graded electronic conductivity and reducing the surface reaction kinetics.

25 ENERGY STORAGE↗
DOE OSTI2022

On the mechanism of performance improvement of electroactive polyvinyl chloride (PVC) gel actuators via conductive fillers

Abstract The electromechanical actuation of transparent plasticized polyvinyl chloride (PVC) gels with conductive fillers were studied. The effects of functionalized carbon nanotubes (CNTs) and 1-butyl-3-methylimidazolium tetrafluoroborate ([Bmim]BF 4 ) ionic liquid (IL) on both the electrical conduction and dielectric processes within PVC gels were investigated, and the differences between the two were clarified. Both CNTs and IL were shown to increase the conductivity of the gels and produce larger electromechanical transduction of a contraction actuator, but only CNTs were shown to increase the electrostatic adhesion force of the PVC gels. The addition of charge carriers to the gel via the inclusion of ILs was shown to significantly reduce the conductivity relaxation time, and the transient current upon voltage polarity reversal indicated multiple peaks corresponding to the introduction of carriers with different polarities and mobilities into the gel. This is believed to cause a screening effect, reducing the charge accumulation at the anode that is the foundational basis for PVC gels’ actuation mechanism. A recommendation for preferable conductive fillers for various applications is made.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Electrospun Nanofiber Electrodes for High and Low Humidity PEMFC Operation

MEAs with nanofiber mat electrodes containing Pt/C catalyst and Nafion binder were fabricated and evaluated. The electrodes were prepared by electrospinning a solution of catalyst powder, salt-form Nafion (with Na + , Li + , or Cs + as the sulfonic acid counterion), and a carrier polymer of either polyethylene oxide or poly(acrylic acid). The carrier polymer was extracted prior to MEA testing by a hot water soaking step. The resulting fibers were 15%–17% porous, with a core–shell-like morphology (a coating of primarily Nafion on the fiber surface). MEAs with anode/cathode catalyst loadings of 0.1 mg Pt cm −2 each and a Nafion 211 membrane produced high power at both high and low relative humidity (RH) conditions in H 2 /air fuel cell tests, e.g., a maximum power density of 919 mW cm −2 at 100% RH and 832 mW cm −2 at 40% RH for a test at 80 °C and 200 kPa abs . The presence of nm-size pores within the fibers trapped water via capillary condensation during low RH feed gas testing, thus maintaining a high proton conductivity of the Nafion binder in the anode and cathode while minimizing/eliminating ionic isolation of catalyst particles in low water content, poorly conductive binder.

25 ENERGY STORAGE↗
DOE OSTI2026

Effects of Dimethylamino Functional Group Substitution on the Physical, Structural and Radiolytic Properties of Pyridinium Ionic Liquids

A diverse range of 4-dimethylaminopyridinium (DMAP) bis(trifluoromethylsulfonyl)-amide ionic liquids with specific functionalities (alkyl, alkoxy, hydroxyalkyl and benzyl) were designed, characterized and compared with their pyridinium analogs in terms of their physical and radiolytic properties. The influence of the dimethylamino group on ionic liquid structure was investigated by X-ray diffraction and molecular dynamics simulations. The influence of the electron-donating ability of the dimethylamino-substituted cation is evident in the differences in the electronic density of states between the DMAP and pyridinium ILs. This leads to substantial changes in the radical transients observed in pulse radiolysis of the neat ILs. It was found that the DMAP salts were higher melting, more viscous and less conducting than their pyridinium analogs. However, the DMAP salts exhibited higher thermal stabilities and could therefore be useful for high-temperature applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

The ion-ion correlations in organic ionic plastic crystal

Organic ionic plastic crystals (OIPCs) are emerging as promising electrolyte materials for solid-state batteries. However, despite the fast ionic diffusion, OIPCs exhibit relatively low DC conductivity in solid phases caused by strong ion-ion correlations that suppress charge transport. To understand the origin of this suppression, we performed a study of ion dynamics in the OIPC 1-Ethyl-1-methylpyrrolidinium bis (trifluoromethyl sulfonyl) imide [P 12 ][TFSI] utilizing dielectric spectroscopy, light scattering, and Nuclear Magnetic Resonance diffusometry. Comparison of the results obtained in this study with the published earlier results on an OIPC with a completely different structure (Diethyl(methyl)(isobutyl)phosphonium Hexafluorophosphate [P 1,2,2,4 ][PF 6 ]) revealed strong similarities in ion dynamics in both systems. Unlike DC conductivity, which may drop more than ten times between melted and solid phases, diffusion of anions and cations remains high and does not show strong changes at phase transition. The conductivity spectra in the broad frequency range demonstrate unusual shapes in solid phases with an additional step separating fast local ion motions from suppressed long-range charge diffusion controlling DC conductivity. We suggested that in solid phases, anions and cations can jump only between the specific ion sites defined by the crystalline structure. These constraints lead to strong cation-cation and anion-anion correlations strongly suppressing long-range charge transport.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Fuel Cell Membrane Electrode Assemblies with Ultra-Low Pt Nanofiber Electrodes (Final Report)

H 2 /air fuel cell membrane-electrode-assemblies (MEAs) were fabricated with electrospun particle/polymer nanofiber mat cathodes (0.1 mg Pt /cm 2 or 0.2 mg Pt /cm 2 Pt/C, PtCo/C or PtNi/C) and anodes (0.1 mg/cm 2 Pt/C), where the binder was a mixture of acid-form perfluorosulfonic acid ionomer (e.g., Nafion™) and poly(acrylic acid) (PAA) carrier polymer or sodium-form PFSA with a carrier polymer of either PAA or polyethylene oxide (PEO). For the latter two cases, the water-soluble carrier was removed from the fibers after electrospinning. MEAs with Pt/C anode/cathode catalyst loadings of 0.1 mg Pt /cm2 each, an 1100 EW PFSA binder (Nafion™ dispersion), and a Nafion 211 membrane produced high power at both high and low relative humidity (RH) conditions, e.g., a maximum power density of 919 mW/cm 2 at 100% RH and 832 mW/cm 2 at 40% RH for a test at 80 °C and 200 kPa abs . The high power at low RH was attributed to nm-size pores within the fibers that trap water via capillary condensation thus maintaining a high proton conductivity of the PFSA binder in the cathode and especially the anode while minimizing/eliminating ionic isolation of catalyst particles in low water content, poorly conductive binder. At the same time, micro-porosity between fibers in the cathode allows for fast removal of electrogenerated water, thus minimizing cathode flooding. Nanofiber MEAs with Pt alloy catalyst cathodes also performed well, where a fibrous PtCo/C catalyst cathode at a loading of 0.1 mg/cm 2 produced 20% more power than a conventional powder cathode MEA, e.g., a maximum power density of 1,045 mW/cm 2 vs. 869 mW/cm 2 at 80 °C, 100% RH, and 200 kPa abs , and a PtNi/C fiber cathode MEAs prepared with Na+-form Nafion + PEO generated a maximum power of 820 mW/cm 2 at 40% RH. Fiber electrode MEAs with a neat Nafion binder (prepared from Na+-form Nafion + PEO or PAA) where the cathode Pt loading was ~0.1 mg/cm 2 exhibited a 25% loss in maximum power at 30,000 metal dissolution cycles, as compared to a 12% loss when the cathode binder was H+-form Nafion + PAA. The performance of a fiber mat electrode MEA with Pt/C catalyst (0.2 mg/cm 2 cathode loading and 0.1 mg/cm 2 anode loading) was excellent. At 80 oC and 200 kPa abs , the maximum power density was 1104 mW/cm 2 . The maximum power was independent of feed gas humidity for 40 < RH < 100%. The power loss after a metal dissolution AST (30,000 voltage cycles) was only 13%.

08 HYDROGEN↗
DOE OSTI2020

Tuning the dynamics of imidazolium-based ionic liquids via hydrogen bonding. I. The viscous regime

Combining results from impedance spectroscopy and oscillatory shear rheology, this study focuses on the relation between the mass and charge flows and on how these are affected by the H-bonding in viscous ionic liquids (ILs). In particular, we compare the relaxational behaviors of the paradigmatic IL 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (EMIM-TFSI) and its OH-functionalized counterpart 1-(2-hydroxyethyl)-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (OHEMIM-TFSI). Our results and their analysis demonstrate that the presence of cationic OH-groups bears a strong impact on the overall dynamics of OHEMIM-TFSI, although no signatures of suprastructural relaxation modes could be identified in their dielectric and mechanical responses. To check whether at the origin of this strong variation is the H-bonding or merely the difference between the corresponding cation sizes (controlling both the hydrodynamic volume and the inter-charge distance), the present study includes 1-propyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (PMIM-TFSI), mixtures of EMIM-TFSI and PMIM-TFSI with lithium bis(trifluoromethylsulfonyl)imide (Li-TFSI), and mixtures of OHEMIM-TFSI with PMIM-TFSI. Their investigation clearly reveals that the dynamical changes induced by H-bonding are significantly larger than those that can be attributed to the change in the ion size. Moreover, in the mixtures of OHEMIM-TFSI with PMIM-TFSI, a dilution of the OH-groups leads to strong deviations from ideal mixing behavior, thus highlighting the common phenomenological ground of hydroxy-functionalized ILs and other H-bonded liquids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Electrical Behavior of Combinatorial Thin-Film Zr x Ta 1−x O y

Combinatorial magnetron sputtering and electrical characterization were used to systematically study the impact of compositional changes in the resistive switching of transition metal oxides, specifically the Zr x Ta 1−x O y system. Current-voltage behavior across a range of temperatures provided insights into the mechanisms that contribute to differences in the electrical conductivity of the pristine Ta 2 O 5 and ZrO 2 , and mixed Zr x Ta 1−x O y devices. The underlying conductive mechanism was found to be a mixture of charge trapping and ionic motion, where charge trapping/emission dictated the short-term cycling behavior while ion motion contributed to changes in the conduction with increased cycling number. ToF-SIMS was used to identify the origin of the “wake-up” behavior of the devices, revealing an ionic motion contribution. This understanding of how cation concentration affects conduction in mixed valence systems helps provide a foundation for a new approach toward manipulating resistive switching in these active layer materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Tailored PEDOT:PSS hole transport layer for higher performance in perovskite solar cells: Enhancement of electrical and optical properties with improved morphology

Precise control over the charge carrier dynamics throughout the device can result in outstanding performance of perovskite solar cells (PSCs). Poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) is the most actively studied hole transport material in p-i-n structured PSCs. However, charge transport in the PEDOT:PSS is limited and inefficient because of its low conductivity with the presence of the weak ionic conductor PSS. In addition, morphology of the underlying PEDOT:PSS layer in PSCs plays a crucial role in determining the optoelectronic quality of the active perovskite absorber layer. This work is focused on realization of a non-wetting conductive surface of hole transport layer suitable for the growth of larger perovskite crystalline domains. This is accomplished by employing a facile solvent-engineered (ethylene glycol and methanol) approach resulting in removal of the predominant PSS in PEDOT:PSS. The consequence of acquiring larger perovskite crystalline domains was observed in the charge carrier dynamics studies, with the achievement of higher charge carrier lifetime, lower charge transport time and lower transfer impedance in the solvent-engineered PEDOT:PSS-based PSCs. Use of this solvent-engineered treatment for the fabrication of MAPbI3 PSCs greatly increased the device stability witnessing a power conversion efficiency of 18.18%, which corresponds to ~37% improvement compared to the untreated PEDOT:PSS based devices.

14 SOLAR ENERGY↗
DOE OSTI2022

A pseudo-two-dimensional (P2D) model for FeS 2 conversion cathode batteries

Conversion cathode materials are gaining interest for secondary batteries due to their high theoretical energy and power density. However, practical application as a secondary battery material is currently limited by practical issues such as poor cyclability. To better understand these materials, we have, for this study, developed a pseudo-two-dimensional model for conversion cathodes. We apply this model to FeS 2 – a material that undergoes intercalation followed by conversion during discharge. The model is derived from the half-cell Doyle–Fuller–Newman model with additional loss terms added to reflect the converted shell resistance as the reaction progresses. We also account for polydisperse active material particles by incorporating a variable active surface area and effective particle radius. Using the model, we show that the leading loss mechanisms for FeS 2 are associated with solid-state diffusion and electrical transport limitations through the converted shell material. The polydisperse simulations are also compared to a monodisperse system, and we show that polydispersity has very little effect on the intercalation behavior yet leads to capacity loss during the conversion reaction. Finally, we provide the code as an open-source Python Battery Mathematical Modeling (PyBaMM) model that can be used to identify performance limitations for other conversion cathode materials.

25 ENERGY STORAGE↗
DOE OSTI2020

Coupling between interfacial charge and mechanical deformation at high temperatures in ceramics. Final report

Basic research, under this project, has led to new fundamental discoveries in the effect of electric field (and temperature) on diffusion kinetics, electroluminescence and electronic conductivity in ceramic materials. For example, yttria stabilized zirconia sinters in just seconds well below 1000°C, while, at the same time, exhibiting a highly non-linear rise in conductivity, and intense electroluminescence. The phenomenon has been shown to occur in nearly all ceramics whether they are ionic or electronic conductors, or insulators. The rise in conductivity leads to Joule heating but in-situ measurements with a platinum standard at APS and Brookhaven (NSLS-II) have shown that the temperatures are much below what would have been needed to sinter in a few seconds. We have explored the hypothesis that huge concentrations of Frenkel pairs of vacancies and interstitials are produced. While these point defects accelerate sintering (by the interstitials being transported to the pores and the vacancies to the grain boundaries), they may also produce electron-hole pairs which can impart high electrical conductivity or recombine to emit photons. Many measurements, including in-situ measurements of lattice expansion are consistent with this hypothesis. However, the energy barrier for generating Frenkels in zirconia for example is much larger than can be expected at temperature and electrical fields in these experiments. Most recent work suggests that short wavelength phonons play a critical role in the genesis of the “flash” phenomenon. For example, the Debye temperature has been shown to be the lower bound for initiating flash. Molecular dynamics simulations have shown that large concentrations of Frenkel pairs can form under the proliferation of “optical” phonons at the edge of the Brillouin zone, that is with a wavelength at or below the lattice parameter. This project has led to the development of new experimental techniques as well as a software hardware interface for process and control and data analysis in real time, with a time scale of less than one second. This approach spells a new paradigm in materials science research. It potential impact on high rate manufacturing is self evident.

36 MATERIALS SCIENCE↗