Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “high performance computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Energy-Aware Route Planning with RouteE Compass

This poster introduces RouteE Compass, a new tool that advances sustainable transportation by enabling energy-aware route planning across diverse vehicle types and large-scale road networks. By addressing practical trade-offs between energy consumption, travel time, and economic cost, RouteE Compass fills critical gaps in traditional routing methods, which often lack the flexibility to prioritize energy directly. The tool's scalability and high-performance computing capabilities allow for national-scale analyses, offering actionable insights for fleet operators, transit agencies, and researchers. As an open-source, extensible platform, RouteE Compass empowers ongoing research and innovation in energy-aware routing, supporting the broader goals of reducing emissions and enhancing transportation sustainability.

ADVANCED PROPULSION SYSTEMS,DIRECT ENERGY CONVERSI↗
DOE OSTI2020

3D Coded SUMMA: Communication-Efficient and Robust Parallel Matrix Multiplication

In this paper, we propose a novel fault-tolerant parallel matrix multiplication algorithm called 3D Coded SUMMA that achieves higher failure-tolerance than replication-based schemes for the same amount of redundancy. This work bridges the gap between recent developments in coded computing and fault-tolerance in high-performance computing (HPC). The core idea of coded computing is the same as algorithm-based fault-tolerance (ABFT), which is weaving redundancy in the computation using error-correcting codes. In particular, we show that MatDot codes, an innovative code construction for parallel matrix multiplications, can be integrated into three-dimensional SUMMA (Scalable Universal Matrix Multiplication Algorithm [30]) in a communication-avoiding manner. To tolerate any two node failures, the proposed 3D Coded SUMMA requires ~50% less redundancy than replication, while the overhead in execution time is only about 5–10%.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2019

Development of the multigroup cross section library for the CASL neutronics simulator MPACT: Method and procedure

The MPACT neutronics module of the Consortium for Advanced Simulation of Light Water Reactors (CASL) core simulator is a 3D whole core transport code being developed for the CASL toolset known as the Virtual Environment for Reactor Analysis (VERA). Key characteristics of the MPACT code include a subgroup method for resonance self-shielding and a whole-core transport solver with a 2D/1D synthesis method. The AMPX and SCALE code packages have been significantly improved to include intermediate resonance parameters, as well as new modules to enhance the accuracy of resonance data and scattering matrices for the Bondarenko approach and transport cross sections of hydrogen. In addition, CASL XSTools have been developed to generate the MPACT multigroup cross section library. A simple super-homogenization method for 238U has been developed to resolve reaction rate discrepancy issues caused by angle-dependent total cross sections, poor scattering matrices, and a poor resonance interference model at coarse group structure. Here, due to the limitation of computing capacity that can occur even in high performance computing, a new 51-group structure has been developed for efficient simulation that is applicable for both pressurized water reactor (PWR) and boiling water reactor (BWR) simulations. A new ENDF/B-VII.1 MPACT 51-group library has been developed using the AMPX/SCALE and XSTools code packages, and it has been verified and validated by performing various benchmark calculations.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

Insights From Dayflow: A Historical Streamflow Reanalysis Dataset for the Conterminous United States

Abstract Reconstructed historical streamflow time series can supplement limited streamflow gauge observations. However, there are common challenges of typical modeling approaches: process‐based hydrologic models can be data/computation‐intensive, and statistics‐based models can be region/stream‐specific. Here we present a nationally scalable modeling framework integrating the simulated runoff from the Variable Infiltration Capacity (VIC) model with the Routing Application for Parallel computatIon of Discharge (RAPID) routing model leveraging high‐performance computing. We demonstrate an efficient method of assimilating streamflow at US Geological Survey (USGS) streamflow monitoring sites using a simple hierarchical approach in the VIC‐RAPID framework. The result is a reconstructed 36‐year (1980–2015) daily and monthly streamflow dataset (Dayflow) at ∼2.7 million NHDPlusV2 stream reaches in the conterminous US (CONUS). We perform a comprehensive evaluation at 7,526 USGS sites and characterize their error statistics. The results demonstrate that 49% of the USGS sites demonstrate Kling–Gupta Efficiency (KGE) > 0.5 and 58% of the sites show percentage bias within ±20% for the daily naturalized streamflow. Streamflow data assimilation across CONUS shows an overall improvement over naturalized streamflow, notably in the western semiarid‐to‐arid regions. Comparison to other national and global streamflow reanalysis datasets such as the National Water Model and Global Reach‐scale A priori Discharge Estimates for SWOT demonstrates improved KGE, reduced bias, and directions for Dayflow improvements. Investigations of error statistics with key hydrologic, hydroclimatic, and geomorphologic basin characteristics reveal region‐specific patterns which may help improve future framework applications. Overall, Dayflow may enable a better understanding of hydrologic conditions in a changing environment, especially in locations currently not represented by streamflow monitoring networks.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Randomized low-rank decompositions of nuclear three-body interactions

First-principles simulations of many-fermion systems are commonly limited by the computational requirements of processing large data objects. As a remedy, we propose the use of low-rank approximations of three-body interactions, which are the dominant such limitation in nuclear physics. We introduce a randomized decomposition technique to handle the excessively large matrix dimensions and study the sensitivity of low-rank properties to interaction details. The developed low-rank three-nucleon interactions are benchmarked in ab initio simulations of few- and many-body systems. Exploiting low-rank properties provides a promising route to extend the microscopic description of atomic nuclei to large systems where storage requirements exceed the computational capacities of the most advanced high-performance computing facilities.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2019

Figures of merit for production HPC

This report summarizes a set of figures of merit of interest in monitoring the hardware and hardware usage in a Sandia high performance computing (HPC) center. These figures are computable from high frequency monitoring data and other non-metric data and may aid administrators and customer support personnel in their decision processes. The figures are derived from interviews of the HPC center staff. The figures are in many cases simplistic data reductions, but they are our initial targets in creating dashboards that turn voluminous monitoring data into actionable information. Because simplistic reductions may obscure as well as reveal the situation under study, we also document the necessary 'drill-down' and %60exploration' views needed to make the data better understood quickly. These figures of merit may be compared to dashboarding tools documented by other HPC centers.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

NEAMS Workbench Workflows

Modeling and simulation efforts frequently involve loosely coupled workflows. Automation of workflows, data exchanges, and simulation software execution is a productive and often desired feature or improvement for enhancing consistency of results and productivity of the analyst. It facilitates cross-collaboration of different analysts of multidisciplinary simulation by streamlining data exchange processes across local and high performance computing resources. This report proposes a high-level, extensible workflow module to enable consistent and efficient use of tools integrated into the Nuclear Energy Advanced Modeling and Simulation (NEAMS) Workbench with as little user intervention as possible.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Physics Basis, Optimization, and Control for Integrated 3D Edge Long-pulse Tokamak Scenarios

The aim of this project with international collaborations (PI: J.-K. Park of Princeton Plasma Physics Laboratory) is to develop a unified physics basis and predictive capability for the control of edge-localized modes (ELMs) with optimized non-axisymmetric (3D) fields, by leveraging the unique research capabilities of international KSTAR tokamak in Korea. At the University of California, Irvine, we use a fusion simulation code GTC to study the effects of the 3D magnetic fields (including both magnetic islands and stochastic magnetic field lines) on microturbulence. We focus on the effects of 3D equilibrium on turbulent and neoclassical transport that leads to ELM suppression. During the project period, the UCI team of this collaboration has made significant progress in understanding turbulent transport in 3D geometry including both tokamaks with RMP and stellarators. Four UCI postdoctoral researchers, Drs. Javier Nicolau, Gyungjin Choi, Pengfei Liu, and Xishuo Wei were partially supported by this project and collaborating with the entire project team. We have published 4 journal papers and gave several invited talks. This project advance physics understand of 3D effects on microturbulence, specially effects of magnetic islands. It will contribute to the DOE SciDAC ISEP project in the area of GTC development for general 3D geometry capability, rigorous verification and validation, and readiness for the emerging exascale computing. Through collaborations with computational scientists, the project helps to advance high performance computing in the area of GPU acceleration, linear solver, and data management.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2016

Measurements of file transfer rates over dedicated long-haul connections

Wide-area file transfers are an integral part of several High-Performance Computing (HPC) scenarios. Dedicated network connections with high capacity, low loss rate and low competing traffic, are increasingly being provisioned over current HPC infrastructures to support such transfers. To gain insights into these file transfers, we collected transfer rate measurements for Lustre and xfs file systems between dedicated multi-core servers over emulated 10 Gbps connections with round trip times (rtt) in 0-366 ms range. Memory transfer throughput over these connections is measured using iperf, and file IO throughput on host systems is measured using xddprof. We consider two file system configurations: Lustre over IB network and xfs over SSD connected to PCI bus. Files are transferred using xdd across these connections, and the transfer rates are measured, which indicate the need to jointly optimize the connection and host file IO parameters to achieve peak transfer rates. In particular, these measurements indicate that (i) peak file transfer rate is lower than peak connection and host IO throughput, in some cases by as much as 50% or lower, (ii) xdd request sizes that achieve peak throughput for host file IO do not necessarily lead to peak file transfer rates, and (iii) parallelism in host IO and TCP transport does not always improve the file transfer rates.

log-haul connections↗
DOE OSTI2016

Measurements of file transfer rates over dedicated long-haul connections

Wide-area file transfers are an integral part of several High-Performance Computing (HPC) scenarios. Dedicated network connections with high capacity, low loss rate and low competing traffic, are increasingly being provisioned over current HPC infrastructures to support such transfers. To gain insights into these file transfers, we collected transfer rate measurements for Lustre and xfs file systems between dedicated multi-core servers over emulated 10 Gbps connections with round trip times (rtt) in 0-366 ms range. Memory transfer throughput over these connections is measured using iperf, and file IO throughput on host systems is measured using xddprof. We consider two file system configurations: Lustre over IB network and xfs over SSD connected to PCI bus. Files are transferred using xdd across these connections, and the transfer rates are measured, which indicate the need to jointly optimize the connection and host file IO parameters to achieve peak transfer rates. In particular, these measurements indicate that (i) peak file transfer rate is lower than peak connection and host IO throughput, in some cases by as much as 50% or lower, (ii) xdd request sizes that achieve peak throughput for host file IO do not necessarily lead to peak file transfer rates, and (iii) parallelism in host IO and TCP transport does not always improve the file transfer rates.

Rao, Nageswara S↗
DOE OSTI2020

FY2019 Energy Efficient Mobility Systems Annual Progress Report

EEMS Program activities during FY 2019 focused on analytical research to understand the impacts that new mobility technologies and services will have at the vehicle, traveler, and overall transportation system-level. This research included the development of vehicle and transportation system simulation models and tools to evaluate the complex interactions among the various actors within the mobility landscape, analysis of empirical data to characterize which solutions may provide the largest benefits, and development of new control systems and algorithms that use vehicle connectivity and automation to improve the performance and efficiency of individual vehicles as well as the overall traffic system. This document presents a brief overview of the EEMS Program and documents progress and results for projects within four of the five EEMS activity areas: (1) the SMART (Systems and Modeling for Accelerated Research in Transportation) Mobility Lab Consortium, (2) High Performance Computing and Big Data Solutions for Mobility Data, (3) Advanced R&D Projects conducted by industry and academia, and (4) Core Modeling, Simulation, and Evaluation, Similarly, the remaining EEMS activity area – (5) Living Labs (managed under VTO’s Technology Integration Program). Each of the individual progress reports provide a project overview and highlights of the technical results.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

Advances in Multiscale Modeling of Lignocellulosic Biomass

Applications and associated processing technologies of lignocellulosic biomass are becoming more important as we endeavor to meet societal demand for fuels, chemicals, and materials from renewable resources. Meanwhile, the rapidly expanding availability and capabilities of high-performance computing present an unprecedented opportunity to accelerate development of technologies surrounding lignocellulose utilization. In order to realize this potential, suitable modeling frameworks must be constructed that effectively capture the multiscale complexity and tremendous variety exhibited by lignocellulosic materials. In our assessment of previous endeavors towards this goal, several important shortcomings have been identified: (1) the lack of multiscale integration strategies that capture emergent properties and behaviors spanning different length scales, and (2) the inability of many modeling approaches to effectively capture the variability and diversity of lignocellulose that arise from both natural and process-induced sources. In this perspective, we survey previous modeling approaches for lignocellulose and simulations processes involving its chemical and mechanical transformation, and suggest opportunities for future development to enhance the utility of computational tools to address barriers to widespread adoption of a renewable bioeconomy.

09 BIOMASS FUELS↗
DOE OSTI2019

Energy Efficient Mobility Systems 2018 Annual Progress Report

Energy Efficient Mobility Systems (EEMS) Program activities during FY 2018 focused on analytical research to understand the impacts that new mobility technologies and services will have at the vehicle, traveler, and overall transportation system-level. This research included the development of vehicle and transportation system simulation models and tools to evaluate the complex interactions among the various actors within the mobility landscape, analysis of empirical data to characterize which solutions may provide the largest benefits, and development of new control systems and algorithms that use vehicle connectivity and automation to improve the performance and efficiency of individual vehicles as well as the overall traffic system This document presents a brief overview of the EEMS Program and documents progress and results for projects within four of the five EEMS activity areas: (1) the SMART (Systems and Modeling for Accelerated Research in Transportation) Mobility Lab Consortium, (2) High Performance Computing and Big Data Solutions for Mobility Data, (3) Advanced R&D Projects conducted by industry and academia, and (4) Core Modeling, Simulation, and Evaluation, Similarly, the remaining EEMS activity area – (5) Living Labs (managed under VTO’s Technology Integration Program). Each of the individual progress reports provide a project overview and highlights of the technical results.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Visual HPC Workflows for the Analysis of System Dynamics Models

Visual analytics supported by high performance computing (HPC) accelerates and enhances the discovery, exploration, and analysis of causal patterns in complex system dynamics (SD) models. We present a suite of visualization-assisted ensemble-based techniques for hypothesis generation and testing, and for sensitivity analysis. By employing HPC to provide parallel, on-demand simulation of SD models, one can “steer” an ensemble of simulated scenarios in real time as one first formulates and then informally tests those hypotheses: this provides rapid feedback for analysts to refine their understanding of the causal relationships emergent from a model. Such understandings can be followed and augmented by rigorous application of statistical methods, namely global variance-based sensitivity analysis, Monte-Carlo filtering, adaptive regional sensitivity analysis, and self-organized maps: here timely computation relies on HPC, while effective presentation emphasizes high-dimensional multivariate data visualization. Immersive visualization in virtual 3D environments provides an excellent adjunct to the traditional 2D graphics typically used for SD models, as it generates an embodied understanding of model behavior and facilitates an active, collaborative critique of model structure and output. Finally, we summarize prospects for HPC-enabled visual analytics applied to SD modeling.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2019

Using Compiler Directives for Performance Portability in Scientific Computing: Kernels from Molecular Simulation

Achieving performance portability for high-performance computing (HPC) applications in scientific fields has become an increasingly important initiative due to large differences in emerging supercomputer architectures. Here we test some key kernels from molecular dynamics (MD) to determine whether the use of the OpenACC directive-based programming model when applied to these kernels can result in performance within an acceptable range for these types of programs in the HPC setting. We find that for easily parallelizable kernels, performance on the GPU remains within this range. On the CPU, OpenACC-parallelized pairwise distance kernels would not meet the performance standards required, when using AMD Opteron “Interlagos” processors, but with IBM Power 9 processors, performance remains within an acceptable range for small batch sizes. These kernels provide a test for achieving performance portability with compiler directives for problems with memory-intensive components as are often found in scientific applications.

Sedova, Ada↗
DOE OSTI2015

A new surrogate modeling technique combining Kriging and polynomial chaos expansions – Application to uncertainty analysis in computational dosimetry

In numerical dosimetry, the recent advances in high performance computing led to a strong reduction of the required computational time to assess the specific absorption rate (SAR) characterizing the human exposure to electromagnetic waves. However, this procedure remains time-consuming and a single simulation can request several hours. As a consequence, the influence of uncertain input parameters on the SAR cannot be analyzed using crude Monte Carlo simulation. The solution presented here to perform such an analysis is surrogate modeling. This paper proposes a novel approach to build such a surrogate model from a design of experiments. Considering a sparse representation of the polynomial chaos expansions using least-angle regression as a selection algorithm to retain the most influential polynomials, this paper proposes to use the selected polynomials as regression functions for the universal Kriging model. The leave-one-out cross validation is used to select the optimal number of polynomials in the deterministic part of the Kriging model. The proposed approach, called LARS-Kriging-PC modeling, is applied to three benchmark examples and then to a full-scale metamodeling problem involving the exposure of a numerical fetus model to a femtocell device. The performances of the LARS-Kriging-PC are compared to an ordinary Kriging model and to a classical sparse polynomial chaos expansion. The LARS-Kriging-PC appears to have better performances than the two other approaches. A significant accuracy improvement is observed compared to the ordinary Kriging or to the sparse polynomial chaos depending on the studied case. This approach seems to be an optimal solution between the two other classical approaches. A global sensitivity analysis is finally performed on the LARS-Kriging-PC model of the fetus exposure problem.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗