Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hands”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Development and demonstration of flueric sounding rocket motor ignition

An analytical and experimental program is described which established a flueric rocket motor ignition system concept incorporating a pneumatic match with a simple hand pump as the only energy source. An evaluation was made of this concept to determine the margins of the operating range and capabilities of every component of the system. This evaluation included a determination of power supply requirements, ignitor geometry and alinement, ignitor/propellant interfacing and materials and the effects of ambient temperatures and pressure. It was demonstrated that an operator using a simple hand pump for 30 seconds could ignite BKNO3 at a standoff distance of 100 m (330 ft) with the only connection to the ignitor being a piece of plastic pneumatic tubing.

Marchese, V. P.↗
NASA NTRS1974

The application of large numbers of pleasure boats to collect synoptic sea-truth for ERTS-1 overpasses

The author has identified the following significant results. In order to interpret and annotate current circulation and suspended sediment concentration maps derived from ERTS-1 digital tapes, the University of Delaware has been collecting water samples and other data from boats and helicopters. In order to increase the number of samples at the exact time of the ERTS-1 pass over Delaware Bay, pleasure craft were organized to obtain samples of the entire test site. On the ERTS-1 pass of July second, scientists were stationed at three public boat launches along the Bay to hand out sampling packets to interested boaters. The packets contained two litre sampling bottles, a map, data card, and a pen. The boaters were asked to fill the two bottles between 11 and 11:15 a.m., mark their location on the map, and fill out the data card. Forty-nine packets were handed out of which 40 were returned (82%). Only four of the 40 were not in the alloted time range. This gave 36 real time data points covering approximately 30 nautical miles. The samples are being analyzed for sediment concentration, particle size, and salinity. Participating boaters will receive a copy of an ERTS image of the Delaware Bay and a summary report of the project. Because of the success of the project, future use of pleasure boaters is being planned.

Klemas, V.↗
NASA NTRS1974

Application of ERTS and EREP images to geologic investigations of the basin and range: Colorado plateau boundary in northwestern and north-central Arizona

The author has identified the following significant results. In the course of the ERTS investigation in the Cataract Creek Basin of the Coconino Plateau it was recognized that shallow perched ground water associated with the Kaibab Limestone could be discovered by means of drilling guided by geologic mapping aided by the use of ERTS imagery. At the Globe Ranch, the perched water table is only 5 meters beneath the surface at the site of the original, hand dug well. Recharge occurs from local runoff and from direct precipitation on the outcrop belt of the sandstone. This well provides water for the ranch at the rate of about 1,000 gallons a week. In order to explore the possibility of further developing this aquifer, unit 5 was mapped over an area of about 50 square miles in the vicinity of the hand-dug well, with negative results. A new location was then picked for drilling based on the occurrence of unit 5 in a favorable structural setting. This location was along a normal fault, and it was anticipated that water might be structurally trapped within the down-dropped block of the fault. Four shallow testholes were drilled and all encountered water. These four water-bearing holes are currently being monitored and will be tested to determine potential production of water from the local sandstone aquifer.

Goetz, A. F. H.↗
NASA NTRS1973

Spectral ratio imaging methods for geological remote sensing from aircraft and satellites

An improved photogrammetric technique (scannergrammetry) for the production of ratio images from multispectral scanner data is described. The multispectral technique is less affected by variations in atmospheric and solar illumination levels than single-channel scanner imagery of aerial photographs. Another advantage of the multispectral technique is the proportionality between ratios of a target deduced from ratio images, on the one hand, and ratios of reflectances calculated from laboratory spectra of samples from the target area, on the other hand. Several representative ratio images from aircraft and satellite data in the visible, reflective IR, and thermal IR regions are included. The geological applications suggested for ratio scannergrammetry include exploration of construction materials, soils, stratigraphy, volcanic ash flows, beaches, and sand dunes.

Vincent, R. K.↗
NASA NTRS1974

Derivatives of eigenvalues and eigenvectors for a general matrix

Expressions are obtained for the derivatives of the eigenvalues and eigenvectors which are expressions of only one left-hand and one right-hand eigenvector. The approach described makes use of a Choleski decomposition or some other decomposition method. The method may be extended to find any order of derivative of the eigenvalue and eigenvector. The expressions obtained for finding the derivatives of eigenvalues and eigenvectors for nonself-adjoint systems may be applied to self-adjoint systems.

Rudisill, C. S.↗
NASA NTRS1974

Computation of solar perturbations with Poisson series

Description of a project for computing first-order perturbations of natural or artificial satellites by integrating the equations of motion on a computer with automatic Poisson series expansions. A basic feature of the method of solution is that the classical variation-of-parameters formulation is used rather than rectangular coordinates. However, the variation-of-parameters formulation uses the three rectangular components of the disturbing force rather than the classical disturbing function, so that there is no problem in expanding the disturbing function in series. Another characteristic of the variation-of-parameters formulation employed is that six rather unusual variables are used in order to avoid singularities at the zero eccentricity and zero (or 90 deg) inclination. The integration process starts by assuming that all the orbit elements present on the right-hand sides of the equations of motion are constants. These right-hand sides are then simple Poisson series which can be obtained with the use of the Bessel expansions of the two-body problem in conjunction with certain interation methods. These Poisson series can then be integrated term by term, and a first-order solution is obtained.

Broucke, R.↗
NASA NTRS1975

System for interference signal nulling by polarization adjustment

A receiving system for automatically selecting a desired one of two approximately orthogonally polarized signals occupying the same bandwidth, is described. Received signals are provided by any orthomode antenna system at a pair of output ports, i.e., right hand and left hand circular polarizations or two linear polarizations. The received signals are then applied to the inputs of a hybrid junction to produce sum and difference signals. The resulting sum signal at one output port comprises components of the undesired one of two orthogonally polarized signals and is used to coherently detect and dynamically balance out the undesired signal components that are included at the difference signal port. The desired one of two orthogonally polarized signals is thereby provided at the difference port of the hybrid junction. Feedback loops are used to effect dynamic balancing.

Ohlson, J. E.↗
NASA NTRS1975

Aerodynamic results of a separation effects test on a 0.01-scale model (52-OTS) of integrated SSV in the AEDC/VKF 40-by-40 inch supersonic wind tunnel A, volume 1

Experimental aerodynamic investigations were conducted, during the period July 18-19, 1974, in the AEDC/VKF Tunnel A facility on a 0.01-scale model (52-OTS) of the integrated space shuttle vehicle, including only one SRB. The purpose of the investigation was to obtain data for close-in proximity (SRB to orbiter/tank) effects with the orbiter/tank combination at relatively high alpha and beta attitudes, and with the SRB separation motors off. The AEDC Captive Trajectory System (CTS), which supported the SRB, was used in conjunction with the tunnel primary sector (supporting the orbiter/tank) to obtain grid type separation effects data. The one symmetrical SRB model was used interchangeably to obtain both right-hand and left-hand SRB data. Free-stream data were also obtained for the orbiter/tank and for the SRB. This data was used to provide baselines for proximity effects. The entire investigation was conducted at a free-stream Mach number of 4.5 with unit Reynolds number ranging from 4.0 to 6.5 million per foot.

Campbell, J. H., II↗
NASA NTRS1975

Standing waves at low Mach number laminar bow shocks

Explorer 43 data were used to study 34 bow shock crossings observed from 5 to 16 earth radii upstream of the average bow shock location. Waves with periods of 6 to 130 s having amplitudes up to delta-B/B = 1 were detected. Wave polarization for the low-frequency waves is right-handed in relation to the average field direction when the observer moves from the upstream to downstream direction but is left-handed when the observer moves in the opposite sense. This fact identified the waves as standing whistler waves in the coordinate system of the shock. The waves are in agreement with collisionless low Mach number laminar shock theory. When the measured parameters were used to calculate theoretical wavelengths, the observed wave frequencies could be used to calculate velocities for the shock-wave coordinate system past the spacecraft; such velocities are mostly between 10 and 30 km/s. It is suggested that the higher-frequency propagating whistler waves may evolve from the standing whistler waves through a decay instability.

Fairfield, D. H.↗
NASA NTRS1975

Numerical methods for evaluating the derivatives of eigenvalues and eigenvectors

Two numerical methods are presented for computing the derivatives of eigenvalues and eigenvectors which do not require complete solution of the eigenvalue problem if only a few derivatives are sought. The 'iterative' method may be used to find the first derivative of one or all of the eigenvectors together with the second derivative of their eigenvalues in a self-adjoint system. If the left- and right-hand eigenvectors are known, the first derivative of the eigenvector corresponding to the largest eigenvalue and the second derivative of the largest eigenvalue may be obtained for a nonself-adjoint system. The 'algebraic' method may be used to find all orders of the derivatives, provided they exist, without requiring the left-hand eigenvectors.

Rudisill, C. S.↗
NASA NTRS1975

Design and fabrication of an end effector

The construction is described of a prototype mechanical hand or 'end effector' for use on a remotely controlled robot, but with possible application as a prosthetic device. An analysis of hand motions is reported, from which it is concluded that the two most important manipulations (apart from grasps) are to be able to pick up a tool and draw it into a nested grip against the palm, and to be able to hold a pistol-grip tool such as an electric drill and pull the trigger. A model was tested and found capable of both these operations.

Crossley, F. R. E.↗
NASA NTRS1976

Results of Skylab experiment T00-2, manual navigation sightings

An analysis of navigation data collected using a hand-held space sextant on the second and third manned Skylab missions was presented. From performance data and astronaut comments it was determined that: (1) the space sextant, the sighting station, and the sighting techniques require modification; (2) the sighting window must be of good optical quality; (3) astronaut performance was stable over long mission time; and (4) sightings made with a hand-held sextant were accurate and precise enough for reliable interplanetary manual navigation.

Randle, R. J.↗
NASA NTRS1976

Aerodynamic results of a separation effects test on a 0.010-scale model (52-OTS) of the integrated SSV in the AEDC/VKF 40-by-40 inch supersonic wind tunnel A (IA111), volume 1

Graphical data obtained during experimental wind tunnel aerodynamic investigations of a 0.010 scale model (52-OTS) of the integrated space shuttle vehicle was presented. The purpose of this investigation was to obtain data with the solid rocket booster (SRB) in proximity to the orbiter/external tank (O/ET), over a large O/ET initial angle of attack and sideslip range, as well as data on the SRB alone (greatly separated from the O/ET). A captive trajectory system, which supported the SRB, was used with the tunnel primary sector (supporting the O/ET) to obtain grid type separation effects data. One symmetrical SRB model was used interchangeably to obtain right-hand and left-hand SRB data. The entire investigation was conducted at a free-stream Mach number of 4.5 at unit Reynolds number of 3.95 and 5.9 million per foot.

Chee, E.↗
NASA NTRS1976

Aerodynamic results of a separation effects test on a 0.010-scale model (52-OTS) of the integrated SSV in the AEDC/VKF 40-by-40 inch supersonic wind tunnel A (IA111), volume 2

Tabular data obtained during experimental wind tunnel aerodynamic investigations of a 0.010 scale model (52-OTS) of the integrated space shuttle vehicle was presented. The purpose of this investigation was to obtain data with the solid rocket booster (SRB) in proximity to the orbiter/external tank (O/ET), over a large O/ET initial angle of attack and sideslip range, as well as data on the SRB alone (greatly separated from the O/ET). A captive trajectory system, which supported the SRB, was used with the tunnel primary sector (supporting the O/ET) to obtain grid type separation effects data. One symmetrical SRB model was used interchangeably to obtain right-hand and left-hand SRB data. The entire investigation was conducted at free-stream Mach number of 4.5 at unit Reynolds number of 3.95 and 5.9 million per foot.

Chee, E.↗
NASA NTRS1976

Computation of turbulent boundary layers on curved surfaces, 1 June 1975 - 31 January 1976

An accurate method was developed for predicting effects of streamline curvature and coordinate system rotation on turbulent boundary layers. A new two-equation model of turbulence was developed which serves as the basis of the study. In developing the new model, physical reasoning is combined with singular perturbation methods to develop a rational, physically-based set of equations which are, on the one hand, as accurate as mixing-length theory for equilibrium boundary layers and, on the other hand, suitable for computing effects of curvature and rotation. The equations are solved numerically for several boundary layer flows over plane and curved surfaces. For incompressible boundary layers, results of the computations are generally within 10% of corresponding experimental data. Somewhat larger discrepancies are noted for compressible applications.

Wilcox, D. C.↗
NASA NTRS1976

Zonal and tesseral harmonic coefficients for the geopotential function, from zero to 18th order

Zonal and tesseral harmonic coefficients for the geopotential function are usually tabulated in normalized form to provide immediate information as to the relative significance of the coefficients in the gravity model. The normalized form of the geopotential coefficients cannot be used for computational purposes unless the gravity model has been modified to receive them. This modification is usually not done because the absolute or unnormalized form of the coefficients can be obtained from the simple mathematical relationship that relates the two forms. This computation can be quite tedious for hand calculation, especially for the higher order terms, and can be costly in terms of storage and execution time for machine computation. In this report, zonal and tesseral harmonic coefficients for the geopotential function are tabulated in absolute or unnormalized form. The report is designed to be used as a ready reference for both hand and machine calculation to save the user time and effort.

Kirkpatrick, J. C.↗
NASA NTRS1976

Accelerometer telemetry system

An accelerometer telemetry system incorporated in a finger ring is used for monitoring the motor responses of a subject. The system includes an accelerometer, battery, and transmitter and provides information to a remote receiver regarding hand movements of a subject wearing the ring, without the constraints of wires. Possible applications include the detection of fatigue from the hand movements of the wearer.

Konigsberg, E.↗
NASA NTRS1976

Remote sensing of land use and water quality relationships - Wisconsin shore, Lake Michigan

This investigation assessed the utility of remote sensing techniques in the study of land use-water quality relationships in an east central Wisconsin test area. The following types of aerial imagery were evaluated: high altitude (60,000 ft) color, color infrared, multispectral black and white, and thermal; low altitude (less than 5000 ft) color infrared, multispectral black and white, thermal, and passive microwave. A non-imaging hand-held four-band radiometer was evaluated for utility in providing data on suspended sediment concentrations. Land use analysis includes the development of mapping and quantification methods to obtain baseline data for comparison to water quality variables. Suspended sediment loads in streams, determined from water samples, were related to land use differences and soil types in three major watersheds. A multiple correlation coefficient R of 0.85 was obtained for the relationship between the 0.6-0.7 micrometer incident and reflected radiation data from the hand-held radiometer and concurrent ground measurements of suspended solids in streams. Applications of the methods and baseline data developed in this investigation include: mapping and quantification of land use; input to watershed runoff models; estimation of effects of land use changes on stream sedimentation; and remote sensing of suspended sediment content of streams. High altitude color infrared imagery was found to be the most acceptable remote sensing technique for the mapping and measurement of land use types.

Haugen, R. K.↗