Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “generation equation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Remarks on boundary-fitted coordinate system generation

The essential part of numerical solutions of partial differential equations is the representation of gradients and integrals by, respectively, differences between points and summations over points. In order for such numerical representations to be accurate, it is necessary that these points be more closely spaced in regions of large gradients. The need for accurate representation is particularly acute near body surfaces, since the boundary conditions are generally the most influential part of a partial differential equation solution. This is especially true of viscous solutions at high Reynolds number, where very large gradients occur in the boundary layer.

Thompson, J. F.↗

Solution of transient optimization problems by using an algorithm based on nonlinear programming

A new algorithm is presented for solution of dynamic optimization problems which are nonlinear in the state variables and linear in the control variables. It is shown that the optimal control is bang-bang. A nominal bang-bang solution is found which satisfies the system equations and constraints, and influence functions are generated which check the optimality of the solution. Nonlinear optimization (gradient search) techniques are used to find the optimal solution. The algorithm is used to find a minimum time acceleration for a turbofan engine.

Teren, F.↗

An implicit finite-difference code for inviscid and viscous cascade flow

An implicit finite-difference code is developed to solve either inviscid or viscous flow about two-dimensional cascade blade elements. General coordinate transformations are used so that boundaries can coincide with coordinate lines, and an automatic grid generation routine based on elliptic partial differential equations is employed to mesh arbitrary cascade elements. Characteristic combinations of the differential equations are used at inflow and outflow boundaries. Computed results for both inviscid and viscous flow are compared with other existing cascade solutions and experimental data.

Steger, J. L.↗

Simulation of three-dimensional incompressible flows with a vortex-in-cell method

A new method for the numerical simulation of three-dimensional incompressible flows is described. The vortex-in-cell (VIC) method presented traces the motion of the vortex filaments in the velocity field which these filaments create. The velocity field is not calculated directly by the Biot-Savart law of interaction but by creating a mesh-record of the vorticity field, then integrating a Poisson's equation via the fast Fourier transform to generate a mesh-record of the velocity field. The computed scales of motion are assumed to be essentially inviscid. Viscous of subgrid-scale effects are incorporated into a filtering procedure in wave vector space. Results of tracing a periodic array of single vortex rings are compared with a Green's function calculation. The agreement is very good.

Couet, B.↗

A normative price for energy from an electricity generation system: An Owner-dependent Methodology for Energy Generation (system) Assessment (OMEGA). Volume 1: Summary

The utility owned solar electric system methodology is generalized and updated. The net present value of the system is determined by consideration of all financial benefits and costs (including a specified return on investment). Life cycle costs, life cycle revenues, and residual system values are obtained. Break even values of system parameters are estimated by setting the net present value to zero. While the model was designed for photovoltaic generators with a possible thermal energy byproduct, it applicability is not limited to such systems. The resulting owner-dependent methodology for energy generation system assessment consists of a few equations that can be evaluated without the aid of a high-speed computer.

Chamberlain, R. G.↗

Determination of optimum sunlight concentration level in space for 3-5 cascade solar cells

Current-voltage curves were calculated for each cell in a cascade structure using a solar cell diode equation and superposition. Terms for the light generated current, diffusion current, space charge recombination current and series and shunt resistance are included. Individual current voltage curves are added in series with ohmic resistance losses for the cell interconnects to obtain the cascade cell performance. Temperature was varied with concentration, using several models, and ranged from 55 C at one Sun to between 80 and 200 C at 100 Suns. A variety of series resistance and internal resistances were used. Coefficients of the diffusion and recombination terms are strongly temperature dependent. The study indicates that maximum efficiency (30%) occurs in the 50 to 100X Sun concentration range, provided series resistance is below 0.015 ohm-sq cm and cell temperature is 80 C at 100 Suns.

Curtis, H. B.↗

User's manual for three-dimensional analysis of propeller flow fields

A detailed operating manual is presented for the prop-fan computer code (in addition to supporting programs) recently developed by Kutler, Chaussee, Sorenson, and Pulliam while at the NASA'S Ames Research Center. This code solves the inviscid Euler equations using an implicit numerical procedure developed by Beam and Warming of Ames. A description of the underlying theory, numerical techniques, and boundary conditions with equations, formulas, and methods for the mesh generation program (MGP), three dimensional prop-fan flow field program (3DPFP), and data reduction program (DRP) is provided, together with complete operating instructions. In addition, a programmer's manual is also provided to assist the user interested in modifying the codes. Included in the programmer's manual for each program is a description of the input and output variables, flow charts, program listings, sample input and output data, and operating hints.

Chaussee, D. S.↗

Transonic flow simulation of prop-fan configurations

This paper presents the results of a study that used a three-dimensional transonic analysis method to analyze flow around a wing-mounted prop-fan configuration. The transonic analysis method employs a cell-oriented finite volume approach to solve the full potential equation in conservative form over a numerically generated surface-fitted grid. The propeller slipstream effects are simulated using a linearized transpiration boundary condition. The results of analyses of flow over clean wing/body, wing/body/nacelle, and wing/body nacelle with slipstream are compared to test data.

Samant, S. S.↗

The crack-inclusion interaction problem

The general plane elastostatic problem of interaction between a crack and an inclusion is considered. The Green's functions for a pair of dislocations and a pair of concentrated body forces are used to generate the crack and the inclusion. Integral equations are obtained for a line crack and an elastic line inclusion having an arbitrary relative orientation and size. The nature of stress singularity around the end points of rigid and elastic inclusions is described and three special cases of this intersection problem are studied. The problem is solved for an arbitrary uniform stress state away from the crack-inclusion region. The nonintersecting crack-inclusion problem is considered for various relative size, orientation, and stiffness parameters, and the stress intensity factors at the ends of the inclusion and the crack are calculated. For the crack-inclusion intersection case, special stress intensity factors are defined and are calculated for various values of the parameters defining the relative size and orientation of the crack and the inclusion and the stiffness of the inclusion.

Xue-Hui, L.↗

On the Kelvin-Helmholtz instabilities of supersonic shear layers

Analytical consideration is given to a Kelvin-Helmholtz instability in a finite width supersonic shear layer with linear and sinusoidal velocity profiles in the transition region. An analogy is explored between the pressure perturbation and the bound and scattering wave states of the one-dimensional Schroedinger equation. A numerical model is obtained for generating contour maps of the real and imaginary parts of the perturbation frequency in the (A,B)-plane. A comparison is made between the numerical results and analytical expressions derived for very small Mach numbers. Two unstable regimes are characterized in the (A,B)-plane. The method is concluded useful for both laboratory and astrophysics problems.

Choudhury, S. R.↗

Implicit Total Variation Diminishing (TVD) schemes for steady-state calculations

The novel implicit and unconditionally stable, high resolution Total Variation Diminishing (TVD) scheme whose application to steady state calculations is presently examined is a member of a one-parameter family of implicit, second-order accurate systems developed by Harten (1983) for the computation of weak solutions for one-dimensional hyperbolic conservation laws. The scheme will not generate spurious oscillations for a nonlinear scalar equation and a constant coefficient system. Numerical experiments for a quasi-one-dimensional nozzle problem show that the experimentally determined stability limit correlates exactly with the theoretical stability limit for the nonlinear scalar hyberbolic conservation laws.

Yee, H. C.↗

Mixed models and reduction method for dynamic analysis of anisotropic shells

A time-domain computational procedure is presented for predicting the dynamic response of laminated anisotropic shells. The two key elements of the procedure are: (1) use of mixed finite element models having independent interpolation (shape) functions for stress resultants and generalized displacements for the spatial discretization of the shell, with the stress resultants allowed to be discontinuous at interelement boundaries; and (2) use of a dynamic reduction method, with the global approximation vectors consisting of the static solution and an orthogonal set of Lanczos vectors. The dynamic reduction is accomplished by means of successive application of the finite element method and the classical Rayleigh-Ritz technique. The finite element method is first used to generate the global approximation vectors. Then the Rayleigh-Ritz technique is used to generate a reduced system of ordinary differential equations in the amplitudes of these modes. The temporal integration of the reduced differential equations is performed by using an explicit half-station central difference scheme (Leap-frog method). The effectiveness of the proposed procedure is demonstrated by means of a numerical example and its advantages over reduction methods used with the displacement formulation are discussed.

Noor, A. K.↗

The crack-inclusion interaction problem

The general plane elastostatic problem of interaction between a crack and an inclusion is considered. The Green's functions for a pair of dislocations and a pair of concentrated body forces are used to generate the crack and the inclusion. Integral equations are obtained for a line crack and an elastic line inclusion having an arbitrary relative orientation and size. The nature of stress singularity around the end points of rigid and elastic inclusions is described and three special cases of this intersection problem are studied. The problem is solved for an arbitrary uniform stress state away from the crack-inclusion region. The nonintersecting crack-inclusion problem is considered for various relative size, orientation, and stiffness parameters, and the stress intensity factors at the ends of the inclusion and the crack are calculated. For the crack-inclusion intersection case, special stress intensity factors are defined and are calculated for various values of the parameters defining the relative size and orientation of the crack and the inclusion and the stiffness of the inclusion.

Liu, X.-H.↗

Computer aided analysis and optimization of mechanical system dynamics

The purpose is to outline a computational approach to spatial dynamics of mechanical systems that substantially enlarges the scope of consideration to include flexible bodies, feedback control, hydraulics, and related interdisciplinary effects. Design sensitivity analysis and optimization is the ultimate goal. The approach to computer generation and solution of the system dynamic equations and graphical methods for creating animations as output is outlined.

Haug, E. J.↗

Exploiting loop level parallelism in nonprocedural dataflow programs

Discussed are how loop level parallelism is detected in a nonprocedural dataflow program, and how a procedural program with concurrent loops is scheduled. Also discussed is a program restructuring technique which may be applied to recursive equations so that concurrent loops may be generated for a seemingly iterative computation. A compiler which generates C code for the language described below has been implemented. The scheduling component of the compiler and the restructuring transformation are described.

Gokhale, Maya B.↗

Acoustic propagation using computational fluid dynamics

The propagation characteristics of several helicopter airfoil profiles have been investigated using the transonic small disturbance equation. A test case was performed to generate a moving shock that propagated off the airfoil. Various grids were then examined to determine their ability to accurately capture these propagating shock waves. Finally, the case of airfoil-vortex interactions was thoroughly studied over a wide range of Mach numbers and airfoil shapes with particular emphasis on the transonic regime; this results in a highly conplicated fluctuation of lift, drag, and pitching moment. The calculated acoustic intensity levels, along with the details of the computational flow field, provide new insights into the understanding of transonic airfoil-vortex interactions.

Baeder, J. D.↗

Global diabatic heating during FGGE SOP-1 and SOP-2

With the increase in the observational data provided by FGGE and the use of global circulation models with full physics for the data assimilation, it is now becoming feasible to attempt to estimate globally the atmospheric diabatic heating. The thermodynamic equation in isobaric coordinates and the data generated by the FGGE III-b analysis of the Goddard Laboratory for Atmospheres (GLA) are employed to serve this purpose. The results of the present study generally agree with other previous investigations. However, some important differences are also revealed. (1) The diabatic heating obtained in the tropics in the present study is larger than that obtained elsewhere; (2) the relatively large heating over the mountainous areas shown in other studies does not appear; (3) no significant negative values of diabatic heating are found in the polar regions; and (4) unlike other studies, cooling is noted over parts of Eurasia in the summer.

Chen, Tsing-Chang↗

Nonlinear evolution of longitudinal plasma waves

Long-time nonlinear behavior of single-mode longitudinal plasma waves is studied on the basis of the Vlasov equation with Fokker-Planck collision terms. The resonant layer, trapped island, collisional sublayers, and X-point neighborhoods are analyzed. A nonlinear evolution equation is obtained and the wave-generated current is also evaluated.

Pao, Young-Ping↗