Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “flow lines”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Ice Nucleating Particles (INP) Raw Data

The ice nucleation spectrometer (INS) is an offline analytical measurement system used to process filter samples for freezing temperature spectra of immersion-mode ice-nucleating particle (INP) number concentrations. It is almost identical to the Colorado State University (CSU) ice spectrometer design. Filter samples are collected at ARM facilities routinely and during intensive operational periods, and on the ARM tethered balloon system operated by Sandia National Laboratories, then processed on the INS at CSU. This filter log contains the detailed metadata at all ARM sites where INP filter sample collection has occurred or is currently ongoing. Metadata include start and end times, vacuum line pressures and temperatures, and flow rates; total accumulated flow through each filter; and notes on collection issues or weather conditions. Users can also keep up to date with the status of filter and data processing, even before data are available on ARM's Data Discovery. Users can contact INP mentors Jessie Creamean or Thomas Hill with any questions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

tbsinp (00)

The ice nucleation spectrometer (INS) is an offline analytical measurement system used to process filter samples for freezing temperature spectra of immersion-mode ice-nucleating particle (INP) number concentrations. It is almost identical to the Colorado State University (CSU) ice spectrometer design. The INS-AIR is specific to filter samples collected on aerial platforms, such as the DOE ARM tethered balloon system (TBS) operated by Sandia National Laboratories, using miniaturized aerosol filter samplers. Users are referred to the INS instrument handbook for INS-AIR sampler details. INS-AIR filter samples are collected during intensive operational periods at various ARM sites and then processed on the INS at CSU. This filter log contains the detailed metadata at all ARM sites where INP filter sample collection has occurred or is currently ongoing, including both ground-based routine INP sampling (INS) and TBS INP sampling (INS-AIR). Metadata include start and end times, vacuum line pressures and temperatures, and flow rates; total accumulated flow through each filter; and notes on collection issues or weather conditions. Users can also keep up to date with the status of filter and data processing, even before data are available on ARM’s Data Discovery. Users can contact INP mentors Jessie Creamean or Thomas Hill with any questions.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1972

Computer program for quasi-three-dimensional calculation of surface velocities and choking flow for turbomachine blade rows

Computer program, CHANEL, can obtain quasi-three-dimensional solutions in any well-guided channel. Conditions that can be handled by program that could not be handled previously are nonuniform inlet temperature, pressure, prewhirl, nonaxial flow where meridional flow angle, meridional stream-line curvature, and radius can vary as desired from hub to tip.

Katsanis, T.↗
NASA NTRS1972

Hydrogen density measurements using an open-ended microwave cavity.

The density measurement of liquid hydrogen and two-phase mixtures of liquid and gaseous hydrogen is considered. This paper describes a complete prototype system that uses an open-ended microwave cavity for making dynamic density measurements of flowing hydrogen in a transfer line. The theory of operation along with test results for both the single- and two-phase cases are presented and discussed.

Wenger, N. C.↗
NASA NTRS1973

Research on unsteady transonic flow theory

A two-dimensional theory is considered for the unsteady flow disturbances caused by aeroelastic deformations of a thick wing at high subsonic freestream Mach numbers, having a single, internally embedded supercritical (locally supersonic) steady flow region adjacent to the low pressure side of the wing. The theory develops a matrix of unsteady aerodynamic influence coefficients (AICs) suitable as a strip theory for aeroelastic analysis of large aspect ratio thick wings of moderate sweep, typical of a wide class of current and future aircraft. The theory derives the linearized unsteady flow solutions separately for both the subcritical and supercritical regions. These solutions are coupled together to give the requisite (wing pressure-downwash) AICs by the intermediate step of defining flow disturbances on the sonic line, and at the shock wave; these intermediate quantities are then algebraically eliminated by expressing them in terms of the wing surface downwash.

Revell, J. D.↗
NASA NTRS1975

Scatter-free collimated convection and cosmic-ray transport at 1 AU

Observations of solar cosmic rays between 0.1 MeV and 1 GeV are more consistent with scatter-free than diffusive propagation near 1 AU. Since these particles also are constrained to interplanetary magnetic field lines, the parallel and transverse flow are decoupled by collimated convection. Local propagation is therefore more appropriately described by Liouville's equation, and transport properties can be examined from the exact zeroeth and first moments of the equation averaged over all directions in momentum space. Observational results which may be explained directly without invoking local scattering include the decay of solar flare events as well as the radial gradient, diurnal and semidiurnal variation of galactic cosmic rays.

Roelof, E. C.↗
NASA NTRS1976

The pressure and energy balance of the cool corona over sunspots

The 22 largest sunspots observed with the Skylab SO55 spectrometer are studied for a relation between their EUV radiation and their umbral size or magnetic classification. The ultimate goal is to determine why the coronal plasma is so cool over a sunspot and how this cool plasma manages to support itself against gravity. Based on the time behavior of the EUV emission, a steady-state model is developed for the pressure and energy balance of the cool coronal-plasma loops over the spots. Analysis of the temperature structure in a typical loop indicates that the loop is exceedingly well insulated from the outside corona, that its energy balance is determined purely by internal heating and cooling processes, and that a heat input of about 0.0001 erg/cu cm per sec is required along the full length of the loop. It is proposed that: (1) coronal material flows steadily across the field lines at the tops of the loops and falls downward along both sides under gravity; (2) the corona is heated by mechanical-energy transport across the very thin transition region immediately over network-cell interiors; and (3) strong magnetic fields tend to inhibit mechanical-energy dissipation in the corona.

Foukal, P. V.↗
NASA NTRS1980

On the physics of a long decay X-ray event

The paper discusses the long decay X-ray event which appeared as an expanding loop system on the solar limb on 13-14 Aug. 1973 which was also observed temporally and spectrally. A one-dimensional hydrodynamic study was undertaken to investigate increasing and decreasing phases of the event; it was shown that the inferred temperature gradients along the loops during the heating phase are consistent with unrestricted dynamic and conductive flows along the magnetic field lines. It was concluded that it cannot be definitely stated that enhanced emission at the tops of the loops is due to pressure gradients along the field lines; also, the large emission measure variations in the 10 to the 5th to 10 to the 6th K plasma during the event's decline may be due to the temperature dependence of radiative decay within a multiloop configuration.

Krall, K. R.↗
NASA NTRS1980

Mass transfer between binary stars

The transfer of mass from one component of a binary system to another by mass ejection is analyzed through a stellar wind mechanism, using a model which integrates the equations of motion, including the energy equation, with an initial static atmosphere and various temperature fluctuations imposed at the base of the star's corona. The model is applied to several situations and the energy flow is calculated along the line of centers between the two binary components, in the rotating frame of the system, thereby incorporating the centrifugal force. It is shown that relatively small disturbances in the lower chromosphere or photosphere can produce mass loss through a stellar wind mechanism, due to the amplification of the disturbance propagating into the thinner atmosphere. Since there are many possible sources of the disturbance, the model can be used to explain many mass ejection phenomena.

Modisette, J. L.↗
NASA NTRS1981

ISEE 1 observations of thermal plasma in the vicinity of the plasmasphere during periods of quieting magnetic activity

An investigation of thermal plasma behavior in the vicinity of the plasmasphere during periods of quieting magnetic activity was conducted by combining thermal ion observations made with the plasma composition experiment on ISEE 1 with plasma density profiles obtained from plasma frequency measurements made with the same satellite's plasma wave experiment. During periods in which the magnetic activity quiets, the two regions characterized by H(+):He(+):O(+) (isotropic) and H(+):O(+):He(+) (field-aligned) ion species distributions (in order of dominance) are separated by a new region in which low-energy H(+) and He(+) are found flowing along the magnetic field lines. At other times, following quieting magnetic activity, distributions having peak fluxes at 90 deg pitch angle are observed in this region.

Horwitz, J. L.↗
NASA NTRS1984

Radially-Graduated Turbine-Temperature Profile

Proposed scheme to change temperature distribution in gas-turbine flame increases radially instead of remaining spatially uniform offers important advantages. Radially increasing temperature allows higher mean gas temperature, greater power output, higher rotational speed and longer life for blades. Principle suitable for axial-flow gas turbine directly in line with cylindrical combustor. Included in category many rocket, aircraft, stationary, and shipboard turbines.

Wagner, W. R.↗
NASA NTRS1982

VLBI observations of the nucleus and jet of M87

The nucleus and jet of M87 was mapped with an eight-station very long baseline interferometric array at 18 cm wavelength with high dynamic range. It was found that the nucleus of M87 consists of a core-jet structure with a peak brightness temperature greater than 10 to the 10th K. Emission is shown to extend for more than 50 milli-arcsec with a brightness temperature exceeding 10 to the 8th K along a position angle of 288 degrees, which precisely matches the position angle of the 20'' radio/optical/X-ray jet. In addition, the nucleus contains a significant structure of lower brightness at approximately the same position angle, although no counterjet is observed. By invoking relativistic beaming in order to enhance the jet and diminish the counterjet, it is shown that the jet must be aligned within about 60 degrees to our line of sight, and its flow velocity must exceed about 60% of the speed of light. The knots embedded in the 20'' jet contain no bright compact structures, and the sizes of the innermost knot (knot D) is between 0.1-0.3''.

Reid, M. J.↗
NASA NTRS1984

Analysis and calculation of macrosegregation in a casting ingot, exhibits C and E

A computer model which describes the solidification of a binary metal alloy in an insulated rectangular mold with a temperature gradient is presented. A numerical technique, applicable to a broad class of moving boundary problems, was implemented therein. The solidification model described is used to calculate the macrosegregation within the solidified casting by coupling the equations for liquid flow in the solid/liquid or mushy zone with the energy equation for heat flow throughout the ingot and thermal convection in the bulk liquid portion. The rate of development of the solid can be automatically calculated by the model. Numerical analysis of such solidification parameters as enthalpy and boundary layer flow is displayed. On-line user interface and software documentation are presented.

Poirier, D. R.↗
NASA NTRS1985

Dilution jet mixing program, phase 3

The main objectives for the NASA Jet Mixing Phase 3 program were: extension of the data base on the mixing of single sided rows of jets in a confined cross flow to discrete slots, including streamlined, bluff, and angled injections; quantification of the effects of geometrical and flow parameters on penetration and mixing of multiple rows of jets into a confined flow; investigation of in-line, staggered, and dissimilar hole configurations; and development of empirical correlations for predicting temperature distributions for discrete slots and multiple rows of dilution holes.

Srinivasan, R.↗