Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electron microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Revealing High-Temperature Reduction Dynamics of High-Entropy Alloy Nanoparticles via In Situ Transmission Electron Microscopy

Understanding the behavior of high-entropy alloy (HEA) materials under hydrogen (H 2 ) environment is of utmost importance for their promising applications in structural materials, catalysis, and energy-related reactions. Herein, the reduction behavior of oxidized FeCoNiCuPt HEA nanoparticles (NPs) in atmospheric pressure H-2 environment was investigated by in situ gas-cell transmission electron microscopy (TEM). The reduction reaction front was maintained at the external surface of the oxide. During reduction, the oxide layer expanded and transformed into porous structures where oxidized Cu was fully reduced to Cu NPs while Fe, Co, and Ni remained in the oxidized form. In situ chemical analysis showed that the expansion of the oxide layer resulted from the outward diffusion flux of all transition metals (Fe, Co, Ni, Cu). Revealing the H-2 reduction behavior of HEA NPs facilitates the development of advanced multicomponent alloys for applications targeting H 2 formation and storage, catalytic hydrogenation, and corrosion removal.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Transmission Electron Microscopy Study on the Effect of Thermal and Electrical Stimuli on Ge2Te3 Based Memristor Devices

Memristor devices fabricated using the chalcogenide Ge 2 Te 3 phase change thin films in a metal-insulator-metal structure are characterized using thermal and electrical stimuli in this study. Once the thermal and electrical stimuli are applied, cross-sectional transmission electron microscopy (TEM) and X-ray energy-dispersive spectroscopy (XEDS) analyses are performed to determine structural and compositional changes in the devices. Electrical measurements on these devices showed a need for increasing compliance current between cycles to initiate switching from low resistance state (LRS) to high resistance state (HRS). The measured resistance in HRS also exhibited a steady decrease with increase in the compliance current. High resolution TEM studies on devices in HRS showed the presence of residual crystalline phase at the top-electrode/dielectric interface, which may explain the observed dependence on compliance current. XEDS study revealed diffusion related processes at dielectric-electrode interface characterized, by the separation of Ge 2 Te 3 into Ge- and Te- enriched interfacial layers. This was also accompanied by spikes in O level at these regions. Furthermore, in-situ heating experiments on as-grown thin films revealed a deleterious effect of Ti adhesive layer, wherein the in-diffusion of Ti leads to further degradation of the dielectric layer. This experimental physics-based study shows that the large HRS/LRS ratio below the current compliance limit of 1 mA and the ability to control the HRS and LRS by varying the compliance current are attractive for memristor and neuromorphic computing applications.

Shallcross, Austin↗

GRAIN BOUNDARY CHARACTERIZATION OF ALLOY 600 PRIOR TO AND AFTER CORROSION BY ATOM PROBE TOMOGRAPHY AND TRANSMISSION ELECTRON MICROSCOPY

Grain boundary composition can play a critical role in the susceptibility of a material to intergranular (IG) corrosion and stress corrosion cracking (SCC). Detailed analytical observations of grain boundaries have been obtained in nickel-base alloy 600 prior to and after corrosion in simulated PWR primary water environments with atom probe tomography (APT) and analytical transmission electron microscopy (ATEM). Several examples are shown to identify key grain boundary segregants and the effect of proximity to IG Cr carbides on interfacial compositions prior to exposure in high-temperature PWR primary water. Examples are also given to describe the effect of corrosion on grain boundaries. Alloy 600 exhibits significant IG attack consisting primarily of nanocrystalline MO-phase oxides and limited Cr2O3 precipitates. The grain boundary ahead of the IG oxidation front exhibits depletion of Cr and other oxidizing species. No evidence for solid-state grain boundary ingress of oxygen has been discovered.

Schreiber, Daniel K.↗

Effect of pore penetration on transport through supported membranes studied by electron microscopy and pervaporation

It has long been recognized that the performance of supported membranes comprising a thin, selective layer and a microporous support layer, is affected by penetration of the selective layer into the porous support. We have attempted to shed light on this phenomenon using a combination of pervaporation experiments and hard angle dark-field scanning transmission electron microscopy (HAADF-STEM). We use a nanophase-separated polystyrene-b-polydimethylsiloxane-b-polystyrene (SDS) as the selective layer and microporous polytetrafluoroethylene (PTFE) as the support layer. Effective permeabilities of butanol and water were measured as a function of selective layer thickness using a dilute butanol/water mixture as the feed in pervaporation. We were able to estimate the pore penetration layer thickness by comparing experiments with model calculations. We were also able to directly observe the pore penetration by HAADF-STEM. The choice in using a nanophase-separated block copolymer as the selective layer enabled identification of the regions of pore penetration. In conclusion, the pore penetration layer thickness obtained from the HAADF-STEM micrographs corresponded well with estimates based on pervaporation.

36 MATERIALS SCIENCE↗

Transmission Electron Microscopy Investigation of Krypton Bubbles in Polycrystalline CeO2

To gain an understanding of gas bubble transport in oxide nuclear fuel, this paper uses polycrystalline CeO2, composed of both nanograins and micrograins, as a surrogate material for UO2. The CeO2 was implanted with 150-keV Kr ions up to a dose of 1 x 1016 ions/cm2 at 600 degrees C. Transmission electron microscopy characterizations of small Kr bubbles in nanograin and micrograin regions were compared. The grain boundary acted as an efficient defect sink, as evidenced by smaller bubbles and a lower bubble density in the nanograin region as compared to the micrograin region.

99 GENERAL AND MISCELLANEOUS↗

Understanding Complex Magnetic Spin Textures with Simulation-Assisted Lorentz Transmission Electron Microscopy

There is an increased interest in topologically nontrivial magnetic spin textures such as skyrmions and chiral domain-wall solitons, both from a point of fundamental physics understanding as well as potential technological interest in low-power memory applications. In order to control their behavior, it is necessary to understand their complex spin texture at the nanoscale. Lorentz transmission electron microscopy (LTEM) is a suitable technique for studying these systems due to its high spatial resolution and capability to simultaneously characterize magnetic texture and microstructure. In this work, we present the application of PyLorentz, an open-source software suite that we have developed, for quantitative image analysis of Neel-type skyrmions in thin-film heterostructures. PyLorentz enhances LTEM capabilities by enabling reconstruction of magnetic induction maps from experimental images, as well as simulating LTEM images using micromagnetic simulation data. We demonstrate this for simulated Neel skyrmions as well as experimental data from [Pt/Co/W] multilayer heterostructures. Finally, we also show how simulation-assisted LTEM analysis is crucial for understanding these complex magnetic spin textures, in which the reconstructed magnetic induction map (seen in the LTEM images) differs significantly from the magnetization configuration.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of the Anisotropy of Y-Ba-Cu-O Thin Films With Photoemission Electron Microscopy

Understanding the anisotropy in the electrical properties of YBa2Cu3O7-δ (YBCO) is important for understanding the fundamental mechanism of superconductivity in unconventional superconductors. Additionally it is also essential for achieving uniform and controllable critical currents and resistances in YBCO Josephson junctions. Here, this study correlates work function measurements of different intrinsic regions on YBCO thin films, obtained through PhotoEmission Electron Microscopy (PEEM), with in plane tunneling data and helium ion imaging. YBCO thin films, 40 nm in thickness, were selectively irradiated with 300 keV helium using a Pelletron to investigate the effects of irradiation compared to unirradiated regions. Post-irradiation PEEM images revealed distinct contrasts between irradiated and non-irradiated regions, suggesting a metal-to-insulator transition. In non-irradiated areas, a domain pattern was detected, showing a 25 meV difference in work function, attributed to CuO and BaO rich surface regions. A similar domain structure was observed using high-resolution helium ion imaging; however, the helium ion beam can damage the YBCO, making PEEM a valuable non-destructive alternative. This work highlights the correlation between PEEM measurements and in-plane tunneling properties of YBCO, providing insights into material orientation and its impact on Josephson junction performance. Furthermore, it offers a non-destructive approach to understanding the anisotropy of cuprate materials, its superconducting properties, and the factors affecting Josephson junction performance.

Qu, Rochelle Y. [Univ. of California, Riverside, C↗

Correlated transmission electron microscopy and atom probe tomography characterization of ion irradiated Ni-based alloy Hastelloy N

Ion irradiation of Hastelloy N was conducted to better characterize the effects of irradiation on Hastelloy N using modern tools compared to studies done in the 1950s. The 2 MeV Ni + ion irradiation at 600 °C of Hastelloy N has been investigated using atom probe tomography, transmission electron microscopy and energy dispersive spectroscopy. Irradiation is found to promote formation of nanoscale M 2 C carbides over the thermodynamically favored M 6 C. Segregation of Si to dislocation loops and grain boundaries was also evident and may have assisted in formation of M 2 C. These microstructural changes result in a 20 % hardness increase caused by irradiation alone. These observations are useful in the design of new materials better suited for the harsh environment of a molten salt reactor.

Atom probe tomography↗

Dynamics of Nanoscale Dendrite Formation in Solution Growth Revealed Through in Situ Liquid Cell Electron Microscopy

Formation mechanisms of dendrite structures have been extensively explored theoretically, and many theoretical predictions have been validated for micro- or macroscale dendrites. However, it is challenging to determine whether classical dendrite growth theories are applicable at the nanoscale due to the lack of detailed information on the nanodendrite growth dynamics. Here, we study iron oxide nanodendrite formation using liquid cell transmission electron microscopy (TEM). We observe "seaweed"-like iron oxide nanodendrites growing predominantly in two dimensions on the membrane of a liquid cell. By tracking the trajectories of their morphology development with high spatial and temporal resolution, it is possible to explore the relationship between the tip curvature and growth rate, tip splitting mechanisms, and the effects of precursor diffusion and depletion on the morphology evolution. We show that the growth of iron oxide nanodendrites is remarkably consistent with the existing theoretical predictions on dendritic morphology evolution during growth, despite occurring at the nanoscale.

36 MATERIALS SCIENCE↗

Observation of stable Néel skyrmions in cobalt/palladium multilayers with Lorentz transmission electron microscopy

Néel skyrmions are of high interest due to their potential applications in a variety of spintronic devices, currently accessible in ultrathin heavy metal/ferromagnetic bilayers and multilayers with a strong Dzyaloshinskii–Moriya interaction. Here in this paper we report on the direct imaging of chiral spin structures including skyrmions in an exchange-coupled cobalt/palladium multilayer at room temperature with Lorentz transmission electron microscopy, a high-resolution technique previously suggested to exhibit no Néel skyrmion contrast. Phase retrieval methods allow us to map the internal spin structure of the skyrmion core, identifying a 25 nm central region of uniform magnetization followed by a larger region characterized by rotation from in- to out-of-plane. The formation and resolution of the internal spin structure of room temperature skyrmions without a stabilizing out-of-plane field in thick magnetic multilayers opens up a new set of tools and materials to study the physics and device applications associated with chiral ordering and skyrmions.

36 MATERIALS SCIENCE↗

Measurement of dihedral angles by scanning electron microscopy.

The extension of Hoover's (1971) technique to the case of dihedral-angle measurement is described. Dihedral angles are often determined by interferometry on thermally grooved grain boundaries to obtain information on relative interfacial energies. In the technique considered the measured angles approach the true angles as the tilt angle approaches 90 deg. It is pointed out that the scanning electron microscopy method provides a means of seeing the real root of a groove at a lateral magnification which is higher than that obtainable with interferometry.

Achutaramayya, G.↗

(abstract) Transmission Electron Microscopy of Al(sub x)Ga(sub 1-x)N/SiC Multilayer Structures Grown on Sapphire Substrates

The potential of wide-band-gap III-V nitrides as ultraviolet sensors and light emitters has prompted an increasing amount of work recently, including the fabrication of the first UV sensors from as-deposited single crystal GaN. We have used high resolution transmission electron microscopy (TEM) to study the microstructure of two novel developments of wide-band-gap III-V nitrides: the growth of ultra-short period GaN/AlN superlattices; and the incorporation of SiC layers into Al(sub x)Ga(sub 1-x)N structures. By varying the relative periods in a GaN/AlN superlattice, the band gap of the composite can be tailored to lie between the elemental values of 365 nm for GaN and 200 nm for AlN. The group IV semiconductor, SiC, has a wide band-gap and has a close lattice match (less than 3 %) to Al(sub x)Ga(sub 1-x)N for growth on the basal plane. Demonstration of epitaxial growth for Al(sub x)Ga(sub 1-x)N/SiC multilayers would introduce a wide band-gap analog to the already existing family of III-V and Si(sub 1-x)Ge(sub x) heteroepitaxial growth systems. Although good quality growth of GaN on SiC substrates has been demonstrated, Al(sub x)Ga(sub 1-x)N/SiC multilayer structures have never been grown and the interfacial structure is unknown.

GaN AlN GaN/AlN↗

New approach to electron microscopy imaging of gel nanocomposites in situ

We present that characterization of Au-nanocomposites is routinely done with scattering techniques where the structure and ordering of nanoparticles can be analyzed. Imaging of Poloxamer gel-based Au-nanocomposites is usually limited to cryo-TEM imaging of cryo-microtomed thin sections of the specimen. While this approach is applicable for imaging of the individual nanoparticles and gauging their size distribution, it requires altering the state of the specimen and is prone to artifacts associated with preparation protocols. Use of Scanning Transmission Electron Microscopy (S/TEM) with fluid cell in situ provides an opportunity to analysis of these complex materials in their hydrated state with nanometer resolution, yet dispensing dense gel-based samples onto electron-transparent substrates remains challenging. Here, we show that Poloxamer gel-based Au nanocomposites exhibiting thermoreversible behavior can be imaged in a fully hydrated state using a commercially available fluid cell holder, and we describe a specimen preparation method for depositing femtoliter amounts of gel-based nanocomposites directly onto the 50 nm-thick SiN window membranes. Ultimately, fluid cell S/TEM in situ imaging approach offers a pathway to visualization of individual nanoparticles within a thick gel media while maintaining the hydrated state of the carrier polymeric matrix.

36 MATERIALS SCIENCE↗

Electron microscopy: Phase transition singled out

One of the fundamental challenges within nanotechnology is to understand and control how nanoscale properties are initiated, evolve, and eventually terminate as a system moves from an individual nanostructure towards the meso- and macro-scale ensembles that are used in most applications. The ability to directly observe individual nanostructures and characterize their structure and composition has long been within the purview of transmission electron microscopy (TEM). The almost ubiquitous application of spherical aberration correction in TEM and in scanning-TEM (STEM) that has occurred over the last 10 years, now means it is possible to routinely characterize such nanostructures with both atomic resolution and sensitivity [1,2]. The development of temporal resolution in the TEM and the ability to study fast dynamics, on the other hand, has only recently come to the forefront of instrumentation development and is currently defined by two different approaches in the use of photoemission sources: the single shot s-ns dynamic TEM (DTEM) [3] and the stroboscopic ps-fs 4-D EM [4]. In the case of the DTEM, the goal is to observe the longer timescale irreversible structural changes that occur during nucleation and growth phenomena (here the single shot approach means there are enough electrons in a single pulsed beam to form a complete image). The 4-D EM focuses on a stroboscopic approach with the goal of studying very rapid reversible effects that occur during phase transitions (here an image is composed of thousands of pump-probe events each occurring with exactly the same time signature, with an individual pulse containing only a few electrons).

36 MATERIALS SCIENCE↗

In-situ electron microscopy mapping of an order-disorder transition in a superionic conductor

Solid-solid phase transitions are processes ripe for the discovery of correlated atomic motion in crystals. Here, we monitor an order-disorder transition in real-time in nanoparticles of the super-ionic solid, Cu 2-x Se. The use of in-situ high-resolution transmission electron microscopy allows the spatiotemporal evolution of the phase transition within a single nanoparticle to be monitored at the atomic level. The high spatial resolution reveals that cation disorder is nucleated at low co-ordination, high energy sites of the nanoparticle where cationic vacancy layers intersect with surface facets. Time-dependent evolution of the reciprocal lattice of individual nanoparticles shows that the initiation of cation disorder is accompanied by a ~3% compression of the anionic lattice, establishing a correlation between these two structural features of the lattice. The spatiotemporal insights gained here advance understanding of order-disorder transitions, ionic structure and transport, and the role of nanoparticle surfaces in phase transitions.

36 MATERIALS SCIENCE↗

Transmission Electron Microscopy Investigation of Krypton Bubbles in Polycrystalline CeO2

To gain an understanding of gas bubble transport in oxide nuclear fuel, this paper uses polycrystalline CeO 2 , composed of both nanograins and micrograins, as a surrogate material for UO 2 . The CeO 2 was implanted with 150-keV Kr ions up to a dose of 1 × 10 16 ions/cm 2 at 600°C. Transmission electron microscopy characterizations of small Kr bubbles in nanograin and micrograin regions were compared. The grain boundary acted as an efficient defect sink, as evidenced by smaller bubbles and a lower bubble density in the nanograin region as compared to the micrograin region.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Grazing incidence X-ray diffraction and transmission electron microscopy studies on the oxide formation of molybdenum in a water vapor environment

In this study, to evaluate the feasibility of molybdenum as light water reactor nuclear fuel cladding, the oxidation behavior was tested in water vapor at elevated temperatures. We present experimental results on the oxidation and volatilization of molybdenum using various characterization techniques including grazing incidence X-ray diffraction and transmission electron microscopy. After oxidation testing in water vapor at 600 °C, experiment results show the formation of both MoO 3 and MoO 2 . Lastly, with the increasing temperature, MoO 2 is the final oxidation product between 800 and 1200°C, and MoO 3 is volatile at these temperatures.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗