Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electron density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Parametrization of the two-electron reduced density matrix for its direct calculation without the many-electron wave function: Generalizations and applications

An improved parametrization of the two-electron reduced density matrix (2-RDM) [D. A. Mazziotti, Phys. Rev. Lett. 101, 253002 (2008)] was recently shown to yield energies and properties that are markedly better than those calculated by traditional ab initio methods of similar computational scaling. In this paper a family of such energy functionals, generalizing the ones obtained previously, is derived through the use of (i) p-particle contraction relations based on the contraction of the cumulant expansions of p-particle RDMs and (ii) Cauchy-Schwarz relations that arise from an important set of N-representability constraints known as the two-positivity conditions. The 2-RDMs are explicitly parameterized in terms of the first-order part of the cumulant 2-RDM and, for the inclusion of single excitations, a second-order part of the 1-RDM. In contrast to earlier formulations based on the coefficients from configuration interaction with single and double excitations (CISD), the cumulant-based parametric 2-RDM methods, from the properties of cumulants, are rigorously size extensive. We also show that writing the energy functionals in terms of correlated 1-RDMs and cumulant 2-RDMs reduces the computational cost of the parametric 2-RDM methods to that of CISD. Applications are made to ground-state energies of several molecules, equilibrium bond distances, and frequencies of HF, F{sub 2}, and CO, the relative energy of the cis and trans isomers of HO{sub 3}{sup -}, and the HCN-HNC isomerization reaction. For bond breaking in hydrogen fluoride the improved and more efficient parametric 2-RDM methods yield energies with similar accuracies at both equilibrium and nonequilibrium geometries in 6-31G** and polarized valence quadruple-{zeta} basis sets. Computed 2-RDMs very nearly satisfy well-known N-representability conditions.

74 ATOMIC AND MOLECULAR PHYSICS↗

Theoretical investigation of the vibrational properties of BeH{sub 2} and Li{sub 2}BeH{sub 4}.

First-principles calculations of BeH{sub 2} and Li{sub 2}BeH{sub 4} were performed and compared to inelastic neutron scattering. The crystal structure (P2{sub 1}/c space group) of Li{sub 2}BeH{sub 4} contains BeH{sub 4} tetrahedral units similar to those in {alpha}-BeH{sub 2} (Ibam space group) but separated from each other by Li atoms. Calculated vibrational density of states revealed the origin of the observed major vibrational modes. Charge-density maps and electronic density of states indicate interplay between covalent and ionic bondings in Li{sub 2}BeH{sub 4} and provide a better understanding of the nature of the bonding in these materials.

36 MATERIALS SCIENCE↗

Plasma properties of RF magnetron sputtering system using Zn target

In the present work, we investigate the fundamental properties of magnetron sputtering plasma using Zn target and its deposited Zn thin film. The magnetron sputtering plasma was produced using radio frequency (RF) power supply and Argon (Ar) as ambient gas. A Langmuir probe was used to collect the current from the plasma and from the current intensity, we calculate the electron density and electron temperature. The properties of Zn sputtering plasma at various discharge conditions were studied. At the RF power ranging from 20 to 100 W and gas pressure 5 mTorr, we found that the electron temperature was almost unchanged between 2-2.5 eV. On the other hand, the electron temperature increased drastically from 6 Multiplication-Sign 10{sup 9} to 1 Multiplication-Sign 10{sup 10}cm{sup -3} when the discharge gas pressure increased from 5 to 10 mTorr. The electron microscope images show that the grain size of Zn thin film increase when the discharge power is increased. This may be due to the enhancement of plasma density and sputtered Zn density.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Incidence of an electron layer on an electrically insulated body with an unsteady self-consistent positive charge

Dynamics of an electron layer incident on the surface of an electrically insulated conducting body with an unsteady self-consistent positive charge is investigated. At the initial instant, the electron velocity is directed toward the body and the electron layer is not adjacent to the body surface. One-dimensional plane, cylindrical, and spherical electron motions in vacuum and against the background of motionless ions and neutral particles are considered. Exact analytical solutions to the set of nonlinear plasma hydrodynamics equations with absorbing boundary conditions for electrons are obtained. The spatial and time dependences of the electric field, electron density, and electron velocity are found. The time evolution of the surface charge density is determined.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spectroscopic Modeling of Single Element Plasma

A strategy for spectroscopic analysis of single element plasmas is through modeling. An experimental investigation or generation of a specified emission spectrum can be attempted based on the modeling results which are currently under investigating by many researchers in the world. In the emission spectroscopy, the K-shell emission is more interesting than emissions from other shells due to their unique EUV and SXR frequencies that can be applied in various scientific and industrial applications. Population information of our model is based on a steady state kinetic code which is calculated for a given electron temperature and an estimated electron density. Thus for each single element plasma it needs large amounts of experimental or theoretical database. Depending on the parameter of the plasma, theories based on local thermodynamic equilibrium (LTE) and non-LTE are considered. In the non-LTE case, the Corona model is used and the total absolute number densities are calculated based on the ion densities that are related to the electron density corresponds to the mean charge of the ions. The spectra generated by the model can then be compared with spectroscopic data obtained experimentally.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The effect of electron beam pitch angle and density gradient on solar type III radio bursts

1.5D particle-in-cell simulations of a hot, low density electron beam injected into magnetized, maxwellian plasma were used to further explore the alternative non-gyrotropic beam driven electromagnetic (EM) emission mechanism, first studied in Tsiklauri, Phys. Plasmas 18, 052903 (2011). Variation of beam injection angle and background density gradient showed that the emission process is caused by the perpendicular component of the beam injection current, whereas the parallel component only produces Langmuir waves, which play no role in the generation of EM waves in our mechanism. Particular emphasis was put on the case, where the beam is injected perpendicularly to the background magnetic field, as this turned off any electrostatic wave generation along the field and left a purely electromagnetic signal in the perpendicular components. The simulations establish the following key findings: (i) Initially, waves at a few {omega}{sub ce}/{gamma} are excited, mode converted and emitted at Almost-Equal-To {omega}{sub pe} (ii) The emission intensity along the beam axis is proportional to the respective component of the kinetic energy of the beam; (iii) The frequency of the escaping EM emission is independent of the injection angle; (iv) A stronger background density gradient causes earlier emission; (v) The beam electron distribution function in phase space shows harmonic oscillation in the perpendicular components at the relativistic gyrofrequency; (vi) The requirement for cyclotron maser emission, ({partial_derivative}f/{partial_derivative}v{sub Up-Tack })>0, is fulfilled; (vii) The degree of linear polarization of the emission is strongly dependent on the beam injection angle; (viii) The generated electromagnetic emission is left-hand elliptically polarized as the pitch angle tends to 90 Degree-Sign ; and (ix) The generated electromagnetic energy is of the order of 0.1% of the initial beam kinetic energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The role of residual charges in the repeatability of the dynamics of atmospheric pressure room temperature plasma plume

To better understand the role of residual electrons in the repeatability of an atmospheric pressure plasma plume, the characteristics of a helium plasma jet from the 1st, 2nd,… until the repeatable discharge pulse are investigated for the first time. It's found that the longest plasma plume is achieved in the 1st discharge pulse. The length of the plasma plume becomes shorter and shorter and reaches a constant value in the 3rd discharge pulse and keeps the same for the following pulses. The dynamics of the 1st discharge pulse show that the plasma bullet appears random in nature. Two photomultiplier tubes are used to distinguish the two potential factors that could result in the stochastic dynamics of the plasma bullet, i.e., stochastic ignition of the plasma and the stochastic propagation velocity. The results show that the stochastic propagation velocity occurs only in the 1st and the 2nd discharge pulses, while the stochastic ignition of the plasma presents until the 100th pulse. The dynamics of the plasma propagation become repeatable after about 100 pulses. Detail analysis shows that the repeatability of plasma bullet is due to the residual electrons density. The residual electron density of 10{sup 9 }cm{sup −3} or higher is needed for repeatable discharges mode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electronic properties of bimetallic metal–organic frameworks (MOFs): Tailoring the density of electronic states through MOF modularity

The development of porous well-defined hybrid materials (e.g., metal-organic frameworks or MOFs) will add a new dimension to a wide number of applications ranging from supercapacitors and electrodes to 'smart' membranes and thermoelectrics. From this perspective, the understanding and tailoring of the electronic properties of MOFs are key fundamental challenges that could unlock the full potential of these materials. In this work, we focused on the fundamental insights responsible for the electronic properties of three distinct classes of bimetallic systems, M x-y M' y -MOFs, M x M' y - MOFs, and M x (ligand-M' y )-MOFs, in which the second metal (M') incorporation occurs through (i) metal (M) replacement in the framework nodes (type I), (ii) metal node extension (type II), and (iii) metal coordination to the organic ligand (type III), respectively. We employed microwave conductivity, X-ray photoelectron spectroscopy, diffuse reflectance spectroscopy, powder X-ray diffraction, inductively coupled plasma atomic emission spectroscopy, pressed-pellet conductivity, and theoretical modeling to shed light on the key factors responsible for the tunability of MOF electronic structures. Experimental prescreening of MOFs was performed based on changes in the density of electronic states near the Fermi edge, which was used as a starting point for further selection of suitable MOFs. As a result, we demonstrated that the tailoring of MOF electronic properties could be performed as a function of metal node engineering, framework topology, and/or the presence of unsaturated metal sites while preserving framework porosity and structural integrity. Finally, these studies unveil the possible pathways for transforming the electronic properties of MOFs from insulating to semiconducting, as well as provide a blueprint for the development of hybrid porous materials with desirable electronic structures.

36 MATERIALS SCIENCE↗

Multicomponent density functional theory embedding formulation

Multicomponent density functional theory (DFT) methods have been developed to treat two types of particles, such as electrons and nuclei, quantum mechanically at the same level. In the nuclear-electronic orbital (NEO) approach, all electrons and select nuclei, typically key protons, are treated quantum mechanically. For multicomponent DFT methods developed within the NEO framework, electron-proton correlation functionals based on explicitly correlated wavefunctions have been designed and used in conjunction with well-established electronic exchange-correlation functionals. Herein a general theory for multicomponent embedded DFT is developed to enable the accurate treatment of larger systems. In the general theory, the total electronic density is separated into two subsystem densities, denoted as regular and special, and different electron-proton correlation functionals are used for these two electronic densities. In the specific implementation, the special electron density is defined in terms of spatially localized Kohn-Sham electronic orbitals, and electron-proton correlation is included only for the special electron density. The electron-proton correlation functional depends on only the special electron density and the proton density, whereas the electronic exchange-correlation functional depends on the total electronic density. This scheme includes the essential electron-proton correlation, which is a relatively local effect, as well as the electronic exchange-correlation for the entire system. This multicomponent DFT-in-DFT embedding theory is applied to the HCN and FHF{sup −} molecules in conjunction with two different electron-proton correlation functionals and three different electronic exchange-correlation functionals. The results illustrate that this approach provides qualitatively accurate nuclear densities in a computationally tractable manner. The general theory is also easily extended to other types of partitioning schemes for multicomponent systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

SU-E-J-228: MRI-Based Planning: Dosimetric Feasibility of Dose Painting for ADCDefined Intra-Prostatic Tumor

Purpose: Apparent diffusion coefficient (ADC) map may help to delineate the gross tumor volume (GTV) in prostate gland. Dose painting with external beam radiotherapy for GTV might increase the local tumor control. The purpose of this study is to explore the maximum boosting dose on GTV using VMAT without sacrificing sparing of organs at risk (OARs) in MRI based planning. Methods: VMAT plans for 5 prostate patients were generated following the commonly used dose volume (DV) criteria based on structures contoured on T2 weighted MRI with bulk electron density assignment using electron densities derived from ICRU46. GTV for each patient was manually delineated based on ADC maps and fused to T2-weighted image set for planning study. A research planning system with Monte Carlo dose engine (Monaco, Elekta) was used to generate the VMAT plans with boosting dose on GTV gradually increased from 85Gy to 100Gy. DV parameters, including V(boosting-dose) (volume covered by boosting dose) for GTV, V75.6Gy for PTV, V45Gy, V70Gy, V72Gy and D1cc (Maximum dose to 1cc volume) for rectum and bladder, were used to measure plan quality. Results: All cases achieve at least 99.0% coverage of V(boosting-dose) on GTV and 95% coverage of V75.6Gy to the PTV. All the DV criteria, V45Gy≤50% and V70Gy≤15% for bladder and rectum, D1cc ≤77Gy (Rectum) and ≤80Gy (Bladder), V72Gy≤5% (rectum and bladder) were maintained when boosting GTV to 95Gy for all cases studied. Except for two patients, all the criteria were also met when the boosting dose goes to 100Gy. Conclusion: It is dosimetrically feasible safe to boost the dose to at least 95Gy to ADC defined GTV in prostate cancer using MRI guided VMAT delivery. Conclusion: It is dosimetrically feasible safe to boost the dose to at least 95Gy to ADC defined GTV in prostate cancer using MRI guided VMAT delivery. This research is partially supported by Elekta Inc.

60 APPLIED LIFE SCIENCES↗

The effects of arcjet operating condition and constrictor geometry on the plasma plume

Measurements of plasma number density and electron temperature were obtained in the plumes of lab arcjet thrusters using electrostatic probes of both spherical and cylindrical geometry. The two arcjet thrusters used had different constrictor and/or nozzle geometries and operated on mixtures of nitrogen, hydrogen, and ammonia to simulate the decomposition products of hydrazine and ammonia. An increase in the measured electron density was observed for both geometries with increasing arc power at a constant mass flow rate and with increasing mass flow rate at a constant arc current. For a given operating condition, the electron number density decreased exponentially off centerline and followed an inverse distance squared relationship along the thrust axis. Typical measured electron temperatures ranged from 0.1 to 0.2 eV.

Carney, Lynnette M.↗

The effects of arcjet thruster operating condition constrictor geometry on the plasma plume

Measurements of plasma number density and electron temperature were obtained in the plumes of lab arcjet thrusters using electrostatic probes of both spherical and cylindrical geometry. The two arcjet thrusters used had different constrictor and/or nozzle geometries and operated on mixtures of nitrogen, hydrogen, and ammonia to simulate the decomposition products of hydrazine and ammonia. An increase in the measured electron density was observed for both geometries with increasing arc power at a constant mass flow rate and with increasing mass flow rate at a constant arc current. For a given operating condition, the electron number density decreased exponentially off centerline and followed an inverse distance squared relationship along the thrust axis. Typical measured electron temperatures ranged from 0.1 to 0.2 eV.

Carney, Lynnette M.↗

LOCAL ANALOGS FOR HIGH-REDSHIFT GALAXIES: RESEMBLING THE PHYSICAL CONDITIONS OF THE INTERSTELLAR MEDIUM IN HIGH-REDSHIFT GALAXIES

We present a sample of local analogs for high-redshift galaxies selected in the Sloan Digital Sky Survey (SDSS). The physical conditions of the interstellar medium (ISM) in these local analogs resemble those in high-redshift galaxies. These galaxies are selected based on their positions in the [O iii]/Hβ versus [N ii]/Hα nebular emission-line diagnostic diagram. We show that these local analogs share similar physical properties with high-redshift galaxies, including high specific star formation rates (sSFRs), flat UV continuums, and compact galaxy sizes. In particular, the ionization parameters and electron densities in these analogs are comparable to those in z ≃ 2–3 galaxies, but higher than those in normal SDSS galaxies by ≃0.6 dex and ≃0.9 dex, respectively. The mass–metallicity relation (MZR) in these local analogs shows −0.2 dex offset from that in SDSS star-forming galaxies at the low-mass end, which is consistent with the MZR of the z∼2--3 galaxies. We compare the local analogs in this study with those in other studies, including Lyman break analogs (LBA) and green pea (GP) galaxies. The analogs in this study share a similar star formation surface density with LBAs, but the ionization parameters and electron density in our analogs are higher than those in LBAs by factors of 1.5 and 3, respectively. The analogs in this study have comparable ionization parameters and electron densities to the GP galaxies, but our method can select galaxies in a wider redshift range. We find the high sSFR and SFR surface density can increase the electron density and ionization parameters, but still cannot fully explain the difference in ISM condition between nearby galaxies and the local analogs/high-redshift galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

Benchmarking and validation of global model code for negative hydrogen ion sources

Benchmarking and validation are prerequisites for using simulation codes as predictive tools. In this work, we have developed a Global Model for Negative Hydrogen Ion Source (GMNHIS) and performed benchmarking of the GMNHIS against another independently developed code, Global Enhanced Vibrational Kinetic Model (GEVKM). This is the first study to propose a quite comprehensive benchmarking test of this kind for models of negative hydrogen ion sources (NHIS), and excellent agreements have been achieved for collisional energy loss per electron-ion pair created, electron number density, electron temperature, densities of H$^{+}_{3}$ and H$^{+}_{2}$ ions, and densities of H(n = 1–3) atoms. Very small discrepancies in number densities of H - ions and H + ions, as well as the vibrational distribution function of hydrogen molecules, can be attributed to the differences in the chemical reactions datasets. The GEVKM includes additional chemical reactions that are more important at high pressures. Moreover, we validated the GMNHIS against experimental data obtained in an electron cyclotron resonance discharge used for H - production. The model qualitatively (and even quantitatively for certain conditions) reproduces the experimental H - number density. The H - number density as a function of pressure first increases at pressures below 1.6 Pa and then saturates for higher pressures. This dependence was analyzed by evaluating contributions from different reaction pathways to the creation and loss of the H - ions. The developed codes can be used for predicting the H - production, improving the performance of NHIS, and ultimately optimizing the parameters of negative ion beams for fusion reactors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dynamics of femto- and nanosecond laser ablation plumes investigated using optical emission spectroscopy

We investigated the spatial and temporal evolution of temperature and electron density associated with femto- and nanosecond laser-produced plasmas (LPP) from brass under similar laser fluence conditions. For producing plasmas, brass targets were ablated in vacuum employing pulses either from a Ti:Sapphire ultrafast laser (40 fs, 800 nm) or from a Nd:YAG laser (6 ns, 1064 nm). Optical emission spectroscopy is used to infer the density and temperature of the plasmas. The electron density (n{sub e}) was estimated using Stark broadened profiles of isolated lines while the excitation temperature (T{sub exc}) was estimated using the Boltzmann plot method. At similar fluence levels, continuum and ion emission are dominant in ns LPP at early times (<50 ns) followed by atomic emission, while the fs LPP provided an atomic plume throughout its visible emission lifetime. Though both ns and fs laser-plasmas showed similar temperatures ({approx}1 eV), the fs LPP is found to be significantly denser at shorter distances from the target surface as well as at early phases of its evolution compared to ns LPP. Moreover, the spatial extension of the plume emission in the visible region along the target normal is larger for fs LPP in comparison with ns LPP.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Time domain reflectometry in time variant plasmas

The effects of time-dependent electron density fluctuations on a synthesized time domain reflectometry response of a one-dimensional cold plasma sheath are considered. Numerical solutions of the Helmholtz wave equation, which describes the electric field of a normally incident plane wave in a specified static electron density profile, are used. A study of the effects of Doppler shifts resulting from moving density fluctuations in the electron density profile of the sheath is included. Varying electron density levels corrupt time domain and distance measurements. Reducing or modulating the electron density levels of a given electron density profile affects the time domain response of a plasma and results in motion of the turning point, and the effective motion has a significant effect on measuring electron density locations.

Scherner, Michael J.↗

Energy transfer between two crossed laser beams in a nonisothermal plasma

The energy transfer between two crossed lasers (a high frequency high amplitude pump and a low frequency low amplitude probe beam) through the coupling with a difference frequency electrostatic mode/quasimode in a plasma is examined. The electrostatic mode in an unmagnetized plasma is a linearly damped acoustic mode, while in a magnetized plasma it is also taken to be a lower hybrid mode. It is driven by the ponderomotive force due to the pump and probe beams. The electron density perturbation associated with the electrostatic mode beats with the oscillatory velocities due to the lasers to produce nonlinear current densities facilitating the energy transfer from the high frequency laser to the probe beam. Efficient energy transfer occurs when the phase matching conditions are satisfied. Even when a finite mismatch between the lasers and the low frequency mode/quasimode exists, a significant energy transfer is possible. The theoretical results for the unmagnetized plasma are in compliance with the published experimental results. In a magnetized plasma lower hybrid wave appears to be a potential contender for facilitating energy exchange between lasers.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗