Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electrolyte”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

A Localized High-Concentration Electrolyte with Optimized Solvents and Lithium Difluoro(oxalate)borate Additive for Stable Lithium Metal Batteries

Lithium (Li) metal is considered as the ideal anode for high energy density rechargeable Li metal batteries (LMBs). However, the morphology instability of Li anode during electrochemical deposition/stripping leads to the uncontrolled growth of dendrites and the solid electrolyte interphase (SEI) layer which causes low Li Coulombic efficiency (CE) and rapid capacity fading in LMBs. Here, we report a carbonate-based localized high concentration electrolyte (LHCE) with a fluorinated ether as a diluent for 4-V class LMBs. This electrolyte consists of 1.2 M lithium bis(fluorosulfonyl)imide (LiFSI) in a co-solvent mixture of ethylene carbonate (EC)/ethyl methyl carbonate (EMC) with bis(2,2,2-trifluoroethyl) ether (BTFE) as diluent and 0.15 M lithium difluoro(oxalate)borate (LiDFOB) as additive. Using this electrolyte, dendrites-free Li deposition with a high Li CE (~98.5 %) is achieved. In addition, it offers much improved cycling stability of Li metal anode compared to previously reported dimethyl carbonate-based LHCEs. For example, a Li||NMC333 battery with a high areal loading of 3.8 mAh cm-2 maintains 84% of its initial capacity after 100 cycles. This is likely due to the highly robust SEI layer formed on the Li metal anode because of the decomposition of LiDFOB salt and EC solvent molecules. Therefore this novel electrolyte is promising for high energy density rechargeable LMBs.

lithium, lithium metal batteries, cycling stabilit↗
DOE OSTI2019

Determining and Minimizing Resistance for Ion Transport at the Polymer/Ceramic Electrolyte Interface

In this work, we report methods to quantify and minimize the interfacial resistance for Li ion transport, R interface , between a model polymer electrolyte, poly(ethylene oxide) + LiCF 3 SO 3 (PE), and a model Li + -conducting ceramic electrolyte, LICGC from Ohara Corporation. By constructing a PE–ceramic–PE trilayer cell, we found R interface to be very large, 1.2 kΩ·cm 2 at 30 °C, accounting for 66% of the total trilayer cell resistance. When dimethyl carbonate, a loose-binding solvent of Li + , was introduced into the trilayer, R interface decreased to essentially zero. As a result, a composite electrolyte with carbonate plasticizers wherein 40 vol % ceramic particles were dispersed in the polymer showed extraordinary room-temperature conductivity of approximately 10 –4 S/cm, 3 orders of magnitude higher than that of the dry composite electrolyte. Here, this discovery can be used as guidance in designing composite electrolytes to achieve synergistic effects.

36 MATERIALS SCIENCE↗
DOE OSTI2016

The Interplay of Al and Mg Speciation in Advanced Mg Battery Electrolyte Solutions

Mg batteries are an attractive alternative to Li-based energy storage due to the possibility of higher volumetric capacities with the added advantage of using sustainable materials. A promising emerging electrolyte for Mg batteries is the magnesium aluminum chloride complex (MACC) which shows high Mg electrodeposition and stripping efficiencies and relatively high anodic stabilities. As prepared, MACC is inactive with respect to Mg deposition; however, efficient Mg electrodeposition can be achieved following an electrolytic conditioning process. Through the use of Raman spectroscopy, surface enhanced Raman spectroscopy, 27Al and 35Cl nuclear magnetic resonance spectroscopy, and pair distribution function analysis, we explore the active vs inactive complexes in the MACC electrolyte and demonstrate the codependence of Al and Mg speciation. These techniques report on significant changes occurring in the bulk speciation of the conditioned electrolyte relative to the as-prepared solution. Analysis shows that the active Mg complex in conditioned MACC is very likely the [Mg2(μ–Cl)3·6THF]+ complex that is observed in the solid state structure. Additionally, conditioning creates free Cl– in the electrolyte solution, and we suggest the free Cl– adsorbs at the electrode surface to enhance Mg electrodeposition.

25 ENERGY STORAGE↗
DOE OSTI2018

Solubility-mediated sustained release enabling nitrate additive in carbonate electrolytes for stable lithium metal anode

Here, the physiochemical properties of the solid-electrolyte interphase, primarily governed by electrolyte composition, have a profound impact on the electrochemical cycling of metallic lithium. Herein, we discover that the effect of nitrate anions on regulating lithium deposition previously known in ether-based electrolytes can be extended to carbonate-based systems, which dramatically alters the nuclei from dendritic to spherical, albeit extremely limited solubility. This is attributed to the preferential reduction of nitrate during solid-electrolyte interphase formation, and the mechanisms behind which are investigated based on the structure, ion-transport properties, and charge transfer kinetics of the modified interfacial environment. To overcome the solubility barrier, a solubility-mediated sustained-release methodology is introduced, in which nitrate nanoparticles are encapsulated in porous polymer gel and can be steadily dissolved during battery operation to maintain a high concentration at the electroplating front. As such, effective dendrite suppression and remarkably enhanced cycling stability are achieved in corrosive carbonate electrolytes.

25 ENERGY STORAGE↗
DOE OSTI2018

Fluorine-free water-in-ionomer electrolytes for sustainable lithium-ion batteries

The continuously increasing number and size of lithium-based batteries developed for large-scale applications raise serious environmental concerns. Herein, we address the issues related to electrolyte toxicity and safety by proposing a "water-in-ionomer" type of electrolyte which replaces organic solvents by water and expensive and toxic fluorinated lithium salts by a non-fluorinated, inexpensive and non-toxic superabsorbing ionomer, lithium polyacrylate. Interestingly, the electrochemical stability window of this electrolyte is extended greatly, even for high water contents. Particularly, the gel with 50 wt% ionomer exhibits an electrochemical stability window of 2.6 V vs. platinum and a conductivity of 6.5 mS cm -1 at 20 °C. Structural investigations suggest that the electrolytes locally self-organize and most likely switch local structures with the change of water content, leading to a 50% gel with good conductivity and elastic properties. A LiTi 2 (PO 4 ) 3 /LiMn 2 O 4 lithium-ion cell incorporating this electrolyte provided an average discharge voltage > 1.5 V and a specific energy of 77 Wh kg -1 , while for an alternative cell chemistry, i.e., TiO 2 /LiMn 2 O 4 , a further enhanced average output voltage of 2.1 V and an initial specific energy of 124.2 Wh kg -1 are achieved.

25 ENERGY STORAGE↗
DOE OSTI2019

Cross-linked beta alumina nanowires with compact gel polymer electrolyte coating for ultra-stable sodium metal battery

Sodium metal batteries have potentially high energy densities, but severe sodium-dendrite growth and side reactions prevent their practical applications, especially at high temperatures. Herein, we design an inorganic ionic conductor/gel polymer electrolyte composite, where uniformly cross-linked beta alumina nanowires are compactly coated by a poly(vinylidene fluoride-co-hexafluoropropylene)-based gel polymer electrolyte through their strong molecular interactions. These beta alumina nanowires combined with the gel polymer layer create dense and homogeneous solid-liquid hybrid sodium-ion transportation channels through and along the nanowires, which promote uniform sodium deposition and formation of a stable and flat solid electrolyte interface on the sodium metal anode. Side reactions between the sodium metal and liquid electrolyte, as well as sodium dendrite formation, are successfully suppressed, especially at 60 °C. The sodium vanadium phosphate/sodium full cells with composite electrolyte exhibit 95.3% and 78.8% capacity retention after 1000 cycles at 1C at 25 °C and 60 °C, respectively.

Science & Technology - Other Topics↗
DOE OSTI2023

Non-polar ether-based electrolyte solutions for stable high-voltage non-aqueous lithium metal batteries

The electrochemical instability of ether-based electrolyte solutions hinders their practical applications in high-voltage Li metal batteries. To circumvent this issue, here, we propose a dilution strategy to lose the Li + /solvent interaction and use the dilute non-aqueous electrolyte solution in high-voltage lithium metal batteries. We demonstrate that in a non-polar dipropyl ether (DPE)-based electrolyte solution with lithium bis(fluorosulfonyl) imide salt, the decomposition order of solvated species can be adjusted to promote the Li + /salt-derived anion clusters decomposition over free ether solvent molecules. This selective mechanism favors the formation of a robust cathode electrolyte interphase (CEI) and a solvent-deficient electric double-layer structure at the positive electrode interface. When the DPE-based electrolyte is tested in combination with a Li metal negative electrode (50 μm thick) and a LiNi 0.8 Co 0.1 Mn 0.1 O 2 -based positive electrode (3.3 mAh/cm 2 ) in pouch cell configuration at 25 °C, a specific discharge capacity retention of about 74% after 150 cycles (0.33 and 1 mA/cm 2 charge and discharge, respectively) is obtained.

25 ENERGY STORAGE↗
DOE OSTI2023

Knowledge-driven design of solid-electrolyte interphases on lithium metal via multiscale modelling

Abstract Due to its high energy density, lithium metal is a promising electrode for future energy storage. However, its practical capacity, cyclability and safety heavily depend on controlling its reactivity in contact with liquid electrolytes, which leads to the formation of a solid electrolyte interphase (SEI). In particular, there is a lack of fundamental mechanistic understanding of how the electrolyte composition impacts the SEI formation and its governing processes. Here, we present an in-depth model-based analysis of the initial SEI formation on lithium metal in a carbonate-based electrolyte. Thereby we reach for significantly larger length and time scales than comparable molecular dynamic studies. Our multiscale kinetic Monte Carlo/continuum model shows a layered, mostly inorganic SEI consisting of LiF on top of Li 2 CO 3 and Li after 1 µs. Its formation is traced back to a complex interplay of various electrolyte and salt decomposition processes. We further reveal that low local Li + concentrations result in a more mosaic-like, partly organic SEI and that a faster passivation of the lithium metal surface can be achieved by increasing the salt concentration. Based on this we suggest design strategies for SEI on lithium metal and make an important step towards knowledge-driven SEI engineering.

25 ENERGY STORAGE↗
DOE OSTI2025

Hydrotrope-enabled high concentration aqueous electrolytes for reversible and sustainable iron metal anodes

Iron metal-based energy storage devices hold great potential in stationary grid-scale sustainable energy due to the high theoretical specific capacity, ultralow cost, and abundance of iron. However, their practical deployment is limited by the poor reversibility of iron plating and stripping, as well as competitive hydrogen evolution. Here we introduce the concept of hydrotropy into iron electrolytes by developing an environmentally friendly and cost-effective high-concentration ferrous sulfate electrolyte using urea as a hydrotropic agent. The designed electrolyte increases the Coulombic efficiency of iron metal electrodes to approximately 96.5%, compared with ~84.6% for the dilute electrolyte. Molecular dynamics simulations and Raman spectroscopy illustrate that urea regulates the competitive coordination of anions and urea in the iron solvation sheath, while reconstructing the hydrogen-bond network in free water molecules. This reduces the activity of both solvated and free water, thereby alleviating hydrogen evolution. Moreover, the coordinated anions and urea molecules facilitate the in-situ formation of an organic-inorganic hybrid protective layer on the metallic iron, establishing a physical barrier against water and promoting homogeneous interfacial reactions. This work demonstrates an appealing opportunity to design cost-effective and high-performance electrolytes and propels the practical application of iron metal-based energy storage devices.

Feng, Guangxia [Stanford Univ., CA (United States)↗
DOE OSTI2018

Tuning the electrolyte network structure to invoke quasi-solid state sulfur conversion and suppress lithium dendrite formation in Li–S batteries

Here, the lithium-sulfur battery is promising as an alternative to conventional lithium-ion technology due to the high energy density of both sulfur and lithium metal electrodes. Extended life time has been demonstrated, but two notable challenges still exist in battery applications: overcoming the undesired high electrolyte/sulfur ratio, and inhibiting Li dendrite growth and its parasitic reaction with the electrolyte. Here we demonstrate that by tuning the electrolyte structure, the challenges at both electrodes can be tackled simultaneously. The sulfur speciation pathway transforms from a dissolution-precipitation route to a quasi-solid-state conversion in the presence of lowered solvent activity and an extended electrolyte network structure as revealed by ab initio calculations, curtailing the need for high electrolyte volumes. With such an optimized structure, the Li plates dendrite-free and shows 20-fold reduction in parasitic reactions with Li, avoiding electrolyte consumption and greatly extending the life time of a low E/S (5 µl/mg -1 ) sulfur cell.

25 ENERGY STORAGE↗
DOE OSTI2020

Real-time mass spectrometric characterization of the solid–electrolyte interphase of a lithium-ion battery

Solid-electrolyte interphase (SEI) is a key component that dictates the performance of most electrochemical devices, but the understanding of its chemistry and structure has been limited by the lack of in-situ tools. In this work, we report SEI live-formation in Li-ion battery under operando condition with liquid secondary ion mass spectrometry (SIMS), which, in combination with molecular dynamics (MD) simulation, presents the first dynamic picture with molecular-accuracy about this key component. Before any interphasial chemistry occurs during the initial charging, an electric double layer forms at the electrode-electrolyte interface via the self-assembly of solvent molecules directed by both Li+ and potential of the electrified surface. Such double layer structure predicts the eventual interphasial chemistries formed from the electrolytes, where the negatively-charged electrode surface repels salt anions from the inner-Helmholtz layer and results in an inner SEI that is thin, dense and inorganic in nature but LiF-depleted. It was this dense layer that exercises the major functions of an interphase, i.e., conducting Li+ but insulating electrons. An outer layer that is electrolyte-permeable and organic-rich appears after formation of the inner SEI. In highly-concentrated electrolyte, the presence of LiF in the inner-SEI is raised due to the high population of salt anions in the double layer. These real-time observations at nano-scale reveal in general sense how an interphase inherits chemistry from inner-Helmholtz layer structure, and establish guidelines in engineering desirable interphases for the future battery chemistries.

Zhou, Yufan↗
DOE OSTI2025

Non-fluorinated electrolyte for high-voltage anode-free sodium metal battery

Abundant sodium (Na) batteries are a sustainable alternative to resource-constrained lithium-ion batteries, offering huge cost advantages. However, developing high-voltage anode-free sodium metal batteries (SMBs) to narrow the energy density gap with lithium-ion batteries is hindered by a critical challenge: existing electrolytes cannot simultaneously achieve ultra-high Na coulombic efficiency and anodic stability. Here, in this study, we present a rationally designed non-fluorinated electrolyte (1.0 M NaPF 6 in 1,2-diethoxyethane/1,2-di-tert-butoxyethane) to address this key limitation, achieving Na coulombic efficiency of >99.95% and anodic stability of >4.8 V. For coin cells (2.0 mAh cm −2 , N/P = 1.7), our electrolyte design enables 4.0 V Na | |Na 3 V 2 (PO 4 ) 3 (NVP) at 5 C and 4.3 V Na | |NaNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) at 0.3 C for 5,000 and 500 cycles with a capacity retention >80%. Remarkably, the 50 mAh anode-free pouch cells 4.0 V Al | |NVP and 4.3 V Al | |NMC622 also achieve 500 and 300 cycles (retention >75%) with a specific energy of >360 Wh kg (electrode) −1 . This work focuses on electrolyte optimization and conceptual advances, whereas critical aspects such as safety, large-scale manufacturability and practical feasibility of SMBs require further investigation. The electrolyte design using non-fluorinated solvents enhances the anodic stability without sacrificing Na efficiency, laying groundwork for advancing low-cost, high-energy SMBs and supporting the transition to sustainable battery technologies.

25 ENERGY STORAGE↗
DOE OSTI2015

A fundamental study on the [(μ-Cl) 3 Mg 2 (THF) 6 ] + dimer electrolytes for rechargeable Mg batteries

We present a fundamental study on [(μ-Cl) 3 Mg 2 (THF) 6 ] + dimer electrolytes using various physical methods including Subambient Pressure Ionization with Nanoelectrospray Mass spectrometry (SPIN-MS), Raman spectroscopy, 25 Mg{ 1 H} NMR, 27 Al{ 1 H} NMR and electrochemical analysis. For the first time, long time sought THF solvated [MgCl] + species was experimentally characterized by SPIN mass spectrometry in the solution of the Mgdimer containing electrolyte, confirming the mono-Cl- abstraction reaction between MgCl 2 and an Al Lewis acid. Solvated MgCl 2 in the electrolyte was confirmed by Raman spectroscopy. The experimental results establish the previously proposed dimerization equilibrium of solvated [MgCl] + and MgCl2 with [(μ-Cl) 3 Mg 2 (THF)6] + . 25 Mg{ 1 H} NMR, 27 Al{ 1 H} NMR and electrochemical analysis on chloration reaction of [(μ-Cl) 3 Mg 2 (THF) 6 ]AlPh 3 Cl with external Cl- led to further insights on the coordination chemistry of the dimer electrolyte. Finally, a comprehensive mechanism is proposed for the reversible electrochemical Mg deposition and stripping and Mg 2+ and Cl- ion transports of the Mg dimer electrolytes in rechargeable Mg batteries.

25 ENERGY STORAGE↗
DOE OSTI2017

Elucidating electrolyte decomposition under electron-rich environments at the lithium-metal anode

The lithium metal anode is one of the key components of the lithium–sulfur (Li–S) batteries, which are considered one of the most promising candidates for the next generation of battery systems. However, one of the main challenges that have prevented Li-metal anodes from becoming feasible to be used in commercial batteries is the continuous decomposition of the electrolyte due to its high reactivity, which leads to the formation of solid–electrolyte interphase (SEI) layers. The properties of the SEI can dramatically affect the performance of the batteries. Thus, a rigorous understanding of the electrolyte decomposition is crucial to elucidate improvements in performance of the Li–S technology. Here, in this work, using density functional theory (DFT) and ab initio molecular dynamics simulations (AIMD), we investigate the effect of electron-rich environments on the decomposition mechanism of electrolyte species in pure 1,2-dimethoxyethane (DME) solvent and 1 M lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) and lithium bis(fluorosulfonyl)imide (LiFSI) salt solutions. It is found that systems with pure DME require an average environment of at least ~0.9 |e| per molecule for a DME to decompose into CH 3 O - and C 2 H 4 2- via a 4-electron transfer. In the case of mixtures, the salts are very prone to react with any excess of electrons. In addition, DME dehydrogenation due to reactions with fragments coming from the salt decompositions was detected. Formation of oligomer anionic species from DME and salt fragments were also identified from the AIMD simulations. Finally, the thermodynamics and kinetics of the most relevant electrolyte decomposition reactions were characterized. DME decomposition reactions predicted from the AIMD simulations were found to be thermodynamically favorable under exposure to Li atoms and/or by reactions with salt fragments. Lastly, in most cases, these reactions were shown to have low to moderate activation barriers.

25 ENERGY STORAGE↗
DOE OSTI2019

Study of segmental dynamics and ion transport in polymer–ceramic composite electrolytes by quasi-elastic neutron scattering

Composite electrolytes composed of a polymer electrolyte and an ion-conducting ceramic electrolyte are promising in fulfilling the requirements for a stable lithium metal anode. In this work, we identify the effects of the surface of a lithium-ion-conducting ceramic, the Ohara LICGC™ ceramic, on the segmental dynamics and ionic conductivity of polymer electrolyte consisting of poly(ethylene oxide) and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI). Using quasi-elastic neutron scattering, we study the segmental motion of PEO chains under the confinement of LiTFSI salt and Ohara ceramic, in their melt state (363 K). We compare the relaxation time, τ, and the monomeric friction coefficient, ζ, of four samples: neat PEO, PEO + Ohara ceramic, PEO + LiTFSI and PEO + LiTFSI + Ohara ceramic. In the absence of LiTFSI, Ohara ceramic posed negligible change in the segmental dynamics of PEO. In contrast, with the presence of LiTFSI, Ohara ceramic slowed down the segmental motion of PEO chains by ~60% compared to neat PEO + LiTFSI. The intrinsic ionic conductivity of the polymer phase in the composite decreased by ~30% compared to the neat polymer electrolyte. The underpinnings of these results may be that polymer chains in the vicinity of the ceramic surface are less mobile due to coordination with surface bound lithium ions.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Role of conductive binder to direct solid–electrolyte interphase formation over silicon anodes

In this study, with the use of in situ neutron reflectometry (NR) we show how the addition of an electronically conductive polymeric binder, PEFM, mediates the solid–electrolyte interphase (SEI) formation and composition on an amorphous Si (a-Si) electrode as a function of the state-of-charge. Upon initial contact with the electrolyte a Li rich, 41 Å thick, layer forms on the surface of the anode below the polymer layer. At 0.8 V (vs. Li/Li + ), a distinct SEI layer forms from the incorporation of electrolyte decomposition products in the reaction layer that is organic in nature. In addition, solvent uptake in the PEFM layer occurs resulting in the layer swelling to ~200 Å. Upon further polarization to 0.4 and 0.15 V (vs. Li/Li + ) a thick layer (800 Å) on the surface of the Si is evident where a diffuse interface between the PEFM and SEI occurs resulting in a matrix between the two layers, as the binder has taken up a large amount of electrolyte. The two layers appear to be interchanging solvent molecules from the PEFM to the SEI to the Si surface preventing the lithiation of the a-Si. By 0.05 V (vs. Li/Li + ) a Li rich, 72 Å thick, SEI layer condenses on the surface of the anode, and a 121 Å intermixed layer on top of the SEI with LiF and Li–C–O species is present with the rest blended into the electrolyte.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Exploring the charge reactions in a Li–O 2 system with lithium oxide cathodes and nonaqueous electrolytes

Nonaqueous lithium–oxygen batteries have attracted considerable attention due to their high energy density. Huge efforts have been made to unravel the fundamentals of Li–O 2 battery chemistry. However, current Li–O 2 batteries still suffer from several unresolved problems such as the instability of electrolytes and sluggish oxidation of lithium oxides during the charging process. In this paper, we propose a detailed study to investigate the charge mechanism of lithium oxide materials in different electrolytes. Commercially available lithium peroxide and lithium oxide have been employed as cathodes to determine how lithium oxides (both lithium oxide and lithium peroxide) and electrolytes change during charge. Lastly, the result shows that Li 2 O 2 decomposed to lithium and oxygen; meanwhile, the electrolyte has a significant influence on Li 2 O 2 decomposition. Furthermore, while most of the Li 2 O material participates in side reactions with the electrolyte, some of it is found to delithiate and crumble in structure.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Visualizing percolation and ion transport in hybrid solid electrolytes for Li–metal batteries

Hybrid solid electrolytes are composed of organic (polymer) and inorganic (ceramic) ion conducting materials, and are promising options for large-scale production of solid state lithium–metal batteries. Hybrid solid electrolytes containing 15 vol% Al-LLZO demonstrate optimal ionic conductivity properties. Ionic conductivity is shown to decrease at high inorganic loadings. This optimum is most obvious above the melting temperature of polyethylene oxide where the polymer is amorphous. Structural analysis using synchrotron nanotomography reveals that the inorganic particles are highly aggregated. The aggregation size grows with inorganic content and the largest percolating clusters measured for 5 vol%, 15 vol% and 50 vol% were ~12 μm 3 , 206 μm 3 , and 324 μm 3 , respectively. Enhanced transport in hybrid electrolytes is shown to be due to polymer|particle (Al-LLZO) interactions and ionic conductivity is directly related to the accessible surface area of the inorganic particles within the electrolyte. Finally, ordered and well-dispersed structures are ideal for next generation hybrid solid electrolytes.

25 ENERGY STORAGE↗