Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “drawing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

A deformation-processed Al-matrix/Ca-nanofilamentary composite with low density, high strength, and high conductivity

Light, strong materials with high conductivity are desired for many applications such as power transmission conductors, fly-by-wire systems, and downhole power feeds. However, it is difficult to obtain both high strength and high conductivity simultaneously in a material. In this study, an Al/Ca (20 vol%) nanofilamentary metal-metal composite was produced by powder metallurgy and severe plastic deformation. Fine Ca metal powders (~200 µm) were produced by centrifugal atomization, mixed with pure Al powder, and deformed by warm extrusion, swaging, and wire drawing to a true strain of 12.9. The Ca powder particles became fine Ca nanofilaments that reinforce the composite substantially by interface strengthening. The conductivity of the composite is slightly lower than the rule-of-mixtures prediction due to minor quantities of impurity inclusions. As a result, the elevated temperature performance of this composite was also evaluated by differential scanning calorimetry and resistivity measurements.

36 MATERIALS SCIENCE↗

Multicycle flash sintering of cubic Y 2 O 3 -stabilized ZrO 2 : An in situ energy dispersive synchrotron x-ray diffraction study with high temporal resolution

The current induced unit cell volume changes, (111) Bragg peak full width at half maximum (FWHM) and its integrated intensity in 8 % Y 2 O 3 stabilized ZrO 2 (8 %YSZ) solid state electrolyte was monitored during a triple-flash sintering experiment by in situ energy dispersive x-ray diffraction using a polychromatic synchrotron probe (max, photon energy 200 keV) with 2 second temporal resolution. The first spontaneous singularity in the unit cell volume (+0.54 %) was observed at 899 °C under 15 V/mm applied field intensity, which was associated with 13 mA/mm 2 current draw and an increase in density to 97 %. Following anelastic relaxation of the unit cell volume under open circuit conditions, the same applied field was applied twice in a row which resulted in additional induced singularities at 925 °C (+0.48 %) and 944 °C (+0.42 %). A floating baseline, which was above the thermal expansion baseline, was observed from 833 to 969 °C and was attributed to Joule heating. In conclusion, the singularity at 899 °C is associated with a sharp change in (111) FWHM and a 34 % decrease in integrated peak area that was attributed to changes in the distribution of oxygen vacancies and the changes in their concentration as induced by the applied field in the spontaneous transient stage of flash sintering.

36 MATERIALS SCIENCE↗

Role of geometric dynamic recrystallization in nanocrystalline alloys

Nanocrystalline and near-nano-grained metals are plagued with an overall lack of ductility and formability. This is in part due to their inability to support the dislocation mechanisms or undergo the same types of transformations that conventional coarse-grained metals access in order to increase their workability. Therefore, despite their advanced properties such as high strength, the manufacturing of such fine-grained metals, which exposes them to multi-axial states of stress in operations such as rolling, drawing, extrusion, forging, and bending, has not been possible. In this work, we address this limitation and highlight an important aspect of geometric dynamic recrystallization (GDRX) in nanocrystalline materials as a way to improve manufacturability. In particular, using two different alloy compositions and two different processing techniques, this study points to the fact that if nanocrystalline or near nano metals can be truly stabilized, they can repeatedly undergo the same types of processes that conventional coarse-grained metals endure, increasing both their formability and hence manufacturability. The results reveal that due to a large number of initial high-angle grain boundaries and large applied compressive strains, GDRX is activated in the absence of any discontinuous dynamic recrystallization (DDRX) or continuous dynamic recrystallization (CDRX). This is a unique aspect of stabilized nanocrystalline materials, as traditionally fine-grained metals are not microstructurally stable enough to accommodate such an event.

36 MATERIALS SCIENCE↗

Investigation of glass-ceramic lithium thiophosphate solid electrolytes using NMR and neutron scattering

Solid-state Li batteries require solid electrolytes which have high Li+ conductivity and good chemical/mechanical compatibility with Li metal anodes and high energy cathodes. Structure/function correlations which relate local bonding to macroscopic properties are needed to guide development of new solid electrolyte materials. This study combines diffraction measurements with solid-state nuclear magnetic resonance spectroscopy (ssNMR) and neutron pair distribution function (nPDF) analysis to probe the short-range vs. long-range structure of glass-ceramic Li 3 PS 4 -based solid electrolytes. Here, we demonstrate how different synthesis conditions (e.g., solvent selection and thermal processing) affect the resulting polyanionic network. More specifically, structures with high P coordination numbers (e.g., PS 4 3– and P 2 S 7 4– ) correlate with higher Li + mobility compared to other polyanions (e.g., (PS 3 ) n n– chains and P 2 S 6 4– ). Overall, this work demonstrates how ssNMR and nPDF can be used to draw key structure/function correlations for solid-state superionic conductors.

36 MATERIALS SCIENCE↗

Nuclear Data Sheets for A = 198

The 2002 version of Nuclear Data Sheets for A = 198 (2002Zh04) has been updated and revised on the basis of the experimental results from various decay and reaction studies before June 2008. The experimental data for all known nuclei of A = 198 (Ir,Pt,Au,Hg, Tl,Pb,Bi,Po,At,Rn) have been reevaluated. The experimental methods, references, J{pi} arguments, and necessary comments are given in the text. The theoretical internal conversion coefficient (ICC) (and its associated uncertainty) for {gamma}-rays have been interpolated from theoretical values based on the 'Frozen Orbital' approximation (2002Ba85) using the BRICC(v2.2) computer program. Summary band-structure drawings and level schemes from both radioactive decay and reaction studies are presented. Also of special interest are the new levels of {sup 198}Ir, {sup 198}Tl nuclei and identification of new superdeformed bands in {sup 198}Pb and {sup 198}Po.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

What Students Think About (Nuclear) Radiation – Before and After Fukushima

Preparing successful science lessons is very demanding. One important aspect a teacher has to consider is the students' previous knowledge about the specific topic. This is why research about students' preconceptions has been, and continues to be, a major field in science education research. Following a constructivistic approach [R. Duit et al., International handbook of research on conceptual change, p. 629 (2008)], helping students learn is only possible if teachers know about students' ideas beforehand. Studies about students' conceptions regarding the major topics in physics education (e.g. mechanics, electrodynamics, optics, thermodynamics), are numerous and well-documented. The topic radiation, however, has seen very little empirical research about students' ideas and misconceptions. Some research was conducted after the events of Chernobyl [P. Lijnse et al., International Journal of Science Education 12, 67 (1990); B. Verplanken, Environment and Behavior 21, 7 (1989)] and provided interesting insight into some of the students' preconceptions about radiation. In order to contribute empirical findings to this field of research, our workgroup has been investigating the conceptions students have about the topic radiation for several years [S. Neumann et al., Journal of Science Education and Technology 21, 826 (2012)]. We used children's drawings and conducted short follow-up interviews with students (9 – 12 years old) and more detailed interviews with 15-year-old students. Both studies were originally done before the events in Fukushima and replicated a year later. We not only asked students about their general associations and emotions regarding the term radiation, but also examined the students' risk perceptions of different types of radiation. Through the use of open-ended questions we were able to examine students' conceptions about different types of radiation (including nuclear) that could be a hindrance to student learning. Our results show that students' associations with the term radiation are almost exclusively related to nuclear radiation. Their emotions concerning the word radiation are predominately negative, and the idea that radiation is something to be avoided is widespread among students. Since most students were not familiar with the idea of naturally occurring nuclear radiation, it does not seem surprising that a lot of them generally described radiation as something artificial and man-made. Also, none of the students interviewed mentioned applications of nuclear radiation in medicine or technology (besides its use in nuclear power plants). All of these results have shown to be even more prevalent in the interview session that was conducted after the tragic events in Fukushima in 2011. In this article, we will also include suggestions for improving the teaching of the topic radiation in school.

54 ENVIRONMENTAL SCIENCES↗

Stochasticity and robustness in spiking neural networks

Despite drawing inspiration from biological systems which are inherently noisy and variable, artificial neural networks have been shown to require precise weights to carry out the task which they are trained to accomplish. This creates a challenge when adapting these artificial networks to specialized execution platforms which may encode weights in a manner which restricts their accuracy and/or precision.Reflecting back on the non-idealities which are observed in biological systems, we investigated the effect these properties have on the robustness of spiking neural networks under perturbations to weights. First, we examined techniques extant in conventional neural networks which resemble noisy processes, and postulated they may produce similar beneficial effects in spiking neural networks. Second, we evolved a set of spiking neural networks utilizing biological non-idealities to solve a pole-balancing task, and estimated their robustness. We showed it is higher in networks using noisy neurons, and demonstrated that one of these networks can perform well under the variance expected when a hafnium-oxide based resistive memory is used to encode synaptic weights. Lastly, we trained a series of networks using a surrogate gradient method on the MNIST classification task. We confirmed that these networks demonstrate similar trends in robustness to the evolved networks. We discuss these results and argue that they display empirical evidence supporting the role of noise as a regularizer which can increase network robustness.

97 MATHEMATICS AND COMPUTING↗

A 15GSa/s, 1.5GHz bandwidth waveform digitizing ASIC

The PSEC4 custom integrated circuit was designed for the recording of fast waveforms for use in large-area time-of-flight detector systems. The ASIC has been fabricated using the IBM-8RF 0.13 micron CMOS process. On each of 6 analog channels, PSEC4 employs a switched capacitor array (SCA) 256 samples deep, a ramp-compare ADC with 10.5 bits of DC dynamic range, and a serial data readout with the capability of region-of-interest windowing to reduce dead time. The sampling rate can be adjusted between 4 and 15 Gigasamples/second [GSa/s] on all channels and is servo-controlled on-chip with a low-jitter delay-locked loop (DLL). The input signals are passively coupled on-chip with a -3 dB analog bandwidth of 1.5 GHz. The power consumption in quiescent sampling mode is less than 50 mW/chip; at a sustained trigger and readout rate of 50 kHz the chip draws 100 mW. After fixed-pattern pedestal subtraction, the uncorrected integral non-linearity is 0.15% over an 750 mV dynamic range. With a linearity correction, a full 1 V signal voltage range is available.The sampling timebase has a fixed-pattern non-linearity with an RMS of 13%, which can be corrected for precision waveform feature extraction and timing.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Application of Bayes' theorem for pulse shape discrimination

A Bayesian approach is proposed for pulse shape discrimination of photons and neutrons in liquid organic scinitillators. Instead of drawing a decision boundary, each pulse is assigned a photon or neutron confidence probability. In addition, this allows for photon and neutron classification on an event-by-event basis. The sum of those confidence probabilities is used to estimate the number of photon and neutron instances in the data. An iterative scheme, similar to an expectation-maximization algorithm for Gaussian mixtures, is used to infer the ratio of photons-to-neutrons in each measurement. Therefore, the probability space adapts to data with varying photon-to-neutron ratios. A time-correlated measurement of Am–Be and separate measurements of 137 Cs, 60 Co and 232 Th photon sources were used to construct libraries of neutrons and photons. These libraries were then used to produce synthetic data sets with varying ratios of photons-to-neutrons. Probability weighted method that we implemented was found to maintain neutron acceptance rate of up to 90% up to photon-to-neutron ratio of 2000, and performed 9% better than the decision boundary approach. Furthermore, the iterative approach appropriately changed the probability space with an increasing number of photons which kept the neutron population estimate from unrealistically increasing.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Validation of gamma-ray detection techniques for safeguards monitoring at natural uranium conversion facilities

Recent IAEA circulars and policy papers have sought to implement safeguards when any purified aqueous uranium solution or uranium oxides suitable for isotopic enrichment or fuel fabrication exists. Under the revised policy, IAEA Policy Paper 18, the starting point for nuclear material under safeguards was reinterpreted, suggesting that purified uranium compounds should be subject to safeguards procedures no later than the first point in the conversion process. In response to this technical need, a combination of simulation models and experimental measurements were employed to develop and validate concepts of nondestructive assay monitoring systems in a natural uranium conversion plant (NUCP). In particular, uranyl nitrate (UO 2 (NO 3 ) 2 ) solution exiting solvent extraction was identified as a key measurement point (KMP), where gamma-ray spectroscopy was selected as the process monitoring tool. The Uranyl Nitrate Calibration Loop Equipment (UNCLE) facility at Oak Ridge National Laboratory was employed to simulate the full-scale operating conditions of a purified uranium-bearing aqueous stream exiting the solvent extraction process in an NUCP. Nondestructive assay techniques using gamma-ray spectroscopy were evaluated to determine their viability as a technical means for drawing safeguards conclusions at NUCPs, and if the IAEA detection requirements of 1 significant quantity (SQ) can be met in a timely way. This work investigated gamma-ray signatures of uranyl nitrate circulating in the UNCLE facility and evaluated various gamma-ray detector sensitivities to uranyl nitrate. These detector validation activities include assessing detector responses to the uranyl nitrate gamma-ray signatures for spectrometers based on sodium iodide, lanthanum bromide, and high-purity germanium detectors. The results of measurements under static and dynamic operating conditions at concentrations ranging from 10–90 g U/L of natural uranyl nitrate are presented. A range of gamma-ray lines is examined, including attenuation for transmission measurement of density and concentration. It was determined that transmission-corrected gamma-ray spectra provide a reliable way to monitor the 235 U concentration of uranyl nitrate solution in transfer pipes in NUCPs. Furthermore, existing predictive and analysis methods are adequate to design and realize practical designs. The 137 Cs transmission source employed in this work is viable but not optimal for 235 U densitometry determination. Validated simulations assessed the viability of 133 Ba and 57Co as alternative densitometry sources. All three gamma-ray detectors are viable for monitoring natural uranium feed; although high-purity germanium is easiest to interpret, it is, however, the least attractive as an installation instrument. Overall, for monitoring throughput in a facility such as UNCLE, emulating the uranium concentration and pump speeds of the Springfields conversion facility in the United Kingdom, an uncertainty of less than 0.17% is required in order to detect the diversion of 1 SQ of uranyl nitrate through changes in uranium concentration over an accountancy period of one year with a detection probability of 50%. As a result, calibrated gamma-ray detection systems are capable of determining the concentration of uranium content in NUCPs, it is only in combination with verifiable operator declarations and supporting data, such as flow rate and enrichment, that safeguards conclusions can be drawn.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Sensitivity analysis of high resolution gamma-ray detection for safeguards monitoring at natural uranium conversion facilities

Under the policies proposed by recent International Atomic Energy Agency (IAEA) circulars and policy papers, implementation of safeguards exists when any purified aqueous uranium solution or uranium oxides suitable for isotopic enrichment or fuel fabrication exists. Under IAEA Policy Paper 18, the starting point for nuclear material under safeguards was reinterpreted, suggesting that purified uranium compounds should be subject to safeguards procedures no later than the first point in the conversion process. In response to this technical need, a combination of simulation models and experimental measurements were employed in previous work to develop and validate gamma-ray nondestructive assay monitoring systems in a natural uranium conversion plant (NUCP). In particular, uranyl nitrate (UO 2 (NO 3 ) 2 ) solution exiting solvent extraction was identified as a key measurement point (KMP). Passive nondestructive assay techniques using high resolution gamma-ray spectroscopy were evaluated to determine their viability as a technical means for drawing safeguards conclusions at NUCPs, and if the IAEA detection requirements of 1 significant quantity (SQ) can be met in a timely manner. Building upon the aforementioned previous validation work on detector sensitivity to varying concentrations of uranyl nitrate via a series of dilution measurements, this work investigates detector response parameter sensitivities to gamma-ray signatures of uranyl nitrate. The full energy peak efficiency of a detection system is dependent upon the sample, geometry, absorption, and intrinsic efficiency parameters. Perturbation of these parameters translates into corresponding variations of the 185.7 keV peak area of the 235 U in uranyl nitrate. Such perturbations in the assayed signature impact the quality or versatility of the safeguards conclusions drawn. Given the potentially high throughput of uranyl nitrate in NUCPs, the ability to assay 1 SQ of material requires uncertainty «1%. Accounting for material self-shielding properties, pipe thickness, and source-detector orientation is instrumental in determining the robustness of gamma-ray detection in the process monitoring of uranyl nitrate in NUCPs. Monte Carlo models and ray-tracing models were employed to determine the sensitivity of the detected 185.7 keV photon to self-shielding properties, pipe thickness, and source-detector geometry. Considering the implementation of the detection of 1 SQ, diversion of 1 SQ becomes essentially undetectable given the systematic uncertainty, in addition to considerations such as propagating uncertainties due to pipe offset/position, as well as minor variations in pipe thickness. Consequently, pipe thickness was the most sensitive variable in affecting full energy efficiency of the 185.7 keV signature peak with up to 8% variation in efficiency for ±0.5 mm changes in Schedule 40 304L stainless steel piping. Furthermore, computation of the attenuation correction factor of the uranyl nitrate solution [CF(AT) (i.e. εsample)] using Parker's method using with the approximation for the geometrical factor κ≈π/4 was validated through experimental, Monte Carlo and ray-tracing calculations for a uranyl nitrate filled transfer pipe segment. Furthermore, quantifying sensitivity in detector position, as well as voiding effects due to bubbly flow or laminar flow with an air gap in the uranyl nitrate becomes increasingly important as considerations from (static) design-scale measurements translate into (dynamic) field operations tests.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Operation of the prospective beamline calorimeter in the high-radiation forward environment of the international linear collider

Results on electromagnetically-induced radiation damage to silicon diode sensors, obtained from the T506 experiment at SLAC, are used in concert with detailed shower simulations to project the effects of radiation damage on the proposed International Linear Collider Beamline Calorimeter (BeamCal) detector system. The study makes use of the FLUKA Monte Carlo to simulate electromagnetic showers in both the T506 apparatus and the prospective BeamCal detector system. Under the conservative assumption that damage leading to sensor leakage currents is dominated by the neutron component of the electromagnetic shower, and assuming that resulting leakage currents depend linearly on neutron fluence, the power consumption required to operate the BeamCal detector at a temperature of -10° C would be expected to increase by approximately 100 W per year of operation. Lowering the operating temperature to -30° C would be expected to reduce the growth in power consumption to approximately 10 W per year. Under other assumptions about the source of damage, the accumulated power draw would be expected to be significantly less. Results on fluences of both electromagnetic and hadronic particles in regions peripheral to the bulk of the BeamCal detector system, where front-end electronics would be mounted, are also presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Model uncertainty in accelerator application simulations

Monte-Carlo nuclear reaction and transport codes are widely used to devise accelerator-based nuclear physics experiments; at the same time, many experiments are performed to validate the Monte-Carlo codes, which can be used for the design of full-scale nuclear power applications or the design of new benchmark experiments. Dedicated model benchmark studies investigate a broad range of nuclear reactions and quantities. Examples of these include isotope formation or secondary particle fluxes that result from the interactions of GeV-range hadrons with monoisotopic targets, which can be used to assess the respective systematic uncertainty of models. Such benchmark studies, as well as many nuclear application experiments and simulations carried out by various groups over the last few decades, enable us to draw methodological lessons. In this work, model uncertainty determined based on available experimental data allow us to identify the effects of practitioner expertise as well as the design of codes (user access to micro-scale parameters) on the range of uncertainties. We found that in cases when simulations are performed by code developers or users that are very experienced in performing simulations, the model to experiment quantity ratios generally agree with the limits determined by dedicated benchmark studies. In other cases, the ratios generally tend to be either smaller (underestimation of model error) or larger (overestimation of model error). A plausible explanation of the aforementioned effects is suggested.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Surface chemistry of neutron irradiated tungsten in a high-temperature multi-material environment

Deuterium retention was measured on neutron irradiated tungsten samples where one side of the samples had a visually clean metallic luster and the opposite side appeared to have a reacted surface film. Deuterium plasma exposure and subsequent thermal desorption from the reacted surface side produced spectra with larger total deuterium desorption at lower temperatures than from the clean surface side. For neutron irradiation, these W disk samples were installed in an irradiation capsule in such a way that one side of W sample was in contact with the surface of another W sample, and the opposite side was in contact with a SiC temperature monitor. The composition of the reacted surface was investigated using X-ray photoelectron spectroscopy and showed that SiC had interdiffused into the W samples. Neutron enhanced diffusion likely contributed to this as SiC and W are stable at temperatures exceeding the irradiation temperature. Results highlight the need to consider the surface chemistry of samples in drawing conclusions on hydrogen isotope retention of W materials and also illustrate the complexity of multi-material nuclear environments expected in fusion devices.

36 MATERIALS SCIENCE↗

Design optimization methods for high-performance research reactor core design

Typical objectives of high-performance research reactors include neutron scattering, materials irradiation, and isotope production. The creation of a core that optimizes these multiple objectives often presents a multidimensional (i.e., in design space), multiobjective optimization problem. The developed systematic approach discussed herein draws on response surface methodology to validate and leverage a surrogate model to serve in place of high-fidelity computational analyses. Optimization and design analysis methods leverage this surrogate model to provide a flexible tool for generating optimized designs and understanding the impact of design decisions on desired metrics. In applications to High Flux Isotope Reactor (HFIR) low-enriched uranium (LEU) core designs, neutronic, isotopic evolution, and thermal hydraulic analyses are used to generate key performance and safety metrics for assessing the feasibility and fitness of given designs. Three optimized designs that determine different desired metrics and constraints (e.g., key metric weighting and fabrication constraints) are presented, providing potential design options that satisfy the requirements for HFIR’s conversion from high enriched uranium to LEU fuel.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Alchemy: A Model-Based Approach for 2D to 3D Autonomous Nuclear System Design

Engineering design of nuclear power plant (NPP) piping and equipment systems frequently bypasses crucial 2D system planning, instead moving straight to 3D modeling. This often leads to designs that exceed building envelope constraints, forcing expensive and time-consuming redesigns. When 2D modeling is employed, it typically involves labor-intensive manual workflows that convert 2D drawings into 3D models, resulting in inefficiencies and errors across design iterations. These workflows further suffer from poor software interoperability and dependence on proprietary software ecosystems, thereby contributing to schedule delays and cost overruns. This paper presents Alchemy, an autonomous framework that transforms 2D system definitions into Industry Foundation Classes (IFC)-compliant 3D building information models (BIMs) for expediting nuclear facility design at the conceptual preliminary phase. Using a model-based approach, the framework treats the 2D system diagram as the central reference model employed to automatically generate all subsequent outputs, ensuring consistency between the system definition and the resulting physical design. A web-based interface enables engineers to define hierarchical system topologies including associated equipment, geometric properties, and connectivity requirements. A two-phase equipment layout optimization algorithm automatically computes collision-free spatial configurations within predefined building envelopes. An artificial intelligence (AI)-assisted pipe routing module then generates orthogonal, collision-free routing paths, allowing the user to select either an A* search-based method or an Ant Colony Optimization (ACO)-based method. All outputs are authored natively in IFC format, relying on open-source technologies and standardized formats in order to ensure extensibility and eliminate proprietary software dependencies. The proposed framework is validated on two representative pressurized-water reactor (PWR)-based case studies, for which it autonomously generates IFC-compliant 3D models in minutes, drastically reducing workflows that typically require hours of manual effort. The generated model demonstrates topologically correct equipment placement, physically plausible spatial relationships, and collision-free pipe routing consistent with known PWR loop configurations. This work represents a foundational step toward digital engineering for nuclear facility preliminary design, with future ongoing development targeting design code compliance and expanded system complexity.

97 - MATHEMATICS AND COMPUTING↗

Public perceptions of wave energy development on the west coast of North America: Risks, benefits, and coastal attachment

While solar and wind energy continue to grow as significant sources of renewable energy, a global energy transition away from fossil fuels will require an expanding portfolio of generating resources. Marine renewable energy has the potential to contribute greatly in the coming decades, as the more predictable nature of wave energy can support the resiliency of the power grid and complement solar and inland wind generation. Yet, the broad deployment of marine energy technologies like wave energy will depend on public support, making it critical to identify the relevant factors associated with public attitudes and risk/benefit perceptions. This paper draws on social representations theory to specifically examine perceptions of wave energy on the west coast of North America, a site chosen because of the high suitability for wave energy generation and the fact that one of only three wave energy test sites in the world is under development off the coast of Oregon. Using an online survey in June 2020, we recruited a sample of 2000 respondents from California, Oregon, Washington, and British Columbia. We found a majority of respondents held positive attitudes to wave energy, but respondents also had low familiarity – with a quarter of respondents lacking sufficient information to form an opinion. We used logistic regression to identify factors correlated with wave energy attitudes, finding that respondents who were more supportive of wind and solar energy, more optimistic about new technology, and reported more familiarity with wave energy were significantly more likely to have a positive impression of wave energy. Respondents with higher levels of place attachment to coastal areas were more split, as they perceived higher benefits of wave energy – but also higher risks. Our results indicate broad appeal of wave energy on the west coast, but we caution policymakers and developers to not take initial siting processes for granted. As experience has shown for offshore wind, broad appeal does not guarantee a smooth siting process in a local context. Furthermore, the role of place attachment to coastal areas must be taken seriously or risk alienating local communities.

16 TIDAL AND WAVE POWER↗