Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dehydration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Divanadium substituted keggin [PV 2 W 10 O 40 ] on non-reducible supports-Al 2 O 3 and SiO 2 : synthesis, characterization, and catalytic properties for oxidative dehydrogenation of propane

Molecular metal oxide cluster, K 5 [α-1,2-PV 2 W 10 O 40 ] (PV 2 W 10 ), was found to have intrinsic catalytic activity for the oxidative dehydrogenation of propane with high selectivity (> 80%) to propylene at low propane conversion (0.3%). Synthesis of dispersed PV 2 W 10 in non-reducible supports, γ-Al 2 O 3 and SiO 2 , was done by incipient wetness impregnation. The supported catalysts were characterized by IR, Raman spectroscopy, nitrogen adsorption, x-ray powder diffraction (PXRD), elemental analysis, hydrogen temperature-programmed reduction (H 2 –TPR), and ammonia temperature-programmed desorption (NH 3 –TPD). Catalytic testing of the supported PV 2 W 10 at equimolar cluster concentration revealed that when supported in γ-Al 2 O 3 it is more active (sevenfold increase in propane conversion) but in SiO 2 it is more selective to propylene (94%). The observed performance was due to both an increase in reducibility and higher concentration of strong acid sites for PV 2 W 10 supported in γ-Al 2 O 3 versus SiO 2 . Lastly, PV 2 W10 was shown to remain intact under reaction conditions indicating its thermal and oxidative stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

A guayule C-repeat binding factor is highly activated in guayule under freezing temperature and enhances freezing tolerance when expressed in Arabidopsis thaliana

Natural Rubber (NR)-producing guayule (Parthenium argentatum Gray) has been developed as a new crop to diversify NR production. Guayule NR is mainly synthesized in its stem and is upregulated by cold temperatures. A guayule C-repeat binding factor 4 (PaCBF4) was highly expressed in cold-treated stem tissue, coinciding with active rubber biosynthesis and accumulation. Sequence alignments of PaCBF4 with other CBFs indicated that PaCBF4 contains DNA-binding domains responsible for regulating cold-regulated (COR) gene expression. Spatial gene expression profiling of PaCBF4 revealed that stems had the highest expression level among different organs examined. We further confirmed the function of PaCBF4 as regulator of cold-signaling processes by expressing it in the model plant Arabidopsis under a constitutive ubiquitin promoter from potato. Further, the resulting transgenic Arabidopsis lines expressing PaCBF4 turned on expression of a set of Arabidopsis COR genes under both room (24ºC) and cold (4ºC) temperatures, in contrast to the wild-type Arabidopsis that expressed these COR genes solely upon cold treatment. Furthermore, the transgenic plants displayed enhanced freezing tolerance at -5ºC, exhibiting a survival rate of 88–98% compared with 0% survival rate of wild-type plants. Our results suggest that PaCBF4 is a functional member of the guayule CBF gene family and plays a significant role in cold and freeze tolerance. Interestingly, overexpressing PaCBF4 in Arabidopsis did not affect the normal phenotype of the plant during vegetative and inflorescence growth, but the gene led to more undeveloped siliques after flowering.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Probing Acid–Base Properties of Anatase TiO 2 Nanoparticles with Dominant {001} and {101} Facets Using Methanol Chemisorption and Surface Reactions

In the present study, we investigate the surface acid-base properties of anatase TiO 2 nanomaterials with dominant {101} and {001} facets via methanol titrations. Two anatase nanoparticles, TiO 2 (101) and TiO 2 (001), with well-defined morphology are prepared. TiO 2 (101) is predominantly enclosed by the {101} facets (> 90%), and TiO 2 (001) contains ~46% {001} facets and ~54% {101} facets. Upon adsorption of methanol 423 K, DRIFTS measurements show that both molecular and dissociative adsorption occurs on TiO 2 (101), while dissociative adsorption dominates on TiO 2 (001). During methanol TPD, TiO 2 (001) mainly generates acid-base product dimethyl ether and thermal cracking products CO and H 2 , as anticipated. In contrast, substantial amounts of formaldehyde and methane also desorb from TiO 2 (101), suggesting strong participation of surface defects (e.g., oxygen vacancies).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

High-Temperature Pretreatment Effect on Co/SiO 2 Active Sites and Ethane Dehydrogenation

Here, we report the synthesis, optimization, and characterization of Co/SiO 2 for ethane nonoxidative dehydrogenation. Co/SiO 2 is synthesized via strong electrostatic adsorption using the widely available Co(NO 3 ) 2 as the precursor. We demonstrate that high-temperature pretreatment (900 °C) in an inert atmosphere can significantly enhance the initial activity of the Co/SiO 2 catalyst. X-ray absorption near-edge spectroscopy (XANES), temperature-programmed reduction (TPR), and high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) suggest that highly dispersed Co(II) clusters are more active than Co 0 or CoO x nanoparticles. Fourier transform infrared (FTIR) and isopropanol (IPA) temperature-programmed desorption and density functional theory (DFT) calculations suggest that high-temperature treatment significantly increases the density of active Lewis acid sites, possibly via surface dehydroxylation of the catalyst.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Reaction Mechanism of Vapor-Phase Formic Acid Decomposition over Platinum Catalysts: DFT, Reaction Kinetics Experiments, and Microkinetic Modeling

A combination of periodic density functional theory (DFT, PW91-GGA) calculations, reaction kinetics experiments, and mean-field microkinetic modeling is used to derive insights on the reaction mechanism and determine the nature of the active site under reaction conditions for the vapor-phase decomposition of formic acid (FA, HCOOH) over Pt/C catalysts. Microkinetic models formulated using DFT energetics derived on the clean Pt(100) and Pt(111) required large parameter adjustments to reproduce the experimentally measured apparent activation energies and reaction orders. Further, these models predicted high surface coverage of adsorbed carbon monoxide (CO*), inconsistent with the environment of the active site in the DFT calculations on the clean surfaces. Consequently, we reperformed DFT calculations for the entire reaction network on partially CO*-covered (4/9 monolayer, ML) Pt(111) and Pt(100). The resultant microkinetic models, with thermochemistry and kinetics explicitly dependent on CO* coverage, were able to reproduce the experimentally determined activation energies and reaction orders, in addition to being self-consistent in CO* coverage. Our results suggest that Pt(100) is likely poisoned by CO* under typical reaction conditions and does not contribute significantly to the experimentally observed reactivity. Instead, we find that Pt(111) better represents the active site for FA decomposition reaction on Pt/C catalysts. The optimized model on 4/9 ML CO*-covered Pt(111) suggests that the reaction occurs via the carboxyl (COOH*) intermediate and that the spectator CO*-assisted pathways play a significant role under reaction conditions. Lastly, this study underscores the importance of spectator species on the energetics and the mechanism of a catalytic reaction and their key role in developing a model that better addresses the nature of the active site under realistic catalytic reaction conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Spatially Aligned Binary Single-Site Catalyst on Defective SiO 2 for Cascading Reactions

Capitalizing on the success of single-atom catalysts (SACs), dual-atom catalysts (DACs) have emerged as a new frontier in heterogeneous catalysis. However, most SACs and DACs studies seek to uniformly distribute the catalytic sites on the support material, which can hinder their effectiveness in intricate multistep cascading reactions. Particularly, it is a grand challenge to precisely control the spatial distribution of two different single sites forming binary sites so that reactants and intermediates contact the catalytic sites in the exact sequence required by the reaction steps. Here, in this work, we report a new type of binary single-site catalyst, Cu 1 –Zr 1 @SiO 2 , with Cu 1 and Zr 1 sites spatially aligned with the reaction sequence of the cascade reactions. The catalyst is synthesized by a modified reverse microemulsion approach, with single Cu sites anchored by nonbridging oxygen hole centers, which were induced by doping single Zr sites into SiO 2 . Low-energy ion scattering spectroscopy (LEIS) reveals that the outermost surface of the catalyst contains only Cu single sites, while the Zr sites are dispersed in the bulk. The catalytic performance is demonstrated in ethanol conversion to butenes, a model cascade reaction which includes ethanol dehydrogenation and aldol condensation steps. The precisely spatially controlled binary sites enable ethanol to first undergo dehydrogenation to acetaldehyde on Cu sites, followed by aldol condensation of acetaldehyde on Zr sites. As a result, C 3+ olefins selectivity as high as 77.0% (56.0% selectivity of butenes) is achieved by suppressing ethylene formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Electrical Conductivity and Sound Velocities of Talc Under High Pressure and High Temperature Conditions and Application to the Subducting Cocos Plate

Talc is expected to be an important water carrier in Earth's upper mantle, and understanding its electrical and seismic properties under high pressure and temperature conditions is required to detect possible talc-rich regions in subduction zones imaged using geophysical observations. Here, we conducted acoustic and electrical experiments on natural talc aggregates at relevant pressure-temperature conditions. Compressional wave velocity (V p ) was measured using ultrasonic interferometry in a Paris-Edinburgh press at pressures up to 3.4 GPa and temperatures up to 873 K. Similar Vp values are obtained regardless of the initial crystallographic preferred orientation of the samples, which can be explained by talc grain reorientation during the experiment, with the (001) plane becoming perpendicular to the uniaxial compression axis. Electrical conductivity of the same starting material was determined using impedance spectroscopy in a multi-anvil press up to 6 GPa and 1263 K. Two conductivity jumps are observed, at ∼860–1025 K and ∼940–1080 K, depending on pressure, and interpreted as talc dehydroxylation and decomposition, respectively. Electrical anisotropy is observed at low temperature and decreases with increasing pressure (∼10 at 1.5 GPa and ∼2 at 3.5 GPa). Comparison of acoustic and electrical results with geophysical observations in central Mexico supports the presence of a talc-bearing layer atop the subducted Cocos plate.

Cocos plate↗
DOE OSTI2024

Next-Generation Desiccant-Based Gas Clothes Dryer Systems

The goal of the project is to develop an advanced gas clothes dryer system demonstrating significant improvements in fuel efficiency and drying performance compared to current gas clothes dryer technologies. The new system decouples latent and sensible loads to effectively utilize the latent heat associated with laundry moisture as an advantageous energy source. In other words, the system captures the waste latent heat from moisture produced during the fabric-drying process and reuses it to improve drying efficiency.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

Chloride Salt Purification by Reaction With Thionyl Chloride Vapors to Remove Oxygen, Oxygenated Compounds, and Hydroxides

Molten chloride salts (including MgCl 2 , KCl, NaCl, and ZnCl 2 ) are being considered for heat transfer media for renewable (solar) and nuclear power generators, as fuel carrier for nuclear reactors, and as thermal energy storage media. Impurities such as oxygen, hydroxides, moisture, and sulfur are known to negatively influence the corrosion of materials in contact with the salt (e.g., structural metals). Commercially available chloride salts come with a range of impurities. Before using the chloride salts at high temperature, it is desirable to remove the impurities to increase the performance of the salt and reduce corrosion. In this study, we tested the use of thionyl chloride vaporized into a stream of argon to react with oxygenated impurities in a mixture of MgCl 2 -KCl-NaCl, removing them as HCl and SO 2 . The reagent was bubbled through the salt when both above and below the melting point. The reaction was followed using thermocouple data from the salt and by Fourier transform infrared (FTIR) spectroscopy on the exhaust of the reactor. The reaction kinetics were followed by comparing the peaks from SO 2 product to SOCl 2 reagent in the FTIR spectra. The purity of the salt was assessed at the end of the purification process by x-ray diffraction and inductively coupled plasma analysis. Although the process was effective in removing the oxygen content of the mixture, ternary compounds were formed in the process, including KNiCl 3 and KMgCl 3 . The nickel in KNiCl 3 came from the reaction between the salt and the nickel vessel. Thus, these experiments suggest that improvements to the process must be made before using SOCl 2 vapors for the purification of chloride salts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗