Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “corrections”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

A geometric model of a V-slit Sun sensor correcting for spacecraft wobble

A V-Slit sun sensor is body-mounted on a spin-stabilized spacecraft. During injection from a parking or transfer orbit to some final orbit, the spacecraft may not be dynamically balanced. This may result in wobble about the spacecraft spin axis as the spin axis may not be aligned with the spacecraft's axis of symmetry. While the widely used models in Spacecraft Attitude Determination and Control, edited by Wertz, correct for separation, elevation, and azimuthal mounting biases, spacecraft wobble is not taken into consideration. A geometric approach is used to develop a method for measurement of the sun angle which corrects for the magnitude and phase of spacecraft wobble. The algorithm was implemented using a set of standard mathematical routines for spherical geometry on a unit sphere.

Mcmartin, W. P.↗
NASA NTRS1994

Spin glasses and error-correcting codes

In this article, we study a model for error-correcting codes that comes from spin glass theory and leads to both new codes and a new decoding technique. Using the theory of spin glasses, it has been proven that a simple construction yields a family of binary codes whose performance asymptotically approaches the Shannon bound for the Gaussian channel. The limit is approached as the number of information bits per codeword approaches infinity while the rate of the code approaches zero. Thus, the codes rapidly become impractical. We present simulation results that show the performance of a few manageable examples of these codes. In the correspondence that exists between spin glasses and error-correcting codes, the concept of a thermal average leads to a method of decoding that differs from the standard method of finding the most likely information sequence for a given received codeword. Whereas the standard method corresponds to calculating the thermal average at temperature zero, calculating the thermal average at a certain optimum temperature results instead in the sequence of most likely information bits. Since linear block codes and convolutional codes can be viewed as examples of spin glasses, this new decoding method can be used to decode these codes in a way that minimizes the bit error rate instead of the codeword error rate. We present simulation results that show a small improvement in bit error rate by using the thermal average technique.

Belongie, M. L.↗
NASA NTRS1994

On corrections to the Nambu action

We analyze the thickness-corrections to the Nambu walls, focussing on recent discussions on the subject. The presence of corrections depending on the Gaussian curvature and its implications are reviewed. We also highlight the consistency of the calculations, its limitations and the connection between alternative derivations.

Silveira, Vanda↗
NASA NTRS1995

Correction of thin cirrus effects in AVIRIS images using the sensitive 1.375-micron cirrus detecting channel

Using spectral imaging data acquired with the Airborne Visible Infrared Imaging Spectrometer (AVIRIS) from an ER-2 aircraft at 20 km altitude during various field programs, it was found that narrow channels near the center of the strong 1.38-micrometer water vapor band are very effective in detecting think cirrus clouds. Based on this observation from AVIRIS data, Gao and Kaufman proposed to put a channel centered at 1.375 micrometers with a width of 30 nm on the Moderate Resolution Imaging Spectrometer (MODIS) for remote sensing of cirrus clouds from space. The sensitivity of the 1.375-micrometer MODIS channel to detect thin cirrus clouds during the day time is expected to be one to two orders of magnitude better than the current infrared emission techniques. As a result, much larger fraction of the satellite data is expected to be identified as being covered by cirrus clouds, some of them so thin that their obscuration of the surface is very small. In order to make better studies of surface reflectance properties, thin cirrus effects must be removed from satellite images. Therefore, there is a need to study radiative properties of thin cirrus clouds, so that a strategy for correction or removal of the thin cirrus effects, similar to the correction of atmospheric aerosol effect, can be formed. In this extended abstract, we describe an empirical approach for removing/correcting thin cirrus effects in AVIRIS images using channels near 1.375 microns - one step beyond the detection of cirrus clouds using these channels.

Gao, Bo-Cai↗
NASA NTRS1994

Observations of SN 1987A with the COSTAR-corrected Faint Object Camera

New near-ultraviolet and visible (O III) observations of SN 1987A obtained 2511 and 2533 days after outburst with the Corrective Optics Space Telescope Axial Replacement (COSTAR) corrected Faint Object Camera (FOC) on board the Hubble Space Telescope (HST) are presented. Even though the supernova is now very faint (m approximately equal to 19), the new data are of dramatically higher quality than those obtained previously with the aberrated telescope. The images -- which are now no longer hampered by the spherical aberration halos of the two nearby companion stars -- reveal a well-resolved symmetrical expanding envelope that can be traced out to a radius of approximately equal to 275 mas or approximately equal to 9400 km/s in the near-UV. The apparent diameter of the ejecta has grown to 255 +/- 2 mas Full Width at Half Maximum (FWHM) in the near-UV and 167 +/- 5 mas (FWHM) in the visible, in close agreement with the expansion rates inferred from earlier FOC observations obtained on days 1275 and 1754. The improved shell-like crescent has started to form within the inner approximately equals 60 mas core of the nebula.

Jakobsen, P.↗
NASA NTRS1994

Tidal corrections in the TOPEX/POSEIDON geophysical data records

The aim of this paper is to give an assessment to TOPEX/POSEIDON data users of the two available oceanic tidal corrections, which are based on the Schwiderski model (SCH) and the Cartwright and Ray model (CR), respectively. Large instantaneous differences are observed between the two corrections, and use of either model may sometimes lead to inadequate understanding of the remaining oceanic signals. In this paper we give an objective comparison of SCH and CR models and point out the major features of both models. Our methodology is applicable to the validating and testing of future tide models that will soon be appearing.

Molines, J. M.↗
NASA NTRS1994

Correction to the luni-solar precession from very long baseline interferometry

The redetermination of the luni-solar precession is performed by using Very Long Baseline Interferometry (VLBI) catalogues of extragalactic radio sources containing positions at observation epochs which cover 9 years. The positions of the sources have been determined by the VLBI network of the Crustal Dynamics Project of NASA from measurements covering consecutive half year and one year intervals between 1981 and 1989. In the course of their reduction the International Astronomical Union (IAU) recommended precession terms were applied. On the assumption of an imperfection of the luni-solar precession it is expected that the positions of each source obtained at different epochs but uniformly reduced to the reference system J2000.0 exhibit an apparent proper motion. We attributed this motion tentatively to precession and solved for a correction of the luni-solar precession by making a least squares fit to the position differences between homonymous sources in the set of catalogues. The 18.6 yr terms of nutation entered the process as parameters the values of which were set by choice from the reservoir of recent determinations. Twenty-five sources contributed to the analysis with the effect that the annual and semi-annual catalogues contain 16 sources on the average. The analysis confirmed the slightly overestimated IAU value of the luni-solar precession yielding a mean correction of -3.59 +/- 1.14 mas/yr from the annual and -3.84 +/- 1.16 mas/yr from the semi-annual catalogues. We discuss these secular terms and their dependence on the adopted nutation terms.

Walter, H. G.↗
NASA NTRS1994

Correcting the distortion of images taken with the ultraviolet imaging telescope

The Ultraviolet Imaging Telescope (UIT) cameras include two-stage magnetically focused image intensifiers that introduce small but significant geometrical distortions into the data. These distortions, which create positional offsets as large as 25 arcsec at the field edges, are corrected by the procedure described here to 2-3 arcsec, approximately the resolution of the images. The distortion is measured by comparing and correcting UIT images to digitized Guidestar survey plates of the same fields. Two-dimensional third-order polynomials are used to model the distortion. The models assume that the distortion is an instrumental effect, independent of mission elapsed time and target, and that the effect of distortion is an instrumental effect, independent of mission elapsed time and target, and that the effect of distortion in the center of each field is minimal. The models are used to improve computed astrometric plate solutions and to remove the geometric distortion while transforming the image to a standard north-up, ease-left orientation.

Greason, M. R.↗
NASA NTRS1995

Correcting For Capacitance In Tests Of Solar Cells

Modified procedure for testing solar photovoltaic cells and modified software for processing test data provide corrections for effects of cell capacitance. Procedure and software needed because (a) some photovoltaic devices (for example, silicon solar cells with back-surface field region) store minority charge carriers in cell junction and thus exhibit significant capacitance, (b) capacitance affects current-vs.-voltage (I-V) measurements made when transient load connected to cell, and (c) transient load used in unmodified version of test procedure. Corrected I-V curve obtained in test of solar cell according to modified procedure approximates true cell voltage vs. cell current more closely.

Mueller, Robert L.↗
NASA NTRS1994

A method to compute SEU fault probabilities in memory arrays with error correction

With the increasing packing densities in VLSI technology, Single Event Upsets (SEU) due to cosmic radiations are becoming more of a critical issue in the design of space avionics systems. In this paper, a method is introduced to compute the fault (mishap) probability for a computer memory of size M words. It is assumed that a Hamming code is used for each word to provide single error correction. It is also assumed that every time a memory location is read, single errors are corrected. Memory is read randomly whose distribution is assumed to be known. In such a scenario, a mishap is defined as two SEU's corrupting the same memory location prior to a read. The paper introduces a method to compute the overall mishap probability for the entire memory for a mission duration of T hours.

Gercek, Gokhan↗
NASA NTRS1995

Modal Correction Method For Dynamically Induced Errors In Wind-Tunnel Model Attitude Measurements

This paper describes a method for correcting the dynamically induced bias errors in wind tunnel model attitude measurements using measured modal properties of the model system. At NASA Langley Research Center, the predominant instrumentation used to measure model attitude is a servo-accelerometer device that senses the model attitude with respect to the local vertical. Under smooth wind tunnel operating conditions, this inertial device can measure the model attitude with an accuracy of 0.01 degree. During wind tunnel tests when the model is responding at high dynamic amplitudes, the inertial device also senses the centrifugal acceleration associated with model vibration. This centrifugal acceleration results in a bias error in the model attitude measurement. A study of the response of a cantilevered model system to a simulated dynamic environment shows significant bias error in the model attitude measurement can occur and is vibration mode and amplitude dependent. For each vibration mode contributing to the bias error, the error is estimated from the measured modal properties and tangential accelerations at the model attitude device. Linear superposition is used to combine the bias estimates for individual modes to determine the overall bias error as a function of time. The modal correction model predicts the bias error to a high degree of accuracy for the vibration modes characterized in the simulated dynamic environment.

Buehrle, R. D.↗
NASA NTRS1996

Elevation correction factor for absolute pressure measurements

With the arrival of highly accurate multi-port pressure measurement systems, conditions that previously did not affect overall system accuracy must now be scrutinized closely. Errors caused by elevation differences between pressure sensing elements and model pressure taps can be quantified and corrected. With multi-port pressure measurement systems, the sensing elements are connected to pressure taps that may be many feet away. The measurement system may be at a different elevation than the pressure taps due to laboratory space or test article constraints. This difference produces a pressure gradient that is inversely proportional to height within the interface tube. The pressure at the bottom of the tube will be higher than the pressure at the top due to the weight of the tube's column of air. Tubes with higher pressures will exhibit larger absolute errors due to the higher air density. The above effect is well documented but has generally been taken into account with large elevations only. With error analysis techniques, the loss in accuracy from elevation can be easily quantified. Correction factors can be applied to maintain the high accuracies of new pressure measurement systems.

Panek, Joseph W.↗
NASA NTRS1995

Development of a Pressure Sensitive Paint System with Correction for Temperature Variation

Pressure Sensitive Paint (PSP) is known to provide a global image of pressure over a model surface. However, improvements in its accuracy and reliability are needed. Several factors contribute to the inaccuracy of PSP. One major factor is that luminescence is temperature dependent. To correct the luminescence of the pressure sensing component for changes in temperature, a temperature sensitive luminophore incorporated in the paint allows the user to measure both pressure and temperature simultaneously on the surface of a model. Magnesium Octaethylporphine (MgOEP) was used as a temperature sensing luminophore, with the pressure sensing luminophore, Platinum Octaethylporphine (PtOEP), to correct for temperature variations in model surface pressure measurements.

Simmons, Kantis A.↗
NASA NTRS1993

Relativistic Corrections to the Properties of the Alkali Fluorides

Relativistic corrections to the bond lengths, dissociation energies and harmonic frequencies of KF, RbF and CsF have been obtained at the self-consistent field level by dissociating to ions. The relativistic corrections to the bond lengths, harmonic frequencies and dissociation energies to the ions are very small, due to the ionic nature of these molecules and the similarity of the relativistic and nonrelativistic ionic radii.

Dyall, Kenneth G.↗
NASA NTRS1998

Some Comments on the Status of Shell Theory at the End of the 20th Century: Complaints and Correctives

This review is divided into complaints and correctives. Complaints are directed at: sloppy refereeing and editing; authors who fail to read or acknowledge what others have done; the mis-naming or mis-crediting of results; the misunderstanding and misuse of the Kirchhoff hypothesis; inflated claims of accuracy based on overly-simplified benchmark problems; the failure to appreciate the inherent errors in various shell models; the failure to appreciate that the physical response and mathematical structure of shell theory are fundamentally different from 3-dimensional elasticity; and the irrelevance of Cosserat-type theories. Correctives include a simple, straight-forward derivation of a general nonlinear dynamic shell theory with the following features: (1) the equations of motion and kinematics (and those of thermodynamics, if desired) are exact consequences of their 3-dimensional counterparts; (2) there are no asymptotic or series expansions through the thickness; (3) all approximations (including the Kirchhoff Hypothesis) occur in the constitutive relations; (4) in static problems, there is a mixed form of the governing equations involving a mixed-energy density and exhibiting remnants of the well-known static-geometric duality of linear theory which is numerically robust because the limiting cases of nonlinear membrane theory and inextensional bending theory fall out naturally. (These latter two special cases are known to produce numerical nightmares unless treated with great care); and (5) all equations may be expressed in coordinate-free form (although, sometimes, a hybrid form is shown to be superior).

Simmonds, James G.↗
NASA NTRS1979

Finite-field Calculations of Molecular Polarizabilities Using Field-Induced Polarization Functions: Second- and Third-order Perturbation Correlation Corrections to the Coupled Hartree-Fock Polarizability of H2O

Ordinary Rayleigh-Schroudinger perturbation theory with Moller-Plesset (RSMP) partitioning is used to calculate second- and third-order correlation corrections to the CHF polarizability and dipole moment of the water molecule by a finite-field procedure. Pade approximants are found to be useful in accelerating the convergence of the property perturbation expansions. Field-induced polarization functions suitable for polarizability calculations are determined. The average polarizability calculated, neglecting vibrational averaging, with Dunning's (9s5p/4s-4s2p/2s) contracted GTO basis set augmented by field-induced lslp2d/lp polarization functions is within 3 per cent of the experimental result. Correlation corrections to the dipole moment and polarizability of the water molecule calculated by the finite-field RSMP and single + double excitation CI(SDCI) methods for the same basis set are found to be in close agreement. The RSMP approach has the advantages of being size-consistent and of being capable of greater efficiency than the SCDI method. Comparative calculations carried out using Epstein-Nesbet partitioning show that through third order RSEN correlation perturbation expansions for the dipole moment and polarizability are less rapidly convergent than RSMP expansions. However, reasonable accord with RSMP results can be achieved by using Pade approximants to accelerate the convergence of RSEN energy perturbation expansions. The convergence of RSMP property correlation expansions based on the zeroth-order uncoupled-Hartree-Fock (UCHF) and coupled-Hartree-Fock (CHF) approximations are compared through third order. Whereas the CHF + RSMP expansions are for practical purposes fully converged, the UCHF + RSMP expansions are not adequately converged.

Langhoff, S. R.↗
NASA NTRS1994

In Operation Detection and Correction of Rotor Imbalance in Jet Engines Using Active Vibration Control

Jet Engines may experience severe vibration due to the sudden imbalance caused by blade failure. This research investigates employment of on board magnetic bearings or piezoelectric actuators to cancel these forces in flight. This operation requires identification of the source of the vibrations via an expert system, determination of the required phase angles and amplitudes for the correction forces, and application of the desired control signals to the magnetic bearings or piezo electric actuators. This paper will show the architecture of the software system, details of the control algorithm used for the sudden imbalance correction project described above, and the laboratory test results.

Manchala, Daniel W.↗
NASA NTRS1998

Using Ground Spectral Irradiance for Model Correction of AVIRIS Data

Over the last decade a series of techniques has been developed to correct hyperspectral imaging sensor data to apparent surface reflectance. The techniques range from the empirical line method that makes use of ground target measurements to model-based methods such as ATREM that derive parameters from the data themselves to convert radiance to reflectance, and combinations of the above. Here we describe a technique that combines ground measurements of spectral irradiance with existing radiative transfer models to derive the model equivalent of an empirical line method correction without the need for uniform ground targets of different reflectance.

Goetz, Alexander F. H.↗