Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “containment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

An Authorized Container Program at the Nevada Test Site

An Authorized User of Containers Program was implemented for National Security Technologies, LLC (NSTec), at the Nevada Test Site (NTS). This paper and the associated presentation will address NSTec’s lessons learned for implementing this program. It will describe some of the major difficulties in performing this activity and how these challenges were addressed to allow NSTec to use the model DT-23 containers.

42 ENGINEERING↗

Feasibility studies for the design of disposal vaults for multi-purpose containers (MPCs): construction, operation, ventilation and management of heat - 15175

The Nuclear Decommissioning Authority (NDA) subsidiary, Radioactive Waste Management Ltd (RWM) is responsible for the safe implementation of a Geological Disposal Facility (GDF) for radioactive waste in the UK. As part of their generic programme to underpin the planned designs for a GDF, work is ongoing to explore a range of possible geological disposal concepts. This work developed GDF concept designs for Multi-Purpose Containers (MPC) disposal in the generic host rock types considered: higher strength (crystalline), lower strength sedimentary (sedimentary / clay formations) and evaporite rocks. This paper is specific to concepts for the disposal of MPC for Pressurised Water Reactor (PWR) spent nuclear fuel (SF). The key outcomes of the feasibility studies to improve the understanding of the MPC disposal concept and the specific challenges to construct, operate, ventilate, manage heat and backfill associated with this concept are summarised in this paper. The management of the high loading of radiogenic heat (from 12 PWR SF assemblies in MPCs compared to 4 in 'standard' disposal containers) during an extended open phase (delayed backfilling of the disposal area) of up to 300 years was investigated. The concept designs developed demonstrate it is feasible to construct, operate and ventilate disposal vaults to accommodate open 'storage' periods required for transitional thermal decay of high heat generating waste in higher strength and lower strength sedimentary host rock types considered by RWM. This work focused on developing two contrasting disposal concepts which are applicable to both higher strength and lower strength rock environments; both of which illustrate how vault temperature, stability and groundwater inflows can be controlled to delay backfilling and allow MPC package thermal output to decrease. MPC disposal in evaporite rock does not require a cooling period due to its high thermal conductivity and favourable performance at higher temperatures; therefore the concept developed for this rock includes immediate backfilling of disposal tunnels. A clear understanding of the interactions and limitations associated with heat management during the open period was developed by investigation of a 'Heating Ventilation and Air-Conditioning System' (HVAC). It was concluded that removal of heat from the disposal tunnels / vaults is feasible, but introduces significant operational complexity. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Free-standing Liquids in a Resin Disposal Container - How Unidentified Legacy Issues and Decisions Can Affect Current Radwaste Processing Activities - 16605

On Monday, October 27, 2014 a radwaste and transportation specialist was informed that a condensate filter demineralizer (CFD) radwaste disposal container exceeded the radioactive waste disposal facility free-standing liquid requirement for acceptance for disposal (limit is 0.5% of waste volume or 5.6 gallons); 8.5 gallons was measured). As a result, on October 28, the plant was informed that our disposal site use permit was suspended, pending a point-of-origin inspection by the agreement state regulatory authority. This paper details the investigation conducted to identify causes, especially legacy issues one may not necessarily identify, and documents corrective actions taken to assure similar issues are not repeated. Actions taken to prevent recurrence have been successful. The five containers shipped, including 14-033, were verified dewatered and dried to comply with the disposal facility waste acceptance criteria. Although discoloration is viewed in the dewatering sight glass, milky color has not been viewed and the dewatering process has continued. Isolation of the lowest set of dewatering filter laterals for use at the end of the dewatering process has worked well and use of the dewatering verification filters has provided evidence that each CRF resin liner was successfully dewatered and dried. To date, 37 CFD liners have been successfully dewatered, dried, verified, transported to the disposal facility, and buried without incident. If similar issues are encountered, you should keep an open mind regarding causes including, but not limited to discussions with your vendor and conduct a search of past procedure revisions to gain additional insight regarding program/procedure changes and how they could have an effect on issues, which occur today.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Investigation of Inorganic Hydrophobic Filter Material for Nuclear Material Transportation and Storage Containers - 16640

Los Alamos National Laboratory has begun development of hydrophobic or super-hydrophobic inorganic filter materials that resist water ingress after exposure to radiation and/or elevated temperature. Filters that are currently available depend on carbon composites and/or organic polymers for their water resistant/hydrophobic properties to minimize water ingress. However, facility and transportation accident scenarios often include fire, impact and subsequent water spray or flooding conditions. A purely inorganic hydrophobic filter material could have enhanced resistance to fire and radiation damage, and continue to minimize water ingress after such an accident. Such filters could broaden the use of filtered containers in the transportation and storage of nuclear materials, and could have broader implications in other industrial applications. The goal is to create a porous inorganic material with hydrophobic properties that maintains or exceeds the current performance criteria for particulate filtration efficiency, pressure differential, air flow and hydrogen diffusion. The materials developed in this project will be evaluated for use as potential enhancements to the SAVY 4000 nuclear storage container that is becoming widely used around the DOE complex. This paper will describe the methods and results of this investigation. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Treatment of Problematic Reactive Metal Wastes Using the GeoMelt{sup R} In-Container Vitrification (ICV{sup TM}) Process - 18639

Decommissioning of sodium cooled reactors and fast reactor technologies have generated a number of reactive metal waste configurations that are problematic to treat and typically lack cost effective treatment methods and disposition options. As a result, Veolia Nuclear Solutions, under contract with Idaho National Laboratory (owned by the U.S. Department of Energy and managed and operated by Battelle Energy Alliance, LLC) demonstrated its GeoMelt{sup R} In-Container Vitrification (ICV){sup TM} technology to safely convert sodium metal to a non-reactive vitrified oxide form. The demonstration project, supported by glass formulation and crucible testing, consisted of a series of ICV{sup TM} melts that processed elemental sodium into stable non-reactive glass. Battelle Energy Alliance, LLC is evaluating the GeoMelt{sup R} technology as a means to safely and reliably convert radioactive reactive metal residues that contaminate components from sodium cooled reactors into waste forms that comply with existing disposition pathways. Reactive metal wastes at INL require treatment in order to remove the Resource Conservation and Recovery Act (RCRA) reactivity and ignitability characteristics in order to comply with land disposal restrictions. GeoMelt{sup R}, which is an alternative to other potential treatment approaches, provides a robust approach that chemically converts the reactive metals to an inert oxide while also immobilizing radionuclides in a vitrified waste form with durability equal to or better than vitrified nuclear fuel reprocessing wastes (very robust and inert waste forms). Most other treatment approaches generate hydrogen gas which is problematic. In 2016, Veolia Nuclear Solutions demonstrated the effectiveness of the GeoMelt{sup R} ICV{sup TM} process in deactivating reactive sodium metal. Crucible, bench-scale, and engineering-scale demonstrations were conducted on several surrogate waste configurations with various ratios of sodium metal and glassformers. Each ratio and configuration demonstrated complete deactivation of the surrogate sodium metal. Follow-on work in 2017 demonstrated the deactivation of reactive sodium by GeoMelt{sup R} ICV{sup TM} at a higher waste loading relative to previously demonstrated work performed in 2016. The higher waste loading optimized glass chemistry while enhancing the economical full-scale treatment of reactive metals. The GeoMelt{sup R} technology is a proven radioactive waste treatment technology capable of immobilizing radioactive wastes, including bulk rubble such as drums and other steel vessels usually without pretreatment. Utilizing the GeoMelt{sup R} technology to treat reactive metals eliminates pretreatment steps resulting from having to separate the reactive metal from steel containers or jackets as GeoMelt{sup R} can easily operate at temperatures sufficient to melt the steel and expose the reactive metal for treatment. Eliminating handling steps of reactive metals is a significant safety advantage since reactive metals are pyrophoric. The results of this two-year demonstration program and future planned activities are presented in the paper. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Corrosion Monitoring in an Irradiated/Used Fuel Dry Storage Container - 19193

A corrosion monitoring system was developed to monitor the corrosion behaviour of steel components embedded in the high density concrete of a Dry Storage Container (DSC). The DSC is a free-standing reinforced concrete container, with an inner carbon-steel liner and an outer carbon-steel shell, for the storage, on-site transfer and off-site transportation of irradiated Candu fuel. Normally, uncontaminated concrete is benign with regards to embedded steel components because high alkalinity in the concrete leads to formation of a passive film on the steel surface, which prevents excessive metal loss. However, corrosion of steel in concrete may be promoted by one or more of local concentration of chloride ions or local loss of alkalinity. For the DSC, it is recognized that the above mechanism(s) are unlikely, however, if any did exist, the corrosion mechanisms that could then occur would include corrosion of carbon steel components and stress corrosion cracking of 304L stainless steel components. In order to confirm that these unlikely events are not occurring, Ontario Power Generation has undertaken a project to investigate the corrosion behaviour of metallic components embedded in the DSC's high density concrete. A corrosion monitoring system that can be installed within the concrete space of a DSC was designed and installed to monitor changes in temperature, corrosion potential, corrosion rate, and electrochemical noise. The corrosion monitoring system was commissioned in July 2012, followed by the commencement of monitoring and measurements. The corrosion data, collected for the three years from year 2012 to 2015, were analyzed. It was concluded that the corrosion rates of both carbon steel and stainless steel within the DSC are very low and consistent with the intended minimum operational life of the DSC. The monitoring system as a whole has allowed a systematic and long term judgement regarding the conditions within the DSCs. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Strategic Implications of Active In-Container Vitrification Trials on Thermal Treatment of UK LLW and ILW - 19240

Thermal treatment is being considered in the UK for the treatment of a wide range of low and intermediate level wastes (LLW and ILW). To support this objective, a range of in-container vitrification trials were conducted to test a wide range of simulated waste streams. One of the major aims of these trials was to assess the disposability of the thermally treated products and the potential for using this process, either for management of wastes that currently have no clear disposal route, or for reducing the cost of disposal (through volume and hazard reduction). To this end, this paper considers the disposability of the disposal products produced during these treatment trials. Particular focus is given to the waste loading and volume reduction achieved by the process, based on the explicitly calculated values for each of the melts. A brief discussion of other disposability assessment criteria is also provided covering: Homogeneity (are radionuclides evenly distributed through the package): Porosity and permeability of the product; Water content; Potential for gas generation; Organic content; and chemical properties. It was observed that the highest waste loading and greatest volume reduction was achieved when treating wastes that could themselves act as glass formers, such as silicate minerals or soils, removing the need for addition of glass frit. Glass-forming wastes also produced homogenous products with low visible porosity and favourable chemical characteristics. Conversely treatment of wastes containing significant volumes of metal gave relatively poor volume reduction and a heterogenous product with visible porosity. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Radiation hardened RF transceiver for in-containment environment applications using commercial off the shelf components - 154

The ability to use wireless devices and other electronics in a radiation environment such as Nuclear Power Plant containment is mostly limited by the radiation sensitivity of these electronics. The benefits derived from wireless technology such as the reduction of the amount of cable needed for new sensors, the reduction of the labor associated with cable routing and the reduction or elimination of containment penetrations for new sensors is significant and well understood; unfortunately these benefits have not been fully accomplished yet because of numerous challenges, one being the radiation environment. Functional operation and radiation effects of a transceiver, which utilizes an integrated circuit system-on-chip, with a micro controller, serial driver, phase-locked loop, crystal oscillators and an RF amplifier, will be described. The second type of transceiver that will be discussed uses discrete components such as JFETs, MOSFETs and op-amps to perform the signal conditioning and RF transmission is also described. Operation capabilities and radiation effects for these two approaches as well as energy sources will be described and compared in detail. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

HEAT TRANSFER ANALYSIS FOR NUCLEAR WASTE SOLIDIFICATION CONTAINER

The Nuclear Nonproliferation Programs Design Authority is in the design stage of the Waste Solidification Building (WSB) for the treatment and solidification of the radioactive liquid waste streams generated by the Pit Disassembly and Conversion Facility (PDCF) and Mixed Oxide (MOX) Fuel Fabrication Facility (MFFF). The waste streams will be mixed with a cementitious dry mix in a 55-gallon waste container. Savannah River National Laboratory (SRNL) has been performing the testing and evaluations to support technical decisions for the WSB. Engineering Modeling & Simulation Group was requested to evaluate the thermal performance of the 55-gallon drum containing hydration heat source associated with the current baseline cement waste form. A transient axi-symmetric heat transfer model for the drum partially filled with waste form cement has been developed and heat transfer calculations performed for the baseline design configurations. For this case, 65 percent of the drum volume was assumed to be filled with the waste form, which has transient hydration heat source, as one of the baseline conditions. A series of modeling calculations has been performed using a computational heat transfer approach. The baseline modeling results show that the time to reach the maximum temperature of the 65 percent filled drum is about 32 hours when a 43 C initial cement temperature is assumed to be cooled by natural convection with 27 C external air. In addition, the results computed by the present model were compared with analytical solutions. The modeling results will be benchmarked against the prototypic test results. The verified model will be used for the evaluation of the thermal performance for the WSB drum. Detailed results and the cases considered in the calculations will be discussed here.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Tailored Persistent Radical‐containing Heterotrimetal‐Organic Framework for Boosting Efficiency of Visible/NIR Light‐driven Photocatalytic CO 2 Reduction

Abstract Promoting light absorption range of photocatalysts is of great significance to improve solar light‐driven photocatalytic CO 2 reduction efficiency. Herein, a new viologen‐based multicomponent heterotrimetallic metal–organic framework (MOF) [Cu 3 Th 6 ( µ 3 ‐O) 4 ( µ 3 ‐OH) 4 (cpb) 12 ][Fe III (CN) 6 ] 6 (IHEP‐14) with an unprecedented (6, 18)‐connected she ‐ d topology is presented. Upon UV irradiation, this MOF undergoes ligand and iron photoreduction, and a single‐crystal‐to‐single‐crystal transformation to generate persistent radical‐containing MOF [Cu 3 Th 6 ( µ 3 ‐O) 4 ( µ 3 ‐OH) 4 (cpb • ) 12 ][Fe II (CN) 6 ] 6 (IHEP‐15). This radical‐containing MOF shows excellent stability without fading after at least 2 months in air. Besides extending the photoabsorption to a wider wavelength range covering from 200 to 2,500 nm, the generation of persistent radical in IHEP‐15 also largely enhances its CO 2 adsorption capacity by a factor of three due to the strong affinity between π orbital of the radical and the π system of CO 2 . These attributes endow IHEP‐15 with excellent visible/NIR light‐driven CO 2 photoreduction activity, with CO production rates under visible and NIR irradiation of 570.3 and 209.3 µmol h −1 g −1 , respectively. Notably, the latter is a record high for NIR‐induced CO production among all MOFs reported so far.

Hu, Kong‐Qiu↗

Role of Histidine‐Containing Peptoids in Accelerating the Kinetics of Calcite Growth

Carbonate mineralization, the conversion of CO 2 into stable, thermodynamically favorable carbonate minerals, offers a promising strategy for permanent and environmentally friendly carbon storage, with minimal risk of long-term leakage and minimal monitoring requirements. Drawing inspiration from carbonic anhydrase (CA), a family of zinc-containing metalloenzymes that catalyze the hydration of CO 2 to bicarbonate and promote carbonate precipitation, a class of histidine-containing peptoids was designed that is capable of coordinating with Zn 2+ ions to act as CA mimetics for accelerating calcite step growth. In situ atomic force microscopy (AFM) measurements reveal that these peptoids significantly enhance step advancement, with a more pronounced effect observed when combined with Zn 2+ ions and under higher calcium-to-carbonate activity ratios, indicating that peptoids facilitate the incorporation of CO 3 2− ions at step edges. Solution NMR and 3D atomic force microscopy (3D AFM) analyses show that the coordination of peptoids with Zn 2+ promotes both the deprotonation of HCO 3 − to CO 3 2− and restructures the interfacial hydration layers of calcite, collectively lowering the activation barrier for step growth. These findings establish a design framework for sequence-defined polymers to regulate carbonate mineralization, offering promising applications in CO 2 capture and long-term storage.

CO2 mineralization↗

Lithium‐Containing Hybrid SEI Layer Enabling High Mass Loading and Anode‐Less Sodium Metal Batteries

Abstract The continuous rupturing and rebuilding of unstable solid electrolyte interphase (SEI) layer during cycling would block Na + diffusion and induce Na dendrite formation, ultimately limiting the practical application of high‐energy‐density sodium metal batteries. Herein, a hybrid SEI layer containing Li‐species is dexterously constructed on the surface of sodium metal anode. Li‐containing inorganic components (Li 3 N, LiF, and Li 2 CO 3 ) are introduced to stabilize the Na/electrolyte interface and enhance the mechanical and diffusion kinetic properties of the SEI layer, which can reduce the side reactions and gas generation, regulate Na + flux during cycling and promote rapid Na + migration for uniform dendrite‐free Na deposition. As a result, the constructed Na symmetric cells achieve low overpotential and long cycle life of 5900, 1800, and 500 h at current densities of 3, 10, and 30 mA cm −2 , respectively. Furthermore, the full cells paired with the Na₃V₂(PO₄)₃ cathode demonstrate high specific capacity and excellent cycle stability, even at an ultra‐high cathode loading of 39.3 mg cm −2 and a low N/P ratio (negative/positive electrode capacity ratio of 1.21).

Xia, Li [State Key Laboratory of Physical Chemistr↗

Lithium‐Containing Hybrid SEI Layer Enabling High Mass Loading and Anode‐Less Sodium Metal Batteries

The continuous rupturing and rebuilding of unstable solid electrolyte interphase (SEI) layer during cycling would block Na + diffusion and induce Na dendrite formation, ultimately limiting the practical application of high-energy-density sodium metal batteries. Herein, a hybrid SEI layer containing Li-species is dexterously constructed on the surface of sodium metal anode. Li-containing inorganic components (Li 3 N, LiF, and Li 2 CO 3 ) are introduced to stabilize the Na/electrolyte interface and enhance the mechanical and diffusion kinetic properties of the SEI layer, which can reduce the side reactions and gas generation, regulate Na + flux during cycling and promote rapid Na + migration for uniform dendrite-free Na deposition. As a result, the constructed Na symmetric cells achieve low overpotential and long cycle life of 5900, 1800, and 500 h at current densities of 3, 10, and 30 mA cm −2 , respectively. Furthermore, the full cells paired with the Na₃V₂(PO₄)₃ cathode demonstrate high specific capacity and excellent cycle stability, even at an ultra-high cathode loading of 39.3 mg cm −2 and a low N/P ratio (negative/positive electrode capacity ratio of 1.21).

Diffusion kinetic↗

Characterization of a Mo-Nitrogenase Variant Containing a Citrate-Substituted Cofactor

Nitrogenase converts N 2 to NH 3 , and CO to hydrocarbons, at its cofactor site. In this work, we report a biochemical and spectroscopic characterization of a Mo-nitrogenase variant expressed in an Azotobacter vinelandii strain containing a deletion of nifV, the gene encoding the homocitrate synthase. Designated NifDK Cit , the catalytic component of this Mo-nitrogenase variant contains a citrate-substituted cofactor analogue. Activity analysis of NifDK Cit reveals a shift of CO reduction from H 2 evolution toward hydrocarbon formation and an opposite shift of N 2 reduction from NH 3 formation toward H 2 evolution. Consistent with a shift in the Mo K-edge energy of NifDK Cit relative to that of its wild-type counterpart, EPR analysis demonstrates a broadening of the line-shape and a decrease in the intensity of the cofactor-originated S=3/2 signal, suggesting a change in the spin properties of the cofactor upon citrate substitution. These observations point to a crucial role of homocitrate in substrate reduction by nitrogenase and the possibility to tune product profiles of nitrogenase reactions via organic ligand substitution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

RNA oligomers at atomic resolution containing 1‐methylpseudouridine, an essential building block of mRNA vaccines

Abstract All widely used mRNA vaccines against COVID‐19 contain in their sequence 1‐methylpseudouridine ( m1Ψ ) instead of uridine. In this publication, we report two high resolution crystal structures (at up to 1.01 and 1.32 Å, respectively) of one such double‐stranded 12‐mer RNA sequence crystallized in two crystal forms. The structures are compared with similar structures which do not contain this modification. Additionally, the X‐ray structure of 1‐methyl‐pseudouridine itself was determined.

Nievergelt, Philipp↗

Rhizosphere bacteria containing ACC deaminase decrease root ethylene emission and improve maize root growth with localized nutrient supply

Abstract Localized nutrient supply can enhance maize root proliferation, but also increase root ethylene production. Whether engineering ethylene signalling in the rhizosphere can further enhance root growth and nutrient uptake remains unknown. Here, field and column experiments for maize ( Zea mays . L) were designed as different nutrient treatments (broadcast or localized nutrient supply containing ammonium and phosphorus) with or without inoculation with rhizobacterium Variovorax paradoxus 5C‐2 containing the 1‐aminocyclopropane‐1‐carboxylate (ACC) deaminase. Rhizobacterial inoculation increased shoot biomass by 12% and root length density by 50% with localized nutrient supply. Meanwhile, localized nutrient supply increased root ethylene production by 54% compared with broadcast, and rhizobacterial inoculation prevented the increase in root ethylene. Reduced root ethylene production following V. paradoxus 5C‐2 inoculation was highly associated with a greater proportion of fine root proliferation under localized nutrient supply, which may account for the increased nitrogen and phosphorus uptake. Our work sheds light on the understanding of the interactions between root and microbe through taking hormone into consideration to dissect the relationship between below ground and above ground. It is useful to explore the strategy of soil–crop management by introducing rhizosphere microorganisms to regulate plant ethylene signal and then benefit sustainable agriculture.

Jin, Kemo↗

Protein3D: Enabling analysis and extraction of metal‐containing sites from the Protein Data Bank with molSimplify

Abstract Metalloenzymes catalyze a wide range of chemical transformations, with the active site residues playing a key role in modulating chemical reactivity and selectivity. Unlike smaller synthetic catalysts, a metalloenzyme active site is embedded in a larger protein, which makes interrogation of electronic properties and geometric features with quantum mechanical calculations challenging. Here we implement the ability to fetch crystallographic structures from the Protein Data Bank and analyze the metal binding sites in the program molSimplify. We show the usefulness of the newly created protein3D class to extract the local environment around non‐heme iron enzymes containing a two histidine motif and prepare 372 structures for quantum mechanical calculations. Our implementation of protein3D serves to expand the range of systems molSimplify can be used to analyze and will enable high‐throughput study of metal‐containing active sites in proteins.

Edholm, Freya↗

Impacts of Disulfide‐Containing Monomers in Alternating Diene Metathesis Polymerization

ABSTRACT Among the classes of synthetic polymers, disulfide‐containing structures offer unique opportunities due to their accessibility to redox chemistry that allows for degradation or reversible disulfide formation and exchange under mild conditions. Here, we examine the role of disulfides in olefin metathesis polymerization, specifically alternating diene metathesis (ALTMET) polymerization, for synthesizing unsaturated polyolefins with embedded disulfides. Our synthetic strategy hinged on the use of α,ω‐diacrylate monomers, including those connected by a disulfide unit, via copolymerization by the ALTMET mechanism to yield copolymers containing a range of disulfide content. In addition, the potential impacts of sulfur‐ruthenium interactions on the ALTMET process were investigated spectroscopically, while the degradation of the resultant polymers was affected by mild reducing agents. Overall, this study contributes to the development of degradable synthetic polymers using olefin metathesis methods, with an increased understanding of the potential for further use of disulfide groups in such metathesis reactions.

Lee, Kyoungwon↗