Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “conclusions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Microstructure‐Dependent Sodium Storage Mechanisms in Hard Carbon Anodes

Sustainable energy storage is essential to support the transition to renewables and meet the increasing demand for energy. Sodium‐ion batteries (NIBs) are attractive for grid‐scale energy storage due to the abundance and low cost of sodium, sustainability of other battery components, and electrochemical performance. Hard carbon (HC) is a leading anode material for NIBs, but its complex microstructure complicates the understanding of sodium storage mechanisms. Using X‐ray total scattering and density functional theory calculations, this study clarifies how HC's microstructural variations influence sodium storage across the slope (high potential) and plateau (low potential) regions of the potential capacity curve. In the slope region, sodium initially adsorbs at high‐binding energy defect sites and subsequently intercalates between graphene layers, adsorbing at low‐binding energy defect sites, correlating with different slopes observed during initial sodiation. Initial irreversibility arises from sodium trapping at surface defects and solid electrolyte interface formation. In the plateau region, sodium simultaneously intercalates and fills pores, influenced by pore size, interlayer spacing, and defect concentration. HCs with larger pore sizes form larger sodium clusters. In conclusion, the proposed mechanism underscores the role of microstructure engineering in enhancing HC performance and advancing NIBs for grid‐scale energy storage.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Decoding Antenna Behavior in Metal—Organic Frameworks

Metal–organic frameworks (MOFs) define a solid-state platform for developing artificial photosystems. Efficient anisotropic exciton migrations in these frameworks entail “antenna behavior” that can power up the distal interior reaction centers (RC), driving charge separation between donor-acceptor pairs. Reminiscent of the natural light-harvesting complex, such processes can achieve high quantum yield by exploiting the vast interior surface of the porous crystallites. It is important to understand the optimum positioning of the RC site relative to the anisotropic exciton migration path within these frameworks. The efficiency of such antenna behavior is probed here through Stern–Volmer (SV) type analysis with a series of node-anchored redox quenchers, ferrocene-carboxylate, ferrocene acetate, and dinitrobenzoate. Decoding various intrinsic processes, this work constructs a revised SV formalism in solid assembly that hosts ultrafast anisotropic exciton migration to account for the intrinsic exciton hopping rate from the extrinsic electron transfer rate, and the dimension of effective quenching. In conclusion, this transformative understanding can be applied to other relevant solid-state assemblies.

Saha, Bapan [Southern Illinois University, Carbond↗
DOE OSTI2025

Tailoring a 3D Covalent Organic Framework Toward Facile Functionalization

Three-dimensional covalent organic frameworks (3D COFs) are notably crystalline and stable, but their architectures and monomer structures make them difficult to functionalize. Here, a new strategy is presented to render COF-300 and other imine-linked frameworks amenable to facile functionalization in the last step of synthesis. By reducing the imine linkages to secondary amines and appending them with acetyl halide groups, the linkages are converted to electrophiles that can be readily reacted with nucleophilic guests. This route yields eight new COF-300 derivatives, bearing chloroacetyl, bromoacetyl, azide, cyano, amino, hydroxyl, methoxy, or thiomethyl groups appended to the inter-monomer linkages. The new materials are characterized through solid-state NMR, infrared spectroscopy, and powder X-ray diffraction, among other techniques, finding that the reported linkage transformations proceed to complete conversion while retaining the crystallinity of the materials. Microcrystal electron diffraction (microED) data are used to solve the evacuated structure of the amine-linked framework COF-300-AR for the first time, providing conclusive evidence of this framework's guest-induced phase change, along with the structure of the new framework COF-300-NH 2 . Finally, COF-300-NH 2 is shown to have significantly improved adsorption capacity for CO 2 and perfluoroalkyl substances (PFAS), highlighting the benefits of this synthetic strategy for the generation of customized adsorbents.

COF-300↗
DOE OSTI2021

Imaging Secondary Electron Emission from a Single Atomic Layer

Graphene-based devices hold promise for a wide range of technological applications. Yet characterizing the structure and the electrical properties of a material that is only one atomic layer thick still poses technical challenges. Recent investigations indicate that secondary-electron electron-beam-induced current (SE-EBIC) imaging can reveal subtle details regarding electrical conductivity and electron transport with high spatial resolution. Here, it is shown that the SEEBIC imaging mode can be used to detect suspended single layers of graphene and distinguish between different numbers of layers. Pristine and contaminated areas of graphene are also compared to show that pristine graphene exhibits a substantially lower SE yield than contaminated regions. In conclusion, this SEEBIC imaging mode may provide valuable information for the engineering of surface coatings where SE yield is a priority.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Correlation of Processing and Structure in an Ethylene‐Glycol Side‐Chain Modified Polythiophene via Combined X‐Ray Scattering and 4D Scanning Transmission Electron Microscopy

The results of a combined grazing incidence wide-angle X-ray scattering (GIWAXS) and 4D scanning transmission microscopy (4D-STEM) analysis of the effects of thermal processing on poly(3[2-(2-methoxyethoxy)ethoxy]-methylthiophene-2,5-diyl) are reported, a conjugated semiconducting polymer used as the active layer in organic electrochemical transistor devices. GIWAXS provides a measure of overall crystallinity in the film, while 4D-STEM produces real-space maps of the morphology and orientation of individual crystallites along with their spatial extent and distribution. The sensitivity of the 4D-STEM detector allows for collection of electron diffraction patterns at each position in an image scan while limiting the imparted electron dose to below the damage threshold. In conclusion, the effects of heat treatment on the distribution and type of crystallites present in the films is determined.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Imaging Bias‐Driven Domain Wall Motion With Scanning Oscillator Piezoresponse Force Microscopy

Understanding ferroelectric domain wall dynamics at the nanoscale across a broad range of timescales requires measuring domain wall position under different applied electric fields. The success of piezoresponse force microscopy (PFM) as a tool to apply local electric fields at different positions and imaging their changing position, together with the information obtained from associated switching spectroscopies has fueled numerous studies of the dynamics of ferroelectric domains to determine the impact of intrinsic parameters such as crystalline order, defects and pinning centers, as well as boundary conditions such as environment. However, the investigation of sub-coercive reversible domain wall vibrational modes requires the development of new tools that enable visualizing domain wall motion under varying applied fields with high temporal and spatial resolution while also accounting for spurious electrostatic effects. Here, scanning oscillator piezoresponse force microscopy extends the investigation of domain wall dynamics to new regimes, providing direct visualization of domain wall position as a function of an external electric field that varies in time and location. In conclusion, this enables studying the energetics of field-driven ferroelectric domain wall motion, which is shown to obey a thermally activated flow regime in the millisecond timescale.

Piezoresponse Force Microscopy↗
DOE OSTI2023

Thermal Performance of Perovskite-Based Photovoltaics for Operation in Low Earth Orbit

Perovskite-based photovoltaics are attractive for applications in space. The space environment is harsh with ionizing radiation, atomic oxygen, UV radiation, extreme temperatures, and thermal cycling. Herein, the thermal performance of perovskite active layer and perovskite photovoltaic devices in low earth orbit is analyzed. A 1 μm silicon oxide layer coupled with 500 nm zirconia thin film aid in cell thermal management is determined. The residual stresses between various layers in a device are modeled and it is proved that thermally induced mechanical failure of the perovskite (time > 460 years) is unlikely during operating lifetime of any mission. In conclusion, target power conversion efficiencies are also shared to manage maximum operating temperature of a perovskite-based device.

14 SOLAR ENERGY↗
DOE OSTI2024

Influence of Rare Earth Ce Additions on Microstructure and Mechanical Properties of Experimental Pipeline Steels

Herein, the effect of Ce additions ranging from 57 to 263 ppm is evaluated for an experimental pipeline steel. Compared to the Ce-free steel, progressive Ce additions result in a slightly refined microstructure, significantly improve transverse impact properties, and slightly increase strength. All these observations can be attributed to the gradual transformation of Mn sulfide and Mn–Si–Al oxide inclusions to Ce-containing oxide/sulfides. In particular, the inclusions consist exclusively of sub-5 μm spherical Ce 2 O 2 S particles upon near-stoichiometric additions of Ce, considering the oxygen and sulfur impurity level of the steel. In conclusion, the results suggest that Ce is a potentially promising alloying addition for next-generation pipeline steels by replacing overtly deleterious inclusions with potentially beneficial ones.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Enhancing Mechanical Properties of Carbon–Silicon Steel through Two–Stage Quenching and Partitioning with Bainitic Transformation: Ultimate Tensile Strength of 1875 MPa and Total Elongation of 8.03%

To achieve the desired microstructural properties, the ongoing development and innovation in new structural steels require novel thermal processing. This study aims to improve the mechanical properties of a commercial spring carbon–silicon steel by tailoring its microstructure through a process involving quenching and partitioning (Q&P) followed by bainitic transformation. A two–stage Q&P process is proposed to generate a nanoscale dispersion of stable retained austenite and carbides within the tempered martensite and bainite microstructure. The resulting tensile properties demonstrate a yield strength of 1280 MPa, an ultimate tensile strength of 1875 MPa, and a total elongation of 8.03%. These values surpass those of conventional spring 9254 steel, highlighting the effectiveness of the thermal treatment design. Microstructure analysis reveals the presence of tempered martensite, bainite sheaves, nanoscale carbides, and aggregates of retained austenite. Moreover, the resulting body–centered cubic matrix exhibits minimal lattice tetragonality of ≈1.0051, coupled with stable retained austenite featuring a carbon concentration of ≈3.42 ± 0.5 wt%, resulting in outstanding strength–ductility properties. In conclusion, these findings indicate that the proposed two–stage Q&P process, followed by bainitic transformation, significantly enhances the mechanical properties of carbon–silicon steels, making it a promising candidate for high–performance spring applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Quantification of Swelling in Hematite Pellets Reduced Using Hydrogen–Nitrogen Gas Mixture

Iron ore pellets are reduced in a 50%H 2 –50%N 2 1 atm gas mixture at 750, 800, 850, 900, and 950 °C while simultaneously documenting swelling (change in pellet radius) and weight change. Swelling increases with increasing temperature, with catastrophic swelling (>20% of reduction swelling index) observed at 850, 900, and 950 °C. As the pellet is reduced, the pellet radius increases until 40–50% reduction is achieved, followed by a decrease in diameter beyond 40–50% reduction at 750 and 850 °C. At 950 °C, the pellet radius continues to increase with additional pellet reduction without any subsequent decrease in diameter. Scanning electron microscopy (SEM) analysis shows that the neighboring grains inside the pellet sinter together at 750 and 850 °C, whereas the individual grains sinter internally at 950 °C. SEM analysis and observations suggest that the reduction process at 750 and 850 °C can be approximated as a topochemical reaction process, while the reduction process at 950 °C can no longer be approximated as a topochemical reaction process. In conclusion, an empirical equation for the radius of the pellet is derived with fitting parameters dependent on temperature and the degree of reduction of the pellet undergoing reduction based on the experimental data.

08 HYDROGEN↗
DOE OSTI2025

Elucidating Pore Network Evolution in Laboratory‐ and Shaft‐Furnace Hydrogen‐Reduced Iron Pellets Using Nanotomographic Characterization

Direct reduced iron (DRI) is an increasingly important feedstock for modern steelmaking. Fundamental research into DRI properties is limited by the discrepancy between the behavior of industrially produced pellets and laboratory‐produced pellets, leading to nongeneralizable conclusions from laboratory work. Here, in this study, a detailed nano‐computed tomographic characterization of ore pellets, hydrogen DRI reduced in a pilot‐scale shaft furnace, and laboratory‐reduced DRI is presented to better understand the microstructurally influenced property differences between the two. The shaft‐furnace‐reduced pellets show lower overall porosity but larger average pore volume thickness and solid volume thickness than the laboratory‐reduced pellets. This effect is attributed to increased sintering behavior in the shaft furnace case. All pellet types show almost entirely connected pore volumes. The tortuosity of the pores is shown to increase with a degree of reduction, though the shaft furnace pellets show lower tortuosity than the laboratory‐reduced pellets. Again, this difference is attributed to the larger pore volume thickness for shaft‐furnace‐reduced pellets.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Safe passage of American Eels through a novel hydropower turbine

Abstract Objective Study the effects of downstream passage through a novel turbine designed for fish safety, the Restoration Hydro Turbine (RHT), on American Eels Anguilla rostrata in a recirculating turbine test facility. Methods A 55‐cm‐diameter RHT was operated under 10 m of hydraulic head and 667 revolutions/min. In total, 131 eels were passed through the turbine and 43 eels were used as experimental controls (length = 33.9–65.5 cm). High‐speed video of passage through the runner region was captured for 89% of turbine‐passed eels, and injury and behavioral effects were recorded immediately before and after passage, as well as after a 48‐h holding period. A subset of 37 eels was additionally examined with X‐ray imaging for internal injuries. Result The 48‐h survival rate for both treatment and control groups was 100%, with no major internal or external injuries present after the holding period. Conclusion This is a substantial improvement over eel survival rates through conventional Kaplan and Francis turbines, which may range from 40% to 95%, and suggests that hydropower turbines designed for safe downstream fish passage could be implemented without major impacts to eels.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

The effect of reducing dietary lipid and food availability on precocious male maturation in Chinook Salmon: A production-scale hatchery experiment

Abstract Objective Age of maturation in Chinook Salmon Oncorhynchus tshawytscha is phenotypically plastic, influenced by both genotype and environmental factors, including the availability and composition of the diet. Salmon hatchery programs often rear fish under accelerated growth regimes using high-lipid diets that can result in earlier age at maturity, including increased prevalence of age-2 males (minijacks). The goal of this investigation was to compare alternative dietary regimes to mitigate for this shift in age at maturity in hatchery-reared Umatilla River fall Chinook Salmon. Methods Juvenile fish were reared at Bonneville Hatchery, Oregon, under four dietary treatments across four replicate brood years. Dietary treatments included two feeding frequencies (standard [fed 7 days/week] and reduced [fed 4 days/week]) and two dietary lipid levels (standard [18%] and reduced [12%]) in a 2 × 2 factorial design. Dietary treatments were applied for approximately 9 months, beginning in March (a month after fry emergence) and lasting until December of the first year, after which all fish were reared on the standard feeding regime (7 days–18%) until the time of release the following spring as yearlings. Result We observed significant interannual variation in the proportion of minijacks produced among dietary treatments. For all brood years, decreasing the feeding frequency from 7 to 4 days/week reduced the proportion minijacks by 35.9%, and lowering dietary lipid from 18% to 12% reduced the proportion minijacks by 30%. The combined effects of reducing the feeding frequency and lowering dietary lipid were additive, reducing the proportion minijacks by 65.5% compared to the standard rearing regime. Growth and energetic indices were monitored throughout and confirmed findings from previous laboratory-based studies indicating that physiological status 10–12 months prior to spawn timing is important for the “decision” to mature. Conclusion Results of this investigation provide useful insights for optimizing rearing regimes for the Umatilla River program and other Chinook Salmon hatchery programs.

Harstad, Deborah L. (ORCID:0000000202676085)↗
DOE OSTI2023

Demographic and genetic consequences of a steelhead supplementation program

Abstract Objective Supplementation of naturally spawning populations by the addition of hatchery-spawned individuals is commonly conducted for recovery of threatened and endangered populations and to support harvest opportunities. Our objective was to evaluate whether the use of a juvenile captive broodstock and an integrated paradigm could increase returns of steelhead, the anadromous form of Rainbow Trout Oncorhynchus mykiss, while avoiding negative genetic impacts commonly associated with hatchery propagation. Methods We analyzed 291 genetic markers in adult steelhead returning to an integrated population in southwest Washington over the course of 15 years. Reproductive success (RS) of fish spawning in the natural environment was evaluated by origin (hatchery versus natural) and return year. Data were then pooled over years to maximize sample sizes for comparing RS estimates among groups (i.e., estimation of relative reproductive success [RRS]). Result We observed a weak relationship between RS and origin (male p = 0.347; female p = 0.066), but a significant relationship between RS and return year (male p < 0.001, η2 = 0.896; female p ⟨ 0.001, η2 = 0.867) (i.e., hatchery- and natural-origin fish did well or poorly together each year). Estimates of RRS for fish spawned in the hatchery ranged from 2.4 to 6.4, indicating that fish spawned in the hatchery produced more returning adult progeny than did fish allowed to spawn in the natural environment. Estimates of RRS were ⟨1.0 for hatchery-origin fish spawning in the natural environment, but the difference was nonsignificant for males and marginally significant for females. Hatchery-origin fish exhibited reduced genetic diversity as well as evidence of increased temporal population structure. Conclusion We conclude that the program was successful in achieving an increase in adult returns but not in avoiding negative genetic effects on the population and that any lasting impacts of supplementation remain to be determined.

Smith, Christian T. (ORCID:0000000240522669)↗
DOE OSTI2024

Population assignment of migratory Westslope Cutthroat Trout (WCT) in the Clark Fork–Pend Oreille River basin

Abstract Objective The Clark Fork–Pend Oreille River basin of northeastern Washington and the Idaho Panhandle historically supported a robust metapopulation of the Westslope Cutthroat Trout (WCT) Oncorhynchus lewisi, a western native salmonid of high cultural and economic value. The construction of impassible hydroelectric dams and smaller instream barriers has prevented the return of migratory WCT to spawning tributaries, leading to the fragmentation of this metapopulation over the past 100 years. One such impassible barrier is Albeni Falls Dam (AFD) near Newport, Washington, which was completed without fish passage capabilities in 1955. We sought to examine large-scale genetic patterns in the study area and determine the most likely spawning tributary of origin for migratory WCT captured below AFD. Methods We created a genetic baseline representative of populations within the Clark Fork–Pend Oreille River basin from upstream and downstream of the dam using 191 biallelic single-nucleotide polymorphism genetic markers. Our data set included 124 collections, which allowed for an examination of population structure and hatchery influence across the study area and provided a robust tool for population assignment. Population assignment tests were conducted using the program RUBIAS. Result Population assignment tests were successful for all pure WCT of unknown origin despite potential influence from hatchery lineages across the study area. Of 83 migratory WCT captured below AFD, approximately 80% were assigned to tributaries upstream of AFD with a posterior assignment probability of at least 90%. Only one fish was assigned to a tributary downstream of AFD. Conclusion Our results indicate that AFD disrupts the natural metapopulation dynamics of WCT populations in the basin. Passage for WCT at this barrier would reestablish metapopulation connectivity within the basin by allowing migratory individuals to make genetic contributions to populations upstream of the dam.

Wells, Craig D. (ORCID:0000000258513250)↗
DOE OSTI2024

Inferring precocial Chinook Salmon production through single‐parentage assignments

Abstract Objective Parentage analysis is a routine methodology in fisheries research, but study systems exist where it is impractical to sample both parents. The ability to reliably assign offspring to a single parent is beneficial in these situations. We applied single‐parentage assignments to a naturally spawning population of Chinook Salmon Oncorhynchus tshawytscha to quantify production of anadromous returns by unsampled precocial males. Methods We used an approach that focused on two important aspects of parentage analyses: (1) addressing the presence of family structure within the set of sampled parents and (2) controlling for false‐positive and false‐negative assignments. Result Results indicated that 30% of reproductively successful males were precocial males, which produced 20% of the returning anadromous offspring. Conclusion This study provides a framework for applying single‐parent assignments in a salmonid study system while explicitly addressing sources of assignment errors.

Steele, Craig A.↗
DOE OSTI2021

Quantifying sensitivity in numerical weather prediction-modeled offshore wind speeds through an ensemble modeling approach

A decade of research has shown that numerical weather prediction (NWP)-modeled wind speeds can be highly sensitive to the inputs and setups within the NWP model. For wind resource characterization applications, this sensitivity is often addressed by constructing a range of setups and selecting the one that best validates against observations. However, this approach is not possible in areas that lack high-quality hub height observations, especially offshore wind areas. In such cases, techniques to quantify and disseminate confidence in NWP-modeled wind speeds in the absence of observations are needed. We address this need in the present study and propose best practices for quantifying the spread in NWP-modeled wind speeds. We implement an ensemble approach in which we consider 24 different setups to the Weather Research and Forecasting (WRF) model. We construct the ensemble by considering variations in WRF version, WRF namelist, atmospheric forcing, and sea surface temperature (SST) forcing. Our analysis finds that the standard deviation produces more consistent estimates compared to the interquartile range and tends to be the more conservative estimator for ensemble variability. We further find that model spread increases closer to the surface and on shorter time scales. In conclusion, we explore methods to attribute total ensemble variability to the different ensemble components (e.g., atmospheric forcing and SST product) and find that contributions by components also vary depending on time scale. We anticipate that the methods and results presented in this paper will provide a reasonable foundation for further research into ensemble-based wind resource data sets.

17 WIND ENERGY↗
DOE OSTI2021

Reliability‐based layout optimization in offshore wind energy systems

Abstract Existing methods for optimizing wind array layouts typically use power or cost objectives and rarely consider reliability‐based objectives. Component and system failure rates, however, are dependent on location‐specific wind conditions, are influenced by array layout and wake interactions, and have a direct and significant impact on capital costs, operational costs, and power production. Although wind power plant models exist that calculate wind loads with sufficient resolution to capture component loading dynamics from wind conditions, they are computationally expensive and thus not suitable for research applications requiring many evaluations, particularly optimization. This study describes the development of computationally efficient, reliability‐based layout optimization methods, enabling us to explore the relationship between component reliability and layout optimization. These methods include the surrogate modeling of the planet bearing life based on varying wind conditions simulated in FAST.Farm and the formulation of reliability‐based objectives based on failure cost and power production models. Through demonstration of this method, we explore how wind conditions, objective functions, and capacity density influence reliability‐based layout optimization. Results indicate that considering reliability alongside power production can reduce failure costs associated with replacement costs and downtime while maintaining or improving power production. Our conclusions highlight the opportunity for wind power plant developers to integrate reliability and operational expenditures alongside performance and capital expenditure objectives in plant design and development to improve plant performance and costs.

17 WIND ENERGY↗