Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “computing methodologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Organ and effective dose coefficients for cranial and caudal irradiation geometries: photons

With the introduction of new recommendations of the International Commission on Radiological Protection (ICRP) in Publication 103, the methodology for determining the protection quantity, effective dose, has been modified. The modifications include changes to the defined organs and tissues, the associated tissue weighting factors, radiation weighting factors and the introduction of reference sex-specific computational phantoms. Computations of equivalent doses in organs and tissues are now performed in both the male and female phantoms and the sex-averaged values used to determine the effective dose. Dose coefficients based on the ICRP 103 recommendations were reported in ICRP Publication 116, the revision of ICRP Publication 74 and ICRU Publication 57. The coefficients were determined for the following irradiation geometries: anterior-posterior (AP), posterior-anterior (PA), right and left lateral (RLAT and LLAT), rotational (ROT) and isotropic (ISO). In this work, the methodology of ICRP Publication 116 was used to compute dose coefficients for photon irradiation of the body with parallel beams directed upward from below the feet (caudal) and directed downward from above the head (cranial). These geometries may be encountered in the workplace from personnel standing on contaminated surfaces or volumes and from overhead sources. Calculations of organ and tissue kerma and absorbed doses for caudal and cranial exposures to photons ranging in energy from 10 keV to 10 GeV have been performed using the MCNP6.1 radiation transport code and the adult reference phantoms of ICRP Publication 110. As with calculations reported in ICRP 116, the effects of charged-particle transport are evident when compared with values obtained by using the kerma approximation. At lower energies the effective dose per particle fluence for cranial and caudal exposures is less than AP orientations while above similar to 30 MeV the cranial and caudal values are greater.

61 RADIATION PROTECTION AND DOSIMETRY↗

Generalized Brønsted‐Evans‐Polanyi Relationships for Reactions on Metal Surfaces from Machine Learning

Abstract Brønsted‐Evans‐Polanyi (BEP) relationships, i. e., a linear scaling between reaction and activation energies, lie at the core of computational design of heterogeneous catalysts. However, BEPs are not general and often require reparameterization for each class of reactions. Here we construct generalized BEPs (gBEPs), which can predict activation energies for a diverse dataset of reactions of C, O, N and H containing molecules on metal surfaces. In a first step we develop a set of descriptors based on scaling relationships that can capture the change in chemical identity of reactants during the reaction. Subsequently, we use the reaction energy, these descriptors and a single descriptor for the surface structure to parameterize machine learning based regression approaches for the prediction of activation energies. The best approach we developed shows a Mean Absolute Error (MAE) of 0.11 eV for the training set (80 % of the data set) and 0.23 eV for the test set (20 % of the data set). The methodology presented here allows to calculate activation energies within fractions of seconds on a typical personal computer and due to its generality, accuracy and simplicity in application it might prove to be useful in transition metal catalyst design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Identification of subsurface structures using electromagnetic data and shape priors

We consider the inverse problem of identifying large-scale subsurface structures using the controlled source electromagnetic method. To identify structures in the subsurface where the contrast in electric conductivity can be small, regularization is needed to bias the solution towards preserving structural information. We propose to combine two approaches for regularization of the inverse problem. In the first approach we utilize a model-based, reduced, composite representation of the electric conductivity that is highly flexible, even for a moderate number of degrees of freedom. With a low number of parameters, the inverse problem is efficiently solved using a standard, second-order gradient-based optimization algorithm. Further regularization is obtained using structural prior information, available, e.g., from interpreted seismic data. The reduced conductivity representation is suitable for incorporation of structural prior information. Such prior information cannot, however, be accurately modeled with a gaussian distribution. To alleviate this, we incorporate the structural information using shape priors. The shape prior technique requires the choice of kernel function, which is application dependent. We argue for using the conditionally positive definite kernel which is shown to have computational advantages over the commonly applied gaussian kernel for our problem. Numerical experiments on various test cases show that the methodology is able to identify fairly complex subsurface electric conductivity distributions while preserving structural prior information during the inversion.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Active Measurement of the Impact of Network SwitchUtilization on Application Performance

Inter-node networks are a key capability of High-Performance Computing (HPC) systems that differentiates them from less capable classes of machines. However, in spite of their very high performance, the increasing computational power of HPC compute nodes and the associated rise in application communication needs make network performance a common performance bottleneck. To achieve high performance in spite of network limitations application developers require tools to measure their applications’ network utilization and inform them about how the network’s communication capacity relates to the performance of their applications. This paper presents a new performance measurement and analysis methodology based on empirical measurements of network behavior. Our approach uses two benchmarks that inject extra network communication. The first probes the fraction of the network that is utilized by a software component (an application or an individual task) to determine the existence and severity of network contention. The second aggressively injects network traffic while a software component runs to evaluate its performance on less capable networks or when it shares the network with other software components. We then combine the information from the two types of experiment to predict the performance slowdown experienced by multiple software components (e.g. multiple processes of a single MPI application) when they share a single network. Our methodology is applied to individual network switches and demonstrated on two real systems with different types of switches and compute node architectures.

97 MATHEMATICS AND COMPUTING↗

dfnWorks: A discrete fracture network framework for modeling subsurface flow and transport

DFNWORKS is a parallelized computational suite to generate three-dimensional discrete fracture networks (DFN) and simulate flow and transport. Developed at Los Alamos National Laboratory over the past five years, it has been used to study flow and transport in fractured media at scales ranging from millimeters to kilometers. The networks are created and meshed using DFNGEN, which combines FRAM (the feature rejection algorithm for meshing) methodology to stochastically generate three-dimensional DFNs with the LaGriT meshing toolbox to create a high-quality computational mesh representation. The representation produces a conforming Delaunay triangulation suitable for high performance computing finite volume solvers in an intrinsically parallel fashion. Flow through the network is simulated in dfnFlow, which utilizes the massively parallel subsurface flow and reactive transport finite volume code PFLOTRAN. A Lagrangian approach to simulating transport through the DFN is adopted within DFNTRANS to determine pathlines and solute transport through the DFN. Example applications of this suite in the areas of nuclear waste repository science, hydraulic fracturing and CO 2 sequestration are also included.

42 ENGINEERING↗

GPU-based Real-Time Execution of Vehicular Mobility Models in Large-Scale Road Network Scenarios

A methodology and its associated algorithms are presented for mapping a novel, field-based vehicular mobility model onto graphical processing unit computational platform for simulating mobility in large-scale road networks. Of particular focus is the achievement of real-time execution, on desktop platforms, of vehicular mobility on road networks comprised of millions of nodes and links, and multi-million counts of simultaneously active vehicles. The methodology is realized in a system called GARFIELD, whose implementation details and performance study are described. The runtime characteristics of a prototype implementation are presented that show real-time performance in simulations of networks at the scale of a few states of the US road networks.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

EFFICIENT THEORETICAL SCREENING OF SOLID SORBENTS FOR CO2 CAPTURE APPLICATIONS

Carbon dioxide is a major combustion product of coal, which once released into the air can contribute to global climate change. Current CO2 capture technologies for power generation processes including amine solvents and CaO-based sorbent materials require very energy intensive regeneration steps which result in significantly decreased efficiency. Hence, there is a critical need for new materials that can capture and release CO2 reversibly with acceptable energy costs if CO2 is to be captured and sequestered economically. Inorganic sorbents are one such class of materials which typically capture CO2 through the reversible formation of carbonates. By combining thermodynamic database mining with first principles density functional theory and phonon lattice dynamics calculations, a theoretical screening methodology to identify the most promising CO2 sorbent candidates from the vast array of possible solid materials has been proposed and validated. The ab initio thermodynamic technique has the advantage of identifying thermodynamic properties of CO2 capture reactions without any experimental input beyond crystallographic structural information of the solid phases involved. For a given solid, the first step is to attempt to extract thermodynamic properties from thermodynamic databases and available literatures. If the thermodynamic properties of the compound of interest are unknown, an ab initio thermodynamic approach is used to calculate them. These properties expressed conveniently as chemical potentials and heat of reactions, either from databases or from calculations, are further used for computing the thermodynamic reaction equilibrium properties of the CO2 absorption/desorption cycle based on the chemical potential and heat of reaction. Only those solid materials for which lower capture energy costs are predicted at the desired process conditions are selected as CO2 sorbent candidates and further considered for experimental validations. Solid sorbents containing alkali and alkaline earth metals have been reported in several previous studies to be good candidates for CO2 sorbent applications due to their high CO2 absorption capacity at moderate working temperatures. In addition to introducing our selection process in this presentation, we will present our results for solid systems of alkali and alkaline metal oxides, hydroxides and carbonates/bicarbonates to validate our methodology. Additionally, applications of our computational method to mixed solid systems of Li2O and SiO2 with different mixing ratios, we showed that increasing the Li2O/SiO2 ratio in lithium silicates increases their corresponding turnover temperatures for CO2 capture reactions. These theoretical predictions are in good agreement with available experimental findings.

01 COAL, LIGNITE, AND PEAT↗

Cooperative Education

Los Alamos National Laboratory (LANL) is a multidisciplinary national laboratory that conducts research and development in national security, engineering, materials science, computational modeling, and advanced manufacturing. The laboratory develops innovative technologies to address complex scientific and engineering challenges. This project focuses on the development and evaluation of high-performance absorbing structures through computational design, simulation, and engineering analysis. Absorbing structures are used in applications where damage mitigation, structural protection, and material efficiency are critical performance requirements. The increasing demand for lightweight, high-strength, and highly efficient structural systems has created a need for improved design methodologies capable of maximizing absorption while minimizing weight and material usage. The project utilizes advanced engineering software, including 3D CAD software and FEA, to generate and optimize structural concepts. Computational simulations are performed to evaluate structural behavior under loading conditions, while mathematical analyses are conducted using Python-based tools as well as established analytical equations from material and structural mechanics. The project benefits LANL by supporting the development of advanced design methodologies and improving the understanding of material and structural performance. During the internship term, a significant portion of the design development, simulation, and data analysis activities will be completed. Success of the project depends on collaboration among engineering mentors and technical staff members. Work will be conducted at Los Alamos National Laboratory using laboratory computing resources and engineering software.

42 ENGINEERING↗

Neural-based time series forecasting of loss of coolant accidents in nuclear power plants

During the last few years, deep learning in neural networks has demonstrated impressive successes in the areas of computer vision, speech and image recognition, text generation, and many others. However, sensitive engineering areas such as nuclear engineering benefited less from these efficient techniques. In this work, deep learning expert systems are utilized to model and predict time series progression of a design-basis nuclear accident, featuring a loss of coolant accident. Two major findings are accomplished in this work. First, the ability to train expert systems with high accuracy, which could help nuclear power plant operators to figure out plant responses during the accident. Second, building fast, efficient, and accurate deep models to simulate nuclear phenomena, which could be valuable to nuclear computational science. In this work, large amount of time series data is obtained from simulation tools by simulating different conditions of the base-case/nominal accident scenario. Four critical outputs/responses are monitored during the accident (e.g. temperature, pressure, break flow rate, water level). Two approaches are adopted in this work. The first approach is to use feedforward deep neural networks (DNN) to fit all time steps and outputs in a single model. The second approach is to use long short-term memory (LSTM) to fit all time steps together for each reactor response separately. Both DNN and LSTM demonstrate very good performance in predicting the test and base-case scenarios, with accuracy as low as 92% and as high as 99%, where these test scenarios are unknown to the expert systems and are not included in the model training. In addition, both approaches demonstrate a significant reduction in computational costs, as the deep expert system is able to accurately predict the accident 100,000 times faster than the original simulation tool. Given sufficient data, the methodology adopted in this study demonstrates that DNN/LSTM expert systems can be used as a decision support system to model advanced time series phenomena within nuclear power plants with high accuracy and negligible computational costs.

42 ENGINEERING↗

State space parameterization of explosive eigenvalues during autoignition

Explosive modes such as ignition and extinction are characterized by an eigenvalue of the chemical Jacobian matrix with positive real part, representing the transient instability of chain-branching chemistry and thermal feedback. Formation and eigen-decomposition of the Jacobian matrix are expensive operations whose cost increases cubically with chemical mechanism size. As an alternative to directly computing the eigenvalues of the Jacobian, we explore principal component analysis (PCA) along with nonlinear regression as a methodology to parameterize the eigenvalues by state variables (or linear combinations thereof). We evaluate this modeling strategy using homogeneous autoignition data on two different applications: pseudotransient continuation (Ψtc)-based ODE solvers and chemical explosive mode analysis (CEMA). Results indicate that the PCA-based parameterization of the eigenvalues appears feasible for Ψtc solvers in autoignition calculations over a range of temperatures and pressures. Our results also show that eigenvalue models are capable of tracking sharp discontinuities (such as ignition or extinction) in the eigenvalue for computational flame diagnostics such as CEMA.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Advanced Modeling of Ions in Solutions, on Surfaces, and in Biological Environments (Final Scientific/Technical Report)

The research supported by this grant focused on modeling liquid water from basic microscopic theory and on developing advanced methodologies for molecular simulation and electronic structure calculation of large and disordered systems. Water is arguably the most important molecule on earth: without it there would be no life, as we know it. Water does not behave as a simple liquid. Understanding its unique and anomalous properties at the molecular level has been the focus of intense study during the entire last century and still is a major goal of research today. To address the problem we adopted a multipronged approach that included methodological and algorithmic developments as well as simulations of important model systems. We made progress on several key issues. (i) We implemented accurate electronic structure schemes for modeling water from quantum mechanical theory that make accessible in simulations processes driven by formation and breaking of chemical bonds. We studied in this way neat bulk water and simple solvated ions. We could understand, in particular, why hydronium, i.e. the positive water ion, diffuses faster than its negative counterpart, the hydroxyl, solving a 200-year-old ionic mystery of water, as reported in a news article featuring our study on Chemistry World, the magazine of the Royal Society of Chemistry (U.K.). (ii) Using advanced statistical mechanical techniques we studied water in the deeply undercooled regime, which may hold the clue to understanding many of the water anomalies. These conditions are currently only accessible to simulations based on empirical force fields. We found that deeply undercooled water, as described by the popular force field ST2, possesses a secondary critical point, below which it would spontaneously separate into two liquids, one of low-density (LDL) and one of high-density (HDL), much in the same way in which water and oil phase-separate at room temperature. The secondary critical point is supported indirectly by many experiments, but rapid ice nucleation has so far hindered direct observation. In related studies we gained new insight on the connection of the two metastable liquids with the two corresponding amorphous ice phases, LDA and HDA, which are observed experimentally. (iii) We developed and implemented several new algorithms for computing the electronic structure of large systems and to accelerate the calculation of electron exchange energies. We applied these methodologies to model nanomaterials, such as nanoribbons and nanoflakes, and to study water absorption and splitting on nanomaterials. (iv) We developed new local order descriptors. (v) In the last year of the project we developed a methodology based on deep neural networks to construct model interatomic potentials that can accurately reproduce ab-initio quantum mechanical simulations at the computational cost of empirical force fields. These potentials will make possible to access the size and time scales that are currently only accessible with empirical force fields without loosing the predictive power of ab-initio simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A New Method for High Resolution Surface Change Detection: Data Collection and Validation of Measurements from UAS at the Nevada National Security Site, Nevada, USA

The use of uncrewed aerial systems (UAS) increases the opportunities for detecting surface changes in remote areas and in challenging terrain. Detecting surface topographic changes offers an important constraint for understanding earthquake damage, groundwater depletion, effects of mining, and other events. For these purposes, changes on the order of 5–10 cm are readily detected, but sometimes it is necessary to detect smaller changes. An example is the surface changes that result from underground explosions, which can be as small as 3 cm. Previous studies that described change detection methodologies were generally not aimed at detecting sub-5-cm changes. Additionally, studies focused on high-fidelity accuracy were either computationally modeled or did not fully provide the necessary examples to highlight the usability of these workflows. Detecting changes at this threshold may be critical in certain applications, such as global security research and monitoring for high-consequence natural hazards, including landslides. Here we provide a detailed description of the methodology we used to detect 2–3 cm changes in an important applied research setting—surface changes related to underground explosions. This methodology improves the accuracy of change detection data collection and analysis through the optimization of pre-field planning, surveying, flight operations, and post-processing the collected data, all of which are critical to obtaining the highest output data resolution possible. We applied this methodology to a field study location, collecting 1.4 Tb of images over the course of 30 flights, and location data for 239 ground control points (GCPs). We independently verified changes with orthoimagery, and found that structure-from-motion, software-reported root mean square errors (RMSEs) for both control and check points underestimated the actual error. We found that 3 cm changes are detectable with this methodology, thereby improving our knowledge of a rock’s response to underground explosions.

47 OTHER INSTRUMENTATION↗

Modeling Coverage Dependence in Surface Reaction Networks

In heterogeneous catalysis molecules adsorb on surfaces and react to form products which desorb. It has been known for a long time that the reactivity of a surface depends on coverage of intermediates, but there had been little work in quantitatively modeling this dependence or in understanding the nature of the coverage dependence. Our work aimed to develop methods for quantitatively modeling the coverage dependence of adsorption energies, and to determine the origin of the coverage dependence. We utilized density functional theory to compute the coverage dependent adsorption energies of many atomic adsorbates (H, C, N, O, and S) on the late transition metal (111) surfaces. We were able to show that the coverage dependence is due to an adsorbate-induced surface electronic structure modification mechanism of the metal atom d-orbitals. Furthermore, we showed the coverage dependence is similar for all of these adsorbates and metal surfaces, enabling the prediction of the coverage dependence of other adsorbates and metals. There are numerous ways that adsorbates can adsorb onto a surface; too many to attempt to compute every possible adsorbate configuration using density functional theory. To address this limitation we used the density functional theory results to construct a simpler model (a cluster expansion) that could be used to enumerate the configurations that could be described by a simple lattice of adsorption sites. The cluster expansion enabled us to show that the similarity in the coverage dependence exists across all coverages. Although the cluster expansion methodology can be extended in principle to multiple adsorbates, adsorption sites and alloys, in practice this is tedious and computationally expensive. As alternative this the cluster expansion approach, we developed a simple model that describes the coverage dependent mechanism that is extendable to alloy surfaces. This model allows large-scale screening studies to be performed, and was used in part of this work to identify sulfur-tolerant alloy catalysts. This grant provided full support one PhD student, Spencer Miller, who now works for Advanced Process Combinatorics, and partial support for another PhD student, Nilay Inoglu, who now works for Exxon Mobil. The work supported by this grant has been published in eight peer-reviewed publications and two book chapters which are listed in section 3. One of the publications (PRB 2010, 82, 045414) was selected as an important scientific contribution within the DOE BES Catalysis Science program for 2011. One final manuscript is nearly completed. This work was presented at four invited academic talks, including an international summer school, seven invited conference talks and 21 contributed talks and posters over the course of the grant.

99 GENERAL AND MISCELLANEOUS↗

Structured hints : extracting and abstracting domain expertise.

We propose a new framework for providing information to help optimize domain-specific application codes. Its design addresses problems that derive from the widening gap between the domain problem statement by domain experts and the architectural details of new and future high-end computing systems. The design is particularly well suited to program execution models that incorporate dynamic adaptive methodologies for live tuning of program performance and resource utilization. This new framework, which we call 'structured hints', couples a vocabulary of annotations to a suite of performance metrics. The immediate target is development of a process by which a domain expert describes characteristics of objects and methods in the application code that would not be readily apparent to the compiler; the domain expert provides further information about what quantities might provide the best indications of desirable effect; and the interactive preprocessor identifies potential opportunities for the domain expert to evaluate. Our development of these ideas is progressing in stages from case study, through manual implementation, to automatic or semi-automatic implementation. In this paper we discuss results from our case study, an examination of a large simulation of a neural network modeled after the neocortex.

97 MATHEMATICS AND COMPUTING↗

Structure- and Interaction-Based Design of Anti-SARS-CoV-2 Aptamers

Aptamer selection against novel infections is a complicated and time-consuming approach. Synergy can be achieved by using computational methods together with experimental procedures. In this study, we aim to develop a reliable methodology for a rational aptamer in silico et vitro design. The new approach combines multiple steps: (1) Molecular design, based on screening in a DNA aptamer library and directed mutagenesis to fit the protein tertiary structure; (2) 3D molecular modeling of the target; (3) Molecular docking of an aptamer with the protein; (4) Molecular dynamics (MD) simulations of the complexes; (5) Quantum-mechanical (QM) evaluation of the interactions between aptamer and target with further analysis; (6) Experimental verification at each cycle for structure and binding affinity by using small-angle X-ray scattering, cytometry, and fluorescence polarization. By using a new iterative design procedure, structure- and interaction-based drug design (SIBDD), a highly specific aptamer to the receptor-binding domain of the SARS-CoV-2 spike protein, was developed and validated. The SIBDD approach enhances speed of the high-affinity aptamers development from scratch, using a target protein structure. The method could be used to improve existing aptamers for stronger binding. This approach brings to an advanced level the development of novel affinity probes, functional nucleic acids. It offers a blueprint for the straightforward design of targeting molecules for new pathogen agents and emerging variants.

60 APPLIED LIFE SCIENCES↗

Modelling climate analogue regions for a central European city

In this study, we describe a methodology to derive climate analogue cities for spatially highly resolved future climate scenarios. For the computation, a reduced and in hindsight bias-adjusted EURO-CORDEX EUR-11 dataset is used based on two climate scenarios (RCP4.5 and RCP8.5). A total of 389 European cities are processed by the algorithm, which uses five statistical climate variables (2-m air temperature average and amplitude, precipitation sum and amplitude, correlation between 2-m air temperature average and precipitation sum). Additionally, extreme weather events (hot days, summer days, tropical nights, extreme precipitation events) are calculated for further comparison and validation. Finding an appropriate analogue permits a more accurate derivation and depiction of necessary climate adaptation efforts and therefore assist decision-making in city planning. As an example of our method, we searched for plausible climate twins for the mid-sized city of Aachen (Germany) at the end of the twenty-first century. Our results show that the French city of Dijon is highly likely to become Aachen’s climate twin by the end of the century for RCP4.5. As for the scenario RCP8.5, no clear European analogue city could be determined, indicating that the city might enter a novel climate. The nearest match suggests the cities of Florence and Prato in Tuscany. However, considering climate indices, the encompassing region of the French–Spanish city triangle Bordeaux–Toulouse–Bilbao is a better fit. The developed algorithm can be applied to any of the cities included in the dataset.

54 ENVIRONMENTAL SCIENCES↗

Modeling receptor flexibility in the structure-based design of KRAS G12C inhibitors

KRAS has long been referred to as an ‘undruggable’ target due to its high affinity for its cognate ligands (GDP and GTP) and its lack of readily exploited allosteric binding pockets. Recent progress in the development of covalent inhibitors of KRAS G12C has revealed that occupancy of an allosteric binding site located between the α3-helix and switch-II loop of KRAS G12C —sometimes referred to as the ‘switch-II pocket’—holds great potential in the design of direct inhibitors of KRAS G12C . In studying diverse switch-II pocket binders during the development of sotorasib (AMG 510), the first FDA-approved inhibitor of KRAS G12C , we found the dramatic conformational flexibility of the switch-II pocket posing significant challenges toward the structure-based design of inhibitors. Here, we present our computational approaches for dealing with receptor flexibility in the prediction of ligand binding pose and binding affinity. For binding pose prediction, we modified the covalent docking program CovDock to allow for protein conformational mobility. This new docking approach, termed as FlexCovDock, improves success rates from 55 to 89% for binding pose prediction on a dataset of 10 cross-docking cases and has been prospectively validated across diverse ligand chemotypes. For binding affinity prediction, we found standard free energy perturbation (FEP) methods could not adequately handle the significant conformational change of the switch-II loop. We developed a new computational strategy to accelerate conformational transitions through the use of targeted protein mutations. Using this methodology, the mean unsigned error (MUE) of binding affinity prediction were reduced from 1.44 to 0.89 kcal/mol on a set of 14 compounds. These approaches were of significant use in facilitating the structure-based design of KRAS G12C inhibitors and are anticipated to be of further use in the design of covalent (and noncovalent) inhibitors of other conformationally labile protein targets.

59 BASIC BIOLOGICAL SCIENCES↗

Combining shallow-water and analytical wake models for tidal array micro-siting

For tidal-stream energy to become a competitive renewable energy source, clustering multiple turbines into arrays is paramount. Array optimisation is thus critical for achieving maximum power performance and reducing cost of energy. However, ascertaining an optimal array layout is a complex problem, subject to specific site hydrodynamics and multiple inter-disciplinary constraints. In this work, we present a novel optimisation approach that combines an analytical-based wake model, FLORIS, with an ocean model, Thetis. The approach is demonstrated through applications of increasing complexity. By utilising the method of analytical wake superposition, the addition or alteration of turbine position does not require re-calculation of the entire flow field, thus allowing the use of simple heuristic techniques to perform optimisation at a fraction of the computational cost of more sophisticated methods. Using a custom condition-based placement algorithm, this methodology is applied to the Pentland Firth for arrays with turbines of 3.05 m/s rated speed, demonstrating practical implications whilst considering the temporal variability of the tide. For a 24-turbine array case, micro-siting using this technique delivered an array 15.8% more productive on average than a staggered layout, despite flow speeds regularly exceeding the rated value. Performance was evaluated through assessment of the optimised layout within the ocean model that treats turbines through a discrete turbine representation. Used iteratively, this methodology could deliver improved array configurations in a manner that accounts for local hydrodynamic effects.

16 TIDAL AND WAVE POWER↗