Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ceramic processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Luminescence evolution from alumina ceramic surface before flashover under direct and alternating current voltage in vacuum

The luminescence evolution phenomena from alumina ceramic surface in vacuum under high voltage of direct and alternating current are reported, with the voltage covering a large range from far below to close to the flashover voltage. Its time resolved and spatial distributed behaviors are examined by a photon counting system and an electron-multiplying charge-coupled device (EMCCD) together with a digital camera, respectively. The luminescence before flashover exhibits two stages as voltage increasing, i.e., under a relative low voltage (Stage A), the luminescence is ascribed to radiative recombination of hetero-charges injected into the sample surface layer by Schottky effect; under a higher voltage (Stage B), a stable secondary electron emission process, resulting from the Fowler-Nordheim emission at the cathode triple junction (CTJ), is responsible for the luminescence. Spectrum analysis implies that inner secondary electrons within the surface layer of alumina generated during the SSEE process also participate in the luminescence of Stage B. A comprehensive interpretation of the flashover process is formulated, which might promote a better understanding of flashover issue in vacuum.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Development of highly porous scaffolds based on bioactive silicates for dental tissue engineering

Graphical abstract: - Highlights: • Synthesis of an Mg-based glass-ceramic via the sol–gel technique. • The heat treatment of the glass-ceramic promoted the crystallization of akermanite. • Akermanite scaffolds coated with gelatin were successfully fabricated. • An HCAp layer was developed on the surface of all scaffolds after 9 days in SBF. - Abstract: Various scaffolding materials, ceramics and especially Mg-based ceramic materials, including akermanite (Ca{sub 2}MgSi{sub 2}O{sub 7}) and diopside (CaMgSi{sub 2}O{sub 6}), have attracted interest for dental tissue regeneration because of their improved mechanical properties and controllable biodegradation. The aim of the present work was the synthesis of an Mg-based glass-ceramic, which would be used for the construction of workable akermanite scaffolds. The characterization of the synthesized material was performed by Fourier Transform Infrared Spectroscopy (FTIR) X-Ray Diffractometry (XRD) and Scanning Electron Microscopy (SEM). Finally, the apatite forming ability of the scaffolds was assessed by immersion in simulated body fluid. The scaffolds were fabricated by the foam replica technique and were subsequently coated with gelatin to provide a functional surface for increased cell attachment. Finally, SEM microphotographs and FTIR spectra of the scaffolds after immersion in SBF solution indicated the inorganic bioactive character of the scaffolds suitable for the intended applications in dental tissue engineering.

36 MATERIALS SCIENCE↗

Resin chemistry and particle size influence on stereolithography with silicon carbide

Stereolithography (SLA) is an established process able to produce high resolution polymer parts with complex geometries. Silicon carbide (SiC) has uses in a variety of applications, but traditionally was difficult to manufacture into complex geometries. There have been advances in producing SiC through SLA using a SiC-derived ceramic such as silicon oxycarbide (SiOC). In this study, a slurry using a commercially available resin as the base material with additional modifiers was investigated to create a SiC slurry ready for pressureless sintering. The effects of photoinitiator, dispersant and a bimodal distribution of SiC particle sizes was studied using a design of experiments (DOE). A slurry with a bimodal distribution of 70 % coarse and 30 % fine SiC powder at 40 % solids loading by volume was prepared and successfully printed. Rheology measurements show the slurry to have viscoelastic shear thinning behavior below the recommended 1000 Pas necessary for printing. Printing parameters for the new material on a commercially available SLA printer were studied parametrically. The laser marking speeds found to print the slurry was 260 mm/s and 130 mm/s. A slurry and printing parameters were determined to produce a green part with a proposed debinding cycle.

Herd, Tien [ORNL]↗

Large remnant polarization and magnetic field induced destruction of cycloidal spin structure in Bi{sub 1-x}La{sub x}FeO{sub 3} (0 {<=} x {<=} 0.2)

We prepared a series of Bi{sub 1-x}La{sub x}FeO{sub 3} (0 {<=} x {<=} 0.2) ceramics with a sol-gel method and find that both the magnetization and dielectric constant show an abrupt anomaly near a critical field H{sub c}, which is attributed to the destruction of the cycloidal antiferromagnetic spin structure. The critical field H{sub c} decreases substantially from {approx}20 T for the x = 0 sample [Y. F. Popov et al., JETP Lett. 57, 69 (1993)] to {approx}2.8 T for the x = 0.17 sample and finally to 0 T for the x = 0.2 sample at room temperature (RT). It is also found that H{sub c} increases with decreasing temperature. The variation of H{sub c} with La substitution and temperature can be ascribed to the change in the magnetic anisotropy and isotropic superexchange interaction, respectively. We have also discussed the magnetodielectric effects in these samples in terms of the Ginzburg-Landau theory and the spin-phonon model. Moreover, increasing the doping level of La to 0.15 greatly improves the RT leakage-current and ferroelectric (FE) properties. A RT square-shaped FE hysteresis loop with remnant polarization (2P{sub r}) as high as {approx}64 {mu}C/cm{sup 2} is obtained for the x = 0.15 sample. These results may be important for potential applications in BiFeO{sub 3}-based magnetoelectric devices.

36 MATERIALS SCIENCE↗

Numerical simulation of effective mechanical properties of stochastic composites with consideration for structural evolution under intensive dynamic loading

Mechanical behavior of stochastic metal-ceramic composites with the aluminum matrix under high-rate deformation at shock-wave loading is numerically simulated with consideration for structural evolution. Effective values of mechanical parameters of metal-ceramic composites Al B{sub 4}C, Al SiC, and Al Al{sub 2}O{sub 3} are evaluated depending on different concentration of ceramic inclusions.

36 MATERIALS SCIENCE↗

Pyrochlore-type lanthanide titanates and zirconates: Synthesis, structural peculiarities, and properties

This contribution provides a thorough examination of the structural characteristics of pyrochlore-type lanthanide titanates and zirconates Ln2Ti2O7 and Ln2Zr2O7, across various length scales. This paper also examines their processing, interesting physical properties (electrical, magnetic, and thermal characteristics), and responses to high pressure and ion irradiation. Brief sections on the elemental oxides' crystal chemistry, pertinent phase diagrams, and energetics of defect formation are also provided. Pyrochlore-type Ln2Ti2O7 and Ln2Zr2O7 stand out as truly multifunctional materials. Moreover, they have emerged as fascinating materials due to magnetic geometrical frustration, arising from the ordering of magnetic Ln3+ and non-magnetic Ti4+ (or Zr4+) cations into separate, interpenetrating lattices of corner-sharing tetrahedra. This results in a diverse array of exotic magnetic ground states, such as spin-ice (e.g., Dy2Ti2O7 or Ho2Ti2O7) or quantum spin ice (e.g., Tb2Ti2O7), observed at both low and room temperatures. They also exhibit varied electrical and electrochemical characteristics. Some members such as Gd2Zr2O7, function as fast ion conductors with a conductivity (σ) of ≈10−2 S·cm−1 at 800 °C and activation energy (Ea) ranging from 0.85 to 1.52 eV, depending on the degree of structural disorder. Others, such as Gd2TiMoO7, are mixed ionic-electronic conductors with σ ≈ 25 S·cm−1 at 1000 °C, making them promising candidate materials for applications in energy conversion and storage devices and oxygen separation membranes. Their exceptionally low thermal conductivity (e.g., κ ∼ 1.1–1.7 W·m−1·K−1 between 700 and 1200 °C for Ln2Zr2O7), close to the glass-like lower limit of highly disordered solids, positions them as valuable materials for thermal barrier coatings. They can also effectively accommodate actinides (e.g., Pu, Np, Cm, Am) in solid solutions and sustain prolonged exposure to radiation due to alpha-decay events, while preserving the integrity of the periodic atomic structure. Proposed as major components in actinide-bearing ceramics, they contribute to the long-term immobilization and disposal of long-lived waste radionuclides from nuclear programs. Some of these properties are displayed simultaneously, opening avenues for new applications. Despite the wealth of data available in the literature, this review highlights the need for a better understanding of order/disorder processes in pyrochlore-type materials and the influence of the structural length scale on their physical and chemical properties. Recent experimental evidence has revealed that pyrochlore short-range structure is far more complex than originally thought. Moreover, pyrochlore local structure is now believed to include short-range, lower symmetry, ordered domains, such as the orthorhombic weberite-type of structure. Notably, short- and long-range structures appear decoupled across different length scales and temperature regimes, and these differences persist even in well-ordered samples. We believe that the pyrochlore structure offers a unique opportunity for examining the interplay between chemical composition, defect chemistry, and properties. In Memoriam: Rodney C. Ewing, Fondly Remembered.

Physics↗

Effects of He Irradiation on Yttria-Stabilized Zirconia Ceramics

Here we study the effects of He irradiation on polycrystalline yttria-stabilized zirconia (YSZ), with the focus on irradiation-induced damage buildup, He behavior, and volume swelling. The evolution of irradiation-induced structural damage in polycrystalline YSZ, which is independent of grain orientation, is described by a multistep damage accumulation model. We found a three-step damage evolution process, and we observed different types of defects in the different damage steps. Compared with single-crystal YSZ, the second damage step occurs at a lower dose in polycrystalline YSZ due to the initial defects and strain. The implanted He ions are readily trapped along the grain boundaries and the mobility of He ions is greatly increased. The enhanced He mobility along the grain boundary leads to a lower threshold irradiation dose and a larger penetration depth for bubble formation. Similar morphologies are observed for the He bubbles in the polycrystalline YSZ is not influenced by grain orientation. Lastly, as both the extended defects and He bubbles can induce volume swelling, the variation in volume swelling as a function of dose can be divided into a two stage process.

36 MATERIALS SCIENCE↗

Improvised Electrsopinning Set Up for Thicker Ceramic Nanofiber Mat for High Power Targets

In high energy particle physics there is a demand for multi-MW high performance particle production targets. Nanofiber microstructure will have better performance than current solid targets in mitigating increased thermal tress waves, radiation damage. The objective is to fabricate thicker ceramic/metallic nano-fiber with high strength, thermal shock resistance using low cost electrospinning process.

43 PARTICLE ACCELERATORS↗

Improving tubular protonic ceramic fuel cell performance by compensating Ba evaporation via a Ba-excess optimized proton conducting electrolyte synthesis strategy

Protonic ceramic fuel cells (PCFCs) are emerging as a promising technology for reduced temperature ceramic energy conversion devices. The BaCe 0.4 Zr 0.4 Y 0.1 Yb 0.1 O 3–δ (BCZYYb4411) electrolyte is notable for its high proton conductivity. However, the tendency of barium to volatilize in BCZYYb4411 during high-temperature sintering compromises its chemical stability and performance. This study investigates the effects of intentionally incorporating excess barium into BCZYYb4411, formulated as Ba 1+x Ce 0.4 Zr 0.4 Y0.1Yb 0.1 O 3–δ (where x = 0, 0.1, 0.2, and 0.3), with the aim of compensating barium evaporation and enhancing the physical and chemical properties. We find that excess barium results in a greater shrinkage rate, facilitating a denser electrolyte structure. This barium-enriched electrolyte demonstrates improved electrochemical performance by effectively counteracting the deleterious effects of barium evaporation. Applying this strategy to tubular PCFCs, we achieved a peak power density of 480 mW•cm –2 at 600 °C. This unique approach provides a simple, tunable, and easy-to-implement processing modification to achieve high-performance tubular PCFC.

25 ENERGY STORAGE↗

Preparation & characterization of SiO{sub 2} interface layer by dip coating technique on carbon fibre for C{sub f}/SiC composites

Carbon fibres (C{sub f}) are one of the most important reinforced materials for ceramic matrix composites such as C{sub f} - SiC composites and they are generally sought for high temperature applications in as space application, nuclear reactor and automobile industries. But the major problem arise when C{sub f} reinforced composites exposed to high temperature in an oxidizing environment, C{sub f} react with oxygen and burnt away. In present work, we have studied the effect of silica (SiO{sub 2}) coating as a protective coating on C{sub f} for the C{sub f} / SiC composites. The silica solution prepared by the sol-gel process and coating on C{sub f} is done by dip coating technique with varying the withdrawing speed i.e. 2, 5, 8 mm/s with fixed dipping cycle (3 Nos.). The uniform silica coating on the C{sub f} is shown by the Scanning Electron Microscope (SEM) analysis. The tensile test shows the increase in tensile strength with respect to increase in withdrawing speed. The isothermal oxidation analysis confirmed enhancement of oxidation resistance of silica coated C{sub f} as compared tothe uncoated C{sub f}.

36 MATERIALS SCIENCE↗

One-Pot Coating of Ceramic Powders by Exfoliated Boron Nitride Layers with a Dense CO 2 Medium and Ultrasound-Aided Mixing

The coating or doping of substrates by two-dimensional materials to impart superior functional properties (such as improved thermal conductivity, bacterial resistance, reduced friction) is receiving increased attention. Environmentally benign, rapid and scalable coating techniques are desirable for this purpose. Here, we report a novel process for coating alumina, silicon carbide and boron carbide substrates with hexagonal boron nitride (h-BN) layers. The process consists of two sequential steps. First, h-BN layers are exfoliated from bulk h-BN in supercritical carbon dioxide (scCO 2 ) using ultrasound-aided mixing. This step is followed by self-assembly (i.e., coating) of the exfoliated h-BN on the substrates in liquid CO 2 also aided by ultrasound. The liquid CO 2 state is achieved by simply lowering the pressure and temperature of the first step below the critical point of CO 2 (P c = 72.8 atm; T c = 31.1 °C). Scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) micrographs clearly reveal the exfoliation of h-BN under scCO 2 conditions as well as the h-BN assembly on various substrates under liquid CO 2 conditions. X-ray diffraction patterns confirm the structural integrity of the coated h-BN layers. It was also confirmed that without a transition to the liquid CO 2 phase following exfoliation in scCO 2 , there was negligible coating of h-BN on the substrates. Researchers in the field could consider this benign process to rapidly coat or dope materials with h-BN and other 2D materials to impart improved functional properties in myriad applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unsteady heat dissipation in accelerator superconducting coils insulated with porous ceramic insulation in normal and supercritical helium conditions

To investigate the unsteady heat dissipation in accelerator superconducting coils insulated with porous ceramic insulation, two experimental mock-ups reproducing the thermal and the mechanical conditions of a superconducting coils were produced. The mock-ups with compressive load of 10 MPa and 20 MPa were tested at normal (T = 4.23 K and p = 1 bar) and supercritical helium conditions (T = 4.23 K and p = 2.0 to 3.75 bar) during unsteady heat dissipation. The paper presents the experimental results of temperature rise in both superconducting coils as a function of time for a wide range of a localized heat load varying from 0.1 kJ/m{sup 3} up to 12.8 MJ m{sup −3} per pulse. A numerical model of the transient process in these coils has been developed and the computations are compared with the experimental results.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Raman spectroscopy, dielectric properties and phase transitions of Ag{sub 0.96}Li{sub 0.04}NbO{sub 3} ceramics

Highlights: • First Raman scattering studies of Ag{sub 0.96}Li{sub 0.04}NbO{sub 3}, allowed us to correlate temperature evolution of relaxational frequency γ{sub R}(T) with the Nb-ion dynamics and showed its changes at freezing temperature and ferrielectric transition. - Abstract: Silver lithium niobates Ag{sub 1−x}Li{sub x}NbO{sub 3} are promising lead free piezoelectrics. Good quality Ag{sub 0.96}Li{sub 0.04}NbO{sub 3} ceramics were obtained. Dielectric and DSC studies showed that, in comparison to AgNbO{sub 3,} temperatures of phase transitions slightly decrease. Dielectric studies pointed to enhancement of polar properties. Remnant polarisations achieves value of 0.6 μC/cm{sup 2}. Maximum of ϵ(T) dependences related to the relaxor-like ferroelectric/ferrielectric M{sub 1}–M{sub 2} transition becomes higher and more frequency dependent. Analysis of Raman spectra showed that two modes at 50 and 194 cm{sup −1} exhibit significant softening. Low frequency part of the Raman spectra which involve central peak and soft mode were analysed using two models. CP was assumed as relaxational vibration and described by Debye function. The slope of temperature dependences of relaxational frequency γ{sub R}(T) changes at approximately 470 and 330 K, indicating that slowing down process of relaxational vibrations changes in the vicinity of partial freezing of Nb-ion dynamics T{sub f} and further freezing at ferroelectric/ferrielectric phase transition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Material Plasma Exposure eXperiment High Heat Flux Microwave Absorber Design, Manufacture, and Articles Test

The Material Plasma Exposure eXperiment (MPEX) at Oak Ridge National Laboratory is in the final design phase. MPEX will be capable of exposing neutron-irradiated materials to plasmas for the study of plasma-material interaction. This facility will provide information about the complex effects of plasmas on materials and contribute to examining new materials that can withstand high heat fluxes and high ion fluences for future fusion devices. MPEX plasma is heated by 70-GHz or 105-GHz electron Bernstein wave/electron cyclotron heating (ECH), and the high-frequency microwaves are prone to scattering microwave power, which can have detrimental effects, especially on diagnostic components. A large portion of the injected ECH power is expected to be absorbed by plasma, but the remainder requires that microwave absorbers be placed immediately upstream and downstream of the ECH launcher to minimize stray microwaves leaving the ECH region. These microwaves can inadvertently heat components that cannot be shielded or otherwise protected. The microwave absorber design is based on an array of pyramid-shaped ceramic tiles brazed to a water-cooled explosion-bonded heat sink and a stainless steel plate to produce one tile module. Computational fluid dynamics and structural analyses were performed to optimize and validate the design. Multiple test coupons were produced to validate the process for brazing the two different tile materials to the Glidcop AL-15 baseplate. The articles were tested to evaluate the reliability and thermal performance through exposure to an electron beam with a heat flux of up to 1.5 MW/m2. Nondestructive testing was performed before and after testing to identify voids or separations that may have been introduced by the high heat flux. This paper discusses the details of high heat flux microwave absorber design, manufacturing details and associated challenges, and test results, demonstrating the effectiveness of the proposed design.

Hussain, Aftab↗

Additive Manufacturing of Bi-Continuous Piezocomposites With Triply Periodic Phase Interfaces for Combined Flexibility and Piezoelectricity

An additive manufacturing-enabled bi-continuous piezocomposite architecture is presented to achieve mechanical flexibility and piezoelectricity simultaneously in piezoelectric materials. This architecture comprises an active ferroelectric ceramic phase and a passive flexible polymer phase, which are separated by a tailorable phase interface. Here, triply periodic minimal surfaces were used to define the phase interface, due to their excellent elastic properties and load transfer efficiency. A suspension-enclosing projection-stereolithography process was used to additively manufacture this material. Postprocesses including polymer infiltration, electroding, and poling are introduced. Piezoelectric properties of the piezocomposites are numerically and experimentally studied. The results highlight the role of tailorable triply periodic phase interfaces in promoting mechanical flexibility and piezoelectricity of bi-continuous piezocomposites.

42 ENGINEERING↗

Advanced Hydrogen Transport Membrane for Coal Gasification

A pilot-scale hydrogen transport membrane (HTM) separator was built that incorporated 98 membranes that were each 24 inches long. This separator used an advanced design to minimize the impact of concentration polarization and separated over 1000 scfh of hydrogen from a hydrogen-nitrogen feed of 5000 scfh that contained 30% hydrogen. This mixture was chosen because it was representative of the hydrogen concentration expected in coal gasification. When tested with an operating gasifier, the hydrogen concentration was lower and contaminants in the syngas adversely impacted membrane performance. All 98 membranes survived the test, but flux was lower than expected. Improved ceramic substrates were produced that have small surface pores to enable membrane production and large pores in the bulk of the substrate to allow high flux. Pd-Au was chosen as the membrane alloy because of its resistance to sulfur contamination and good flux. Processes were developed to produce a large quantity of long membranes for use in the demonstration test.

08 HYDROGEN↗

Complex Oxide Nanoparticle Synthesis: Where to Begin to Do It Right?

Synthesis of advanced ceramics requires a high degree of control over the particle size and stoichiometry of the material. When choosing a synthesis method for complex oxides it is important to begin with the correct precursors and solvents to achieve high purity nanoparticles. Here, we detail the selection process for precursors and solvents for liquid-phase precipitation synthesis. Data for metal nitrate, chloride, acetate, and oxalate precursors has been compiled to assist future synthesis. The role of hydration within the precursors is discussed as it affects the final stoichiometry of the material. Melting temperatures are also compiled for these compounds to assist in material selection. The solubility of the precursors in different solvents is examined to determine the correct solvent during synthesis. As an example, using the methodology presented here, two different materials are synthesized based on commonly available precursors. A catalyst based on a quaternary perovskite and an advanced ionic conductor based on a high entropy fluorite oxide are synthesized using precipitation methods and their characterization is detailed.

Gager, Elizabeth (ORCID:0000000306046571)↗

Dehalogenation of electrochemical processing salt simulants with ammonium phosphates and immobilization of salt cations in an iron phosphate glass waste form

This study demonstrates the conversion of simulated pyroprocessing salt wastes [i.e., ER(SF) and ERV2] into chemically durable iron phosphate glass waste forms through reactions with ammonium hydrogen phosphate precursors [i.e., NH4H2PO4 and (NH4)2HPO4] and added Fe2O3. The reaction of the salt simulants with the phosphate precursors resulted in dehalogenation of the salt through the production of NH4Cl and NH4I (along with water), of which the NH4Cl can be used to produce UCl3 oxidant for use in the electrorefiner during pyroprocessing. These iron phosphate glasses contain a notably higher waste loading than the baseline glass-bonded sodalite ceramic waste form, which requires about 70 vol% sodalite to accommodate Cl from the salt, because they are dehalogenated prior to vitrification. The high waste loadings coupled with higher bulk densities (~3×103 kg/m3) than glass-bonded sodalite (~2.3×103 kg/m3) mean that these glasses have a higher storage volume, i.e., the volume required to immobilize a given mass of waste. The iron phosphate glass waste forms were characterized using a variety of techniques including physical property measurements and chemical durability testing. Following initial testing, a proof-of-concept demonstration was conducted to show that the NH4Cl generated from this process could be used to produce UCl3 using depleted uranium dendrites as a feedstock.

phosphate glass, pyroprocessing, waste forms, salt↗