Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “capacity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Nanoscale Phase Separation and Large Refrigerant Capacity in Magnetocaloric Material LaFe 11.5 Si 1.5

Here, ferromagnetic transitions, the magnetocaloric effect, and the atomic-scale microstructure in an annealed bulk material of LaFe 11.5 Si 1.5 were investigated using magnetic measurements, Mössbauer spectroscopy, high-resolution X-ray diffraction analysis, and high-resolution transmission electron microscopy. The results provide evidence of the coexistence of two ferromagnetic phases with different Curie temperatures. The phase with a Curie temperature of 216 K corresponds to a Si-rich phase of a NaZn 13 -type structure with a small lattice volume, whereas the phase with a Curie temperature of 185 K corresponds to a Si-poor phase of a NaZn 13 -type structure with a large lattice volume. This phase coexistence is observed on a nanometer scale and it can account for inverse thermal hysteresis of the ferromagnetic transition in the Si-rich phase during warming. Furthermore, the phase coexistence helps the bulk material achieve a refrigeration capacity of 170 J kg -1 due to a combination of the magnetocaloric effect in each phase. It is determined that the magnetocaloric effect in the Si-rich and the Si-poor phase brings about a maximum of the total entropy change of -3.55 and -6.80 and J kg -1 K -1 at respective Curie temperatures, respectively. Fundamentally, the phase coexistence indicates coloring of Si atoms in the lattice of a NaZn 13 -type structure and can be attributed to nanoscale phase separation of a disordered precursor during annealing of the bulk material. The nanoscale phase separation may occur in other magnetocaloric materials, thus allowing for improvement of their refrigeration capacity.

36 MATERIALS SCIENCE↗

Synthesis, Structure, and Electrochemical Performance of High Capacity Li 2 Cu 0.5 Ni 0.5 O 2 Cathodes

Orthorhombic Li 2 NiO 2 , Li 2 CuO 2 , and solid solutions thereof have been studied as potential cathode materials for lithium-ion batteries due to their high theoretical capacity and relatively low cost. While neither endmember shows good cycling stability, the intermediate composition, Li 2 Cu 0.5 Ni 0.5 O 2 , yields reasonably high reversible capacities. A new synthetic approach and detailed characterization of this phase and the parent Li 2 CuO 2 are presented. The cycle life of Li 2 Cu 0.5 Ni 0.5 O 2 is shown to depend critically on the voltage window. The formation of Cu 1+ at low voltage and oxygen evolution at high voltage limit the electrochemical reversibility. In situ X-ray absorption spectroscopy (XAS), in situ Raman spectroscopy, and gas evolution measurements are used to follow the chemical and structural changes that occur as a function of cell voltage.

25 ENERGY STORAGE↗

Molybdenum polysulfide chalcogels as high-capacity, anion-redox-driven electrode materials for Li-ion batteries

Sulfur cathodes in conversion reaction batteries offer high gravimetric capacity but suffer from parasitic polysulfide shuttling. We demonstrate here that transition metal chalcogels of approximate formula MoS 3.4 achieve a high gravimetric capacity close to 600 mAh g –1 (close to 1000 mAh g –1 on a sulfur basis) as electrode materials for lithium-ion batteries. Transition metal chalcogels are amorphous and comprise polysulfide chains connected by inorganic linkers. The linkers appear to act as a “glue” in the electrode to prevent polysulfide shuttling. The Mo chalcogels function as electrodes in carbonate- and ether-based electrolytes, which further provides evidence of polysulfide solubility not being a limiting issue. We employ X-ray spectroscopy and operando pair distribution function techniques to elucidate the structural evolution of the electrode. Raman and X-ray photoelectron spectroscopy track the chemical moieties that arise during the anion-redox-driven processes. As a result, we find the redox state of Mo remains unchanged across the electrochemical cycling and, correspondingly, the redox is anion-driven.

25 ENERGY STORAGE↗

Unraveling the Complex Delithiation and Lithiation Mechanisms of the High Capacity Cathode Material V 6 O 13

V 6 O 13 is a promising Li-ion battery cathode material for use in the high temperature oil field environment. The material exhibits a high capacity, and the voltage profile contains several plateaus associated with a series of complex structural transformations, which are not fully understood. The underlying mechanisms are central to understanding and improving the performance of V 6 O 13 -based rechargeable batteries. In this study, we present in situ X-ray diffraction data that highlight an asymmetric six-step discharge and five step charge process, due to a phase that is only formed on discharge. The LixV 6 O 13 unit cell expands sequentially in c , b , and a directions during discharge and reversibly contracts back during charge. The process is associated with change of Li ion positions as well as charge ordering in LixV 6 O 13 . Density functional theory calculations give further insight into the electronic structures and preferred Li positions in the different structures formed upon cycling, particularly at high lithium contents, where no prior structural data are available. Lastly, the results shed light into the high specific capacity of V 6 O 13 and are likely to aid in the development of this material for use as a cathode for secondary lithium batteries.

36 MATERIALS SCIENCE↗

Effects of Climate Change on Capacity Expansion Decisions of an Electricity Generation Fleet in the Southeast U.S.

The electric power sector in the United States faces many challenges related to climate change. On the demand side, climate change could shift demand patterns due to increased air temperatures. On the supply side, climate change could lead to deratings of thermal units due to changes in air temperature, water temperature, and water availability. Past studies have typically analyzed these risks separately. Here, we developed an integrated, multimodel framework to analyze how compounding risks of climate-change impacts on demand and supply affect long-term planning decisions in the power system. In the southeast U.S., we found that compounding climate-change impacts could result in a 35% increase in installed capacity by 2050 relative to the reference case. Participation of renewables, particularly solar, in the fleet increased, driven mostly by the expected increase in summertime peak demand. Such capacity requirements would increase investment costs by approximately 31 billion (USD 2015) over the next 30 years, compared to the reference case. These changes in investment decisions align with carbon emission mitigation strategies, highlighting how adaptation and mitigation strategies can converge.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Water treatment capacity of forward osmosis systems utilizing power plant waste heat

Forward osmosis (FO) has the potential to improve the energy efficiency of membrane-based water treatment by leveraging waste heat from steam electric power generation as the primary driving force for separation. In this study, we develop a comprehensive FO process model, consisting of membrane separation, heat recovery, and draw solute regeneration (DSR) models. We quantitatively characterize three alternative processes for DSR: distillation, steam stripping, and air stripping. We then construct a mathematical model of the distillation process for DSR that incorporates hydrodynamics, mass and heat transport resistances, and reaction kinetics, and we integrate this into a model for the full FO process. Finally, we utilize this FO process model to derive a first-order approximation of the water production capacity given the rejected heat quantity and quality available at U.S. electric power facilities. We find that the upper bound of FO water treatment capacity using low-grade heat sources at electric power facilities exceeds process water treatment demand for boiler water make-up and flue gas desulfurization wastewater systems.

20 FOSSIL-FUELED POWER PLANTS↗

Design, Synthesis, and Characterization of a Bifunctional Chelator with Ultrahigh Capacity for Uranium Uptake from Seawater Simulant

Informed by density functional theory calculations, a novel bifunctional chelator, (Z)-2-[2-(N'-hydroxycarbamimidoyl)phenoxy]benzoic acid, was designed and synthesized for ultrahigh uranium uptake from seawater. Investigation of the ligand for uranium sorption was conducted in artificial seawater (pH = 8.2). An exceptional uranium uptake of 553 mg of uranium (g of sorbent) –1 was obtained with a theoretical saturation capacity of 710 mg g –1 obtained by fitting isotherm data with the Langmuir–Freundlich model. The resulting yellow precipitate was characterized via X-ray absorption fine structure (XAFS) at the U L III -edge, with the extended XAFS spectra best fitted by a model where uranyl is coordinated by monodentate amidoxime, one chelating carboxylic acid, and two water molecules. Overall, these results are consistent with the formation of a uranium coordination polymer. The ultrahigh uranium uptake capacity obtained by the bifunctional chelating ligand makes it a promising candidate for deployment as a uranium adsorbent.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Computational Optimization of Room Temperature Usable Capacity for Hydrogen Storage in MFU-4-Type Metal–Organic Frameworks via Pairwise Metal Substitutions

The efficient storage of hydrogen is a critical challenge in the quest for sustainable energy solutions. Current adsorbent-based methods achieve satisfactory storage densities predominantly under cryogenic temperatures and/or high pressures, which imposes problems with cost-efficient and safe implementation of this technology. Materials that can bind hydrogen gas reversibly at ambient temperatures and more moderate pressures could play a pivotal role in enabling hydrogen-powered technologies. In this study, we use reliable computational modeling to investigate two synthetically feasible paths for tuning the enthalpy of H2 binding in MFU-4-type metal–organic frameworks (MOFs), aiming to maximize usable capacity. This study examines MIM4 IICl3(bta)6 (bta– = benzotriazolate) Kuratowski-type clusters as a model for strong binding sites in MFU-4l frameworks. We systematically evaluate the impact of separately tuning the central MII metal ion (which plays a structural role) and the peripheral MI metal ion (which binds the substrate) on the energetics of H2 binding. Our computational study reveals that H2 binding at an MI site mostly follows the trend AgI < CuI < NiI < CoI < AuI while a larger central MII site generally weakens the H2 binding at a MI site. Importantly, we have identified three new combinations of MI and MII to achieve high fractional usable capacities of the total H2 adsorbed under a pressure swing from 5 to 100 bar at room temperature. Additionally, we examine the nature of the binding interaction between the peripheral metal atom and the hydrogen molecule. While charge transfer predominantly induces this interaction, for several atom combinations, a change in the polarization (associated with variations in the ionic radius of the MI binding atom) is another important factor for adjusting the strength of the interaction. We suggest that the proposed compositions of Kuratowski-type clusters are highly desirable synthetic targets for future laboratory study.

Tkachenko, Nikolay V↗

Effects of Electrolyte Buffer Capacity on Surface Reactant Species and the Reaction Rate of CO 2 in Electrochemical CO 2 Reduction

In the aqueous electrochemical reduction of CO 2 , the choice of electrolyte is responsible for the catalytic activity and selectivity, although there remains a need for more in-depth understanding of electrolyte effects and mechanisms. In this study, using both experimental and simulation approaches, we report how the buffer capacity of the electrolytes affects the kinetics and equilibrium of surface reactant species and the resulting reaction rate of CO 2 with varying partial CO 2 pressure. Electrolytes investigated include KCl (nonbuffered), KHCO 3 (buffered by bicarbonate), and phosphate-buffered electrolytes. Assuming 100% methane production, the simulation successfully explains the experimental trends in maximum CO 2 flux in KCl and KHCO 3 and also highlights the difference between KHCO 3 and phosphate in terms of pKaas well as the impact of the buffer capacity. To examine the electrolyte impact on selectivity, the model is run with a constant total current density. Using this model, several factors are elucidated, including the importance of local pH, which is not in acid/base equilibrium, the impact of buffer identity and kinetics, and the mass-transport boundary-layer thickness. The gained understanding can help to optimize CO 2 reduction in aqueous environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding the Nature of Capacity Decay and Interface Properties in Li//LiNi 0.5 Mn 1.5 O 4 Cells by Cycling Aging and Titration Techniques

The spinel structure LiNi 0.5 Mn 1.5 O 4 (LNMO) is a propitious cathode material for next-generation lithium-ion batteries for fast charge–discharge applications, but its capacity decay mechanism and rate-limiting process are not yet well understood. In this work, electrochemical impedance spectroscopy (EIS) with galvanostatic intermittent titration (GITT) and cycling aging techniques were employed to investigate the nature of capacity decay in disordered-phase LNMO. Different resistive components were separated after every 10 cycles. Cell overvoltages (ΔVs) due to ohmic conduction, charge transfer (CT), and concentration polarization (CP) were individually determined. Results revealed that the cell exhibited a higher ΔV at a higher discharged state. However, the ΔV value for CP was higher at a higher state of charge (SOC), and the overall LNMO/electrolyte interface played a major role in the rate-determining step. Battery life was estimated based on the results. Battery calendar life was found to be more vulnerable than cycle life. Furthermore, results also indicated that the working SOC range could be optimized based on the resistance analysis by avoiding those SOCs that have the most detrimental impact (e.g., heat generation and fire hazard).

25 ENERGY STORAGE↗

Examining Effects of Negative to Positive Capacity Ratio in Three-Electrode Lithium-Ion Cells with Layered Oxide Cathode and Si Anode

The negative to positive electrode capacity ratio (N:P) is crucial for lithium-ion cell design because it affects both energy density and long-term performance. Here, the effect of N:P ratio on electrochemical performance has been investigated for NMC 532 /Si cells containing a reference electrode. By monitoring individual electrode potentials, depths of lithiation/delithiation at the anode and cathode could be determined. The superior performance of the higher N:P cell, including greater reversibility, better capacity retention and lower impedance rise, can be attributed to smaller volume changes in the silicon particles during electrochemical cycling.

25 ENERGY STORAGE↗

Polyethylene Glycol Surface Modification and Polythiophene Side-Chain Chemistry: A Combined Strategy toward High-Capacity Lithium-Ion Battery Anodes

In the development of high-capacity lithium-ion batteries (LIBs), the combined optimization of active material interfaces and polymer binder chemistry plays a critical role in improving electrode performance and longevity. This work explores a dual design strategy incorporating polyethylene glycol (PEG) surface modification and carboxylated polythiophene side-chain tailoring to enhance the electrochemical behavior of magnetite (Fe 3 O 4 )-based anodes. PEG is employed to improve interfacial stability, while carboxylated polythiophene binders with varying alkyl side-chain lengths─poly[3-(potassium-4-butanoate)thiophene-2,5-diyl] (P3KBT), poly[3-(potassium-5-pentanoate)thiophene-2,5-diyl] (P3KPT), and poly[3-(potassium-6-hexanoate)thiophene-2,5-diyl] (P3KHT)─are used to modulate molecular interactions and ion transport. Among these three analogs, the PEG–Fe 3 O 4 –P3KHT electrode exhibits superior ion-transfer kinetics, the highest capacity retention, and the lowest charge-transfer resistance after extended cycling. Compared to their non-PEG analogs, PEG-coated electrodes demonstrate enhanced structural integrity and electrochemical behavior, emphasizing the synergistic effects of surface modification and side-chain chemistry. These findings highlight the importance of interfacial interactions and molecular design in achieving robust and high-performance composite anodes for next-generation LIBs.

Fe3O4↗

Prelithiated SiO x /Graphite-NMC811 Cells: Capacity Loss, Impedance Rise and Hidden Degradation Pathways Revealed Using Three-Electrode Diagnostics

Electrodes containing SiO x /graphite (Gr) materials are attractive as anodes for high-energy lithium-ion batteries. However, their mechanical deformation, electrochemical response, and impedance evolution during long-term cycling are strongly coupled, complicating accurate diagnosis of performance fade mechanisms. In this work, the behavior of electrochemically prelithiated SiO x /Gr anodes paired with NMC811 cathodes is systematically investigated using techniques that include in-situ dilatometry, three-electrode electrochemistry, and multiscale post-cycling microscopy. The SiO x /Gr electrode exhibits a maximum expansion of 49% upon lithiation to 10 mV vs Li + /Li, with 84% of the expansion and 91% of the capacity being reversible. In full cells, relatively stable cycling with only 12% capacity fade over 500 cycles is observed. Three-electrode experiments reveal cell-level impedance growth, which is dominated by the NMC811 cathode: the SiO x /Gr anode exhibits minimal net impedance rise and an initial impedance decrease at low potentials. Despite this apparent electrochemical stability, cross-sectional SEM, PFIB tomography, and cryo-STEM reveal irreversible anode thickening caused by the accumulation of an inorganic-rich solid electrolyte interphase (SEI) permeating the anode bulk. Electrode potential-shift analysis further demonstrates that Li + ions released from lithium reservoirs in the prelithiated anode mask true lithium inventory loss during aging. These results demonstrate that low-expansion SiO x /Gr anodes can simultaneously exhibit favorable cycling and impedance metrics while undergoing substantial, hidden degradation, underscoring the importance of electrode-resolved diagnostics for evaluating prelithiated silicon-based anodes.

25 ENERGY STORAGE↗

Polyisoprene Captured Sulfur Nanocomposite Materials for High-Areal-Capacity Lithium Sulfur Battery

A polyisoprene-sulfur (PIPS) copolymer and nano sulfur composite material (90 wt % sulfur) is synthesized through inverse vulcanization of PIP polymer with micrometer-sized sulfur particles for high-areal-capacity lithium sulfur batteries. The polycrystalline structure and nanodomain nature of the copolymer are revealed through high-resolution transmission electron microscopy (HRTEM). PIP polymer is also used as binders for the electrode to further capture the dissovlved polysulfides. A high areal capacity of ca. 7.0 mAh/cm 2 and stable cycling are achieved based on the PIPS nanosulfur composite with a PIP binder, crucial to commercialization of lithium sulfur batteries. The chemical confinement both at material and electrode level alleviates the diffusion of polysulfides and the shuttle effect. The sulfur electrodes, both fresh and cycled, are analyzed through scanning electron microscopy (SEM). Finally, this approach enables scalable material production and high sulfur utilization at the cell level.

25 ENERGY STORAGE↗

Amidoxime-Functionalized Macroporous Carbon Self-Refreshed Electrode Materials for Rapid and High-Capacity Removal of Heavy Metal from Water

Heavy metal pollution continues to be one of the most serious environmental problems which has attracted major global concern. Here, a rapid, high-capacity, yet economical strategy for deep cleaning of heavy metals ions in water is reported based on amidoxime-functionalized macroporous carbon electrode materials. The active sites of our material can be self-refreshed during the electrochemical removal process, which is different from traditional methods. The novel filter device in this work can purify contaminated water very rapidly (3000 L h –1 m –2 ), and can decrease heavy metal ion concentrations to below 5 ppb with a very short contact time (only 3 s). The original treatment efficiency of the device can be retained even after 1 week of continuous device operation. An extremely high removal capacity of over 2300 mg g –1 can be achieved with 2–3 orders of magnitude higher efficiency than that of surface adsorption-based commercial filters without any decay. Additionally, the cost of energy consumed in our method is lower than $6.67 × 10 –3 per ton of wastewater. We envision that this approach can be routinely applied for the rapid, efficient, and thorough removal of heavy metals from both point-of-use water and industrial wastewater.

36 MATERIALS SCIENCE↗

Cluster-Inspired Design of High-Capacity Anode for Li-Ion Batteries

One of the greatest challenges in next-generation Li-ion batteries (LIB) is to develop high charge capacity anodes with long cycle life. Inspired by the experimental observation of a magic Ti13C22 cluster and its layer-by-layer growth, we have constructed one-dimensional nanowires using Ti9C13 clusters as well as those based on planar-tetracoordinate carbon-containing (ptC) Ti8C12 metcar and TiC clusters with bulk cubic crystal structure. Using density functional theory and molecular dynamics we studied their energetic and thermal stability as well as their potential for LIB anode. The Ti9C13 nanowire is found to be stable up to 2500 K and has a charge capacity five times larger than that of the graphite anode being used today. Furthermore, unlike silicon nanotube anode materials, the Ti9C13 nanowire does not suffer from volume expansion/contraction during lithiation/delithiation processes.

Zhao, Tianshan↗

High-Capacity Sodium Peroxide Based Na–O 2 Batteries with Low Charge Overpotential via a Nanostructured Catalytic Cathode

The superoxide based Na-O 2 battery has circumvented the issue of large charge overpotential in Li-O-2 batteries; however, the one-electron process leads to limited capacity. Here in this paper, a sodium peroxide based low-overpotential (similar to 0.5 V) Na-O 2 battery with a capacity as high as 7.5 mAh/cm 2 is developed with Pd nanoparticles as catalysts on the cathode.

25 ENERGY STORAGE↗

A Water-Miscible Quinone Flow Battery with High Volumetric Capacity and Energy Density

A water-miscible anthraquinone with polyethylene glycol (PEG)-based solubilizing groups is introduced as the redox-active molecule in a negative electrolyte (negolyte) for aqueous redox flow batteries, exhibiting the highest volumetric capacity among aqueous organic negolytes. We synthesized and screened a series of PEG-substituted anthraquinones (PEGAQs) and carefully studied one of its isomers, namely, 1,8-bis(2-(2-(2-hydroxyethoxy)ethoxy)ethoxy)anthracene-9,10-dione (AQ-1,8-3E-OH), which has high electrochemical reversibility and is completely miscible in water of any pH. Here, a negolyte containing 1.5 M AQ-1,8-3E-OH, when paired with a ferrocyanide-based positive electrolyte across an inexpensive, nonfluorinated permselective polymer membrane at pH 7, exhibits an open-circuit potential of 1.0 V, a volumetric capacity of 80.4 Ah/L, and an energy density of 25.2 Wh/L.

25 ENERGY STORAGE↗