Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WAVELENGTHS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Measuring Neutrino Oscillations in the NOvA and CHIPS Detectors.

NOvA is a long baseline neutrino experiment which uses muon neutrinos produced by the NuMI beam at the Fermi National Accelerator Laboratory to measure muon neutrino disappearance and electron neutrino appearance, among other analyses. The Far/Near Extrapolation analysis framework (FNEX) was used to measure muon neutrino disappearance using the events observed by NOvA while the NuMI beam was in Forward Horn Current configuration (i.e. this analysis uses neutrino data, not antineutrino data). The values of the parameters measured in this analysis are sin 2 θ 23 - 0.499$^{+0.098}_{-0.069}$ and Δm$^2_{32}$ - 2.454$^{+0.108}_{0.119}$ × 10 -3 eV, which is consistent with the results of NOvA’s main muon neutrino disappearance analysis using the experiment’s usual framework, known as CAF. The CHIPS detector is a water Cherenkov detector currently in construction. It will also use the NuMI beam to perform muon neutrino disappearance and electron neutrino appearance analyses. The necessary water clarity for a detector with a diameter of 25 m and a height of 6 m is discussed, as well as the results of testing water filtration systems. The filtration that will be used for the detector is a 10 µm carbon block filter and a 0.5 µm filter in series, with no reverse osmosis or ultraviolet sterilisation being used. This provides an attenuation length of 16.63 ± 0.25 m for light of 532 nm wavelength (green), so light with a wavelength of 405 nm (violet) would have an attenuation length of 133±2 m. The greatest possible distance between a PMT and any point in the detector’s volume is approximately 26 m, so 133 m is sufficient for the detector to measure Cherenkov light produced anywhere in the detector.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2020

Two dimensional meta-material windows

Conductive nanoshells are oriented so as to redirect incident radiation as a function of wavelength. Nanoshells can be formed on templates such as nanospheres or gratings and embedded in an elastomeric layer. In some examples, conductive nanoshells are coupled to a layer that is configured to unbuckle and buckle as a function of temperature, so that radiation in one or more wavelength ranges is directed differently at different temperatures. Building windows can include such layers to that infrared radiation is reflected on warm days and directed into a building on cool days. Such layers can also direct incident visible radiation to a room ceiling so as to enhance interior lighting.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

Complementary reverse order filters

In example implementations, an apparatus is provided. The apparatus includes an optical transmission component and an optical reception component. The optical transmission component includes a plurality of lasers and a transmit filter. The plurality of lasers each emit a different wavelength of light. The transmit filter includes a plurality of different regions that correspond to one of the different wavelengths of light emitted by the plurality of lasers. The optical reception component includes a plurality of photodiodes and a complementary reverse order (CRO) filter. The CRO filter includes a same plurality of different regions as the transmit filter in a reverse order.

42 ENGINEERING↗
DOE OSTI2021

Solar thermal aerogel receiver and materials therefor

A silica aerogel having a mean pore size less than 5 nm with a standard deviation of 3 nm. The silica aerogel may have greater than 95% solar-weighted transmittance at a thickness of 8 mm for wavelengths in the range of 250 nm to 2500 nm, and a 400° C. black-body weighted specific extinction coefficient of greater than 8 m 2 /kg for wavelengths of 1.5 μm to 15 μm. Silica aerogel synthesis methods are described. A solar thermal aerogel receiver (STAR) may include an opaque frame defining an opening, an aerogel layer disposed in the opaque frame, with at least a portion of the aerogel layer being proximate the opening, and a heat transfer fluid pipe in thermal contact with and proximate the aerogel layer. A concentrating solar energy system may include a STAR and at least one reflector to direct sunlight to an opening in the STAR.

Chen, Gang↗
DOE OSTI2021

Ultraviolet radiation pre-treatment of wastewater, improving its utility for algal cultivation

The present invention relates to a process of remediating wastewaters, preferably agricultural wastewaters resulting from animal production or contained animal feeding operation sites. The water is treated to promote assimilation of nutrients into algal biomass, which can be harvested and sold, and the resultant wastewater is then purified. According to the invention, short wavelength UV radiation (less than 280 nm wavelength) is used to pretreat wastewater, with the dose determined by absorbance of the water, not by bacterial load. Pretreated water exhibits changes in chromophoric dissolved organic matter that allows for improved and increased algae production by as much as 88%.

Feris, Kevin↗
DOE OSTI2021

Non-destructive, in-situ evaluation of water presence using thermal contrast and cooled detector

Exemplary systems for detecting water include: a light source positioned to transmit thermal radiation through a sample; a lens assembly positioned to: receive the thermal radiation transmitted through the sample; and focus the transmitted thermal radiation onto a filter positioned between the lens assembly and a detector; and a cooling subsystem for cooling the filter and the detector to a temperature below that of the sample. The filter (1) selectively transmits first portions of the thermal radiation received from the lens assembly and characterized by a wavelength at least partially overlapping a predefined water absorption band and/or a predefined water absorption line; and (2) selectively blocks second portions of the thermal radiation received from the lens assembly and characterized by a wavelength outside the predefined water absorption band and/or the predefined water absorption line. Methods for detecting presence of water in a sample are also disclosed.

Bora, Mihail↗
DOE OSTI2021

Carrier Lifetime as a Function of Se Content for CdSexTe1-x Films Grown on Al2O3 and MgZnO: Preprint

Time-resolved photoluminescence (TRPL) with two excitation wavelengths – 670 (standard) and 405 nm – was used to examine the effect on carrier lifetime of two significant recent advances in CdTe: the incorporation of Se to form graded CdSe x Te 1-x and the use of Mg y Zn 1-y O buffers. The two excitation wavelengths probe depths of approximately 130 and 35 nm, respectively, and their comparison helps differentiate interface and bulk contributions to carrier lifetime. It was found that x = 0.2 Se was required to obtain lifetime improvements, primarily in the bulk. Additionally, TRPL traces for Mg y Zn 1-y O/CdSe x Te 1-x samples showed fast initial decay followed by a long-lived tail, which may be indicative of trap-dominated recombination. This behavior was not present for CdSe x Te 1-x films grown on Al 2 O 3 , which is currently state-of-the-art for surface passivation in CdTe. This indicates that further work is required to sufficiently passivate the front interface.

cadmium telluride↗
DOE OSTI2021

Strain control in optoelectronic devices

A coating having a mismatched coefficient of thermal expansion is applied to an underlying light emitting diode (LED) or laser diode (LD), such that as the temperature of the device changes, a varying level of strain is introduced to the underlying LED or LD. Because strain can also adjust the effective bandgap energy (and hence emission wavelength) of the device, the external strain-inducing coating can act to either compensate for the wavelength shift due to temperature (resulting in reduced dλ/dT) or accentuate it (resulting in increased dλ/dT). By proper selection of coating material and geometry, full control over dλ/dT can be achieved.

Voss, Lars F.↗
DOE OSTI2021

Hybrid chip-on-board LED module with patterned encapsulation

Light modules and methods of forming light modules are disclosed. A light module includes a first plurality and a second plurality of light emitting elements configured to emit, respectively, a first light and a second light, and both arranged on a substrate. An encapsulation layer is disposed over the first and second plurality of the light emitting elements, and a wavelength converting element is dispersed in the encapsulation layer. A concentration of the wavelength converting element in the encapsulation layer varies, is larger over the first plurality of light emitting elements and is smaller over the second plurality of light emitting elements.

Soer, Wouter Anthon↗
DOE OSTI2021

Ultra-low reflectance broadband omni-directional anti-reflection coating

An anti-reflection coating has an average total reflectance of less than 10%, for example less than 5.9% such as from 4.9% to 5.9%, over a spectrum of wavelengths of 400-1100 nm and a range of angles of incidence of 0-90 degrees with respect to a surface normal of the anti-reflection coating. An anti-reflection coating has a total reflectance of less than 10%, for example less than 6% such as less than 4%, over an entire spectrum of wavelengths of 400-1600 nm and an entire range of angles of incidence of 0-70 degrees with respect to a surface normal of the anti-reflection coating.

Chhajed, Sameer↗
DOE OSTI2021

Optically enhanced patternable photosensitivity via oxygen excitation

The present disclosure relates to a method for performing a three dimensional (3D) printing process. A primary light beam having a wavelength sufficient to initiate polymerization of a photoresin is generated and patterned into a patterned primary beam. The patterned primary beam is directed toward an ultraviolet (UV) or visible light sensitive photoresin to initiate polymerization of select areas of the photoresin. The photoresin is also illuminated with a secondary light beam having a wavelength of at least one of about 765 nm, 1064 nm, or 1273 nm. The secondary light beam stimulates triplet oxygen into singlet oxygen, which controls oxygen inhibition in additional areas bordering the select areas, to enable controlled polymerization inhibition in the additional areas bordering the select areas.

Hensleigh, Ryan↗
DOE OSTI2022

Qualification study of SiPMs on a large scale for the CMVD Experiment

A Cosmic Muon Veto (CMV) detector using extruded plastic scintillators is being designed around the mini-Iron Calorimeter (mini-ICAL) detector at the transit campus of the India based Neutrino Observatory, Madurai for the feasibility study of shallow depth underground experiments. The scintillation signals that are produced in the plastic due to muon trajectories are absorbed by wavelength shifting (WLS) fibres. The WLS fibres re-emit photons of longer wavelengths and propagate those to silicon photo-multipliers (SiPMs). The SiPMs detect these photons, producing electronic signals. The CMV detector will use more than 700 scintillators to cover the mini-ICAL detector and will require around 3000 SiPMs. The design goal for the cosmic muon veto efficiency of the CMV is >99.99%. Hence, every SiPM used in the detector needs to be tested and characterised to satisfy the design goal of CMV. A mass testing system was developed for the measurement of gain and choice of the overvoltage ($V_{ov}$) of each SiPMs using an LED driver. The $V_{ov}$ is obtained by studying the noise rate, the gain of the SiPM. This paper describes the experimental setup used to test the SiPMs characteristics along with detailed studies of those characteristics as a function of temperature.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Optical design concept of the CMB-S4 large-aperture telescopes and cameras

CMB-S4 -- the next-generation ground-based cosmic microwave background (CMB) experiment - will significantly advance the sensitivity of CMB measurements and improve our understanding of the origin and evolution of the universe. CMB-S4 will deploy large-aperture telescopes fielding hundreds of thousands of detectors at millimeter wavelengths. We present the baseline optical design concept of the large-aperture CMB-S4 telescopes, which consists of two optical configurations: (i) a new off-axis, three-mirror, free-form anastigmatic design and (ii) the existing coma-corrected crossed-Dragone design. We also present an overview of the optical configuration of the array of silicon optics cameras that will populate the focal plane with 85 diffraction-limited optics tubes covering up to 9 degrees of field of view, up to $1.1 \, \rm mm$ in wavelength. We describe the computational optimization methods that were put in place to implement the families of designs described here and give a brief update on the current status of the design effort.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Mass testing of SiPMs for the CMVD at IICHEP

A Cosmic Muon Veto Detector (CMVD) is being built around the mini-Iron Calorimeter (mini-ICAL) detector at the transit campus of the India based Neutrino Observatory, Madurai. The CMV detector will be made using extruded plastic scintillators with embedded wavelength shifting (WLS) fibres which propagate re-emitted photons of longer wavelengths to silicon photo-multipliers (SiPMs). The SiPMs detect these scintillation photons, producing electronic signals. The design goal for the cosmic muon veto efficiency of the CMV is $>$99.99% and fake veto rate less than 10$^{-5}$. A testing system was developed, using an LED driver, to measure the noise rate and gain of each SiPM, and thus determine its overvoltage ($V_{ov}$). This paper describes the test results and the analysed characteristics of about 3.5k SiPMs.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Highly efficient small molecule multi-junction organic photovoltaic cells

A highly efficient multi junction photovoltaic device, such as a two, three, or four junction device, is disclosed. The multi-junction device may include a first subcell comprising a first photoactive region and a second subcell comprising a second photoactive region. The first and second photoactive regions are designed to minimize spectral overlap and maximize photocurrent across a broad absorption spectra, such as wavelengths ranging from 400 nm to 900 nm. The device may further include an inter-connecting layer, disposed between the first subcell and the second subcell, that is at least substantially transparent. By introducing a transparent interconnecting layer, a dual element (tandem) cell achieves a power conversion efficiency of 10.0±0.5%. By adding an additional (3rd) sub-cell that absorbs at the second order optical interference maximum within the stack. The triple junction cell significantly improves the quantum efficiency at shorter wavelengths, achieving a power conversion efficiency of 11.1±0.5%. Adding additional sub-cells has been shown to increase power conversion efficiency above 12%.

Che, Xiaozhou↗
DOE OSTI2022

Tunable side-bounce x-ray monochromator

Monochromators selectively transmit a narrow band of wavelengths of radiation from a broader band of wavelengths for use in a variety of applications and industries. Disclosed is a method and system for fixed-exit angle tunable monochromator. The system includes a first diffraction element configured to reflect an input beam incident on a surface of the first diffraction element. The input beam has an input beam vector and the first diffraction element is rotatable about the input beam vector. The system further includes a second diffraction element configured to reflect the beam as an output beam having a fixed beam exit angle. The beam is incident on a surface of the second diffraction element and the reflected beam has a reflected beam vector. The second diffraction element is rotatable about both the input beam vector and the reflected beam vector.

Hong, Hawoong↗
DOE OSTI2022

System and method for remote detection and location of gas leaks

A system for monitoring for a gas leak from a gas containing structure is disclosed. The system includes a lens that directs an image of a scene of interest through an optical filter onto a detector. The filter is associated with the lens and the filter has one or more passbands that passes wavelengths which match one or more emission or reflectively wavelengths of the gas being monitored. A detector receives the image after the image passes through the lens and the filter. The detector generates image data representing the scene including the gas containing structure. A processor is configured to process the image data by executing machine executable code stored on a memory. The machine executable code processes the image data to identify turbulence flows in the image data such that turbulence flow indicates a gas leak, and generate and send an alert in response to the identification of a turbulence flow.

O'Neill, Mary D.↗
DOE OSTI2023

Tunable plasmonic color device and method of making the same

A plasmonic system is disclosed. The system includes at least one polarizer that is configured to provide at least one linearly polarized broadband light beam, an anisotropic plasmonic metasurface (APM) assembly having a plurality of nanoantennae each having a predetermined orientation with respect to a global axis representing encoded digital data, the APM assembly configured to receive the at least one linearly polarized broadband light beam and by applying localized surface plasmon resonance reflect light with selectable wavelengths associated with the predetermined orientations of the nanoantennae, and at least one analyzer that is configured to receive the reflected light with selectable wavelength, wherein the relative angles between each of the at least one analyzers and each of the at least one polarizers are selectable with respect to the global axis, thereby allowing decoding of the digital data.

Kildishev, Alexander V.↗