Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VIBRATION EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Mode coupling and multiquantum vibrational excitations in Feshbach-resonant positron annihilation in molecules

The dominant mechanism of low-energy positron annihilation in polyatomic molecules is through positron capture in vibrational Feshbach resonances (VFR). In this paper, we investigate theoretically the effect of anharmonic terms in the vibrational Hamiltonian on positron annihilation rates. Such interactions enable positron capture in VFRs associated with multiquantum vibrational excitations, leading to enhanced annihilation. Mode coupling can also lead to faster depopulation of VFRs, thereby reducing their contribution to the annihilation rates. To analyze this complex picture, we use coupled-cluster methods to calculate the anharmonic vibrational spectra and dipole transition amplitudes for chloroform, chloroform-d 1 , 1,1-dichloroethylene, and methanol, and use these data to compute positron resonant annihilation rates for these molecules. Theoretical predictions are compared with the annihilation rates measured as a function of incident positron energy. Overall, the results demonstrate the importance of mode coupling in both enhancement and suppression of the VFR. There is also experimental evidence for the direct excitation of multimode VFR. Their contribution is analyzed using a statistical approach, with an outlook towards more accurate treatment of this phenomenon.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Excited States and Luminescent Properties of UO 2 F 2 and Its Solvated Complexes in Aqueous Solution

The electronic absorption and emission spectra of free UO 2 F 2 and its water solvated complexes below 32 000 cm –1 are investigated at the levels of ab initio CASPT2 and CCSD(T) with inclusion of scalar relativistic and spin–orbit coupling effects. The influence of the water coordination on the electronic spectra of UO 2 F 2 is explored by investigating the excited states of solvated complexes (H 2 O) n UO 2 F 2 (n = 1–3). In these uranyl complexes, water coordination is found to have appreciable influence on the 3 Δ (Ω = 1 g ) character of the luminescent state and on the electronic spectral shape. The simulated luminescence spectral curves based on the calculated spectral parameters of (H 2 O) n UO 2 F 2 from CCSD(T) approach agree well with experimental spectra in aqueous solution at both near-liquid-helium temperature and room temperature. The possible luminescence spectra of free UO 2 F 2 in gas phase are predicted on the basis of CASPT2 and CCSD(T) results, respectively, by considering three symmetric vibration modes. Finally, the effect of competition between spin–orbit coupling and ligand field repulsion on the luminescent state properties is discussed.

Environmental Molecular Sciences Laboratory↗

Structure and magnetic properties of low-temperature phase Mn-Bi nanosheets with ultra-high coercivity and significant anisotropy

The microstructure, crystal structure, and magnetic properties of low-temperature phase (LTP) Mn-Bi nanosheets, prepared by surfactant assistant high-energy ball milling (SA-HEBM) with oleylamine and oleic acid as the surfactant, were examined with scanning electron microscopy, X-ray diffraction, and vibrating sample magnetometer, respectively. Effect of ball-milling time on the coercivity of LTP Mn-Bi nanosheets was systematically investigated. Results show that the high energy ball milling time from tens of minutes to several hours results in the coercivity increase of Mn-Bi powders and peak values of 14.3 kOe around 10 h. LTP Mn-Bi nanosheets are characterized by an average thickness of tens of nanometers, an average diameter of ∼1.5 μm, and possess a relatively large aspect ratio, an ultra-high room temperature coercivity of 22.3 kOe, a significant geometrical and magnetic anisotropy, and a strong (00l) crystal texture. Magnetization and demagnetization behaviors reveal that wall pinning is the dominant coercivity mechanism in these LTP Mn-Bi nanosheets. The ultrafine grain refinement introduced by the SA-HEBM process contribute to the ultra-high coercivity of LTP Mn-Bi nanosheets and a large number of defects put a powerful pinning effect on the magnetic domain movement, simultaneously. Further magnetic measurement at 437 K shows that a high coercivity of 17.8 kOe and a strong positive temperature coefficient of coercivity existed in the bonded permanent magnet made by LTP Mn-Bi nanosheets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A "Kane's Dynamics" Model for the Active Rack Isolation System Part Two: Nonlinear Model Development, Verification, and Simplification

Many microgravity space-science experiments require vibratory acceleration levels that are unachievable without active isolation. The Boeing Corporation's active rack isolation system (ARIS) employs a novel combination of magnetic actuation and mechanical linkages to address these isolation requirements on the International Space Station. Effective model-based vibration isolation requires: (1) An isolation device, (2) an adequate dynamic; i.e., mathematical, model of that isolator, and (3) a suitable, corresponding controller. This Technical Memorandum documents the validation of that high-fidelity dynamic model of ARIS. The verification of this dynamics model was achieved by utilizing two commercial off-the-shelf (COTS) software tools: Deneb's ENVISION(registered trademark), and Online Dynamics Autolev(trademark). ENVISION is a robotics software package developed for the automotive industry that employs three-dimensional computer-aided design models to facilitate both forward and inverse kinematics analyses. Autolev is a DOS-based interpreter designed, in general, to solve vector-based mathematical problems and specifically to solve dynamics problems using Kane's method. The simplification of this model was achieved using the small-angle theorem for the joint angle of the ARIS actuators. This simplification has a profound effect on the overall complexity of the closed-form solution while yielding a closed-form solution easily employed using COTS control hardware.

Beech, G. S.↗

Actuator placement for active sound and vibration control of cylinders

Active structural acoustic control is a method in which the control inputs (used to reduce interior noise) are applied directly to a vibrating structural acoustic system. The control concept modeled in this work is the application of in-plane force inputs to piezoceramic patches bonded to the wall of a vibrating cylinder. The cylinder is excited by an exterior noise source -- an acoustic monopole -- located near the outside of the cylinder wall. The goal is to determine the force inputs and sites for the piezoelectric actuators so that (1) the interior noise is effectively damped; (2) the level of vibration of the cylinder shell is not increased; and (3) the power requirements needed to drive the actuators are not excessive. We studied external monopole excitations at two frequencies. A cylinder resonance of 100 Hz, where the interior acoustic field is driven in multiple, off-resonance cylinder cavity modes, and a cylinder resonance of 200 Hz are characterized by both near and off-resonance cylinder vibration modes which couple effectively with a single, dominant, low-order acoustic cavity mode at resonance. Previous work has focused almost exclusively on meeting objective (1) and solving a complex least-squares problem to arrive at an optimal force vector for a given set of actuator sites. In addition, it has been noted that when the cavity mode couples with cylinder vibration modes (our 200 Hz case) control spillover may occur in higher order cylinder shell vibrational modes. How to determine the best set of actuator sites to meet objectives (1)-(3) is the main contribution of our research effort. The selection of the best set of actuator sites from a set of potential sites is done via two metaheuristics -- simulated annealing and tabu search. Each of these metaheuristics partitions the set of potential actuator sites into two disjoint sets: those that are selected to control the noise (on) and those that are not (off). Next, each metaheuristic attempts to improve this initial solution by calculating the change in the objective value when one selected actuator site is turned off and one actuator site that previously was not selected is turned on. All such pairwise exchanges are performed and the exchange that improves the objective the most is made. Eventually the search is unable to improve the objective value and a local optimum (with respect to pairwise exchanges) is reached. Both simulated annealing and tabu search provide mechanisms to escape local optima and allow the search to continue until (hopefully) a global optimum is found. Our experiments with the 100 Hz and 200 Hz cases confirm that both metaheuristics are able to uncover better solutions than those selected based upon engineering judgement alone. In addition, the high quality solutions generated by these metaheuristics, when minimizing interior noise, do not further excite the cylinder shell. Thus, we are able to meet objective (2) without imposing an additional constraint or forming a multiobjective performance measure. An additional observation is that in many cases the amplitude and phase values for several chosen actuator sites were nearly identical. This natural grouping means that fewer control channels are needed and the resulting control system is simpler. Currently no power requirements have been set, so objective (3) cannot be addressed. A set of experiments is planned with a laboratory test article (a cylinder). For these experiments the transfer matrices will be generated experimentally. It is hoped that the predicted performance of the best actuator sites found by our metaheuristics will correlate well with the measured performance.

Kincaid, Rex K.↗

Crystal chemistry peculiarities of Cs{sub 2}Te{sub 4}O{sub 12}

The Raman and IR-absorption spectra of the Cs{sub 2}Te{sub 4}O{sub 12} lattice are first recorded and interpreted. Extraordinary features observed in the structure and Raman spectra of Cs{sub 2}Te{sub 4}O{sub 12} are analyzed by using ab initio and lattice-dynamical model calculations. This compound is specified as a caesium-tellurium tellurate Cs{sub 2}Te{sup IV}(Te{sup VI}O{sub 4}){sub 3} in which Te{sup IV} atoms transfer their 5p electrons to [Te{sup VI}O{sub 4}]{sub 3}{sup 6-} tellurate anions, thus fulfilling (jointly with Cs atoms) the role of cations. The Te{sup VI}-O-Te{sup VI} bridge vibration Raman intensity is found abnormally weak, which is reproduced by model treatment including the Cs{sup +} ion polarizability properties in consideration. -- Graphical abstract: Two versions of the BPM estimations of the Raman intensity for the Cs{sub 2}Te{sub 4}O{sub 12} lattice vibrations: (a) without including effects of the Cs-O bonds and (b) including the above mentioned effects. Experimentally observed peaks are characterized by their frequency positions. Display Omitted Research highlights: > Extraordinary features observed in the structure and Raman spectra of Cs{sub 2}Te{sub 4}O{sub 12}. > Ab initio and lattice-dynamical model calculations. > Abnormally weak Raman intensities of the symmetric Te{sup VI}-O-Te{sup VI} bridge. > The monovalent Cs{sup +} cations profoundly influence the polarizability properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anharmonic phonons, thermal expansion, and nuclear quantum effects in Zn

The anharmonic behavior of phonons and thermal expansion of hexagonal zinc were studied from 15 to 690 K by inelastic neutron scattering (INS) and ab initio simulations. Phonon spectra were measured for Q-points covering the full Brillouin zone, giving the phonon density of states (DOS) and dispersions along high-symmetry directions. The dispersions were sharp at 15 K, but diffuse intensity was observed at energies above them. The dispersions broadened with temperature T and the diffuse intensity became stronger. This diffuse intensity appeared in all INS measurements and simulations, except for classical molecular dynamics at 15 K. The temperature-dependent effective potential (TDEP) method, which included the nuclear quantum effect from zero-point vibrational dynamics, was used to calculate the free energy and thermal expansion. For T < 100 K nuclear quantum effects were important for obtaining the correct negative thermal expansion, and path integral molecular dynamics (PIMD) was particularly effective for obtaining the negative thermal expansion in the basal plane. A Heisenberg-Langevin model for interacting phonons coupled to a thermal bath was able to reproduce the shape and intensity of the diffuse spectral features.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Near-Threshold Rovibrational Excitation of HF by Electron Impact

The pronounced threshold peaks found in cross sections for electron-impact excitation of the vibrational levels of HF have been studied using an R-matrix method, in which electron exchange, correlation effects and polarization are included. Vibration is modelled inside the R-matrix sphere using the energy-modified adiabatic phase matrix method (EMAP). Rotation of the target molecule is treated outside the R-matrix sphere, using the frame transformation method. The external rovibronic close-coupling equations are solved by analytic methods. Analysis of the multichannel threshold structures indicates that the peaks found for rovibrational excitation of nu = 1 can be interpreted as virtual states while those for nu = 2 correspond to nuclear-excited Feshbach resonances. These two different results correspond simply to a change of sign of a small parameter that is determined by the threshold analysis. Whereas the overall shapes of the excitation peaks agree with earlier theoretical results, we have found detailed rotational fine structures for scattering energies on the order of the rotational constant above and below the opening of the vibrational channels. The partial and total cross sections for rovibrational state-to-state transitions in the energy region of the peaks are analysed. Characteristic cusp structures and excitation peaks are found at the rovibrational thresholds for transitions with small angular momentum transfer (Delta)j =0, 1 and 2. Differential cross sections are similar to recent measurements. These experimental data do not show the relatively sharp rise at the vibrational thresholds indicated by theory. Theory and experiment are in good agreement for the shape and magnitude of the angular dependence of cross sections for rovibrational state-to-state transitions, especially at larger energies.

Thummel, Helmar T.↗

Vibration Survey of Blades in 19XB Axial-Flow Compressor: Dynamic Investigation - 2

Strain-gage measurements were taken under operating conditions from blades of various stages of the 19XB axial-flow compressor in an effort to determine the reason for failures in the seventh and tenth stages. First bending-mode vibrations were detected in the first five stages of the compressor caused by each integral multiple of rotor speed from three through ten. Lead-wire failures in the last five stages resulted in incomplete data. The dynamic-vibration frequencies at various rotor speeds were compared with statically measured frequencies analytically corrected for the influence of centrifugal force. Large increases in vibration ani~litude with increased pressure ratio were observed. During surging operation, blade vibrations were not present. The effects of pressure ratio and surge indicate the existence of aerodynamic excitation as the cause of the blade vibrations.

Meyer, Andre J., Jr.↗

Collision dynamics of polyatomic molecules containing carbon rings at low temperatures

We explore the collision dynamics of complex hydrocarbon molecules (benzene, coronene, adamantane, and anthracene) containing carbon rings in a cold buffer gas of {sup 3}He. For benzene, we present a comparative analysis of the fully classical and fully quantum calculations of elastic and inelastic scattering cross sections at collision energies between 1 and 10 cm{sup −1}. The quantum calculations are performed using the time-independent coupled channel approach and the coupled-states approximation. We show that the coupled-states approximation is accurate at collision energies between 1 and 20 cm{sup −1}. For the classical dynamics calculations, we develop an approach exploiting the rigidity of the carbon rings and including low-energy vibrational modes without holonomic constraints. Our results illustrate the effect of the molecular shape and the vibrational degrees of freedom on the formation of long-lived resonance states that lead to low-temperature clustering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Population inversion on vibrational transitions of molecules under nonresonant optical excitation

The possibility of obtaining a population inversion on vibrational transitions of molecules through nonlinear effects when the pump radiation is absorbed in the wings of spectral lines is investigated theoretically. We show that a population inversion can be produced in molecules on vibrational transitions when intense pump radiation is absorbed in the blue wing of the R branch of the vibrational-rotational molecular spectrum. This effect is related to inequality of the probabilities of the absorption and stimulated emission of radiation and is attributable to collisional transitions between rotational levels. We have ascertained that the larger the rotational constant of the molecule and the higher the pump radiation intensity, the higher the effective frequency of the collisions that give rise to a population inversion. Using the carbon monoxide (CO) molecule as an example, we show that when intense ({approx}1010 W cm{sup -2}) pump radiation is absorbed in the blue wing of the R branch, a noticeable population inversion can be produced and the gain at the center of the R and P branches of the molecular spectrum can reach 0.011 and 0.250 cm{sup -1} at temperatures T = 300 and 100 K, respectively.

74 ATOMIC AND MOLECULAR PHYSICS↗

The experimental behavior of spinning pretwisted laminated composite plates

The purpose of the research is to gain an understanding of the material and geometric couplings present in advanced composite turbo-propellers. Twelve pre-twisted laminated composite plates are tested. Three different ply lay-ups (2 symmetric and 1 asymmetric) and four different geometries (flat and 30x pre-twist about the mid-chord, quarter-chord, and leading edge) distinguish each plate from one another. Four rotating and non-rotating tests are employed to isolate the material and geometric couplings of an advanced turbo propeller. The first series of tests consist of non-rotating static displacement, strain, and vibrations. These tests examine the effects of ply lay-up and geometry. The second series of tests consist of rotating displacement, strain, and vibrations with various pitch and sweep settings. These tests utilize the Dynamic Spin Rig Facility at the NASA Lewis Research Center. The rig allows the spin testing of the plates in a near vacuum environment. The tests examine how the material and plate geometry interact with the pitch and sweep geometry of an advanced turbo-propeller.

Kosmatka, John B.↗

A correlation study of finite-element modeling for vibrations of composite material panels

A correlation study has been made to evaluate the effectiveness of finite-element modeling for vibrations of composite material panels. The three types of composite material panels studied were: (1) symmetrically laminated cross-ply panels, (2) unsymmetrically laminated cross-ply panels, and (3) a 1/6-scale sandwich wing model. Correlations of finite-element predictions for frequencies and vibration modes were made with Rayleigh-Ritz analyses and experimental data. For the symmetrically laminated panels, the finite-element representation predicted vibration modes very accurately. For the unsymmetrically laminated panels it was found that predictions using uncoupled finite-element plate bending elements did not give good agreement with experimental data. The constant-chord, swept-wing model was effectively analyzed by finite-element presentations using either sandwich elements or ribs and spars.

Thornton, E. A.↗

A High‐Efficiency Organic Solar Cell Enabled by the Strong Intramolecular Electron Push–Pull Effect of the Nonfullerene Acceptor

Abstract Besides broadening of the absorption spectrum, modulating molecular energy levels, and other well‐studied properties, a stronger intramolecular electron push–pull effect also affords other advantages in nonfullerene acceptors. A strong push–pull effect improves the dipole moment of the wings in IT‐4F over IT‐M and results in a lower miscibility than IT‐M when blended with PBDB‐TF. This feature leads to higher domain purity in the PBDB‐TF:IT‐4F blend and makes a contribution to the better photovoltaic performance. Moreover, the strong push–pull effect also decreases the vibrational relaxation, which makes IT‐4F more promising than IT‐M in reducing the energetic loss of organic solar cells. Above all, a power conversion efficiency of 13.7% is recorded in PBDB‐TF:IT‐4F‐based devices.

Li, Wanning↗

Super-Large-Scale Hierarchically Porous Films Based on Self-Assembled Eye-Like Air Pores for High-Performance Daytime Radiative Cooling

Metal-free polymer daytime radiative cooling coatings with hierarchical eye-like air pores are proposed and fabricated with a super-large-scale film-stretching method. The hierarchically porous film (HPF) can be further coated with polymethyl methacrylate (PMMA) micro-hemispheres, forming coated HPF (cHPF), which do not dramatically change the optical or thermal properties. The cHPF is slightly better with a lower solar absorptivity (2.4%) and a higher thermal emissivity over the atmospheric transparency window (90.1%). The low solar absorptivity is due to the strong scattering of the hierarchical eye-like air pores, while the molecular vibrations and the focusing effect of the PMMA micro-hemispheres contribute to the high emissivity. Further, an average mid-day temperature reduction of 7.92 °C is achieved relative to the air temperature, and the average cooling power reaches 116.0 W m -2 , which are much better than the cooling performances of the commercial cooling cushion. During the day, the cHPF-covered simulated building is up to 6.47 and 4.84 °C cooler than the ambient and the white painted counterpart, respectively. The film is durable and resistant to chemical etching, and very promising to use globally, especially in warm and tropical regions.

36 MATERIALS SCIENCE↗

Ageing and Its Influence on Vibration Characteristics of Jute/Polyester Composites

In this work, the influence of ageing on vibration characteristics of jute/polyester composite was investigated by varying the fiber length and weight percent. The ageing of composite was carried out under normal and seawater in room temperature. From the result, it is observed that the composite with the fiber length of 5 mm and 25-weight percentage has least moisture absorption and permeability than other types in both normal and seawater due to better fiber-matrix adhesion and closed pack arrangement of fibers. In addition, the above said combination shows better stability and vibration properties are least effected. Further, due to aging, the bonding between fiber and matrix is significantly affected to a larger degree with increase in the fiber content and length, which in turn decreases the natural frequency and damping properties of the composites.

36 MATERIALS SCIENCE↗