Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Surfaced Polymers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Antibacterial polymer coatings.

A series of poly(sulfone)s with quaternary ammonium groups and another series with aldehyde groups are synthesized and tested for biocidal activity against vegetative bacteria and spores, respectively. The polymers are sprayed onto substrates as coatings which are then exposed to aqueous suspensions of organisms. The coatings are inherently biocidal and do not release any agents into the environment. The coatings adhere well to both glass and CARC-coated coupons and they exhibit significant biotoxicity. The most effective quaternary ammonium polymers kills 99.9% of both gram negative and gram positive bacteria and the best aldehyde coating kills 81% of the spores on its surface.

36 MATERIALS SCIENCE↗

Time-dependent charge distributions in polymer films under electron beam irradiation

The time-dependent charge distribution in polymer film under electron beam irradiation is studied by both experiment and numerical simulation. In the experiment, the distribution is measured with the piezoinduced pressure wave propagation method. In the simulation, the initial charge distribution is obtained by the Monte Carlo method of electron scattering, and the charge drift in the specimen is simulated by taking into account the Poisson equation, the charge continuity equation, Ohm's law, and the radiation-induced conductivity. The results obtained show that the negative charge deposited in the polymer film, whose top and bottom surfaces are grounded, drifts toward both grounded electrodes and that twin peaks appear in the charge distribution. The radiation-induced conductivity plays an important role in determining the charge distribution in the polymer films under electron beam irradiation.

36 MATERIALS SCIENCE↗

Conformation and elasticity of a charged polymer chain bridging two nanoparticles

A complex composed of a charged flexible polymer chain irreversibly attached with its ends to surfaces of two nanoparticles was investigated using the Metropolis Monte Carlo method on a simple cubic lattice. The simulations were performed in the presence of explicit ions. The bridging chain and the nanoparticles bearing the same and the opposite sign charges were considered. Changes in the free energy of the complex upon its stretching or compression, together with the magnitude of the elastic force, were examined. The relative roles of energetic and entropic effects in determining the properties of the complex were identified. Also, the adsorption of charged monomers on the opposite-sign charged nanoparticles and its influence on the examined quantities was studied. Moreover, a simple semi-analytical approach to the thermodynamics of the polymer bridge was derived.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formaldehyde Polymerization on (WO3)3/TiO2(110) Model Catalyst

Polymerization of formaldehyde, H2CO, was studied under ultrahigh vacuum conditions on a model catalyst consisting of monodispersed (WO3)3 clusters anchored on TiO2(110. Formaldehyde oligomers, (H2CO)n, desorbing from the polymer that formed on the catalyst surface are detected between 250 and 325 K in temperature programmed desorption experiments. At least two monolayers (ML) of H2CO are required on the surface to observe (H2CO)n desorption and the amount saturates for H2CO coverages in excess of ~30 ML. The presence of H2CO multilayers is required for the polymerization to take place indicating that it had to occur below 100 K. The saturation amount increases with increasing coverage of (WO3)3 clusters with the highest amount of ~13 ML observed on 1.2 (WO3)3/nm2 . No (H2CO)n desorption was observed on the bare TiO2(110) surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Poly(lactic acid)/Cellulose Composites Obtained from Modified Cotton Fibers by Successive Acid Hydrolysis

This work is focused on the hydrolysis of cotton fibers from waste textiles to obtain micro and nanofibers to be used as reinforcements in polymer composites. To promote their compatibility with polymeric matrix, hydrolyzed cotton fibers were surface modified with various silane compounds. Thus, these fibers were mixed with commercial poly(lactic acid) (PLA) at 5% w/w loading by melt compounding. Acid treatments caused a decrease of the crystallinity index whereas the thermal stability was significantly improved, especially for cellulose fibers hydrolyzed in two steps. Morphological analysis revealed a reduction of the fibers diameter and a decrease of their length as a consequence of the hydrolysis. NMR analysis confirmed the silanization of the fibers by reaction with the silane agent. Tensile tests revealed that silanization treatments were able to increase the composite Young’s modulus and the stress at break with respect to the neat matrix, indicating that silanization improved the polymer/fiber compatibility interfacial adhesion. The overall results demonstrated that applying suitable surface modification strategies, waste cotton textiles can be effectively recycled as fillers in polymer based composites.

36 MATERIALS SCIENCE↗

Testing and Optimization of Electrically Conductive Spacecraft Coatings

This is the final report discussing the work done for the Space Environments and Effects (SEE) Program. It discusses test chamber design, coating research, and test results on electrically thermal control coatings. These thermal control coatings are being developed to have several orders of magnitude higher electrical conductivity than most available thermal control coatings. Most current coatings tend to have a range in surface resistivity from 1,011 to 1,013 ohms/sq. Historically, spacecraft have had thermal control surfaces composed of dielectric materials of either polymers (paints and metalized films) or glasses (ceramic paints and optical solar reflectors). Very seldom has the thermal control surface of a spacecraft been a metal where the surface would be intrinsically electrically conductive. The poor thermal optical properties of most metals have, in most cases, stopped them from being used as a thermal control surface. Metals low infrared emittance (generally considered poor for thermal control surfaces) and/or solar absorptance, have resulted in the use of various dielectric coatings or films being applied over the substrate materials in order to obtain the required optical properties.

Mell, R. J.↗

Transparent superhydrophobic surfaces using a spray coating process

One significant maintenance problem and cost associated with solar energy conversion systems is the soiling due to the accumulation of dust and other pollutants. Here in this work, we describe a scalable approach for applying antisoiling coatings based on superhydrophobic (SH) silica particles using a spray coating process. A large water contact angle (WCA) is one of the characteristics of excellent SH surfaces and because of the low surface energy and low adhesion forces the soiling rate is reduced. Our findings indicate that the WCA depends strongly on the ratio of the polymer binder and the nanoparticles. The nanoparticle surface coverage of the spray coated samples was substantially improved after rinsing with solvent. This process tended to remove large aggregates and excess polymer binder and further increased the WCA by allowing exposure of the functionalized nanoparticles. The durability of the SH coatings was enhanced when the substrate was pretreated with polymer binder and an optimal curing time between 30 and 60 min. The abrasion tests of the SH coatings we report in this study showed that the WCA decreased from ~ 166° to ~ 157° after exposure to 2.6 g of sand. Such coatings will help reduce costs of periodic cleaning of solar energy conversion systems (photovoltaic panels and concentrated solar mirrors).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Mass transfer intensification through increased surface wetting and liquid turbulence using 3D printing structured packing for CO2 capture

The absorber column is one of the most expensive pieces of equipment to construct in the solvent-based post-combustion carbon capture unit. In order to decrease the absorber size and reduce capital costs, novel polymer packings were proposed by enhancing surface wettability and local turbulence within liquid solvent. The novel packings intensify the mass transfer in CO2 absorption and show better separation efficiency than traditional structured packings. In this work, the economic influence of applying the more efficient packing with a shorter absorber column is studied in a techno-economic analysis for a carbon capture unit at a coal-fired power plant. The baseline case includes CO2 capture unit in a supercritical pulverized coal power plant to generate 650 MWe (net) of electricity, where the additional CO2 capture unit leads to 63.4% increase of LCOE. While implementing UK PCC with traditional and novel packings, there will be 47.2% and 46.4% LCOE increase separately, both of which are lower than the baseline value. Applying more efficient packing and smaller absorber could further lessen the LCOE increase. The UK PCC with traditional packings reduces CO2 capture cost by 23.4% and the application of the advanced packings allows to the reduction increases to 24.4%.

60 APPLIED LIFE SCIENCES↗

Ionic cross-linked polyether and silica gel mixed matrix membranes for CO 2 separation from flue gas

Mixed matrix membranes (MMMs) were prepared by incorporating 10 wt%, 20 wt% and 30 wt% silica gel filler particles into novel ionic cross-linked polyether (IXPE) polymers. Porous silica gel has the advantage of high surface area that can increase the free volume and permeability in a polymer film while also being commercially available and low cost. The MMMs featured high chemical and thermal stability as well as a modest improvement in storage modulus. These features are due to the excellent interfacial interaction between silica gel filler particles and the polymer matrix. Increasing the loading of silica gel particles in MMMs resulted in higher permeability up to 120 Barrer for CO 2 , which is about 40% higher than the neat polymer matrix. Finally, most importantly, the MMMs maintained a very high CO 2 /N 2 selectivity performance of around 41 for all particle loadings that were tested.

36 MATERIALS SCIENCE↗

The Synthesis, Structures, and Chemical Properties of Macrocyclic Ligands Covalently Bonded into Layered Arrays

In this part of the proposal we have concentrated on the surface functionalization of α-zirconium phosphate of composition Zr(O3POH)2•H2O. It is a layered compound that can be prepared as particles as small as 30 nm to single crystals in the range of cm. This compound is an ion exchanger with a capacity of 6.64 meq per gram. It finds use as a catalyst, proton conductor, sensors, biosensors, in kidney dialysis and drug delivery. By functionalizing the surface additional uses are contemplated as will be described. The layers consist of the metal, with 4+ charge, that is positioned slightly above and below the mean layer plane and bridged by three of the four phosphate oxygens. The remaining POH groups point into the interlayer space creating double rows of POH groups but single arrays on the surface layers. The surface groups are reactive and we were able to bond silanes, isocyanates, epoxides, acrylates ` and phosphates to the surface POH groups. The layers are easily exfoliated or filled with ions by ion exchange or molecules by intercalation reactions. Highlights of our work include, in addition to direct functionalization of the surfaces, replacement of the protons on the surface with ions of different charge. This allows us to bond phosphates, biophosphates, phosphonic acids and alcohols to the surface. By variation of the ion charge of the ions that replace the surface protons, different surface structures are obtained. We have already shown that polymer fillers, catalysts and Janus particles may be prepared. The combination of surface functionalization with the ability to insert molecules and ions between the layers allow for a rich development of numerous useful other applications as well as nano-surface chemistry.

36 MATERIALS SCIENCE↗

Determination of Trace Silicone Contamination on Composites by Quantitative XPS and LIBS

Surface treatment and surface characterization techniques are critical to ensure that adherends are chemically activated and free of contaminants prior to adhesive bonding. Silicone contamination from mold-release agents and other sources can interfere with interfacial bonding, decreasing the durability and performance of bonded composite structures. Tools and methods are needed that can be used in a production environment to reliably detect low levels of contaminants in a rapid, simple, and cost-effective manner to improve bond reliability. In this work, surface characterization of carbon fiber reinforced polymer (CFRP) composites was performed using laser induced breakdown spectroscopy (LIBS) and the results were compared with those obtained from X-ray photoelectron spectroscopy (XPS). The objective was to investigate the ability to quantify the surface species measured by LIBS since it offers many advantages over XPS in terms of ease of use, sample preparation, and real-time results. The as-processed CFRP panels had trace surface silicone contamination from the fabrication process, the source of which was not investigated. The composites were laser treated at select average laser power levels, resulting in varying levels of contamination reduction. The Si atomic percentage measurements using XPS were conducted both before and after laser ablation. The XPS results were compared with those obtained from LIBS to assess the reliability of each technique for surface contaminant characterization. The results showed an excellent correlation in Si atomic concentration between the two techniques.

Ledesma, Rodolfo↗

Structure of vanadium oxide supported on ceria by multi-wavelength Raman spectroscopy

ABSTRACT The structure of vanadium oxide species supported on ceria (VOx/CeO2) was investigated under various conditions by in situ multi-wavelength Raman spectroscopy, IR spectroscopy, isotopic labeling and temperature programmed reduction (TPR). For the first time, the detailed structure of dehydrated VOx species was revealed on the polycrystalline ceria support. VOx species can co-exist on ceria surface in the structure of monomer, dimer, trimer, polymer, crystalline V2O5 and CeVO4 as a function of VOx loading. These species interact strongly with both the defect sites and labile surface oxygen of ceria, passivating the redox property of ceria. Under ambient condition, the dispersed VOx species are hydrated into polyvanadate species which can be reversibly dehydrated back to the original structure forms. The ceria support with defect sites facilitates the interaction between water (H218O) and V16Ox species, leading to very facile isotopic oxygen exchange between the two even at room temperature. During H2 reduction, both the VOx species and the ceria support can be reduced with ceria surface being more reducible. The reducibility of various dispersed VOx species scales with their polymerization degree, i.e., polymer > trimer > dimer > monomer. The reoxidation of reduced VOx species is found to proceed via ceria lattice oxygen instead of the gas phase oxygen where ceria acts as an oxygen buffer. The revealed structure evolution of surface VOx species on ceria under hydrated, dehydrated, reduced, and regenerated conditions provides a basis for understanding the vanadia-ceria catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Role of Particle Size and Polymer Length in Rheology of Colloid–Polymer Composites

The effect of particle size on the flow properties of composite melts is explored. In this study we investigate a system composed of silica particles with diameter D c = 127–730 nm in unentangled poly(ethylene glycol) of two molecular weights (400 with degree of polymerization ~9 and 2000 with degree of polymerization of 45). At low concentration, silica particles are stabilized by the adsorbed polymer layer as indicated by intrinsic viscosities slightly larger than the Einstein value of 2.5. Huggins coefficients indicate that at low concentration in PEG400 the particles behave very much like hard spheres, while in PEG2000 the particles experience very weak attractions. At high volume fraction, the absorbed polymer layers begin to interact such that hard-sphere scaling no longer applies to linear and nonlinear rheological responses. In PEG2000, at elevated volume fractions, the particles with stronger attractions experience kinetic arrest with average particle surface separations much larger than the polymer radius of gyration, R g . We show that the linear rheology, yielding behavior, and shear thickening response of dense composites are varied with R g / D c , with volume exclusion glass formation observed at low R g / D c and gelation at high R g /D c , and with yielding and shear thickening properties changed by R g and D c independently. The polymer layers are found to alter the approach to the jamming transition even for R g / D c as small as 6 × 10 –3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dry efficient cleaning of poly-methyl-methacrylate residues from graphene with high-density H{sub 2} and H{sub 2}-N{sub 2} plasmas

Graphene is the first engineering electronic material, which is purely two-dimensional: it consists of two exposed sp{sup 2}-hybridized carbon surfaces and has no bulk. Therefore, surface effects such as contamination by adsorbed polymer residues have a critical influence on its electrical properties and can drastically hamper its widespread use in devices fabrication. These contaminants, originating from mandatory technological processes of graphene synthesis and transfer, also impact fundamental studies of the electronic and structural properties at the atomic scale. Therefore, graphene-based technology and research requires “soft” and selective surface cleaning techniques dedicated to limit or to suppress this surface contamination. Here, we show that a high-density H{sub 2} and H{sub 2}-N{sub 2} plasmas can be used to selectively remove polymeric residues from monolayer graphene without any damage on the graphene surface. The efficiency of this dry-cleaning process is evidenced unambiguously by a set of spectroscopic and microscopic methods, providing unprecedented insights on the cleaning mechanisms and highlighting the role of specific poly-methyl-methacrylate residues at the graphene interface. The plasma is shown to perform much better cleaning than solvents and has the advantage to be an industrially mature technology adapted to large area substrates. The process is transferable to other kinds of two-dimensional material and heterostructures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Correlating the Microstructure of Thin Films of Poly(5,5-Bis(3-Dodecyl-2-Theinyl)-2,2-Bithiophene With Charge Transport: Effect of Dielectric Surface Energy And Thermal Annealing

Poly[5,5{prime}-bis(3-dodecyl-2-thienyl)-2,2{prime}-bithiophene] (PQT-12) is a conjugated polymer that shows promising performance ({micro} > 0.1 cm{sup 2}/V s) as a semiconductor for thin-film electronics. The electrical properties of PQT-12 thin films can vary by over 3 orders of magnitude depending on the chemistry of the substrate onto which they are deposited and on annealing conditions. The highest mobility is obtained in films annealed on a dielectric treated with a self-assembled monolayer of octadecyltrichlorosilane (OTS). Polymeric thin films were processed from either a solution of dissolved PQT-12 molecules in 1,2-dichlorobenzene or from a nanoparticle dispersion of the polymer in the same solvent (nPQT-12). In addition, the substrate surface chemistry was altered by spin coating on a bare SiO{sub 2} dielectric or on SiO{sub 2} treated with OTS. The microstructure of the two forms of polymer, as characterized using specular and grazing x-ray diffraction in addition to rocking curves, was compared and correlated with the electrical performance of the films as active layers in thin-film transistors. As-spun films of nPQT-12 are always more crystalline than those of PQT-12, independent of substrate chemistry. Consequently, carrier mobility in as-spun films is higher in nPQT-12 than in PQT-12. The presence of the OTS monolayer at the polymer/dielectric interface increases crystallinity of both PQT-12 and nPQT-12, without significantly affecting their texture. After annealing, the mobility in PQT-12 films and nPQT-12 films is comparable. Annealing causes the polymer films on OTS to undergo crystallite growth in the direction normal to the substrate. In nPQT-12, growth of the crystalline coherence length in the {pi}-{pi} stacking direction (i.e., parallel to the substrate and in the direction of charge transport) occurs as well. The mobility increase in nPQT-12 on OTS upon annealing is thus attributed to the higher crystallinity of the film. In PQT-12 films deposited on OTS on the other hand, annealing causes a decrease in the out-of-plane misorientation of neighboring crystallites without any significant grain growth in the plane of the film. The mobility increase in PQT-12 on OTS upon annealing is attributed to a better intergrain connectivity, in agreement with electrical modeling of the transistor characteristics using a mobility edge model.

36 MATERIALS SCIENCE↗

Solution-based electrical doping of organic photovoltaics with non-fullerene acceptors facilitated by solvent vapor pre-treatment

Solution-based electrical doping of organic semiconductors using 12-molybdophosphoric acid (PMA) hydrate has been shown to allow p-type doping of conjugated polymers over a limited depth from the surface, enabling the fabrication of organic solar cells with a simplified device architecture. However, the doping level of certain conjugated polymers using PMA was found to be limited by the polymer film volume. Here, we report a modified PMA doping technique based on film volume expansion that is applicable to device fabrication, leading to hole-collecting layer-free non-fullerene organic photovoltaic devices, which exhibit a comparable photovoltaic performance to those with a commonly evaporated MoO3 hole-collecting layer.

Materials Science↗