Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Spinel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Stabilization of ZnMnO3 Phase from Sol-gel Synthesized Nitrate Precursors

The stabilization and analysis of pure ZnMnO3 spinel phase may help to understand the solubility limits of Mn in ZnO in wurtzite and spinel cubic structures. In this report, synthesis and characterization of stable ZnMnO3 phase is discussed which is extracted from sol-gel synthesis of zinc and manganese nitrate precursors. The reflections at higher diffraction angles for this known cubic system with space group Fd3m were calculated with the help of JADE 8.0 program. High resolution X-ray photoelectron spectroscopy measurements of Mn3p position of ZnMnO3 compared with ZnMn2O4 showed a higher binding energy shift ~0.85 eV indicating Mn4+ valence state in ZnMnO3.

36 MATERIALS SCIENCE↗

Simultaneous Modification of Alumina and MgO·Al{sub 2}O{sub 3} Inclusions by Calcium Treatment During Electroslag Remelting of Stainless Tool Steel

Calcium modification of both alumina and MgO·Al{sub 2}O{sub 3} inclusions during protective gas electroslag remelting (P-ESR) of 8Cr17MoV stainless steel and its effect on nitrides and primary carbides were studied by analyzing the transient evolution of oxide and sulfide inclusions in the P-ESR process. The oxide inclusions that were not removed during P-ESR without calcium treatment were found to retain their original state until in as-cast ingot. Calcium treatment modified all MgO·Al{sub 2}O{sub 3} and alumina inclusions that had not been removed in the P-ESR process to liquid/partially liquid CaO-Al{sub 2}O{sub 3}-(MgO) with uniformly distributed elements, in addition to a small proportion of partially modified inclusions of a CaO-MgO-Al{sub 2}O{sub 3} core surrounded by a liquid CaO-Al{sub 2}O{sub 3}. The modification of low-MgO-containing MgO·Al{sub 2}O{sub 3} inclusions involves the preferential reduction of MgO from the MgO·Al{sub 2}O{sub 3} inclusion by calcium and the reaction of calcium with Al{sub 2}O{sub 3} in the inclusion. It is the incomplete/complete reduction of MgO from the spinel by calcium that contributes to the modification of spinels. Alumina inclusions were liquefied by direct reaction with calcium. Calcium treatment during P-ESR refining also provided an effective approach to prevent the formation of nitrides and primary carbides in stainless steel through modifying their preferred nucleation sites (alumina and MgO·Al{sub 2}O{sub 3} inclusions) to calcium aluminates, which made no contribution to improving the steel cleanliness.

36 MATERIALS SCIENCE↗

Experimental Liquidus Studies of the Pb-Fe-Si-O System in Equilibrium with Metallic Pb

Phase equilibria of the Pb-Fe-Si-O system have been investigated at 943 K to 1773 K (670 °C to 1500 °C) for oxide liquid in equilibrium with liquid Pb metal and solid oxide phases: (a) quartz, tridymite, or cristobalite; (b) (fayalite + tridymite) or (fayalite + spinel); (c) spinel (Fe{sub 3}O{sub 4}); (d) complex lead-iron silicates (melanotekite PbO·FeO{sub 1.5}·SiO{sub 2}, barysilite 8PbO·FeO·6SiO{sub 2}, 5PbO·FeO{sub 1.5}·SiO{sub 2}, and 6PbO·FeO{sub 1.5}·SiO{sub 2}); (e) lead silicates (Pb{sub 2}SiO{sub 4}, Pb{sub 11}Si{sub 3}O{sub 17}); (f) lead ferrites (magnetoplumbite Pb{sub 1+x}Fe{sub 12−x}O{sub 19−x} solid solution range); and (g) lead oxide (PbO, massicot). High-temperature equilibration on primary phase or iridium substrates, followed by quenching and direct measurement of Pb, Fe, and Si concentrations in the phases with the electron probe X-ray microanalysis, has been used to accurately characterize the system in equilibrium with Pb metal. All results are projected onto the PbO-“FeO”-SiO{sub 2} plane for presentation purposes. The present study is the first systematic characterization of liquidus over a wide range of compositions in this system in equilibrium with metallic Pb.

36 MATERIALS SCIENCE↗

Evolution Mechanism of Oxide Inclusions in Titanium-Stabilized AISI 443 Stainless Steel

The evolution mechanism of oxide inclusions in Ti-bearing AISI 443 stainless steel was investigated by industrial experiment and thermodynamic calculation. The chemical compositions of steel and the characteristics of inclusions in steel were analyzed. After the addition of Al, the main type of inclusions in molten steel was irregular MgO·Al{sub 2}O{sub 3} spinel. The MgO·Al{sub 2}O{sub 3} inclusions were modified to be spherical CaO-Al{sub 2}O{sub 3}-MgO inclusions after calcium treatment. Thermodynamic calculation results indicated that several ppm Ca could significantly expand the liquid oxide phase field and decrease the stability of spinel. After titanium addition, two types of inclusions were formed: spherical Al{sub 2}O{sub 3}-TiO{sub x} inclusions and complex CaO-TiO{sub x}-Al{sub 2}O{sub 3}-MgO inclusions. The compositions of steel after Ti addition were mostly located in Al{sub 2}O{sub 3}-TiO{sub x} stability phase field. Based on the characteristics of inclusions in steel and thermodynamic calculation, inclusions consisting of liquid and CaTiO{sub 3} were formed in molten steel with more than 10 ppm Ca during the Ti addition process. The evolution mechanism of oxide inclusions was discussed with the consideration of the initial calcium content before Ti addition.

36 MATERIALS SCIENCE↗

Critical Evaluation and Thermodynamic Optimization of the Li{sub 2}O-Al{sub 2}O{sub 3} and Li{sub 2}O-MgO-Al{sub 2}O{sub 3} Systems

The thermodynamic and phase diagram data of the Li{sub 2}O-Al{sub 2}O{sub 3} and Li{sub 2}O-MgO-Al{sub 2}O{sub 3} systems were critically evaluated and optimized to obtain a set of consistent Gibbs energy functions for all phases in the systems. The LiAl{sub 5}O{sub 8}-MgAl{sub 2}O{sub 4} spinel solid solution was modeled with the two-sublattice compound energy formalism by considering the cation distribution between the tetrahedral and octahedral sites and excess vacancy in octahedral sites. The liquid phase and monoxide solid solution were also described using the modified quasichemical model with pair approximation and the Bragg–Williams random mixing model, respectively. The thermodynamic models with optimized model parameters enable the reproduction of all reliable thermodynamic and phase diagram as well as spinel structural data in the system.

36 MATERIALS SCIENCE↗

Bimetallic Ni-Rh catalysts with low amounts of Rh for the steam and autothermal reforming of n-butane for fuel-cell applications.

Mono-metallic nickel and rhodium catalysts and bimetallic Ni-Rh catalysts supported on La-Al{sub 2}O{sub 3}, CeZrO{sub 2} and CeMgOx were prepared and evaluated for catalyzing the steam and autothermal reforming of n-butane. The binary Ni-Rh supported on La-Al{sub 2}O{sub 3} catalysts with low weight loading of rhodium exhibited higher H{sub 2} yields than Ni or Rh alone. The Ni-Rh/CeZrO{sub 2} catalyst exhibited higher performance and no coke formation, compared to the same metals on other supports. A NiAl{sub 2}O{sub 4} spinel phase was obtained on all Ni and Ni-Rh catalysts supported on La-Al{sub 2}O{sub 3}. The presence of rhodium stabilized the spinel phase as well as NiOx species upon reforming while Ni alone was mostly reduced into metallic species. Extended X-ray absorption fine-structure analysis showed evidence of Ni-Rh alloy during preparation and even further after an accelerated aging at 900C in a H{sub 2}/H{sub 2}O atmosphere.

01 COAL, LIGNITE, AND PEAT↗

Reduction kinetics of hercynite redox materials for solar thermochemical water splitting

Solar thermochemical water splitting (STWS) using a hercynite redox cycle is a promising technology for producing renewable H 2 . Here, the reduction kinetics of hercynite (FeAl 2 O 4 ) is evaluated using thermogravimetric and XRD analyses. The results indicate that as-prepared hercynite materials undergo reduction via two different reaction mechanisms. The reaction first proceeds by a nucleation and growth mechanism (AE1), followed by a third-order kinetic model (F3). XRD analyses show the occurrence of superstoichiometric oxygen in the spinel structure of FeAl 2 O 4+δ in the second reaction mechanism, which indicates the formation of cationic vacancies. TGA and XRD analyses confirm that hercynite maintains its spinel structure when the materials are thermally reduced and oxidized with steam. Differential scanning calorimetry (DSC) performed on FeAl 2 O 4 particles shows two heats of reaction in agreement with the two observed mechanisms. This is the first kinetics study to report on the thermal reduction of hercynite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of electronic transport on electrochemical performance of (Cu,Mn) 3 O 4 solid oxide fuel cell cathodes

Alkaline Earth free spinel oxides provide a potential benefit over Sr-doped perovskite-based materials commonly used as electrodes in high-temperature electrochemical energy conversion devices, e.g., solid oxide fuel cells (SOFCs). Sr-segregation is a known issue leading to performance degradation. In this study, Cu x Mn 3-x O 4 (x = 1, 1.2, and 1.5) porous electrodes were examined as SOFC cathodes using electrochemical impedance spectroscopy to investigate the oxygen reduction reaction (ORR) kinetics in relation to the material's intrinsic conductivity, the extrinsic electrode structure, and the cell test design. Similar to the electronic conducting (La,Sr)MnO 3 SOFC cathodes, the ORR kinetics of Cu x Mn 3-x O 4 spinel electrodes was governed by the oxygen adsorption and diffusion at the particle surface as well as the charge transfer at the triple phase boundaries. The overall electrode polarization resistance was highly dependent on contact density with the metallic current collector, active material particle connectivity, electrode thickness, and the intrinsic electronic materials conductivity. Here, we describe the importance of effective electronic charge transport parallel to the electrode surface in maximizing the electrochemically active electrode volume and enhancing electrode performance. We discuss an approach to optimize cell and electrode design with respect to active materials properties. This aspect is critical to ensure reliable evaluation of new materials, since laboratory-scale button-cells typically exhibit a high degree of electrode microstructure (e.g. porosity, thickness) and electrical contact density variation from sample to sample.

(Cu,Mn)3O4↗

Growth of Nanoscale Nickel Ferrite on Carbonaceous Matrix- A Novel Method of Turning Harmful Particulates into a Functional Nanocomposite: An XAFS Study

Particulate matter (PM) emission from residual oil combustion typically consists of carbonaceous material accompanied by inorganic matter notably transition metal sulfates. Often a minor sulfide form is found in the coarse fraction while an oxide form is more common in the fine and ultrafine fractions. A composite comprising of nanoscale nickel ferrite dispersed on carbonaceous matrix has been obtained following liberation of metal sulfates from the fine PM - a novel method of turning harmful particulates into a functional nanocomposite without the need for elaborate preparation using expensive precursors. The nickel ferrite content in the composite varies with the Fe/Ni ratio in particulate, fuel type, and combustion condition. Such variation may lead to the composite exhibiting diverse physical behaviors. Detailed structure and cation distribution in dispersed ferrite have been studied using Fe and Ni K-edges XAFS spectroscopy. Peaks are identified in the radial structure function with specific atom pair correlations within the spinel ferrite from which the relative occupancy of the cations in the octahedral and tetrahedral sites can be discerned. The results show that Ni(II) has strong preference for the octahedral site, while Fe(III) prefers both sites which is consistent with that of an inverted spinel ferrite.

02 PETROLEUM↗

Microstructural investigation of LixNi1/3Mn1/3Co1/3O2 (x 1) and its aged products via magnetic and diffraction study

The thermal stability of the layered oxide LiNi1/3Mn1/3Co1/3O2 and its delithiated product is studied by a combination of x-ray and electron diffraction, TEM imaging and magnetic measurements. Diffraction shows that a small fraction of the layered material converts to spinel phase following delithiation. More spinel phase is observed after thermal annealing. The morphology of the particle changes upon thermal annealing of delithiated materials. The selected area electron diffraction and the magnetic measurement results confirm the presence of Ni+2/Li+ disorder in the delithiated material, which increases upon thermal ageing. The oxidation states of the transition metal ions were determined from magnetic data. It is shown that the charge balance due TO removal of Li+ is maintained through oxidation of Ni+2 and that the oxidation states remain stable during subsequent annealing. No anti-ferromagnetic ordering or crystallographic in plane ordering of transition metal ions is observed. These results clearly describe the thermal degradation of LixNi1/3Mn1/3Co1/3O2 (x 1) occur through the significant microstructural changes.

99 GENERAL AND MISCELLANEOUS↗

Development of manganese-rich cathodes as alternatives to nickel-rich chemistries

High-energy, inexpensive and safe electrochemistries have been the main goals of lithium-ion battery research for many years. Historically, manganese-based cathodes have long been studied for their attractive cost and safety characteristics [1]. However, due to issues related to both surface and bulk instabilities, manganese-rich electrodes have yet to find substantial success in the high-energy lithium-ion battery market. With current trends in cathode chemistries leaning heavily toward Ni-rich compositions, the factors of cost and safety are again at the forefront of research and development efforts. This paper reports the recent progress made at Argonne National Laboratory (USA) to stabilize manganese-rich cathode structures and surfaces with a specific focus on composite materials with intergrown layered and spinel components; it presents an overview of their electrochemical properties in terms of capacity, energy, and cycle-life in cells with metallic lithium, graphite, and Li 4 Ti 5 O 12 anodes. These layered-spinel cathodes show promise as alternatives to highly nickel-rich electrode compositions, which bodes well for continued advances.

25 ENERGY STORAGE↗

Synthesis of Cd/(Al+Fe) layered double hydroxides and characterization of the calcination products

Layered double hydroxides (LDHs) containing Cd(II), Al(III), and Fe(III) in the brucite-like layers with different starting Fe/Al atomic ratios and with nitrate as counteranion have been prepared following the coprecipitation method at a constant pH value of 8. An additional Cd(II),Al(III)-LDH sample interlayered with hexacyanoferrate(III) ions has been prepared by ionic exchange at pH 9. The samples have been characterized by elemental chemical analysis, powder X-ray diffraction (PXRD), and FT-IR spectroscopy. Their thermal stability has been assessed by thermogravimetric and differential thermal analyses (TG-DTA) and mass spectrometric analysis of the evolved gases. The PXRD patterns of the solids calcined at 800 deg. C show diffraction lines corresponding to Cd(Al)O and spinel-type materials, which precise nature (CdAl{sub 2}O{sub 4}, Cd{sub 1-x}Fe{sub 2+x}O{sub 4}, or Cd{sub x}Fe{sub 2.66}O{sub 4}) depends on location and concentration of iron in the parent material or precursor. - Graphical abstract: Layered double hydroxides (LDHs) containing Cd(II), Al(III), and Fe(III) in the brucite-like layers with different starting Fe/Al atomic ratios and with nitrate as counteranion have been prepared following the coprecipitation method. An additional Cd(II),Al(III)-LDH sample interlayered with hexacyanoferrate(III) ions has been prepared by ionic exchange. Calcination at 800 deg. C shows diffraction lines corresponding to CdO and to spinel-type materials. SEM micrograph of sample CdAlFe-N-0.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First-principles investigation of R{sub 2}O{sub 3}(ZnO){sub 3} (R=Al, Ga, and In) in homologous series of compounds

Atomic and electronic structures of R{sub 2}O{sub 3}(ZnO){sub 3} (R=Al, Ga, and In), which are included in homologous series of compounds, are investigated using first-principles calculations based on density functional theory. Three models with different R atom arrangements in the five-fold and four-fold coordination sites are examined. Al and Ga prefer the five-fold coordination sites. The formation energies are much larger than those of the competing phases, ZnR{sub 2}O{sub 4}, with a normal spinel structure. On the other hand, In{sub 2}O{sub 3}(ZnO){sub 3} shows no clear site preference and can be more stable than the spinel at high temperatures when configurational entropy contribution is taken into account. Electronic states near the conduction band bottom are mainly composed of Zn-4s orbital in Al{sub 2}O{sub 3}(ZnO){sub 3}, while the contributions of Ga-4s and In-5s are comparable to Zn-4s in Ga{sub 2}O{sub 3}(ZnO){sub 3} and In{sub 2}O{sub 3}(ZnO){sub 3}. - Graphical abstract: R{sub 2}O{sub 3}(ZnO){sub 3} (R=Al, Ga, and In) in homologous series of compounds are investigated using first-principles calculations with special interest on preferred occupation sites of R, relative energetics with competing phases and electronic structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal chemistry of Co-doped Zn{sub 7}Sb{sub 2}O{sub 12}

Zn{sub 7}Sb{sub 2}O{sub 12} forms a full range of Co-containing {alpha} solid solutions, Zn{sub 7-x}Co{sub x}Sb{sub 2}O{sub 12}, with an inverse-spinel structure at high temperature. At low temperatures for x<2, the solid solutions transform into the low temperature {beta}-polymorph. For x=0, the {beta}{yields}{alpha} transition occurs at 1225{+-}25 deg. C; the transition temperature decreases with increasing x. At high x and low temperatures, {alpha} solid solutions are formed but are non-stoichiometric; the (Zn+Co):Sb ratio is >7:2 and the compensation for the deficiency in Sb is attributed to the partial oxidation of Co{sup 2+} to Co{sup 3+}. From Rietveld refinements using ND data, Co occupies both octahedral and tetrahedral sites at intermediate values of x, but an octahedral preference attributed to crystal field stabilisation, causes the lattice parameter plot to deviate negatively from the Vegard's law. Sub-solidus compatibility relations in the ternary system ZnO-Sb{sub 2}O{sub 5}-CoO have been determined at 1100 deg. C for the compositions containing {<=}50% Sb{sub 2}O{sub 5}. - Graphical abstract: Zn{sub 7}Sb{sub 2}O{sub 12} forms a full range of Co-containing {alpha} solid solutions, Zn{sub 7-x}Co{sub x}Sb{sub 2}O{sub 12}, with an inverse-spinel structure at high temperature. From the Rietveld refinement using ND data, Co occupies both octahedral and tetrahedral sites at intermediate values of x, but an octahedral preference attributed to crystal field stabilisation, causes the lattice parameter plot to deviate negatively from the Vegard's law.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and magnetic properties of Zn{sub 1-x}Sb{sub x}Cr{sub 2-x/3}Se{sub 4} (x=0.11, 0.16 and 0.20) single crystals

Single crystals of Zn{sub 1-x}Sb{sub x}Cr{sub 2-x/3}Se{sub 4} based on the ZnCr{sub 2}Se{sub 4} spinel, which is known to exhibit interesting magnetic and electronic transport properties, have been prepared by solid state reaction from the appropriate selenides. Three compounds of different Sb content (x=0.11, 0.16, and 0.20) were studied by X-ray diffraction, X-ray photoelectron scattering technique and macroscopic magnetic measurements with the aim to determine (i) stability of the cubic symmetry and (ii) influence of the Sb admixture on the magnetic properties. The results show that the Sb{sup 3+} and Zn{sup 2+} ions share the tetrahedral sites in the spinel structure, while the Cr{sup 3+}ions carrying magnetic moments, are located in the octahedral sites. The X-ray photoelectron spectroscopy (XPS) data indicate that in this series of compounds the chromium ions have a 3d{sup 3} electronic configuration. The three samples studied order antiferromagnetically at low temperatures, with the magnetic characteristics being hardly altered with respect to those reported for the parent ZnCr{sub 2}Se{sub 4} compound. - Graphical abstract: XPS spectrum of Cr2p core-levels in the (Zn{sub 1-x}Sb{sub x})[Cr{sub 2-x/3}]Se{sub 4} system (x=0.11, 0.16 and 0.20).0.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The role of orbital ordering in the tetragonal-to-cubic phase transition in CuCr{sub 2}O{sub 4}

Copper(II) chromite (CuCr{sub 2}O{sub 4}) undergoes a first-order structural transition from a tetragonal distorted spinel structure in space group (I4{sub 1}/amd) to a cubic spinel structure in Fd3-bar m, near 600 deg. C. The transition has been followed using synchrotron X-ray powder diffraction between room temperature and 750 deg. C. The structure changes as a consequence of a transition from an orbitally ordered to orbital disordered state associated with a Jahn-Teller-type distortion of the CuO{sub 4} tetrahedron. The orbital melting results in a small increase in cell volume. - Graphical abstract: The first-order tetragonal-cubic phase transition in CuCr{sub 2}O{sub 4} is accompanied by a noticeably reduction in cell volume associated with the loss of orbital ordering present in the low-temperature Jahn-Teller distorted tetragonal structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Temperature dependence of the cation distribution in ZnFe{sub 2}O{sub 4} measured with high temperature neutron diffraction

ZnFe{sub 2}O{sub 4} has a spinel-type structure with Zn{sup 2+} ions located mainly on tetrahedral sites and Fe{sup 3+} ions located on octahedral sites. ZnFe{sub 2}O{sub 4} was synthesized in air by a solid state reaction and characterized with X-ray diffraction, high temperature neutron diffraction, resistivity measurements and dilatometry. The distribution of cations in ZnFe{sub 2}O{sub 4} was measured from 298 to 1243 K and results show that above 673 K the cations start to redistributed in the structure. ZnFe{sub 2}O{sub 4} has a semi-conducting behavior at room temperature, but at temperatures above 905 K the conductivity decreases as the result of an Fe-Fe interaction between octahedral sites. - High temperature in situ neutron powder diffraction, dilatometry and resistivity measurements was performed on the spinel-type oxide ZnFe{sub 2}O{sub 4}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of crystal structure on the Co{sup II} diffusion behavior in the Zn{sub 1-x}Co{sub x}O system

The solid state interaction of the Zn{sub 1-x}Co{sub x}O nominal system is investigated by means of diffusion couples and analysis of co-precipitated samples. The formation of a homogeneous Co:ZnO solid solution is found to be determined by the crystal structure from which Co{sup II} ions diffuse into the wurtzite lattice. No diffusion is observed whenever the CoO rock-salt structure is formed from the Co{sup II} precursor. On the contrary, the diffusion from the Co{sub 3}O{sub 4} spinel phase is feasible but has a limited temperature range defined by the reduction at a high temperature of Co{sup III}-Co{sup II}, since this process again leads to the formation of the rock-salt structure. However, when using a highly reactive and homogeneous co-precipitated starting powder, neither the spinel phase nor the rock-salt structure is formed, and a Co{sup II}:ZnO solid solution is obtained, which remains stable up to high temperatures. - Graphical abstract: Maximum diffusion distance for the ZnO-CoO{sub x} couple as a function of temperature. Dashed gray lines represent the temperature values at which the transformations between CoO and Co{sub 3}O{sub 4} compounds take place.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗